Siri no longer functions with ios 6.1

I have an iphone4s that I just upgraded the IOS from 6.01 to 6.1 and Siri no longer functions.   It just freezes at "what can I help you with" and never does anything or it indicates by voice that there is a problem.   Cell WIFI and local WIFI are functioning normally.

I just figured it out, I went into settings and turned Siri off and back on and it seemed to trigger it into working.

Similar Messages

  • TS2755 Messages no longer works with iOS 6.

    Messages no longer works with iOS 6. Done all the checks, everything that's recommended. Zilch

    Had the same problem after updating to ios 6 could not send-recieve text messages at all. Did a restore on  iphone same problem, changed setting same problem. called at&t they said they is a problem the ios 6 that changes setting at att  take techline 15 minutes and imessage and text messages working ok

  • Why is iPhone 5 no longer functioning with AirDrop

    Is there a reason iPhone 5 no longer functioning with AirDrop when it did before?

    After managing to get it to charge 100%, i realise the connector in the iphone is lose, it moves from left to right, only charges when moving to the right, def a lose connection on iphone. Speaking to customer services

  • Active Sync certificates no longer work with iOs 4.3

    Existing Active Sync certificates no longer work with iOs 4.3. Can I fix this?

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Ipod out no longer works with iOS 6.1

    As the title suggests, after updating my iPhone 5 to iOS 6.1 the iPod out function no longer works with connected devices. With the previous version, I could hook up my Kenwood car stereo using the lightning to 30 pin adapter and the stereo would "Read" my iPhone and begin playing the first track of my music collection. I also had song, artist and playlist search support.
    Now, all I get is a constant "Reading" indicator and can't get past this point.
    Is anyone else having any experiences similar to this and does anyone have any suggestions to fix it?
    Thanks

    Try this.
    Go to Settings>General>Date and Time>Set Automatically>Off.
    Set the date one year ahead. Try to get email.
    If you get an error message, go back to the settings. Correct the date and time (set automatically) then go back and try to get email again.

  • Smart Playlists no longer updated with iOS 4.3 on iPhone 4

    I've run into an issue with the latest iOS 4.3 update: my smart playlists are no longer dynamically being updated on my iPhone 4.
    All of my main playlists are smart: they exclude songs that I've played in the past week. Earlier today when I'd play a song and it went to the next one, it'd immediately remove the song from the playlist (so I was always on track 1 of XXX). With 4.3, this is no longer happening and the smart playlist only dynamically updates when I sync my phone with my computer. This is annoying because it means that I can end up hearing the same song again if I switch playlists.
    Anyone else run into this? Any fixes? I tried rebooting my phone to no avail.

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Apple tv second generation will no longer function with netflix

    My apple tv won't function with my netflix anymore and i cannot figure out why every film i select it states this error message
    A network error has occured and this title cannot be played or found at this time.
    i know my internet is working just fine and yes i updated to the latest apple tv version but nothing netflix won't work but everything else does what gives could this be because netflix updated to a new version and apple tv hasn't updated to the new version of netflix yet???

    Yes i did reboot same error message and the latest version of the netflix streaming app is 2.37 on all ios devices including apple tv but they went to netflix version 2.38 on ps3 and xbox 360 so now it doesnt work on netflix at all i found this out after talking to netflix customer support.

  • Kobo app no longer compatibile with IOS 6 IPOD touch

    The updated version of Kobo App is no longer compatible with my IPOD Touch 4th generation (IOS 6).  Can I find an earlier, compatible version of the Kobo app to reinstall it on my IPOD touch?  Or is there any possibility of upgrading to IOS 7 without having to buy a new IPOD Touch?

    Guys, I've just tried this and it worked for me. I'll post an update if it stops working, but it appears having 2-step authorisation is mandatory on iOS 6
    http://www.youtube.com/watch?v=mP0UaTMxGCY&hd=1

  • The latest iTunes wiped out my apps for my 2G iPod Touch by overwriting updates which are no longer compatible with iOS 4.2.  I tried to restore to an earlier version with no success.  Is there any way to download the older versions of apps which are comp

    The latest iTunes software wiped out my apps for my 2G iPod Touch by overwriting newer releases of the apps which are not compatible with iOS 4.2.1.  I tried to restore the iPod to an earlier version without success.  Is there any way to download older versions of my apps which are compatible with my older iPod?

