Sketch Filter not working in smart filter mode?

I have been trying to use the sketch filter using Deke McClellans technique on turning type to fire, My CS5 Photoshop seems to work perfectly through applying the ripple effects but when I try to apply the Sketch Filter it is not available along with Artistic / Brush Stroke / Texture. I have checked all my settings and cannot find out why. Has this happened to anybody else?

Great Catch, I didn’t realize I was in the cymk mode ... I really appreciate the information, it is working perfectly now that I am in RBG. I didn’t realize it wouldn’t work in this format .. I take it doesn’t work in the 16 bit mode either? THANKS AGAIN, I was pulling my hair out, Dekes techniques are great and I wanted to complete the project for my wife's restaurant.
Regards,
Terry

Similar Messages

Airport express not working with smart bro

My apple express is not working with smart bro.
What to do????

I have the same issue. Mine fixed itself for a bit and now it's broken again. I'm thinking it's going to be intermittently broken. I've tried turning both devices off and on again but that did not help.

Thunderbolt to VGA Adapter not working with SMART board all of a sudden?

I was wondering if anyone had any suggestions on getting my classroom's (I'm student teaching) SMART board connected to my macbook pro (13 in). Two days ago I tested the setup I had, Mini-DVI to VGA adapter, Mac OS X SMART software suite and it worked flawlessly. Today I try the setup and although the SMART board recognizes my macbook via usb, the projector does not display anything. System preferences does not even recognize the projector as an external monitor. When I plug in my Mini-DVI to VGA adapter (already attached to the VGA cord from the SB) the screen flashes black and goes back to normal. Official work from SMART technologies is there is no supported adapters for connecting a macbook to a SB but I have seen numerous threads about this setup working and like I said it was previously working fine. Any suggestions on what to try next? I was thinking of dual booting to an older version of OS X. Thanks.
Specs:
MacBook Pro 13 in
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
10.9.1

If your laptop is not connected to power (i.e., plugged in to a wall), try plugging it in. It is not uncommon for a laptop to send the VGA signal out with less power when it is on battery power. I've seen this fix this problem, at least, dozens of times.
Try connecting the VGA cable to your adapter while the smart board display is on THEN plug the adapter in to your computer.
Also, try connecting the VGA+Adapter to your mac before booting it (or connect the macbook to the vga cable and then reboot the macbook). I've seen this work with macbooks using vga on projectors (or other external displays running through longer cables or crestron/extron/whatever switching equipment) many many times too.
If these fail, get your campus AV (or IT) people involved. We have often found that a damaged cable or long run needing amplification will work with some computers but not with others. It could be that the cable running from the smart board is somewhat sketchy.
Also, have you attempted to connect your macbook to any other display since starting to have the issue? A bad dongle (dp to vga adapter) isn't rare. I have a bad one sitting on my desk at this very moment.
One last thing you can try, this works for some:
Shut of the mac
Connect it to the smart board (i.e, connect the cables)
Turn on the mac and then close the lid
This *may* boot the computer on the external dispaly (smart board)
Open the lid before it comes to the login screen.
Hopefully one of these suggestions helps.

Image Buttons Not Working in IE10 Normal Mode

Hi Team,
Greetings of the Day!! We are supporting a project which included the technologies "ADF , BPEL , AIA , SOA".
We have a page developed in ADF and the page contains TABS.
We have a LOV which have 'Add Product' as one of the value.
When we click try to Configure the Line for a particular Product it is redirecting dmz-server where we have 'YES/NO' Buttons but this buttons are not working in IE-10 Normal mode and in other browsers buttons are working fine.
Could some one please help me on this.
Thanks

For that matter, the "return to menu" which is set to a Main button type, isn't working either. that is one of the three. After i had removed the damaged button and copied it from another it worked. Then i simply edited the text of a different button (mind you one that still works) and the "return to menu" quit along with the bottom 2 buttons. I just can't figure it out. I have shut the app down and restarted and nothing seems to be working

Attributes Not Working in Smart View

Hi All,
I have an ASO database that has attributes on the Cost Center dimension. In EPMA and in EAS, the attributes are correctly shown. When I pull data in Smart View for a specific cost center, I see data. When I apply the correct attribute, the data comes back as "N/A". I know for a fact that this cost center IS tagged as the attribute I am pulling, but it will not show in Smart View as belonging to that attribute. I am using version 11.1.2.3 and Smart View version 11.1.2.3.000 (Build 157).
Any thoughts?

