Skype 7.0 not respond in windows 8 64bit

My skype is working fine but when some time i switch to skype and wanna see messages, it will appear as not responding till i close the windows.
And when i watch the full screen movie, switch back to skype, it will occur same problem again.
Try most of the method in skype community but no permanent method.

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

Similar Messages

Adobe Reader Does Not Respond in Windows 8

I need to do a simple edit of a pdf. I've been editing pdfs using nothing but the free Adobe reader for years. Now I got a new laptop - 64 bit Windows 8 and I installed the current reader. I need the Adobe reader for other programs I work with. I have noticed that the adobe reader is slow to open and constantly says "not responding." I also cannot get it to respond so that I can fill in a form (i.e., a basic edit), which I could always do. Please tell me how to fix this!

I figured it out! I have Adobe Reader XI on my desktop. I opened it up. I went to Edit/Preferences/Security (Enhanced) and disabled the "Protected Mode at startup." My Adobe pdfs now respond and I can edit them without issue.
Date: Tue, 28 Jan 2014 10:28:26 -0800
From: [email protected]
To: [email protected]
Subject: Adobe Reader Does Not Respond in Windows 8
    Re: Adobe Reader Does Not Respond in Windows 8
    created by Rob McAfee in Adobe Reader Touch for Windows 8 - View the full discussion
Do you have Adobe Reader Touch for Windows 8? Or Adobe Reader XI for Windows desktop?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6061471#6061471
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6061471#6061471
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6061471#6061471. In the Actions box on the right, click the Stop Email Notifications link.
           Start a new discussion in Adobe Reader Touch for Windows 8 at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Ts-L633a DVD drive not compatible with Windows 7 64bit upgrade

Ts-L633a DVD drive on my Pavilion Dv7 1232nr is not compatible with Windows 7 64bit upgrade but will work fine if I downgrade back to Vista 64bit so what DVD drive is there other then the TS-L633a drive that I already have that is compatible with the Windows 7 64 upgrade so that I can buy and install on my laptop.

Here's one out of nowhere: do you have CD/DVD software that includes Sonic DLA or something like it? I've seen that take over drives and prevent normal operation.
If you right click on the drive and hit properties, are there any suspicious looking tabs?
Total WAG, and about 1% likely, but there you go.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Ipad 3 / Iphone 4S not recognized in Windows 7 64bits.

Hi, my Ipad 3 and my Iphone 4s are not detected by windows 7 64bits. They are detected via Itunes, and work properly, but i can't acces them directly via "computer".
There are no drivers installed, and i can't install them manually. I tried to uninstall / reinstall itunes, i also made sure Apple Mobile Device was working properly,
Any idea?

Google it

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit.

My HP LaserJet 3055 All In One does not scan using Windows 7 - 64bit. I can copy and print only. Thanks.
This question was solved.
View Solution.

Hi,
Is the printer connected to your PC by USB or network?
By using USB connection, you may scan using the Windows Fax and Scan software integrated into your OS.
Scanning through a network connection unfortunately supported on Windows7 32 bit only, as you may find listed within the About network scanning section below:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02539136#A2
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

AR 11.0.3 "not responding" w/ Windows redirected folders

I recently installed Acrobat Reader 11.0.3 on some Windows 7 Enterprise x64 hosts that are members of a Windows Active Directory domain. When a domain user logs on to any of these computers, a group policy object (GPO) redirects some of the user's "roaming" folders (their Desktop, Documents, Music, etc.) to a file server located on the network. (Note that the GPO only performs folder redirection. Windows' "roaming profiles" feature IS NOT configured or being used.)
:: PROBLEM ::
When a domain user logs on to any of these computers and launches Acrobat Reader 11.0.3 and opens a PDF document, the application almost immediately (within a few seconds) becomes completely unresponsive and MS Windows displays a "(Not responding)" message on the application window's title bar. (NOTE: The application does not crash until a document is opened. If the user launches Reader from the Windows "Start" menu, the app is stable until a document is opened.)
When I log on to any of these computers using a local (non-domain) user account, Acrobat Reader doesn't crash; I can use it normally for hours on end.
Other applications installed on these hosts run normally WRT accessing the domain users' redirected folders (located on the network file server), so it doesn't seem to be a network issue, or Windows configuration issue, etc.
I've tried "Help > Repair Adobe Reader Installation". I've tried uninstalling, deleting all residual folders and temp files, and reinstalling. I've pulled the hard drive and virus scanned it with a "known clean" system; no problems found.

