SL500, Product recovery function has been removed from this sytem
I upgraded my SL500 from Vista to windows 7 OS several years ago and lately the OS has been acting weird (freezing, very slow at times) so I am thinking something is corrupted somewhere and want to restore it back to the manufacturers state. However, when I try to do this through rescue and recovery, it tells me that the recovery function has been removed from the system. I'm assuming that when I upgraded from Vista that R&R was no longer compatible so I installed version 4.5. My laptop did not come with backup OS disks and was told that this was the way to restore the system back to the factory state. How do I do this if I'm getting this message?
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62978
try this. If this don't work then you would to reinstall the OS using the T43 recovery media disk set.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Similar Messages
-
The Product Recovery function has been removed from this system
I get the following error when I try full system restore - "The Product Recovery function has been reomed from this system"?
How can I fix this?welcome to the forum:
Have you made a recovery media before this problem occured??? if you haven't you may need to call Lenovo and ask for a set of recovery disks, or just use your own XP/Vista OS you got from somewhere, and load it on your machine then enter you own serial number that come with your machine.
Then proceed to download the various softwares and drivers applicable to your machine, the most important that you won't have is the predesktop area, if you think this is unacceptable then call Lenovo and obtain recovery media from them (a nominal handling and service charge of around 50 USD will be charged).
http://www-307.ibm.com/pc/support/site.wss/product.do?doctypeind=9&template=%2Fproductselection%2Fla...
fill in the detail and download away. -
I had a server run out of disk space today. Digging in, the ccm mp_statusreceiver directory had 650,000 files in it, over 50GB in size. From what I understand, I think that folder is queuing up messages to go from a management point to the primary
server, but the server in question had it's management point removed a couple of weeks ago. It seems like it's still gathering data to send, but not sending it to the primary server, and filling up the drive.
If that's the case, then it seems the management point didn't actually get removed from the server, even though it's no longer listed in the config manager console as a management point. (The server still has a DP on it.)
How can I clean up whatever remnants of the MP are installed on this server?Hi,
Yes, you need a path for mp.msi. I saw that is located at C:\Program Files\Microsoft Configuration Manager\bin\X64.
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Recovery partition has been removed
Hi sir
I recently purchased a HP pavilion g-1202 TX series, I have installed Windows 7 64-bit OS, I found that I had only single drive i.e. C: for use, thought of creating another partition and shrunk the C drive, after this I found that HP RECOVERY MANAGER SAYS "Recovery partition has been removed - the recovery media creation option is no longer available"
Then again I tried expanding the C: drive back to its old stage, even then I found the same error, Now how can I get back HP RECOVERY.? and create Recovery Partition?if you havent created the recovery media already from your computer, there is only option to get media from HP.
contact HP to order Recovery media. in most countries you can order it online, else contact HP phone support.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07143
if no option to order media for your country, contact country HP support.
visit www.hp.com and select country from the left botttom. now select contact HP or connect with HP. reach support to get a set of recovery media to make your computer recover and work as factory install.
hope it helps. Good Luck !!!
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem*** -
"Recovery Partition has been Removed" Message in Recovery Media Creation
HP Pavilion G4 2205tx - C5j09PA#UUF
Windows 8 64-bit
"Recovery Partition has been Removed" Message in Recovery Media Creation.
i bought My new HP pavilion G4 laptop just two days ago and didnt change any thing in two Drives named Drive C: for windows and D: for HP Recovery.
now i want to Make a Recovery Disk with HP Recovery Manager Software.
but it show a Massage: "Recovery Partition has been Removed" in Recovery Media Creation Section.
in My Computer Recovery Partition is Almost Full (3.26G of 25.5G is Free) . so i think Recovery files present there .
i haven't any Access to HP for Buy recovery disk or Call Support.
Thanks
This question was solved.
View Solution.I don't know why your PC is saying your partition is gone - you're right, it doesn't look gone. I do know that if you use the Support Assistant to make backup copies of your Recovery Disks and Then instruct it to remove the recovery partition to give you more space on the hard drive, it will delete the HP factory image of Windows 8 from the recovery partition and leave the normal Windows repair tools behind.