Hello,
this is indeed strange. Not a real answer, but here are some suggestions to get more details:
Case sensitive?
What was the attribute of this cost center before?
Try a report on this cost center with all attributes. Does one work?
Try a different front end tool.
From EPMA do a full deploy (make sure you have saved you essbase objects to a save location)
Does it work?
Change the Attribute and deploy it again. Does it work?
If you found it, please update this here, so others will be able to find the solution.
Regards,
Philip Hulsebosch

Apply button not working In Sharepoint Integrated mode

Env:- SSRS 2008 R2 with Sharepoint 2010
For some report users, the Apply button is not working (SharePoint integrated mode).
After they select all the parameters in report and hit apply button , the page remain blanks and nothing happens.
This issue is experienced by certain user only.
When i checked the ULS log i found this during that duration
Process                                     Category
Category          EventID
ReportingServicesService.Exe Sharepoint Foundation      Database              4ohq
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.ReportingServices.SharePoint.ObjectModel.RSSPBaseCollection.get_Count()
at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetProperty(String propertyName)
at Microsoft.ReportingServices.SharePoint.Server.SharePointPropertyProvider.GetSystemUrl()
at Microsoft.ReportingServices.Library.GetSystemPropertiesAction.PerformActionNow()
at Microsoft.ReportingServices.Library.RSSoapAction`1.Execute()
at Microsoft.ReportingServices.WebServer.ReportingService2005Impl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingServiceSPImpl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010Impl.GetSystemProperties(Property[] Properties, Property[]& Values)
at Microsoft.ReportingServices.WebServer.ReportingService2010.GetSystemProperties(Property[] Properties, Property[]& Values)
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.Web.Services.Protocols.LogicalMethodInfo.Invoke(Object target, Object[] values)
at System.Web.Services.Protocols.WebServiceHandler.Invoke()
at System.Web.Services.Protocols.WebServiceHandler.CoreProcessRequest()
at System.Web.Services.Protocols.SyncSessionlessHandler.ProcessRequest(HttpContext context)
at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
at System.Web.HttpApplication.System.Web.IHttpAsyncHandler.BeginProcessRequest(HttpContext context, AsyncCallback cb, Object extraData)
at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequestNoDemand(HttpWorkerRequest wr)
at System.Web.HttpRuntime.ProcessRequest(HttpWorkerRequest wr)
at ReportingServicesHttpRuntime.RsHttpRuntime.ProcessRequest(IRsHttpPipeline rsHttpPipeline)
Can somebody please help on this.
Thanks,
Sandeep
~~ Mark it as Answer if you find it correct~~

Hi Sandeep,
Thanks for your feedback.
I haven’t find any documentation illustrate this limitation, it’s just my experience, I have a report which contains a muti-value parameter, it contains 500 value items and the length of each value is equal or greate than 10 characters, when I select
all parameter values, there is no response when I click the apply button, however, when I only select several items in it, the report showing fine, I could not sure your issue is the same with mine, it’s just my conclusion. If your issure is not related to
the length of the selected parameter, just occures to certain users even they selected with the same parameter values with the other users who run fine with this report, then this reply should not adapt to your scencario, it is so unbeliveable it is not working
only for certains users, I have not experience this issue before, and the information you provided is so limited that I could not address the root cause of your issue.
Thanks,
Bill Lu
Bill Lu
TechNet Community Support

Magic Mouse not working in 32 bit mode?

Hello,
I decided to boot my 64-bit 8 core Mac pro in 32 bit and the mouse (bluetooth apple magic mouse) was not working... The keyboard did work however.
Im not necessarily looking for a remedy to this problem as I don't really plan on using my system in 32 bit mode on a regular basis..... I was just wondering why it might be doing this..
Anyone have an idea?

