Sky Go sound quality is poor

Sky Go sound quality is poor, hollow and reverb like, and happens with 'on demand', 'on now' and I assume also 'downloads'. Sky Go is a great concept and feature, but this sound issue significantly reduces your enjoyment and deters you from using it. Other broadcaster apps work fine for me, When will this Sky one be fixed?

just to clarify on Omicron's comment "Used Sky Go on my iPad 4 iOS 7  -  no sound problems; " - Do you actually mean no problems, but the sound quality is still poor? The point of this thread is to highlight the ongoing poor sound quality in Sky Go across all platforms, which many people on here suspect is due to overcompression. Could you confirm you are still having these issues, otherwise i am worried moderators may suspect the issue is fixed, which i can confirm from an episode of Blacklist on the train this morning is certainly not the case. Sound is still tinny, quiet and washed out on any downloaded porgram on iOS. Any news on if a fix for this is going to be in an update any time soon???  Omicron wrote:
Hi, Further to my earlier response I have now done the following: Used Sky Go on my iPad 4 iOS 7  -  no sound problems; Streamed a short film from You Tube using my PC - no problems; Installed the BBC iPlayer on my PC and streamed Atlantis - no problem. So I'm reasonably confident that: The sound card on my PC is behaving itself; There is no problem with the original recording on the BBC; There i no problm with the Sky recording on my iPad. One possible conclusion is that Internet Explorer 11 version 11.0.9600.16384, and Google Chrome Version 30.0.1599.101 m working under Windows 8.1 64 bit are not fully compatible with Sky Go. Bob   

Similar Messages

  • Improve/extend equalizer and add 3D sound. Sound quality really poor.

    I've been using the 2g nano for a while now and i must say the audio quality is really poor if compared with my 3 year old iRiver (which only has 256mb memory). Lots of people keep saying how great the sound quality is but i believe people saysing that just dont know any better. For those who do hear the difference the only satisfaction is the storage capacity.
    The Equalizer is a big shock. People (even Apple fans) say its best to leave it off for improvement. Why ? because turned on the music gets heavily distorted. People even blame their earbuds. So people go off and buy a €40 earbud just for that extra bit of improvement which the nano should already provide with the nano itself.
    So this is what should be done :
    - improve overall sound quality
    - add custom equalizer
    - add Xtreme 3D sound (= is a really big ++ iRiver users understand)

    iPod Feedback:
    http://www.apple.com/feedback/ipod.html

  • Headphone sound quality extremely poor, why?

    Had dust in the head phone socket, cleared this out and now the sound is extremely poor quality. Is the socket damaged beyond repair?

    I've tried that, and numerous headphones in the iphone. It's definitely the phone.
    Thanks anyway

  • HELP!  The Sound Quality is poor on my IPOD

    I just purchased an I POD 30G - Have downloaded songs directly from my CD collection... they sound great, except for those scratched CD's... My issue however is with other songs I had on my computer previously from other downloaded sites. Some play very loud and others play very soft and low... there is no consistency & its getting frustrating... I looked on this site for some help, but did not find anything concrete... is there a way to have all my songs on the IPOD play at the same sound quality/level? without having to go into each song & manually manipulate it? Please help....

    I tried this already based on some of my previous
    research... Once I clicked on it... it seemed to go
    through all my songs and re-adjust them... but it did
    not work...
    iTunes scans for volume automatically whenever you import songs, regardless of the 'Sound Check' setting. You also need to set 'Sound Check' on your iPod.

  • Sound quality is poor

    hi there,
    I have an ipod touch 4th generation which has started to sound 'tinniy' when I play any music from my itunes/music files.
    The gaurentee is up so no help from Apple. Has anyone else had this problem and any thoughts on how to fix it.
    I see that I could do a full re-set but I understand that you lose all the apps etc.
    help please.

    hi
    I always wondered if there was somewhere on the ipod where I could set my own EQ level. I reckoned that would sort it...so having looked around I have found it in Settings/Music/EQ/ and I 'think' I have resolved the issue.
    The 'tinny' sound seems to have gone..so we shall see what happens.
    Thanks for the option though. I might have to try this if my idea doesn't work.
    thanks.