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

  • Recording Software No Longer Functional with Leopard

    All audio editing software (which previously worked fine) on my machine no longer runs with Leopard installed. Software affected by the "upgrade" include:
    -Steinberg's Cubase
    -Audacity
    -Ableton Live
    Are there patches for this extremely aggravating glitch in Leopard?

    All those apps will probably soon have updates to make them Leopard-compatible. Check developers' web sites.

  • IPad 2 hdmi connector no longer works with iOS 7.3

    Hi any one else had this issue? I have always connected my iPad 2 to my tv via a apple made hdmi connector, used mainly for fils on netflix eat. Since firmware updated to 7.3 this no longer works. Is this anther apple issue? My wife has an iPad 3, pre lightening and the "official" adapter has never works just get a message that states the attached accessory is not supported.... Any ideas anyone???

    I have an ipad 2 running ios 6.0.1 and an older Dell TV (1080i) and have always been able to mirror.  Running ios 5 the mirroring worked perfectly for sound and video.  Don't remember if I tried while running 5.1.  Now that I have 6.0.1, I can still mirror, but the whole screen is pink on this Dell TV.  When I make the connection from ipad to the tv, mirroring starts immediately and the notification bar on the ipad home screen pulsates from blue to black and the cable is detected.  I have sound and video working fine except for the colors.  The ipad detects the AV Composite cable under settings>about but there is no TV out setting under General Settings where I'm supposed to see TV OUT listed under iTunes Wi-Fi sync.  I have changed the hdmi to a new one, but it didn't help.  I also have a new Panasonic Viera tv and everything (with the same cables) works perfectly on that TV.  Leads me to believe it's an issue with the TV OUT function of the ipad.  I don't know if any of this is helfpul information, but I thought it might help you narrow down what is going on with your setup.

  • Find My Phone - Secondary Account - No longer possible with iOS 7

    Hello,
    I'm guessing with the sheer number of posts following the iOS release today that this will likely get lost in the flood, but it's really really making me crazy and would love a fix if possible.
    Pre-iOS 7, I had all of the family's devices set to use the same iCloud's account for find my phone. This was achieved by adding a second account to the device, disabling find my phone on the primary account, then turning it on in the secondary account. This was perfect. One login, all devices show up.
    This no longer works as the secondary account, still listed after the upgrade, now has a note that find my phone is only available on the primary account.
    Please please please. How do I get this back?  Honestly, I'd even take it as is if you could associate multiple accounts within the find my phone app, but I don't see this as an option either.
    Thanks in advance,
    Jeff

    I found the same Jeff.
    This infuriates me!
    That was one of the draws for me to buy 5 iPhones for my entire family, one platform to support and the ability to know where everyone is.
    I really wish they would re-consider and bring this back.
    If not, I would be willing to pay for an app to allow me to use the locate feature.
    Kyle

  • AirPrint no longer works with ios 5?

    I can no longer print from my print app print n share. I used this app to
    Print my "drivers log book" app. Tech support from print n share said
    Apple took away the feature to print through all print apps that send wifi
    Straight to the printer. Why would apple do this?

    It's possible to use free software (Virtualbox and Ubuntu) to fix the broken iOS 5 Airprint printing with non supported printers.  Here's a fix that works on my imac, but should also work on even a windows pc.
    My setup is a lion imac with 2 non-airprint supported usb printers attached, a belkin wifi router that provides network connectivity for my imac, ipad, and iphone.
    Install ubuntu 11.10 in a virtualbox vm.  Specify to use the "Bridged Adapter" with "en1: WiFi (AirPort)" for the network hardware.  Make sure the imac's usb printers are setup with sharing.  On ubuntu, select System Settings > Printers and add your imac's shared printers to the list.  Then start ubuntu's firefox and set "localhost:631" in the address. On the administration tab, under the Server section, check "Share printers connected to this system" and hit Change Settings button to activate it.  Go back to ubuntu's printer setup, and right click on each printer and check that the properties Policies tab does not have any messages about it being unshared. If so, then go back to firefox and make sure the Server sharing checkbox is enabled. It may help to reboot.
    Fire up virtualbox to be able to use AirPort printing to your imac's usb printers, when you want to print from the iphone or ipad. This also works on iOS 5.
    Only problem is error message from iphone to check the printer for errors, even though it actually prints ok.
    references: 
    http://askubuntu.com/questions/26130/how-can-share-my-printer-so-that-i-can-use- it-with-airprint
    https://lists.ubuntu.com/archives/ubuntu-devel/2011-June/033611.html