There are tools however that allow you to create your own recovery partition complete with these Windows repair tools and a new image of your instalation so you can restore from that. You could use this tool: Windows 7/8 - OEM Recovery Partition Creator found here: http://forums.mydigitallife.info/threads/21978-Windows-7-8-OEM-Recovery-Partition-Creator but thats a lot of work and it would be faster and easier just to backup your data and restore from your HP recovery disks you made from Support Assistant. If you didn't make the disks, HP may opt to send you a copy.. they do not normally do this but I have read that some people have good luck getting a free copy of the media from HP.. otherwise they want you to buy the recovery disks ($40.00) . I suppose it depends on the exact circunstances of your situation.
Another solution is to use Macrium Reflect Free Edition to ghost or clone your system. You can then restore your whole system even with your custom programs installed, to the exact state it was in when you made the backup image. ( this may take several dvd's) I suggest you go this route because restoring your system with Macrium Reflect is Much faster than restoring from the HP Recovery Disks. Even if you do obtain another copy of the Recovery Disks, you should use this tool to make another backup that you can customize to your liking. Your re-installs will be faster, they will already have your chosen software installed, and you will save wear and tear on your HP Recovery Disks. You can then safely delete the recovery partition to gain back that space on your hard drive (since you cannot access it anyway, you won't need that space being taken up). BUT.. you cannot restore from UEFI Mode which is what HP ships with. You have to go into your Bios settings, and switch to Legacy Bios mode, (which disables Secure Boot) FIRST or else the Macruim recovery boot disk will not load to install the recovery image. After the system re-installs you can go back into bios settings and disable Legacy bios and re-enable secure Boot if you like. ( Windows 8 will load in both UEFI mode with secure boot enabled or Legacy bios mode.. it's your choice. UEFI mode will load faster but it will cause problems if you want to dual boot the system with another OS) Hope this helps. -
Recovery drive has been removed
hi
i have a pavilion dv6 - 2140se
my recovery partition has been removed
i want buy and download it
please help meHere are the specs for your HP Pavilion dv6-2140se Entertainment Notebook Computer. Sorry, but HP can't and/or doesn't make Recovery images available for download. Please contact HP, in your region / country, via the HP Worldwide Support Portal to check on the availability of HP Recovery Discs for your computer.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Goods receipt when PO creator has been removed from org structure ?
Hello in my organisational structure PPOMA_BBP, i have 2 users, X and Y.
X has created a PO in the SRM portal.However , X has been removed from the org. structure.
Is it possible for Y to make the goods recept( that is , Y logs in the portal and makes the goods receipt) ?Hi
Did you try to delete the user ? Did you get any error message?
Note 1148837 - SRM user cannot be deleted
When trying to delete an SRM user the system will check if there are still
related SRM documents in the system. If there are active documents in the
system the deletion is not possible. This is the correct system behaviour.
But even if all related SRM documents are archived the deletion is
sometimes not possible, because there are residual entries in table
CRMD_PARTNER linked to this user.
More Terms
User crmd_partner residual entries deletion active document
Cause and Prerequisites
Solution
The attached report PARTNER_SET_DELETE will display in simulation mode all
residual entries in table crmd_partner with invalid item or header links
and in non simulation mode it will delete the corresponding crmd_partner
entries.
Header Data
Release Status: Released for Customer
Released on: 10.03.2008 11:54:37
Priority: Correction with low priority
Category: Help for error analysis
Main Component SRM-EBP-PD Procurement Document Methods
Additional Components:
SRM-EBP-ADM-USR SRM User Administration
Valid Releases
Software Component Release From
Release
To Release and Following
SRM_SERVER 500 500 500
SRM_SERVER 550 550 550
Support Packages
Support Packages Release Package Name
SRM_SERVER 500 SAPKIBKS14
SRM_SERVER 550 SAPKIBKT12
Correction Instructions
Ref note 550071 too..
regards
Muthu -
When I back up my I phone 5s or my ipad2 camera roll, contacts and documents does this save in the cloud all to view even if a photo has been removed from camera roll?
iCloud- Photo Stream FAQ
iCloud- Photo Stream limits
iCloud- How to delete photos from Photo Stream
iCloud- Photo Stream troubleshooting
iCloud- Using and troubleshooting Shared Photo Streams
iPhoto '11- Add, remove, and edit photos in a shared photo stream
iPhoto '11- Create a shared photo stream
There are obviously limits to what can be stored in Photo Stream and for how long.
