SL takes longer time to start up and shut down after "IceClean".

Greetings,
After "IceClean" (both maintenance and cleanup), SL seems (obviously) to take longer time to start up and shut down.
Any idea why and how can I resolve it?
Thank you so much.
Cheers.

Hi,
I've finally able to solve the problem. The problem was due to start up item. There were 2 trial application (expired long ago) in the folder. After clearing the application, start up and shut down are fast as light.
I think I've "awaken" the start up application after "IceClean" as IceClean has deleted their log file or something like that and therefore the applications have to run again.
In order to be fair to IceClean, it is my fault to be blamed.
Thanks again.
Cheers

Similar Messages

  • G4 MDD FW800 starts up and shuts down after several seconds

    Hi all,
    My G4 MDD FW800 DP.1,48 starts up and shuts down after about 20 seconds. I Have reset PMU and checked battery voltage, witch was OK. (also had it out for 30 minutes with no power connected etc.) I have video and also tried with NOTHING connected. But still it just powers down and failes to enter start up procedure.
    Last time I had it running I pulled my iPod, beacause the computer did't see it, the next thing I saw on screen was the message to hold the power button for 5 to restart, after that I got the problem described above.
    Anybody?
    Thanks,
    G4 MDD FW800 DP1,48 Mac OS X (10.4.2)

    Hi, I don't know how fast it shuts down, but...
    How to reset the SMU/PMU on a Power Mac earlier G3, G4, G5 models...
    http://support.apple.com/kb/HT1939
    Have you done a PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/ht1379
    In fact, do 3 in a row, takes a bit of time.
    Does it boot into Open  Firmware with CMD+Option+o+f ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)

  • Take a while to start up and shut down

    My MBP has been taking long to start up and shut down recently. I haven't put in any new softwares, been running regular updates. I tried fixing it with "Snow Leopard Cache Cleaner" and "Blackhole", but wouldn't speed up. Sometimes, applications shut down randomly. Please help.

    There is an issue I have noticed and I have been able to solve it for a good few people now, relating to slow boots and shutdowns.
    It is particularly obvious when on shutdown you see the spinner circle for a while.
    I had this issue myself and I fixed it using a simple terminal command.
    There are permissions on all the files on OS X, and there is a bug I believe when you do certain operations that screws up the group permissions on root (or / as it's known).
    An example of an operation that messes it up that I've come across is 'Deleting free space using disk utility' but I believe using certain apps such as ONYX can have this effect too.
    Basically the problem arises when OS X cannot create caches it needs to.
    You can tell if you need to run this command by looking at your console messages and if you see something like:
    'Kext can't create cache - owner not root' then you have the problem.
    The most interesting thing (as of 10.6.5 don't know if it's fixed in 10.6.6) is that 'Repairing Permissions' doesn't fix this issue EVEN THOUGH it is a permissions issue.
    The solution is simply to run this command:
    Open Terminal and run:
    sudo chown root:admin /
    even if you don't have the issue running it will not cause a problem so you can try it without worrying.
    Of course there could be something else that's causing your issue, but as niche as this issue may sound, nearly every person with a Mac that's experiencing slow boots & startups has had the issue fixed by this.
    Regards,
    John
    I have submitted a bug report regarding this FWIW.

  • Slow start up and shut down after Zenworks installation

    I hope someone can help me out on this one. Not sure if I am posting the
    right forum or not but here we go. After I installed Zenworks on our PC's
    here at work, we have a noticed a distinct difference in how long it takes
    for the PC's to start up and shut down. Before installation, everything
    was very quick, like it should be. Now it seems to take some users 3-5
    minutes to start and shut down their PC's. The machines are running
    several different OS'es. Windows 98SE, Windows XP Pro SP1 and Windows XP
    SP2. No one OS has more problems than the other. Has anyone heard of
    Zenworks causing this issue or heard of a way to prevent this? I would
    really appreciate any help you can provide.
    Thanks!
    Jami Benson

    On Thu, 20 Dec 2007 09:12:26 GMT, Rolf Lidvall wrote:
    > See this article by Shaun Pond:
    > "Using Search Policies Effectively in ZENworks"
    > http://www.novell.com/coolsolutions/feature/15294.html
    I would also suggest to get either some training or self study material or
    read the online documentation
    Marcus Breiden
    If you are asked to email me information please remove the - in my e-mail
    address.
    The content of this mail is my private and personal opinion.
    http://www.didas.de

  • FaceTime on macbook pro takes long time to start up and sometimes crashes

    My FaceTime on my macbook pro is taking a long time to start up. It just bounces for in the dock for a long time until it finally opens. its really annoying since t takes a while to open and then sometimes it shuts down unexpectedly in the middle of a call. How can i fix this??
    please and thank you!!

