SKB1 table is not populated - Bulgaria country version
Hi,
Our team is working on installation country version for Bulgaria.
We have ECC 6.0 and SAPK-11023INCCEE ECC Core Country versions for EEM Country (Romania country localization).
We followed the instructions of SAP note 856949 "Enhancements for mySAP R/3 46C and
higher for Bulgaria" and we face the following problem:
Table SKB1 for BG01 company code is not populated, but we have data in SKA1, SKAT tables (charts of accounts CABG).
Although we imported CT_BG_160108.zip , CT_SKB1_table_content.zip , still SKB1 table does not contain data for BG01 - company code.
Please help us to solve this problem.
Moderator: I'd suggest to open OSS message on this problem, if you are sure that you maintain the data for company code
Hello,
Here are a few hints:
- In the operator, check the steps of your interface. Are rows inserted in I$ tables ?
- If you use Flow Control, does your E$ tables contains something ?
- Check the SQL code generated in the integration step, extract the Select from it and execute it using sqlplus, SQLDeveloper or whatever you want. Does it return something ? Maybe there is a wrong filter...
If you don't find the error, tell us which IKM you use and give us the generated code of the step which returns no data.
Hope it helps
Similar Messages
-
Finance Tables are not populating as expected
Hi Gurus,
Finance tables are not populating as expected when we ran vanila etl for obia 7.9.6.3 at the first instance.
For Example: Data is populated to w_ar_xact_f , w_ap_xact_f , w_gl_balance_fs , w_gl_account_d
but not other tables like w_ar_balance_f, w_ap_balance_f,w_gl_balance_f.
As per my finance team theThe natural account range in ebs is 0AA to Z00. I have given the values in file_group_acct_codes_ora file as fallows.
101,0AA,Z00,GEN PAYROLL
101,0AA,Z00,AP
101,0AA,Z00,AR
Please, Can anaybody help me if there is anything wrong in my configuration file 'file_group_acct_codes_ora'
Thanks in Advance,
gnsHi Ahsan,
Thanks for the reply.
I have re configured the file_group_acct_codes_ora.csv file based on the input from EBS financial team. When i ran the full load for FINANCE,PROCUREMENT,PROJECTS and HR the fact tables are not populating as expected.
For ex: SIL_ARTransactionFact_Diffmanload,SIL_APARTransactionFact_Diffmanload,SIL_GL_Revenufact_Diffmanload tasks are completed successfully.
But the SIL_ARTransactionFact_Full is failed with error ORA-08103 object no longer exists.SIL_APTransactionFact_Full ,SIL_GL_RevenueFact_Full tasks are failed with the error an index define on target table. Like this some of the sessions are failed with index define on target table. Before starting the full load i have reset the data sources to truncate the table as well. Would be great if i get some light on this issue.
for ex:I could see some data in the fallowing tables
w_gl_account_d
w_gl_group_account_d
w_ar_xact_f
w_ar_xact_fs
w_ap_xact_f
w_ap_xact_fs
w_ap_balance_f
w_ap_balance_f_tmp
w_gl_balance_fs
For ex: I can't see any data in the fallowing tables
w_ar_balance_f
w_ar_balance_f_tmp
w_gl_balance_f
w_payroll_f
w_payroll_fs
w_gl_cogs_fs
w_gl_cogs_f
Thanks in Advacne,
GNS. -
OBIEE Usage Tracking Table Is Not Populated
Hello everybody,
OBIEE Usage tracking table (s_nq_acct) is not populated correctly for last a few weeks. I have no experience on configuring / managing usage tracking jobs, so I do not know where to start to solve this problem. First of all, which log file should I go to find the problem? And also which parameters should I look? Can you help me please.
Regards,
DilekCheck that the absolutely correct and precise connection pool information contained in your RPD matches what your entries in the MBeans which then get written to the NQSConfig.ini.
Check that your UT physical model in the RPD physical layer isn't and old (11.1.1.5) setup running on a 11.1.1.7 env where the column definitions don't match.
Several log files. NQServer.log and NQQuery.log to begin with. -
Message table is not populating in CALL Transaction Method.....
Hi,
Im developing a BDC program for Tcode CV01N...Document link...Problem is when document link is created Successfully.then Message table is not getting populated with message....but this working fine when there is a error then it is population.
what could be the problem...let me know..