  • Poor sound quality and distortion

    Ever since getting my 27" Imac I've notice the sound quality is poor and bass sounds distort quite a bit and it happens with the computer's speaker, headphones, and streamed audio over the network.
    Any ideas on what might be causing this? Sound card or itunes?
    Thanks,
    Terry

    Sounds like an audio circuit issue on your logic board--especially if it does it using headphones too. That almost eliminated the speakers. I would contact Apple and get it looked at.
    Dave M.
     MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

  • TS1718 Rental Video Sound Quality

    I have rented a video through iTunes and the sound quality is poor. Has anyone else had this problem? The sound crackles and the actors words are off time from the movement of their mouths.

    Hi amwils,
    Thanks for using Apple Support Communities.  You may want to report this issue to the iTunes Store:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/ht1933
    Cheers,
    - Ari

  • Poor sound quality in timeline and export; fine in Source?

    Hello all.
    Newbie to Pr but experienced pro in digital audio. I'm stumped and know I'm just missing something somewhere.
    I've made a music video for one of my songs. The graphics are all done (in AE), imported to Pr and eveything looks great. I import the final mix of the audio and it sounds very low quality when played from the timeline and in the final output, regardless of format (I've tried several presets and custom settings as well). I played around and noticed that the audio sounds fine when played from the Source window inside Premier.
    The Pr session is comrised of 18 video tracks (not all playing at once, of course) and one stereo audio track.
    I've tried re-exporting the audio from Logic at different bit depths, sample rates and file formats (mp3, wav, AAC, etc) but the results are the same every time: Source (Pr)sounds fine, Logic output sounds fine, rendered / timeline playback sounds like very low quality mp3 and final product sounds just as bad.
    I've tried everything I can think of. I hope one of you can show me what I'm missing.
    TIA!
    Mark
    Premier Pro CC
    Processor  2 x 2.8 GHz Quad-Core Intel Xeon
    Memory  8 GB 800 MHz DDR2 FB-DIMM
    Graphics  ATI Radeon HD 2600 XT 256 MB
    Software  OS X 10.9.1 (13B42)

    Thank you for the reply!
    I was experiencing the same results no matter what export settings I used. Plus the poor sound quality was present in the timeline itself, without even exporting the project.
    I finally threw my hands up, started a completely new project, drug the same audio file in... sounded fine. Copied / Pasted the video clips from the original, broken project and boom, eveything is fixed. Yeah, corrupted Pr file it turns out. All I had to do was start a new project and import all the old components.
    I've had to do this in Logic a lot (increasingly, these days). I just wish I'd tried it 10 hours earlier! Ha.
    Anyway, problem solved, and thanks very much!

  • The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The sound quality of my speaker suddenly got really poor when playing music or videos.  Sounds like an old AM radio or Sputnik.  Pretty sure it's hardware related but maybe not.  Thoughts on what the problem might be and if it can be repaired?

    The batterys the ipods come with are very sensetive somtimes they dont react right to the first couple of charges. Try fully charging it and then leaving it on until its completely drained a few times. If that doesnt work it might be a lemon.

  • Poor sound quality after update on iPhone4 to iOS6

    Any one with the same problem ?
    After upgrading to iOS 6 on my iPhone 4, the sound quality during phone calls is very poor.
    The other side is ok with listening.
    The phone is not modified (unlocked and oth....)
    Any advice is welcome !
    Thanks !

    Work in a professional studio and often use my itunes from my iphone 4gs to record sounds and samples. I have notice since the iso 6 update there is very poor quality sound coming from my phone now. It's seems the bit quality is very poor also the volume. I also noticed the songs are using way more power from the phone while playing.... Apple should really address these issues...a lot of  loyal costumers, such as myself use Apple products in the music industry everyday. We have grown to expect certain standards and quality from Apple products and it seems you are taking steps backwards not forwards.

  • Poor sound quality on airtunes and airport express

    I recently configured a new Airport Extreme base station and two airport expresses. I used the airport expresses to extend my network but the sound quality is very poor when I run itunes no my stero. can anyone tell me why and how to fix it. The sound is very scratchy and there is no volume.
    Rich