Never mind... this is the MAC Pro section!
I must be really out of it this morning.... :/
Message was edited by: MACATTACK2010

Dual 30" ACDs not working correctly in mirror mode

My Apple Care guy is telling me that the problem I have is known and there is nothing they can do for me. I find this hard to believe, especially since it seems like I'm the only one complaining about this, so, before throwing in the towel and accepting defeat I ask, "Does anyone else have two 30 inch ACDs that do not work correctly while in mirror mode?". I have a Mac Pro4,1 eight core Intel Xeon with the ATI HD 4870. The details of my problem are in another post here (http://discussions.apple.com/thread.jspa?threadID=2659330&tstart=0).

Charlie Parker-
I do not represent the position of Apple, Inc. I am another User, like you.
After reviewing your Videos, I suggest that you may never be satisfied with the performance of two displays on one display card.
You are a very exacting and demanding user. You may want to consider having each display on its own card to maintain crispness and lack of transient artifacts.

Z3 Compact scenes not working in manual camera mode

Hi. That's my problem: when I use manual camera, the scn button is grey and not working, so the HDR. They worked when I bought the phone, at Christmas... No mod root etc. Please help me!
Solved!
Go to Solution.

http://support.sonymobile.com/global-en/xperiaz3compact/userguide/Using-still-camera-settings/
It has to be set on Manual mode at 8mp
HDR
Use the HDR (High Dynamic Range) setting to take a photo against strong back light or in conditions where the contrast is sharp. HDR compensates for the loss of detail and produces a picture that is representative of both dark and bright areas.
This setting is only available in Manual capturing mode.
ISO
You can reduce image blurring caused by dark conditions or moving subjects by increasing the ISO sensitivity.
Auto
Sets the ISO sensitivity automatically.
50
Sets the ISO sensitivity to 50.
100
Sets the ISO sensitivity to 100.
200
Sets the ISO sensitivity to 200.
400
Sets the ISO sensitivity to 400.
800
Sets the ISO sensitivity to 800.
1600
Sets the ISO sensitivity to 1600.
3200
Sets the ISO sensitivity to 3200.
This setting is only available in Manual capturing mode.
Metering
This function automatically determines a well-balanced exposure by measuring the amount of light striking the image you want to capture.
Centre
Measures the centre of the image, and determines the exposure based on the brightness of the subject there.
Spot
Adjusts the exposure in a very small part of the image that you want to capture.
Face
Measures the amount of light on the face, and adjusts the exposure so that the face is neither too dark or too bright.
Multi
Divides the image into multiple regions, and measures each region to determine a well-balanced exposure.
This setting is only available in Manual capturing mode.
Image stabiliser
When taking a photo, it can be difficult to hold the device steady. The stabiliser helps you by compensating for small movements of the hand.
This setting is only available in Manual capturing mode.
Preview
You can choose to preview photos or videos just after you shoot them.
Unlimited
The preview of the photo or video appears after you shoot it.
5 seconds
The preview of the photo or video apears for 5 seconds after you shoot it.
3 seconds
The preview of the photo or video appears for 3 seconds after you shoot it.
Edit
The photo or video opens for editing after you shoot it.
Off
The photo or video is saved after you shoot it, and no preview appears.
Face registrationYou can register faces with the Camera application so that the viewfinder automatically focuses on these faces when they appear in the viewfinder.
Flash
Use the flash to take photos when lighting conditions are poor or when there is a backlight. The following options are available when you tap the flash icon in the camera screen:
Auto
The camera automatically determines if the lighting conditions require the use of a flash.
Fill flash
Use this setting when the background is brighter than the subject. This removes unwanted dark shadows.
Red-eye reduction
Reduces the red colour of eyes when taking a photo.
Off
The flash is turned off. Sometimes photo quality can be better without the flash, even if lighting conditions are poor. Taking a good photo without using the flash requires a steady hand. Use the self-timer to avoid blurred photos.
Torch
A torch or camera light is turned on when you take photos.
Scene selection
Use the Scene selection feature to quickly set up the camera for common situations using pre-programmed scenes. The camera determines a number of settings for you to fit the selected scene, ensuring the best possible photo.
Off
The Scene selection feature is off and you can take photos manually.
Soft Skin
Take photos of faces using an enhanced beauty effect.
Soft snap
Use for shooting photos against a soft background.
Anti motion blur
Use for minimising camera shake when shooting a slightly dark scene.
Landscape
Use for landscape photos. The camera focuses on distant objects.
Backlight correction HDR
Use to improve details in high contrast shots. The built-in backlight correction analyses the image and automatically adjusts it to give you a perfectly lit shot.
Night portrait
Use for portrait photos taken at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Night scene
Use when taking photos at night or in poorly lit environments. Due to long exposure time, the camera must be held still or placed on a stable surface.
Hand-held twilight
Use for taking hand-held low-light photos with reduced noise and blur.
High sensitivity
Use for taking photos without a flash under low light conditions. Reduces blur.
Gourmet
Use for shooting food arrangements in bright colour.
Pet
Use for taking photos of your pet. Reduces blur and red eyes.
Beach
Use for taking photos of seaside or lakeside scenes.
Snow
Use in bright environments to avoid overexposed photos.
Party
Use for indoor photos in poorly lit environments. This scene picks up indoor background lighting or candlelight. Due to long exposure time, the camera must be held still or placed on a stable surface.
Sports
Use for photos of fast-moving objects. Short exposure time minimises motion blurring.
Document
Use for photos of text or drawings. Gives the photo increased, sharper contrast.
Fireworks
Use for taking photos of fireworks in all their splendour.
This setting is only available in Manual capturing mode.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