    You could try skype...

  • Starting up and shuts down after 30 seconds

    My powerbook started doing this. It's starting up, you hear the chime , then the spinning thing with the gray screen, then it shuts down after about 30 seconds.
    I did try a few things that I've read in different threads. I can do the single user mode and the black screen comes I can type the things from this thread but it doesn't look it works.. https://discussions.apple.com/thread/1801027?threadID=1801027 . I did type those commands w/wo the "+" signs.
    Please help

    The plus signs were remnant discussion formatting keys and are not part of the commands.
    OK, here goes on what to do.  Boot into single user mode.  Then try the following  command
    /sbin/mount   -uw   / <enter>
    which mounts the boot volume as write-enabled (it normally comes up read-only to begin with) then this command:
    /sbin/fsck   -fy   / <enter>
    And let it attempt the repair of the boot volume.  It will either report that the volume is OK or that it has been repaired.  If it has been repaired, then repeat the second command until it just says things are OK.  Please post the results.
    Note that usually, in single-user mode, those commands will appear as an advisory just before the first terminal prompt.

  • Mac book pro early 2011 takes a lot of time to start up and shut down.

    I have a mac book pro its early 2011 15" i updated it from snow leapord to lion since then i have been having a problem with the shutdown it takes a really long time. And i am now concerned because my mac took a lot of time to start up today it kept showing me the apple symbol for 3 min then it showed the login screen can u guys help me weather there is some issue with my mac or most of u are getting this problem. Should i install snow leapord  again or should i bear with the issue untill an update is there pls help im really worried..... Thank you.

    Shaikh
    You'll only be abe to repair permissions on the partition where your operating system is installed. For instance the disk on which I have Lion installed is name MacJoseph so that is the only disk I can repair permission on unless I boot from an install DVD. To do a clean install see these instructions. It's not difficult at all. This article may explain more about a clean install. To re-download the Lion installer open your App store application, at the top of the App store where it say's 'Purchased' hold down the option key while clicking on 'purchased.' This will open your purchases and allow you to download Lion. When the installer finishes downloading quit the installer and it will be in your applications folder. Hope this helps.
    Joseph

  • MBP takes long time to start up and applications freeze up

    This has been a problem for a while now and I tried deleting the harddrive and reinstalling all of my software but it didn't work.  Safari can work for a while but regularly freezes up so I have to force quit and reopen.  Some applications like Pages don't even open most of the time and the icon just continues to bounce endlessly.  I upgraded the software recently but it's still a problem.  Does anyone know what the issue might be?
    Thanks in advance.

    You could try skype...

  • How do I decrease the start up and shut down time?

    Processing pin wheel becoming more prevelant an time for start up and shut down is increasing.

    Start by using this utility that is already on your Mac:
    Using Activity Monitor to read System Memory and determine how much RAM is being used
    What Mac OS X are you using?
    How much Green in the pie chart? How much Blue?
    How many pageOuts since last startup?

  • When i turn it on it takes a long time to start up and it freezes in some of the apps so I had to turn it off

    Recently when I turn on my mac it takes a long time to start up and at first and in the beginning it appears with a grey screen and at the end it turns blue.
    Also it freezes in some of the Apps, so it make me to turn of.
    Please be kind enough to guide me to solve these problems.
    I thank you in advance for your cooperation and quick response.
    Best Regards
    Ahmad Emami

    What SP are you on?  We had a similar issue w/SP6 but it was resoloved with SP7.
    Michael

  • I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down. Please Help me!

