Size difference of dock for 1st and 2nd gen

Hi, I tried searching the forums but i couldn't find a specific answer to my question.
I know that the dock for the 1st and 2nd gen is at a different place, but does anyone know if the exact size has changed? That is, if i have just a plug which was made for the 1st gen nano, can this plug fit into the 2nd gen dock pins?
Any help will be great, thanks!
  Windows XP Pro  

All dock connectors are the same, so you can use the same cable.
However, you asked about the dock which is not the same as the dock connector. The dock is this.

Similar Messages

  • 1st and 2nd Gen differences?

    What are the main differences between the 1st and 2nd Gen Touch? I'm getting ready to buy a 32gb Touch, but I can't figure out what is improved on the 2G. If it's nothing major, I'm just going to get a 1G and save $50.

    also, the 1st Gens have old software on them. if you get one you'll have to pay to upgrade to 2.0 and consequential software upgrades.
    external volume buttons, longer battery life, the design is slightly different - described as 'sleek and feeling better in your hand'
    enough reasons i would have thought for you to go the whole hog and get a new one.

  • Question about firewire AC adaptor and iPod Nano (1st and 2nd gen)

    I have an AC adaptor from the Mini, model #A1070 W008A130 and I was wondering if it was compatible with both the 1st and 2nd gen Nanos.
    I've been unable to find any power specifications and just want to make sure I'm not going to burn both mine and my girlfriend's Nanos out when we charge them away from a computer.
    Thanks in advance.

    I have an AC adaptor from the Mini, model #A1070
    W008A130 and I was wondering if it was compatible
    with both the 1st and 2nd gen Nanos.
    I've been unable to find any power specifications and
    just want to make sure I'm not going to burn both
    mine and my girlfriend's Nanos out when we charge
    them away from a computer.
    Thanks in advance.
    You won't burn anything out.

  • Atv 2 1st and 2nd gen headaches

    i have an atv2 2nd gen amd an atv 2 1st gen, the 1st plays movies through itunes perfectly with no problems, the atv 2 2nd gen will not play those same movies, i have to air play from my pc to the unit for it to play.

    Is this with streaming local content or renting through iTunes?
    I was assuming you were doing the latter. If so, see below.
    If you set up the ATV to use a DNS other than your ISPs then yes that would be an issue, that's what I am trying to get at. It would not have to do with browsing but would affect streaming on the device.
    If you have set it up with the default DNS then that's fine.
    If you're using home-sharing check firewall and any anti-virus.
    Also see
    http://support.apple.com/kb/TS2972?viewlocale=en_US&locale=en_US
    As suggested take it in to see if it's a problem with your unit.

  • Both 1st and 2nd gen touchs losing video/music

    I have a first gen touch and a 2nd gen touch that are both losing music and video periodically. They are both set to manually manage music and seem fine when plugged in. After hitting the eject button in itunes sometimes they are wiped sometimes they are fine. They only work after doing a restore at which point you have to put everything back on. Both itunes and the ipod software are up to date. Is there any way to fix this?

    I have the same question
    1) ATV gen2 = good at netflix, issues with everything else
    2) ATV gen1 = good at playing movies, music, works well with apple remote, no Netflix
    i just set them both up thinking the best solution is to just flip between them with my universal remote, but that remote controls both at the same time even though only one is visible. Interestingly, the Gen3 remote doesn't mess with the Gen1 ATV.
    So how do we make it so that our universal remotes can control EACH ATV without both at the same time?

  • I am having problems streaming music to my apple tv (1st and 2nd gen). The music cuts in an out after a while of playing.  Any suggestions?

    I have a first gen apple tv and it works as advertised except for the streaming of music which would cut out/on/out......  I decided to buy a aptv2 and have the same issue.  I have tried using different wireless setups, ipod, iphone and laptop and the same issue happens.  Any suggestions?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • So am I correct in assuming that all of the Ipod touch 1st and 2nd gen are obsolete?

    I can't seem to download any apps for my second generation ipod touch. I have looked on forums and searched the internet on what to do with no avail. Please do not send me any messages saying that I cannot go any higher than iOS 4.2.1 because I know this and you will be wasting my time. Basically my question is what do the people do that own older ipods? Do we simply toss them out? I think that this is a little ridiculous, I paid for a product that I can no longer use simply because it is older.

    "Do we simply toss them out?"
    No.
    "I think that this is a little ridiculous"
    Since you don't just "throw them out", there is no "ridiculousness".
    "I paid for a product that I can no longer use simply because it is older."
    Baloney.  You can use the product, until it's no longer operational.  If it breaks, you can have it repaired outside of the warranty.

  • Ipod mini lcd difference between 1st gen and 2nd gen

    could someone verify for me the difference between lcd's. is the difference between the two the wideness of the lcd cable. ie: the first gen is smaller and the second gen is wider! am i correct? Thanks.

    Here are the differences between the 1st and 2nd gen mini.
    http://docs.info.apple.com/article.html?artnum=300850
    There's no difference in screen size.

  • I have both iPod nano 1st and 2nd generation, neither shows in iTunes since i installed yosemite, Icon shows on mac desktop , with a few empty folders inside

    I have both iPod nano 1st and 2nd Gen . Neither are appearing in iTunes since Ive installed Yosemite, both appear on desktop and iTunes launches when i plug nano in to mac

    Hi Phil.Surf 16,
    Thanks for the question. Based on what you stated, it sounds like the iPod is not in iTunes. I would recommend that you read this article, it may be able to help the issue.
    iPod not appearing in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Cheers,
    Mario

  • HT202157 What is the difference between the 1st and 2nd generation Apple TV?