If she wants backups then she will need something like this: Seagate Wireless Plus. -
Hi. the email application has been removed from my ipad. I don't have back up so how can I get it back?
It is not possible to remove the Mail app (or any other of the bundled apps) from the iPad. It's probably been moved to another Home screen or inadvertently placed in a folder. If you can't find it, you can reset the Home screens in the General -> Reset preferences.
Regards. -
HT203254 Why Mac Book Pro 17 Inch has been removed from the Apple Stores?
while surfing the Apple web site, I found that Mac Book Pro 17 Inches has been removed from all the
stores......is there any fault or some thing wrong has been detected in it?I heard a rumor that the 17" machines are all wearing cement shoes and at the bottom of the East River. Some guy named Soprano tipped me off.
We aren't supposed to talk about it. -
Hi, the App Store icon has been removed from my iPad even after synching and updating. Any suggestions on how to get it back to be able to update / purchase apps?
If you do not have, or remember, the passcode for Restrictions, the only option available to you is to reset the device to factory settings via itunes.
-
Recovery partion has been removed...help!!!
i have a a pavilion dv6090 laptop and i noticed that its recovery partion has been removed.i dont know how it hapend the only thing that i know is that i havent removed it myself.can anybody tell me me how to fix this problem??
Hi,
I've replied on your earlier thread on the link below.
http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/recovery-partion-has-been-removed/m-p/75...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hi,
I am trying to create a new sub site. Everytime I try to create the site I get this error:
the file you are attempting to save or retrieved has been blocked from this web site by server administrator
This applies to almost all site templates except the "blank site" template. I am logged in as System Administrator.Issue resolved!
Don't know how but somehow, xml was added to the Blocked file types. Removing the entry did the trick. -
Hi
I have just updated my iPhoto to Photos in OS X and i have noticed that the option to edit photo with external editor such as Photoshop has been removed. will this be back!
Its now a pain to send a photo directly to my favourite photo editing software.
RossThanks Terence
Totally understand being a new app and not an update.
So i'm a ammeter photographer and i like the way i can view my photos in iPhoto and i'm happy with the new App for this also, however i like to edit my photos in PS from time to time and i shoot in raw. As i can no longer select edit in external editor from the photo app i tired to drag a RAW photo to PS but this didn't work. i then tried dragging to desktop but this then made a jpeg so i loose my raw advantage. I would like to be able to find my original raw photos easily so i can edit them in PS.
Hope that makes sense?
Ross -
How to show a row has been "removed" from a table
We maintain rows in a table with a version number which will determine the current set of accounts for a version. I need to be able to show the changes between the versions - when a row was ADDED, REMOVED or there was NO CHANGE. I can work out ADDED and NO_CHANGE without any problem, but I'm not sure how I can determine that a row has been REMOVED when it no longer exists in the next version.