  • Godaddy IMAP email no longer downloads with iOS 8.1

    no problem sending, however, no new email will download.  I rebooted, deleted account, added it (which it adds fine), it just no longer downloads email.

    I just found the following status update on godaddy's support page (https://support.godaddy.com/system-alerts/):
    IMAP/POP October 20, 2014 at 1:13 PM
    We are aware of an issue with IMAP impacting our customers. While we are fixing it, you might experience longer than normal phone support hold times. We recommend using POP or your Web Based Email in the meantime. Thanks for your patience.
    Hopefully this IMAP problem is just a coincidence and has nothing to do with the update to IOS 8.1.
    My Gmail IMAP is working fine, but no luck with GoDaddy IMAP on 8.1.
    Frustrating!

  • OfficeJet 6310xi - recognized and functional with iOS ePrint app but not AIO app. Why?

    As noted - OJ 6310xi is on same netork as other printers and all computing devices.  The iOS app "HP ePrint" recognizes and allows printing to the 6310xi.
    The AIO Remote app will find all printers on the network except the 6310xi.  The 6310xi is not WiFi enabled and is not an "ePrint" printer, but it is networked to WiFi accessible network.  Works with one app, why not the other?  Am I overlooking a setting somewhere?

    Hi MedMarkCo
    I'm sorry to hear that you are encountering difficulties connecting your printer to different apps. 
    The HP ePrint app is designed to work with your home wireless network as well as with your mobile device's data access.  As you have your printer connected directly to your router via an ethernet cable is available on your wireless network for the app to "see" the printer.  For further information on the HP ePrint app I have included a link to the HP ePrint Mobile App FAQs document.
    I have done some research on the AIO Remove app you mentioned in your post.  I have included a link to their website and they have a way for you to contact them if you need assistance or have feedback.
    AIOR All In One Remote
    http://www.aioremote.net/home
    HP ePrint Mobile App FAQs
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01923321
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for

  • Custom Application Configuration not pulling the data in E-Recruiting

    Hello, My requirement is to make some fields 'required', hide some buttons, change button texts & hide some columns in standard wd component (ERC_A_REQ_MGMT) delivered by SAP. So I created an application configuration and component configuration and

  • How to call procedure inside a procedure and need to sore the value in a variable?

    HI ALL, i am usung oracle 11g. here is my package and procedure i want  to call get_email_details this procedure inside the process_email_master and want to keep the value inside a varible in master procedure create or replace PACKAGE        ms_gen_p

  • Can Acrobat MSP files patch OEM versions of Acrobat?

    I have several computers that from Dell that have OEM versions of Acrobat standard.  I am trying to deploy Acrobat patches using group policy.  I have read the Adobe GP & AD deployment guide for instructions.  But I cannot get the patches to install.

  • Does my macpro work with SAS drive?

    I got seagate SAS drives, and tried to plugged to the mp, apparently my os doesnt see them. here is the spec Model Name: Mac Pro Model Identifier: MacPro1,1 Processor Name: Dual-Core Intel Xeon Processor Speed: 2.66 GHz Number Of Processors: 2 Total

  • Advantages and disadvantages among Timer, ScheduledExecutorService, Thread

    Hi, what are the exact advantages and disadvantages among using Timer, using ScheduledExecutorService and just using Thread (Thread.sleep(...))? For the simple task which needs to poll some values by some interval (the interval is not supposed very a