Thanks,
kiran.Hi,
Usually BDC replicates the standard transaction and captures all the messages that occur in the standard transaction.
I would request you to check the standard transaction, execute it and see if there is any message captured in success mode. If no message is capture, then your BDC functions correct.
If you still need do some processing based on the message table, you can do one thing:
IF gt_message (your message table) is initial.
> Do some processing/append your custom messagesince this is successful
Else.
--> Do error processing - since this is error record.
ENDIF.
Hope this helps
Regards
Shiva -
Hello everybody,
When we create a billing document, it is not populated table DBERCHZ2. Only table DBERCHZ1 is populated correctly but table DBERCHZ2 is always empty when we create a billing document. Due to this, we canu2019t find the meter reading document linked to this billing document.
There isnu2019t any OSS note that explains this problem.
Ideas? Similar issue?
Thanks in advance.
Fernando.Hello,
Just a suggestion that may help....
The problem may be with the selection screen you are using.
If you are using transaction SE16 and the field ATIM is active and the
from- and to- value is 00:00:00 ....delete the values here, that is, deselect the time fields.
Try this to see if the entries can be viewed..
Hope it helps.
Regards
Olivia -
Xla_transaction_entities table is not populating
Hello everyone,
There secondary ledger table xla_transaction_entities is not populating.
The table is used to feed another table for datawarehouse.
Could anyone explain why this is happening and give a solution please?
Thank you.
Edited by: Yuvraj Keenoo on Apr 13, 2012 11:47 AMPlease find the solution in the other open question(with same query)
-
Hello experts, in my IDM envt, when I submit request, REQ table never gets populated. All the requests can be seen in REQUEST table.
Is it an issue or that's how it is designed in 11.1.1 ?
can you please clarify ?
thanksthanks a lot.
Can you please tell me when the object tables get populated ? What I learnt is when we submit requests for resources (for example external LDAP), the object tables get populated.
appreciate your help.
thanks -
Hi Gurus,
Employee's medical deduction $200 suppose be deducted and stored in ARRRS or DDNTK tables. However that's not happening, it shows on remuneration statement as a payment. Please advice.
Thanks
Kamal.which version of OIM you are using?
-
ALV selection field of displayed table is not populated properly
Hi,
I am using OO ALV in my screen. I have two tabs. In one tab I display one ALV output in edit mode with selection option and passing internal table field for box_selection. In the other tab I am displaying another ALV output but in display mode.
My problem is when I switch from tab in edit mode to tab in display mode and back to tab in edit mode, then select a line on the tab in the edit mode, the method I am calling:
CALL METHOD grid1->get_selected_rows
IMPORTING
et_index_rows = i_sel_alvrows[].
would return table "i_sel_alvrows" empty.
If i do not switch between the tabs, the ->get_selected_rows logic works perfectly.
You reply will be greatly appreciated.
Thanks.Oleg,
I have doubt ,
This is example:--> if you have selected a line in edit tab and going to display tab and coming back to edit tab, at the point your selected line is there in edit tab as in selected mode ?
After freeing the container?
aRs
Message was edited by:
aRs -
Table is not refreshing with partialSubmit
I Have a commandbutton that populate a table:
<af:commandButton text="Procesar" id="cb1" shortDesc="procesar consulta" partialSubmit="true"
action="#{pageFlowScope.AptosRenovar.procesar}"/>
<af:table var="row" summary="Aptos por Renovar" rows="#{bindings.ListadoRenovaciones.rangeSize}"
emptyText="#{bindings.ListadoRenovaciones.viewable ? 'No se encontraron resultados para la búsqueda seleccionada.' : 'Acceso denegado.'}"
fetchSize="#{bindings.ListadoRenovaciones.rangeSize}"
rowBandingInterval="0" id="tafil"
value="#{bindings.ListadoRenovaciones.rangeSet}"
binding="#{pageFlowScope.AptosRenovar.tafil}"
rowSelection="none" styleClass="AFStretchWidth"
disableColumnReordering="true"
partialTriggers="::sfP:cbFirst ::sfP:cb2 ::sfP:it6 ::sfP:cb3 ::sfP:cb4 ::sfP:cb5 :cb1"
columnStretching="column:cApell">
In my java method I execute a procedure :
Map paramsRenov = new HashMap();
paramsRenov.put(Constants.CIASUC_PARAM,cia.concat(suc));
paramsRenov.put(Constants.ASECOD_PARAM,usuario.getCodigo());
paramsRenov.put(Constants.ANOMES_PARAM,nombre);
paramsRenov.put(Constants.TIPO_PARAM,renuev);
executeOperationBinding(EXECUTE_RENOVACIONES,paramsRenov);
When i clic on the button, the table is not populating. When i clic again the button,it does. I am using JDeveloper 11.1.2.1
Edited by: Miguel Angel on 09/04/2012 12:15 PMHi,
what is the business service you execute the operation on? Chances are that the iterator is refreshed before the new data is ready. Try setting the ADF iterator binding "Refresh" property to "ifNeeded" (this usually is what e.g. you will have to do for WebServices.