You sound like my IT guy. The app only fails when you try to VIEW a PDF file. The error information is as follows:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AcroRd32.exe
Application Version:          11.0.4.63
Application Timestamp:          522888c1
Fault Module Name:          AcroRd32.exe
Fault Module Version:          11.0.4.63
Fault Module Timestamp:          522888c1
Exception Code:          40000015
Exception Offset:          000c7e20
OS Version:          6.1.7601.2.1.0.256.48
Locale ID:          1033
Additional Information 1:          c37e
Additional Information 2:          c37eace044c7ca1363ee7c4cfb11aae7
Additional Information 3:          946a
Additional Information 4:          946a74b2d618c7ad610e6e719f660649
We have tried to 'repair', uninstall a number of times the past two months... the only thing I can do is print each file. PLEASE HELP

Downloading Adobe Assistant Not Responding on Windows XP

Hello All,
I am trying to use Adobe Assistant to download Photoshop CS5 Extended trial on Windows XP but the program freezes everytime.
I have upgraded to Internet Explorer 8 and ugrades to Window XP Service Pack 3. I have uninstalled and reinstalled the
Adobe Download Assistant several times, and every time I attempt to download, the computer freezes. I have 2GB of RAM, and
a 250GB HD, Pentium 4 computer. I believe the computer is strong enough. What else should I do?

I end up restarting the computer after it freezes because it does not respond the to the task manager
to end the program. The Adobe Download Assistant asks the question about what type of user I am,
novice, intermediate, or advanced. After I select novice, a url appears at the top of the Adobe
Download Assistant window and then program freezes and does not respond to the
task manager to end program.
===============================================
Felicia Owens
[email protected]

Problems with IE8 "not responding" on windows 7

I have a Toshiba Satellite L-355 that has been upgraded to run Windows 7 Home Premium from Windows Vista. I've been having problems with IE8 "not responding" and have tried running it without add-ons, system restore, and banging my head against the wall. All to no avail. Does anybody have any ideas how to fix this? I've tried running other browsers with the same problems.

Intel(R) HM55 Express Chipset LPC Interface Controller
Thanks, sav! That's perfect. (Good to know it shows up in Device Manager for people, too.)
Okay ... although it's the Intel P55 and PM55 chipsets which get all the press about cranky Touch/iPhone connections on Windows 7 systems (the 0xE0000065, -6999 and "Disk can not be read or written to" error messages are the most common, although symptoms can vary further than that), similar sorts of issues look like they could strike other Intel 5-series chipsets ... including your HM55.
So I'm proceeding precisely as I would with someone with a PM55 chipset.
*1) Dell updates*
Some folks with 5-series chipset trouble have got past it by way of BIOS updates. So I thinks it's worth your heading to your Downloads page at Dell, and checking to see if there's any newer versions of your BIOS lurking there. Unfortunately, with the Studio 15s I'm never precisely sure which is the correct downloads page ... so I'd try going to the following Dell page:
http://support.dell.com/support/downloads/index.aspx
... enter your service tag, and then drill through to your downloads page.
Any improvement with your syncing performance after applying any available BIOS updates at Dell?
*(2) Adjust power management setting on USB controllers*
If no joy after updating (if you were behind on your BIOS version), try applying the measures from the following document:
[iPod not recognized when connected to Windows laptop over USB|iPod not recognized when connected to Windows laptop over USB]
Reboot the PC after making the changes, and then try another sync. Any improvement?
(If either set of measures improves your sync performance, please post back to let us know which one helped for you.)

Adobe XI slow or not responding on Windows 8 Pro

I am running Adobe XI on Windows 8 professional. Opening a document in XI it is either slow to respond or I receive a (not responding) message. This experience takes place on a regular basis since I have upgraded to XI. I am completely dissatisfied with the upgrade. Is there a way to go back to an earlier version?
http://www.pinterest.com/pin/create/extension/

To go back you would have to uninstall and then reinstall the old version. However, you might check to be sure you have updated AA XI before going further.

ITunes not responding in Windows 8.1

I cannot get iTunes to respond in Windows 8.1. I have uninstalled and reinstalled iTunes twice and I still cannot get the program to respond. I have the latest version, 11.2 (?)

Hello, tinamatt.
Thank you for visiting Apple Support Communities.
Here are a couple articles I would recommend going through when experiencing this issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/ts3074
Cheers,
Jason H.

Illustrator CC 64-bit release 2014.1.0 keeps freezing and "not responding" on windows 8.1

Every time I return focus to the app it freezes and the app says "not responding". It starts to work in about 10 seconds. Also, while I'm in the app it will do the same thing, especially it seems when I click in a panel. It seems to help if I go off-line so I'm thinking it is going online to check something perhaps?
Please help, Illustrator is practically unusable at this point.
Thanks,
Nigel

Nigel,
You may try this Extensions Suitcase 5 update:
http://www.extensis.com/support/product-support/suitcase-fusion-5/
Direct update link:
http://bin.extensis.com/SuitcaseFusion5-M-16-2-5.zip
It was suggested in a somewhat similar case recently, but is still untested.
Illustrator freezes upon sleep

ITunes Constantly "Not Responding" in Windows 8

Hi all,
iTunes has been giving me problems for the past while, constantly running incredibly slowing, and showing as "not responding" in my task manager.
PC is more then capable (processor, ram, etc, etc) of running it. I've tried the basic things, disabling other software, reinstalled iTunes, disabled firewalls, etc, but to no avail. I took a look through the forms and saw someone suggest copying a .dll file from common files to the iTunes folder, but that didn't yield any results either.
If anyone could point me in the right direction, or share any possible remedies for this situation, it would be much appreciated.
Thanks,
Tyler

The links the support team provided do not solve the problem. On my computer there is nothing else running except Bonjour! It's running from both the "Program Files" and "Program Files (x86)" folders.
I solved the problem by deleting Bonjour. I would have tried deleting just one or the other of the two instances (I figured they were conflicting with each other), but when I went to uninstall it there was only one option and they both got deleted during the uninstall.
Now itunes seems to work properly, it does give a notification that certain aspects of the program wont work and "you have to uninstall and re-install itunes" to get Bonjour back. But, I don't mind because I only use it for podcasts so none of the broken features bother me and the notification when I open the program is just a single click to get rid of. So, if you do mind not being able to connect your ipod or things like that then this may not be your solution. But deleting Bonjour works for me.