BDC on FK01 is not working in NO-SCREEN Mode

Hi gurus ,
i have a situation,
A custom interface (built as per requirement) is facing some issues with BDC when executing in "NO-SCREEN mode".
There was a requirement to include email adress while creating permitted payee vendors for corresponding Original vendors iN sap.
Now it used to create them . But after i retrieved the email details for a vendor and passsed in the BDC based on some condition, it doesnot work in "NO-SCREEN Mode" . For ALL Screen Mode it is working as expected ; when OK-CODES are given it asks with a pop-up which mode of communication reqd.
if email is selected then it assigns onto the new payee vendor being created. What's the problemwith NO-SCREN Mode?
could somebody plz guiide here.
Thanx
kylie

Hi Sandra ,
Thanks for your suggestion throiugh the link.
Had checked the trouble shooting for BDC : but the scenario in which i experienc eth eproblem is little different.
Well the Interface to create vendors was working perfectly in ALL Screen as well as NO-SCREEN mode.
But a small requirement seem to change its execution.
The Interface had a commented code snippet : retrieve email address from ADR6 table. Now according to the new requirement this code snippet needs to be utilized. So i uncommented that and duly passed th etable entries into the concerned screen (the code for that screen aldready exsits in the recording but not utilized since the retrieval was commented)
Collects the email address for any vendor from ADr6 table
Moderator message - Please respect the 2,500 character maximum when posting. Post only the relevant portions of code
now for linking the above created vendor, FK02 BDC is maintained. In this BDC the payment transaction screen is used to link payee vendors (above created vendor) at company code level for any principal vendors (selected from lfa1 and lfb1 table). So only two screens for linking .
this entire code was working perfect in both A mode and N mode but after including the ADR6 code snippet i dont find teh similar execution in N mode.
Could you please guide me where could i ahve made some mistake.
thanks
Kylie
Edited by: kylietisha on Jun 6, 2010 5:27 PM
Edited by: kylietisha on Jun 6, 2010 5:42 PM
Edited by: Rob Burbank on Jun 6, 2010 4:33 PM

Since I refreshed Firefox 36.0.4, "Save page as" and "save image as" are not working (even in Safe mode)

I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.