Frank -
ARP table not populating mac address for previously reachable IP address
Router has been online and working fine with one BGP neighbor for almost 2 years and no downtime. 2 weeks ago, added a 2nd BGP peer. Everything worked fine for 2 weeks, then all of a sudden yesterday the 2nd BGP peer is disconnected and does not come back. ISP checks and sees everything looks fine on their end. We cannot even ping each other now.
Upon investigation, the ARP table is not even populating the MAC address for the BGP peer IP anymore (same local subnet). Stays "incomplete" in the table no matter what we do, including clearing arp table, changing IP address, etc.
Plug a laptop directly into the 2nd BGP peer FE port and replicate the IP addressing. Laptop cannot ping Router, but Router CAN ping laptop. Check ARP table, but STILL no mac address assigned and now not even the ARP table showing "incomplete".
Thinking it could be the FE interface, switch to the 2nd FE interface and perform same laptop test, this time with arbitrary IP addressing. Now cannot ping each other, no MAC in ARP table.
End up rebooting the router and lo-and-behold, everything is working normally again. 2nd BGP peer peers up instantly.
I should also mention that the 1st BGP peer worked flawlessly throughout, taking all the Internet load and having no issues throughout.
Also, the FE ports for the 2nd BGP peer are on an HWIC FE card plugged into the router. The 1st BGP peer is plugged into the built-in GE interface. 2901 running: c2900-universalk9-mz.SPA.151-4.M4.bin
Lastly, no router resource issues, no error messages, no logs. Just the BGP peer disconnecting.
I have never, in 20 years working with Cisco routers seen something like this before. This is the most fundamental aspect of IP and Ethernet that was not working.
Has anyone ever seen this behavior before??
Here is the router config (IP's changed):
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
boot-start-marker
boot-end-marker
logging buffered 150000
aaa new-model
aaa authentication login LAUTHEN local
aaa authentication login TAUTHEN local group tacacs+ enable
aaa authorization console
aaa authorization exec LAUTHOR local if-authenticated
aaa authorization exec TAUTHOR local group tacacs+ if-authenticated
aaa session-id common
clock timezone PST -8 0
clock summer-time PDT recurring
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
multilink bundle-name authenticated
username ubiadmin privilege 15 secret 4 .JbeuWXuZvchrG0OL.5BftFtqrrEyxcnVHn5rIuCnTk
username umitsnoc01 privilege 15 secret 4 cUmoRUjey9O1x.wk9S.kleX.iAAhCwihupr6Z98p6OA
redundancy
ip ssh version 2
track 1 interface GigabitEthernet0/0 line-protocol
class-map match-any AutoQoS-VoIP-RTP-Trust
match access-group name SIP-Media-INBOUND
class-map match-any AutoQoS-VoIP-Control-Trust
match ip dscp cs3
match ip dscp af31
class-map match-any Customer-Voice
match access-group name Customer-VPNs
class-map match-any media
match access-group name SIP-Media
class-map match-any signaling
match access-group name SIP-Signaling
policy-map AutoQoS-Policy-Trust
class AutoQoS-VoIP-RTP-Trust
priority percent 70
class AutoQoS-VoIP-Control-Trust
bandwidth percent 5
class class-default
fair-queue
policy-map queue
class signaling
bandwidth percent 5
class media
priority percent 50
class Customer-Voice
priority percent 40
class class-default
fair-queue
policy-map shape
class class-default
shape average 10000000
service-policy queue
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description BGP Peer 1
ip address 2.2.2.2 255.255.255.252
no ip redirects
ip flow ingress
ip flow egress
duplex auto
speed auto
service-policy output shape
interface GigabitEthernet0/1
description LAN