    Hello!
    I have a MacBook Air. I have got a software update notification couple of days ago. I've clicked on it today, and it started installing updates.
    But, I have got a notification telling that not all updates were installed successfully, then I have clicked on "Restart" from the notification box. Then my Mac restarted and the white screen with Apple logo and the update progress appeared (like what always happens during updates).
    The problem that while the update progress reached around half the way, my Mac shutdown. I tried many times to turn it on, it turns and the same white screen appears and the update starts again and shuts down.
    Please Help me!
    MacBook Air (11-inch Mid 2009)

    Welcome to Apple Discussions
    You did not state whether you installed the update while on battery (not mains) power. You are warned not to apply certain updates without being connected to a charger & mains power.
    Also remove any attached peripherals.
    Reboot in Repair mode (command-R at start)  and use Disk Tools-Disk Utility-Disk First AId to repair your disk, and as long as you're there repair permissions. Next quit Disk Tools and reinstall the OS. After completing that successfully reboot, log in and do a combo update.
    You must have more than enough (not just enough) empty (free) disk space for the update.

  • Hi. There is a ghost search bar on my iMac screen which flashes constantly, even during start up and shut down. How can i make this go away? Please help. x

    Hi There is a ghost search bar on my iMac that flashes continually, even during start up and shut down. How can i make this go away? Please help. x

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load

    If I have more then a few tabs open such as gmail, facebook, and a zynga game no tabs will load at all. I close and reopen firefox numorous (Im talking 7 or 8 times or many more) and shut down the zynga game and still it wont load the tabs or if it does and I then try to add the game or any other site at all on a tab it causes firefox to stop working (though not close) and I have to restart opening and closing it many times to get it to work at all.

    1st, you will not be able to activate your PPro1.5 on ANY new computer, see next link for the special version you MUST use
    CS2 (and earlier) Activation Server http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l
    2nd, you already mentioned Virtual XP, so if a direct install doesn't work, that would be the way to go... or, to just do what SHOULD work from the start, just do Virtual XP

  • Start up and shut down is slow after erasing free space using disk utility?

    I went to Disk Utility, clicked Erase, and then "Erase Free Space." When I saw that it was going to take 1 hour and 30 minutes, I tried closing disk utility. It wouldn't let me exit, so instead I pressed "Skip." But when you hover over the "Skip" button it says, "Erase all data and reformat the disk."
    I'm wondering if the fact that I pressed the skip button has anything to do with my computer shutting down/starting up A LOT slower now. If so, what can I do to fix it?
    Thanks!

    Just wanted to give an update. I called Apple and apparently, you shouldn't empty the free space using disk utility while you're logged in. I had to insert the Installations CD and press the "C" button while my computer restarted, and used Disk Utility from there. My start up and shut down speed still isn't exactly the way it was before, but this definitely made a difference.
    Thank you to those who replied to my question!

  • Slow start up and shut down

    Dear mac users,
    I know this might be normal for every Mac or PC,
    my PB is 6 months old, and it's start up and shut down time is kind of slower than before, can anyone kindly tell me the reason about this please??
    Thanks^^

    Try using Disk Utility to repair your startup disk (hard drive) as shown in Dr.Smokes repair thread.
    Doing the things in his link is a good start for a monthly maintenance program.
    Do everything in the link and let us know.
    Cheers!
    DALE

Maybe you are looking for

  • Set a song as alarm?

    Is there something I'm missing in Clocks, but can you set a song in your library to play as your alarm on the iPhone?

  • I am getting different Names for one Shift_ID...

    Hi Gurus, I am new to Oracle report and trying to fix one bug.When I run a report with a particular Shift_ID , I am getting different Customer_Service_Representatives Name in the report. I checked the sources of each columns in the Layout. I have als

  • Drill that opens result in new window?

    Is it possible to change the default drill behavior for OBIEE? I need drill to open the result in a new window.

  • Use Flex4 layout or Away3D lib ?

    I saw the video about creating custom flex4 layout. But the view of the app is not very clear. Maybe the font can replace by embeded font to fix. The images is also not very clear. So how to solve this in flex ? And some 3d library can do better than

  • Problem with formulas

    hi      i am  using  BAPI_BANK_GETLIST  a predefined        bapi  ,  and the ouput port  is dragged to a chart           and   iam not able to provide the data series ,           its asking me to provide the formula  , and            iam trying to vi