''afew2 [[#question-1054433|said]]''
<blockquote>
I refreshed FF 36.0.4 on invite. Since then "save page as " and "save image as" are not working -- no response when clicked.
In Safe Mode, same problem.
I serached past forum discussions and found several occurrences, but no convincing response.
</blockquote>
I tried troubleshooting plugins, none appeared to be causing the problem.
I installed 36.0.1, but no difference. Went back to 36.0.4, still no change.
I ran a malware check with Malwarebytes, no change.
A past thread here suggested deleting localstore.rdf, which I tried, no result.
People have had this problem in the past. No one has any idea of how to fix it?

PSE 11- FX and Graphics buttons not working under Expert Editor Mode

Under 'FX' in Expert Editor mode, the Filters, Styles and Effects tabs do not work, and similarly under "Graphics" the shapes and text tabs do not work. I have looked at C:\Programmes\Adobe\Photoshop Elements 11\Plug-Ins\Panels and find the 'Panels' folder is empty, which suggests this is a possible cause?? EDitor and Organiser are otherwise (at long last after Organiser faults rectified) now working fine. PSE 11 is running under Windows XP Service Pack 3. Any suggestions please ??

Thank you Jon; I see what you mean about creating an FX layer and by double clicking I can bring up the adjustments. Problem is when I go into Expert Editor mode, at the bottom right side of screen are five 'buttons' - Layers, Effects, Graphics, Favourites and More. When I click Layers, I get the Layers Pane up on right hand side and it works fine as I can create different layers etc, however when I press 'FX' I bring up a plain grey panel with three headings at the top of it; Filters, Styles and Effects - these do absolutely nothing, even if I am working on an FX layer and I am guessing something has gone missing or been corrupted.
The 'Graphics' button now works (I told it to search Windows>Graphics, which I read in another post)

IMAQ OverlayMnltiLines vi not work in fill color Mode on CVS1456 VGA

Hi,
I try to output colorful polygon on NI CVS 1456 VGA with IMAQ OverlayMultiLine vi Fill mode and it just output the frame of the polygon but not fill the color to the monitor. Try the OvelayRectanglewith Fill color, the vi works. Is there anyone know why? How to make the OverlayMultiLine vi's Fill mode work? Thanks!
John

Good afternoon John,
This information has been passed onto our R&D department. Earlier in the week, I tested out this problem and came across the exact same results. The OverlayMultiLine.VI works correclty in the "Fill" mode when run on the host computer. However, the "Fill" mode does not work properly when deployed to the CVS.
I apologize for this inconvenience!
Respectfully,
Jeffrey P.
LabVIEW Product Management
National Instruments

F10 Key not working in Web Browser mode

I created a click box on a CP5 screen and assigned F10 as the Shortcut key and the action is "Go to the next slide." When the user presses F10 the demo would advance to the next screen.
This works great in preview mode. However, when in Web Browser mode, nothing happens except I get this message at the bottom of the screen, "Contains commands for working with selected item."
How do I get the F10 key to work (action desired: advance to the next screen in my demo) in browser mode?

Hi there
LIkely it depends on the browser, but some keys are always reserved for use by the browser itself and they cannot be used as shortcut keys by a Captivate SWF because the browser will intercept them and not pass them on to the SWF.
I'm not sure if F10 is among those keys, but it may well be.
This would likely beg the question of why Captivate would allow you to assign a shortcut key if if wouldn't work when you publish and play in the browser. And for that I would remind you that SWF output is just one of the ouputs Captivate may produce. If you published as EXE, you aren't bound by browser behavior and the key would likely work just dandy.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

BDC - not working in 'No Display' mode

Hi Friends,
I have written a BDC for TCode O3URV_SS0.I have used CALL TRANSACTION for that.For capturing messages I have used application log.
In 'N' mode this BDC is not performing properly.For a new set of line item and a header data it should save that records and generate a document number.But in 'N' mode the BDC is working for 1st line item only.
This BDC is working fine in 'A' mode.
Please help me to solve this problem.

Moderator message - Welcome to SCN
But please search before asking - post locked
Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob

Sketch Filter not working in smart filter mode?

Similar Messages

Maybe you are looking for