ip address 1.2.3.4 255.255.255.0
no ip redirects
ip flow ingress
ip flow egress
standby 255 ip 1.2.3.1
standby 255 priority 105
standby 255 preempt
standby 255 mac-address 1a2b.3c4d.5e6f
standby 255 track 1 decrement 10
duplex auto
speed auto
service-policy output AutoQoS-Policy-Trust
interface FastEthernet0/0/0
description BGP Peer 2
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
duplex full
speed 100
service-policy output shape
interface FastEthernet0/0/1
no ip address
shutdown
duplex auto
speed auto
router bgp 7777
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.2.3.0 mask 255.255.255.0
neighbor 1.1.1.2 remote-as 5555
neighbor 1.1.1.2 update-source FastEthernet0/0/0
neighbor 1.1.1.2 prefix-list L3-DEFGW in
neighbor 1.1.1.2 route-map L3-LPREF-IN in
neighbor 2.2.2.1 remote-as 6666
neighbor 2.2.2.1 ebgp-multihop 2
neighbor 2.2.2.1 update-source GigabitEthernet0/0
neighbor 2.2.2.1 send-community
neighbor 2.2.2.1 prefix-list COLO-DEFGW in
neighbor 2.2.2.1 route-map COLO-LPREF-IN in
neighbor 2.2.2.1 route-map COLO-OUT out
ip forward-protocol nd
ip bgp-community new-format
ip as-path access-list 5 permit _5555_
ip as-path access-list 5 deny .*
ip as-path access-list 10 permit ^6666$
no ip http server
no ip http secure-server
ip flow-top-talkers
top 50
sort-by bytes
ip route 0.0.0.0 0.0.0.0 1.1.1.2 254 name L3
ip route 0.0.0.0 0.0.0.0 2.2.2.1 255 name COLO1
ip route 10.0.0.0 255.0.0.0 10.10.10.10 name FW_OUTSIDE
ip tacacs source-interface GigabitEthernet0/1
ip access-list standard SNMP_SOURCES
permit 12.12.12.0 0.0.0.255
deny any log
ip prefix-list L3-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-LPREF-OUT seq 5 permit 1.2.3.0/24
route-map COLO-LPREF-IN permit 5
match as-path 5
set local-preference 250
route-map COLO-LPREF-IN permit 10
set local-preference 150
route-map COLO-LPREF-IN permit 20
route-map COLO-OUT permit 10
match ip address prefix-list COLO-LPREF-OUT
set as-path prepend 7777 7777 7777
set community 29795:1004
route-map COLO-OUT permit 20
route-map L3-LPREF-IN permit 10
match as-path 10
set local-preference 200
route-map L3-LPREF-IN permit 20
set local-preference 150
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps envmon
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipslaWhen you were checking the ARP table was there an entry for Fast0/0/0?
HTH
Rick -
BSIS/BSAS tables not populated
Dear Experts,
I have a GL/account having too many items but FAGLL03 returns no items.
I have found that the reason is that tables BSIS and BSAS are not being populated with line items. however tables BKPF and BSEG in addition to FAGLFLEXA are all populated.
can you please assist why BSIS/BSAS are not populated thus FAGLL03 is not working? what is wrong with this GL account?
Thanks for your assistance.
SamirHmmm... Is it normal FI document or it's posted through some interface? If it's normal document and the following is right:
a) G/L account of the document is defined with 'line item' flag in this company code (SKB1 table)
b) the document exists in BSEG
c) BSEG-XKRES flag is 'X' on the line for this account
Then, if all mentioned above is correct, I'd open OSS note.
Regards,
Eli -
Seam (EJB3/JSF) App Deploys - but tables are not created, populated
Please let me know if you've run across this or have an inkling of an idea of what is going on here.
Description: I have created the JDBC Data Source and this deploys successfully. The JNDI Name for this data source is: "seam-jee5-ds".
I am using this JDNI name as the data source in my persistence.xml for the application. This data source is found when the application deploys. The data source itself is an embedded HSQLDB database, but I have also tried this with H2 and the result is the same.