    Dear All,
    I'd like to follow up because I think that the answer to why I am getting poor sound quality my be in how I set up my wireless network. I'd like to get some feedback about this and some help about how to correct it.
    My wireless network has three components.
    1. "Base Station" which is a new Airport Extreme.
    2. Unit "Number 1" which is an Airport Express located in my living room and connected to my stereo. it is 30 feet away from the "Base Station."
    3. Unit "Number 2", also an Airport Express that is upstairs in a bedroom and connected to a ruby imac. via its ethernet port.
    Wireless strength is excellent in all locations and all other services are working well from a laptop, the ruby mac or the imac. My problem only seems readily apparent when playing itunes through the stereo's speakers.
    My wireless system is configured as follows:
    Base Station: Wireless mode is set to participate in wireless network and to allow this network to be extended. The WDS mode is main and is set to allow wireless clients. The two airport expresses are identified by ID number as remotes.
    Unit 1 and 2 are configured as WDS remotes and to allow wireless clients and identify the base station as WDS main.
    I recently configured a new Airport Extreme base
    station and two airport expresses. I used the
    airport expresses to extend my network but the sound
    quality is very poor when I run itunes no my stero.
    can anyone tell me why and how to fix it. The sound
    is very scratchy and there is no volume.
    Rich

  • Poor sound quality with NAD amplifier

    I have tried connecting my airport express to a NAD amplifier and using my ipod touch as a remote. The sound quality is very poor - too much bass. I am using quality cables from the 3.5 jack to phono input on the amp. Any suggestions.

    As Bob has eluded to, the key is NOT to use your system's PHONO jack for input from the AirPort Express. (ref: Using AirPort Express with the Phono jack on your stereo)

  • POOR SOUND QUALITY

    I HAVE HAD MY IPOD NANO FOR ABOUT 3 MONTHS. TODAY THE SOUND QUALITY IS REALLY POOR, CRACKLY. I HAVE TRIED DIFFERENT EARPHONES AND THAT IS NOT THE PROBLEM. I HAVE TRIED MY EARPHONES IN A DIFFERENT NANO AND THAT IS NOT THE PROBLEM. I HAVE RESTORED THE FACTORY SETTINGS ON THE NANO, ADDED A NEW SONG AND THE SOUND IS STILL THE SAME. I ADDED THREE SONGS YESTERDAY, COULD I HAVE PICKED UP SOME SORT OF VIRUS? HOW DO I RETURN MY IPOD TO APPLE FOR REPAIR IF THERE IS A PROBLEM? REGARDS JAYWOL.

    There is no need to make double post if there was way to help you then someone would of replied.
    Want to contract me? You can follow me on Twitter @RobGambino
    Be sure to click Like! for those who have helped you.
    Click Accept as Solution for posts that have solved your issue(s)!

  • Poor sound quality in IPhone 5 using a LifeProof waterproof case.

    I have an IPhone 5, using a LifeProof waterproof case.  Sound quality is very poor when in case, Lifeproof says to have Apple adjust the Foreground/Background settings - how can I do this?

    This is a common complaint. Get a different case.

  • Poor sound quality Through Airport Express

    Airport Express is connected to home stereo. sound quality is very poor?? I've tried it from both my computer & Ipad. Both are equally bad??? Music sounds normal on Computer & Ipad but terrible through the Airport express

    Music sounds normal on Computer & Ipad but terrible through the Airport express
    Temporarily, I suggest that you connect a pair of headphones directly to the AirPort Express. How does that sound?
    If things sound good, you know that the Express is functioning correctly and that you likely have have a problem in the connecting cable from the Express to your stereo equipment, as Koloss suggests.

Maybe you are looking for

  • Hide Logical Db Selection Filed

    Hi guys!! Is it possible to hide a selection field provided by the logical database? For instance: I use the LDB PSJ. In my ABAP code I have:                                     GET prps_r.                                     Get proj. When I run the

  • How do I make a change in a PDF document

    How do I make a change in a PDF document

  • I am not able to create database manually.unexpected error incountered why?

    I am not able to create database manually.unexpected error incountered why? Same step is worked in another system SQL> startup nomount ORACLE instance started. Total System Global Area 97589952 bytes Fixed Size 453312 bytes Variable Size 46137344 byt

  • How to debug ACE FT Sync Problems ?

    Hello, in one of our contexts we have a sync problem on the standby unit. "sh ft group detail" gives "Running cfg sync status : Error on Standby device when applying configuration file replicated from active", while "Startup cfg sync status" is OK. "

  • Designing notification for incoming messages

    Hi all; I work on a project where I have the task of finding a way to give the user a notification in the header part of the page, like for example number of new messages recieved. These messages are received asynchronously in the background using a