I have provided an example piece of SQL below:
with w_acct1 as
(select 'A1' acct, 0 vers from dual
union all
select 'A2' acct, 0 vers from dual
union all
select 'A3' acct, 0 vers from dual
union all
select 'A1' acct, 1 vers from dual
union all
select 'A2' acct, 1 vers from dual
union all
select 'A1' acct, 2 vers from dual
union all
select 'A4' acct, 2 vers from dual)
select a.*,
nvl(lead(acct) over (partition by acct order by vers desc),'NULL') ld,
case when lead(acct) over (partition by acct order by vers desc) is null then
'ADDED'
when lead(acct) over (partition by acct order by vers desc) = acct then
'NO_CHANGE'
else
'REMOVED'
end add_remove
from w_acct1 a
order by vers,acctWhich gives me the following result:
ACCT VERS LD ADD_REMOVE
A1 0 NULL NEW
A2 0 NULL NEW
A3 0 NULL NEW
A1 1 A1 NO_CHANGE
A2 1 A2 NO_CHANGE
A1 2 A1 NO_CHANGE
A4 2 NULL NEW
The result I want is:
ACCT VERS LD ADD_REMOVE
A1 0 NULL NEW
A2 0 NULL NEW
A3 0 NULL NEW
A1 1 A1 NO_CHANGE
A2 1 A2 NO_CHANGE
A3 1 NULL REMOVED
A1 2 A1 NO_CHANGE
A2 2 NULL REMOVED
A4 2 NULL NEW
Note the REMOVED rows associated with the version even though they don't exist in the dataset for that version number.
Can this be done with analytic functions or some other cool Oracle feature I'm missing?
Regards
RichardYou can't know about a row being removed unless you have a record of that row somewhere, either as a copy of your old data (see example below) or you've recorded the information using delete triggers etc.
SQL> ed
Wrote file afiedt.buf
1 with old_data as (select 1 as id, 'A' as dta from dual union all
2 select 2, 'B' from dual union all
3 select 3, 'C' from dual)
4 ,new_data as (select 1 as id, 'A' as dta from dual union all
5 select 3, 'X' from dual union all
6 select 4, 'Y' from dual)
7 --
8 ,ins_upd as (select * from new_data minus select * from old_data)
9 ,del_upd as (select * from old_data minus select * from new_data)
10 ,upd as (select id from ins_upd intersect select id from del_upd)
11 ,ins as (select id from ins_upd minus select id from upd)
12 ,del as (select id from del_upd minus select id from upd)
13 --
14 select 'Inserted' as action, null as old_id, null as old_dta, new_data.id as new_id, new_data.dta as new_dta
15 from new_data join ins on (ins.id = new_data.id)
16 union all
17 select 'Updated', old_data.id, old_data.dta, new_data.id, new_data.dta
18 from old_data join new_data on (old_data.id = new_data.id)
19 join upd on (upd.id = new_data.id)
20 union all
21 select 'Deleted', old_data.id as old_id, old_data.dta as old_dta, null as new_id, null as new_dta
22 from old_data join del on (del.id = old_data.id)
23 union all
24 select 'No Change' as action, new_data.id as old_id, new_data.dta as old_dta, new_data.id as new_id, new_data.dta as new_dta
25 from new_data where id not in (select id from ins_upd union all
26* select id from del_upd)
SQL> /
ACTION OLD_ID O NEW_ID N
Inserted 4 Y
Updated 3 C 3 X
Deleted 2 B
No Change 1 A 1 A
SQL>
Maybe you are looking for
-
All of a sudden I get this error, 406 Not Acceptable An appropriate representation of the requested resource /postersschool.html could not be found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocume
-
How to process data in the past based from data in the present
hello guys, i have a problem in my labview programs. how to process data in the past based from data in the present ? i have a formula self-organizing maps this formula is looking for D1, D1 is neuron index that will be searched for the smallest valu
-
Hi am trying to create a linked list out of an object i have called ClassID. I have a Link class (that creates a node correct?): import java.io.*; public class Link public ClassID id; public Link next; public Link(ClassID inID)
-
Mov to avi program, sound video import sync problem CS4, creating wide screen
I am using Premiere Pro CS4. I have edited for years on and off, most often I am on set. I just need to set this up right to work. I have mov footage, and used Pazera to convert it to avi. It does not look right. Here are my convert questions. 1. is
-
Error Message : "Importer detected a generic error" Please Help.
My problem is most likely very simple, with the research I've done I've concluded it is one of 2 options(probably): 1. The project settings are wrong - I've tried quite a few within NTSC(where I should be) but the same error occurs. I am using videos