The application works, I can open the page...but anytime there is a transaction with the database, the transaction fails. The error is that it can't find the table to query from, and fails w/ this exception:
javax.el.ELException: javax.ejb.EJBTransactionRolledbackException: EJB Exception: ; nested exception is: javax.persistence.PersistenceException: org.h
ibernate.exception.SQLGrammarException: could not execute query; nested exception is: javax.persistence.PersistenceException: org.hibernate.exception.
SQLGrammarException: could not execute query
+Caused by: java.sql.SQLException: Table not found in statement [select user0_.username as username2_, user0_.name as name2_, user0_.password as passwo+
+rd2_ from Customer user0_ where user0_.username=? and user0_.password=?]+
at org.hsqldb.jdbc.Util.throwError(Unknown Source)
The EJBs are recognized/discovered; example:
Aug 15, 2009 7:35:29 PM org.hibernate.cfg.annotations.EntityBinder bindTable
INFO: Bind entity org.jboss.seam.example.booking.Booking on table Booking
The persistence unit is configured:
Aug 15, 2009 7:35:29 PM org.hibernate.ejb.Ejb3Configuration configure
+INFO: Processing PersistenceUnitInfo [+
name: bookingDatabase
+...]+
Problem: When I then check the database (HSQLDB or H2), none of the tables that should be created and populated as a result of the EJBs are there.
The only two issues/warnings that I see are:
Aug 15, 2009 7:35:29 PM org.hibernate.impl.SessionFactoryObjectFactory addInstance
INFO: Not binding factory to JNDI, no JNDI name configured+
Aug 15, 2009 7:35:29 PM org.hibernate.util.NamingHelper getInitialContext+
INFO: JNDI InitialContext properties:{}+
Aug 15, 2009 7:35:32 PM com.sun.faces.config.ConfigureListener contextInitialized
INFO: Initializing Sun's JavaServer Faces implementation (1.2_03-b04-FCS) for context '/seam-jee5-booking'
Aug 15, 2009 7:35:34 PM org.jboss.seam.servlet.SeamListener contextInitialized
INFO: Welcome to Seam 2.1.2
Aug 15, 2009 7:35:34 PM org.jboss.seam.util.Resources getRealFile
WARNING: Unable to determine real path from servlet context for "/WEB-INF/classes" path does not exist.
Aug 15, 2009 7:35:34 PM org.jboss.seam.util.Resources getRealFile
WARNING: Unable to determine real path from servlet context for "/WEB-INF/dev" path does not exist.
Stack: JDK 1.6_011; WebLogic 10.3.1 (11g); Seam 2.1.2; Windows XP; HSQLDB 1.8
Any help you can provide would be much appreciated.
The app's persistence.xml:
<?xml version="1.0" encoding="UTF-8"?>
<persistence xmlns="http://java.sun.com/xml/ns/persistence"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/persistence http://java.sun.com/xml/ns/persistence/persistence_1_0.xsd"
version="1.0">
<persistence-unit name="bookingDatabase">
<provider>org.hibernate.ejb.HibernatePersistence</provider>
<jta-data-source>seam-jee5-ds</jta-data-source>
<properties>
<!--<property name="hibernate.dialect" value="org.hibernate.dialect.Oracle10gDialect"/>-->
<property name="hibernate.dialect" value="org.hibernate.dialect.HSQLDialect"/>
<property name="hibernate.transaction.manager_lookup_class"
value="org.hibernate.transaction.WeblogicTransactionManagerLookup"/>
</properties>
</persistence-unit>
</persistence>
Edited by: user447661 on Aug 17, 2009 9:41 AM
Edited by: user447661 on Aug 17, 2009 9:45 AM
Edited by: user447661 on Aug 17, 2009 9:47 AMNevermind, the issue was that my persistence.xml did not contain the following property:
<property name="hibernate.hbm2ddl.auto" value="create-drop"/>
Therefore, the tables were not being created upon deployment.
Still, I would expect to see entity beans listed in the WebLogic console. -
Field is not populating in BDC from Table Control value????
Hi Experts,
After adding a new Quantity (MY_QUANTITY) field to the existing Table control, I populated the data from SAP into it.
Now, the user will change (if he wants) its value, then he clicks the Push Button by expecting the posting of the Document i.e.in other words. the Control encounters the statement of MY_FORM_CREATE_ABAVN_VIA_BDC in my Prog.