Application becomes Not Responding on windows

Hi ,
My application shows "Not Responding" mesage in the title and the status bar, when its doind a lot of database updates in background (SQLite database).
Also, the screen of the app kind of hangs or goes white.
Any thoughts as to how to avoid the screen going white or showing "Not Responding" message. I have a ticker loading gif displaying on the screen already, which is not shown since the screen kind of hangs.
Regards,
Brijesh

hey michelle i tracked down my device, you are fu****. THIS WOMAN STOLE MY DEVICE. I WILL ALERT THE POLICE AGAIN. DO NOT HELP HER SHES A THIEF. SHES IN COVINA OFF SAN JOSE ST. APT 7. I WILL GIVE THEM YOUR ADDRESS. I HAVE ALL OF YOUR HISTORY PRINTED OUT WITH LOCATION. U GOT A FEW HOURS TO TEXT ME WHERE TO GET MY DEVICE. I WILL HAVE THE COPS THERE ASAP. IT TOOK A WHILE BUT I GOT PROOF ITS MICHELLE CIANFROCCA. NOW WHEN AND WHERE DO I GET MY DEVICE. GO AHEAD AND TRY AND GET RID OF IT I ALREADY HAVE THE PROOF SO MAKE IT WORSE ON YOURSELF. LET ME KNOW ASAP. I HAVE EVERYTHING ABOUT YOUR EMAILS AND ALL THAT WAS DONE TO MY DEVICE INCLUDING WHERE YOUR ITUNES ACCOUNT WAS MADE. AND YOUR COMPUTER SERIAL NUMBER!!!! I KNEW U HAD IT. SEE U SOON OR U WILL SEE THE COPS AT YOUR FRONT DOOR. O YA AND I WILL TELL THEM ABOUT WHAT ELSE GOES ON THERE. THIS IS NOT A THREAT JUST DOCUMENTATION OF WHAT WAS TAKEN AND THAT YOU KNOW THERE IS NO GETTING OUT OF IT. I EVEN GOT ALL TEXT MESSAGES.WRITE ME BACK.

Hp officejet 6100 eprinter will not install on windows 7 64bit

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Broadcom 802.11n Network Adapter not working on Windows 7 64bit

As the title suggests, my laptop (Alienware m17x) is installed with the Broadcom 802.11n Network Adapter and Windows 7 64bit Home Premium. I have had several other driver incompatibility issues with Windows 7, but those I have slowly been able to resolve. This however just cropped up after two months of successful use. Yesterday it started failing to connect to the internet, telling me that no wireless connections are available. I live in a dorm, and everyone else on my floor has successful wireless, including my Ipod Touch, PS3 and XBox 360. I called Alienware/Dell Support and we spent hours trying to fix the problem and all look well until I rebooted my laptop this morning and the same issue reappeared. When I reboot my laptop, all I get is a notification that no networks appear in range. If I uninstall the broadcom chip and let windows install it after a boot up it works until the machine is rebooted a second time. I have tried over a dozen windows 7 drivers for the chip, and about half a dozen vista drivers and they all have the same results, works on the first boot, fails every time after that

Just registered to say, on an Alienware M17x system as well running Windows 7 Ultimate, here is a link to a solution that worked exactly for me:
http://forum.notebookreview.com/alienware/436486-guide-properly-solve-wireless-connection-problems-m17x.html
All I did was section I.a. If the link is down, I copied the only section that I needed to follow out of this guide, in order to get my wireless to work repeatedly without having to uninstall the wireless driver every single reboot. Now it works perfectly,
already connected to a wireless network on startup.
I.a. Disable Device sleep on disconnect
Some newer Nvidia Ethernet drivers have a feature called Device sleep on disconnect. This is the culprit. Normally, it should only put the Ethernet adapter to sleep when the cable is disconnected, but it's buggy and thus kills the wireless connection as
well.
Follow these steps to disable this feature on your Nvidia Ethernet Adapter:
1. Open the Windows Device Manager by hitting Win+Pause, then click on Device Manager on the left side.
2. Double-click on Network adapters.
3. Double-click on NVIDIA nForce Networking Controller (yes, that's the wired Ethernet adapter indeed).
4. Click on the Advanced tab.
5. Select Device sleep on disconnect.
6. Set the Value to Disabled.
7. Click OK and wireless should work again (might require a reboot afterwards, but probably not).

Skype 7.0 not respond in windows 8 64bit

Similar Messages

Maybe you are looking for