    What is the main difference between the 1st and 2nd generation Apple TV's? I just got the 1st generation and was wondering if I should send back for the 2nd gen?

    There is one other difference. The ATV3 uses a new processor with a better graphic processing unit.  If you only had the ATV2 for less than 14 day. Why not upgrade. 1080p video will be a little sharper, but in reality most people won't notice any real difference. It's likely that Apple will stop supporting the ATV 1st gen and 2nd gen in couple of years. Apple as a company usually only supports hardware 5-6yrs max! 

  • What is the difference between 1st and 2nd generation of the Itouch?

    Can someone tell me the difference between the 1st and 2nd generation of the itouch? I'm looking to upgrade from my nano to a 32gb Itouch.

    The speaker is a big plus. Who wants to dig up their headphones just to play a quick game of Lux Touch or play with your light sabre without anyone else hearing the sound effects :)? The lack of a volume control is also a major complaint of IPT 1G users. The only thing that should swing you back to the 1G is the iPod accessories you already have that may be rendered obsolete.

  • 1st and 2nd Receipt days of supply calcluation

    HI,
    i was wondering how the first and second receipt days of supply are calcuted when viewing in MD06. I went into the configuration 'Define Receipt Elements for Receipt Days' Supply' via menu Consumption Based Planning --> Evaluation --> Define Receip Elements Days' Supply.
    However, in this config activity i'm not sure how it differentiates between 1st and 2nd receipt days of supply? Does anyone know where the difference is located in configuration.
    Many Thanks, Erik

    Erik,
    The receipt days' supply indicates how many days a material will last. The system takes current plant stock and specific, predefined receipts into account when calculating the receipt days' supply.
    You can define two receipt days' supplies.This enables you to instruct the system to take the less binding receipt elements into account for the first receipt days' supply, and to take only the binding receipt elements (such as production orders and shipping notifications) into account for the second days' supply.
    In the IMG node you can define which mrp elements contributes or should be considered during calculation of days of supply.
    Typically for most clients, I advise taking firm MRP elements like Production orders & purchase orders into 1st Reciept days of supply as well as 2nd reciept days of supply.
    So in IMG node they get X =Take both receipt days' supply into account
    For Firmed PR & Firmed planned order they should be considered under 2nd reciept days of supply only.
    So in IMG node they get 2 = Only take receipt days' supply 2 into account
    Hope this clarifies your question around this concept. More questions please feel free to ask.
    thanks,
    Ram

  • I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    I currently have an iPhone 4s, ipad2 and 2nd gen iPod touch connected to a dock. Can I control the iPod using my phone or iPad if I have iTunes open on laptop?

    The Tango app might be of some help with that:
    http://www.tuaw.com/2010/11/08/tango-links-your-ios-devices-for-remote-music-con trol/

  • 1st Gen and 2nd Gen - help me?

    Ok so i'm confused here...
    The 1st gen and 2nd gen iPod touches both have the same 128mb of RAM yes...
    So why is it that the 1st gen is apparently incapable of running iOS 4?
    Yes, i understand that multi-tasking, and wallpapers(?) are too memory-intensive for the devices with such a small amount of RAM.
    But come on, surely something like folders isn't totally 100% impossible for the 1st gen??
    I know that the second gen is running @ 121Hz faster than the first but i would've thought that folders require the use of the memory over the processor?

    I make no judgements about whether these devices are iOS 4 capable or not. Nor do I offer an opinion about the policy of which devices do, and which do not, upgrade. Nevertheless, it is Apple's policy, and I unfortunately I don't think you're gonna get the answer you seek here... Sorry.
    You could try a Genius Bar or AppleCare, but only if you seek a Monty Python-style ‘Argument Clinic’...

  • Parts of the 1st and 2nd generation ipod nano's?

    I have a question. Does anyone know if the parts of the 1st and 2nd generation nanos are compatable with each other or are they different.

    no they dont work together

Maybe you are looking for

  • Temporary Table In SAP Query - Does not Work?

    DECLARE @date DATE DECLARE @delrows INT DECLARE @delquan INT DECLARE @a INT DECLARE @recrows INT DECLARE @recquan INT SET @a=0 IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab CREATE TABLE ##tab [Date] date, [Delivery Rows] varchar(40), [Del

  • JVM crash

    Hi, I run tomcat 5.1.15 as a service on Windows XP. When our Web application runs, tomcat crashes sometimes with this message in its crash log: "java.lang.OutOfMemoryError: requested -1662770648 bytes for Chunk::new. Out of swap space?" I have specif

  • Maintain Authorization Field in SAP ECC6.0

    Hello all, Our SAP system has upgraded from SAP 4.7 to ECC6.0 recently. After upgrade, I find that the function Maintain Authorization Field - SU20 cannot be launched. When I run the T-code SU20, the maintain authorization fields screen does not appe

  • Recurring document on transaction code F.14

    Hi All, I got problem with this user complaining on the recurring document when she try to execute on the above transaction code. At first she create few documents with success then when she try to do the next step, which is to create posting documen

  • Seperating signals

    Hi, i have a big problem with labview 7.1 I have a Data-Tanslation DT 300 A/D-Card, and i want to measure with 3 seperate channels. I have a VI where almost everything works, but i can´t find, where i can seperate the channels. The only icon i found