But, MY_QUANTITY (changed, even not changed too) value/s is not passing in to my BDC_DATA table/code?
I am doing BDC for ABAVN transaction and wanting the Quantity filed of ''Partial Retirement'' tab to b populated in BDC. So, I am using as,
SAPLAMDP--Screen 100--Field as ANLA-MENGE (its a Subscreen/Tabs of SAP Screen)
So,
1) Problem is with my BDC code?
2) or, ''SAPLAMDP--Screen 100--Field as ANLA-MENGE'' is this wrong?
3) or else any other?
Message was edited by:
Sridhar
Message was edited by:
Sridhar
Message was edited by:
SridharHai sridhar,
The problem is within the BDC Code.
Because For the effect of adding the field there is no correspong change in bdc is done.So record one more time use the latest one(After adding the field)
Hope this helps you.
Regds,
Rama.Pammi -
BOM and Routing import is not populating data in base table.
BOM AND ROUTING INTERFACE Import Prog is not populating base table with interface data.Even the Interface table data is not processed.I am passing process flag as 1 and transaction_type as INSERT,still the ROUTING INTERFACE TABLES are not getting processed.
passing the below details.
INSERT INTO bom.bom_op_routings_interface
(organization_code, assembly_item_id, completion_subinventory, routing_sequence_id, organization_id,
routing_type, common_routing_sequence_id, last_update_date, last_updated_by, creation_date,
created_by, last_update_login, alternate_routing_designator, assembly_item_number, process_flag,
transaction_type) ;
INSERT INTO bom.bom_op_sequences_interface
(operation_seq_num, department_id, department_code, option_dependent_flag, operation_lead_time_percent,
implementation_date, effectivity_date, disable_date, count_point_type, backflush_flag, minimum_transfer_quantity,
operation_sequence_id, routing_sequence_id, organization_code, assembly_item_number, last_update_date,
last_updated_by, creation_date, created_by, include_in_rollup, alternate_routing_designator, process_flag,
transaction_type);
INSERT INTO bom.bom_op_resources_interface
(resource_seq_num, resource_code, resource_id, basis_type, usage_rate_or_amount, usage_rate_or_amount_inverse,
assigned_units, schedule_flag, resource_offset_percent, activity, standard_rate_flag, autocharge_type, organization_code, assembly_item_number,
operation_seq_num, effectivity_date, last_update_date, last_updated_by, creation_date, created_by, alternate_routing_designator,
operation_sequence_id, routing_sequence_id, process_flag, transaction_type);
Where am I making a mistake.
Thanks in Advance.
Sambit PradhanHi,
Try following
step 1. Insert routing header (bom_op_routings_interface) : Run Interface
step 2. Insert routing lines (bom_op_sequences_interface) with correct reference to routing_sequence_id: Run Interface
step 3. Insert all resource lines (bom_op_resources_interface) with correct reference to operation_sequence_id, routing_sequence_id , Run Interface.
Thanks,
Hrishi
Maybe you are looking for
-
How to create an Open HUB in BI 7.0 which will be scheduled by a Process ch
Hi Gurus, Could you please explan me how to create an open HUB which will e scheduleby a process chain? Thank you. BR Pat
-
Problem with Adobe After Effects CS6 on Windows 8.1 PRO
Hi Adobe Systems guys, I would like to know when the error will have the solution presented Adobe After Effects CS6 (Latinoamerican Spanish Version) running Windows 8.1 PRO, and throwing the following error. I've tried the latest available update 11.
-
Hi Experts, I am getting a dump when executing /SCMTMS/TEND_CONT_PROCESS (Process Frieght quotations and overde Freight RFQs). Runtime Errors UNCAUGHT_EXCEPTION Except. /BOBF/CX_FRW_FATAL ABAP Program /BOBF/CL_FRW=
-
I'm in big trouble ... I'm way behind in my project and I've got a very simple problem that is wrecking my head. Here's a simplified version of the problem ... import java.net.*; import java.io.*; public class CheckStream1 { private ObjectInputStream
-
Is it a problem if the fans are in "airplane mode" for a long time?
OK, have another quick question about my G5 Quad: Occasionally (like 2 or 3 times a year), my Quad fans will go into "airplane mode" - I don't know if it's from a failed boot or what (though a hard restart clears the problem), but my question is rega