SLD: Adjust / Add logical system name for Business System [XI 3.0]

Hi,
In the <b>System Landscape Directory</b>, is it possible to adjust the logical system name of an already created business system?
I found in the content maintenance in Subset="All Classes", Class=SAP_BCClient" --> <MY_BUSINESSSYSTEM_ENTRY> the only possibility to add information on the logical system name of a business system.
Unfortunately, the information provided in the BCClient Entry is not forwarded to the Business System Entry for my Business System in the Business Landscape View of the SLD...
Is there another possibility to add the logical system name to an exisiting business system?
Regards
Kristian

In a third party business system, it is not possible to add a logical system, but you can delete the business system and recreate it with the same name without problems.
After assigning a new logical system to a business system, you have to go to the integration directory and reload the logical system for the business system. Therefore open the Business System in change mode and maintain the Logical System with menu service -> Adapterspecific Identifiers.
Regards
Stefan

Similar Messages

  • Logical Sys Name for Business system in SLD for Third Party

    Hi !!
    I have little doubt what will be the logical system name for creating Business systems in SLD for third party?
    thanks
    Gowri

    Hi Gowri,
    sorry, i dont agree with the other answers. The logical system name is required for ALE partner finding. If you dont want to communicate with IDocs you dont need it. If you want to send messages from third party system to R/3 via IDoc adapter, then you should (can) give a name. It can be configured in IB directory as well (adapter specific identifiers). Choose any name, this name will be used for the partner agreement in R/3.
    Regards,
    Udo

  • Assign Logical file name for the physical file path through Program

    Hi all,
    I am having a physical file which is getting generated dynamically. It is having the date and time stamp in its name which is added at runtime.
    Now I need to assign a logical file name for the physical file path through the program.
    Is there any FM or any other method to assign the same.
    Gaurav

    I think it is not possible. becuase the date & time added at runtime. so if you check the table  PATH you can find filename and their definitions
    a®

  • How to Add the title name for Graph in Excel

    Dear Friends
                      I am using LabVIEW 8.0.I need how to add the title name for chart in Excel.
    Jayavel
    Solved!
    Go to Solution.

    Do you have the Report Generation Toolkit? If so, the Excel Easy Graph VI has an input for that.
    If you don't have the toolkit then you will need to use ActiveX. Please do a search on how to use ActiveX (there are examples that ship with LabVIEW) to control Excel. There are also lots of example in the Excel thread. NOTE: DO NOT POST QUESTIONS IN THAT THREAD. 
    Ultimately you will need to look up the information in MSDN. 

  • Logical File names for OHS

    Hi all,
    I wanted to create the files names dynamically
    I know we can use transaction file and define a logical name with variables and assign value sto the variables to get the physical name.
    my requirement is to fetch different values for the variables as well. for example : let ssay I have to create two data files using a process chain . both should have same time stamp at the end of the file.
    I 'm planning to store this timestamp in a table. so during run time I want FILEname1_timestamp and Filename2_timestamp.
    wher etimestamp is the same value for both files. but the prefix is different.
    please let me know a optimum way to create this in BI7.0

    I store this as a variable in PARAMVALUE table and us ethis in the logical file name of the File in transaction FILE.

  • Default Subpackage Names for Business Components (11g); Bug?

    Does anyone know how to enable the ability to specify the default packages under Tools -> Default Project Properties ->Business Components -> Packages?
    Mine are all greyed out.
    Also, even when I have the bare minimum of an ADF model project, before even checking "Initialize Project for Business Components", the defalt packages are greyed out.
    Further, once I do check "Initialize Project for Business Components", the section for Default Subpackage Names is complete gone.
    I want to be able to specifiy the subpackages, so that when I regenerate entities etc. from tables the components go to the right packages.
    Thanks for any help.

    This seems like a bug to me. If you select Initialize Project for Business Components, everything is enabled. And stays that way even after you open a different application.
    But , You can set these values under Tools - Preferences - Business Components - Packages. This works nicely. Once you set these, create a new application and things will be fine. If you have existing application, it may require some xml file (.jpr) manipulation. That seems to be a nicer approach. I don't know what is the purpose of Default Project Properties, when you can set everything by Tools - Preferences.

  • Logical System Name Not appearing in the Business System

    Hi,
    Initially we had created a Technical system with Client 700 without a "Logical System Name" in SLD. hence the 'logical system name' in 'business system' was also Blank.
    Now, since we are implementing the IDOC to file scenario; we need to maintain the "Logical System Name" in the client and which in turn should reflect in our Business System in SLD.
    Though we maintained the Logical System Name in the Technical System --> Client --> Logical System Name; we are unable to see the same(Logical System Name) in Business System ('Integration' tab)
    Please also note that Business System is of the ROLE: Integration server.
    When we go to business system in SLD ---Integrtaion tab ---Logical System Name -- is still blank.
    Can anyone please help us to update the 'Logical system name' in Business System in SLD?
    Regards,
    Rehan

    Hi Sunil,
    I followed your link till
    Bussiness System -> select your bussiness System -> in Below pane u will find Details of your bussiness system ->amongs the various tabs available select Integration Tab->U will See option for technical system beside that u will see option for change ->click this ->u will be taken to Logical system ->there u define u r logical syatem name and then save the entries.
    When I clicked the option chnage ---> "Change Associated Technical System" appeared, It didn't take me to Logical system.
    But in turn I clicked hyperlink corresponding to Technical systems, it took me to technical system --> clients tab --I have entered the Logical system name.
    When I go back to Business system again its not showing the Logical system name in Integration tab.
    regards,
    rehan

  • SLD Logical System Name Changes not taking effect in IDOC

    All -
    I've had to change a logical system name in the SLD, everything appears to be okay but new Idocs are still posting with the old LS name - any suggestions as to where to look for the old name would be most appreciated.
    Thanks!

    Hi Dennis,
    After changing the logical system name in SLD have you done "Compare with  SLD" from Service --> "Adapter-Specific Identifiers" for Business system in Integration Directory?
    - Pinkle

  • How to change logical system name

    hi,
    there is no logical system name for business system in sld on integration tab.
    this bus sys is based on tech sys which is configured as integration server.
    plz tell me how to give the logical sys name there.
    plz reply me it is urgent.
    vijender

    Jochen Gugel wrote:
    > Hi @ll;
    >
    > at the tab in technical system the logical system name was correct.
    > But it wasn´t shown at the integration tab of the business system.
    > I solved this problem by deselecting the integration server, save this settings and reselect it afterwards.
    >
    > Kind regards
    > Jochen
    hello all,
    I'm actually having the same issue.  This issue is NOT the popular adapter-specific identifier problem where the business system in the ID needs to be compared with the SLD.  This issue is that the within the SLD on PI 7.0 the Logical System Name of a given business system is not present although the logical system name of the specified technical system does appear.  You cannot change the LSN of the business system since it relies completely on the LSN of the associated technical system.
    I used Jochen's approach before and it worked, but i've tried this again since i'm having the same issue.  Only now it doesn't work.
      i solved this issue by deleting the old BS and recreating it
    Thanks,
    Edited by: Jason Ray on Jun 24, 2008 5:47 PM

  • Logical System not appearing in SLD

    Hello Friends,
    Logical System of SAP R/3 system is not appearing in SLD. The logical system is available in backend ABAP System. I have even run the RZ70 data collection programs as well. However, I am not able to populate the logical system names in SLD.
    I have put the same logical system names in the client tab of the technical system but in vain. The logical system field is non-editable and I believe it is always non-editable unless some technical system is not assigned to it.
    The logical system name is also not available in ID (if it is not in SLD then it won't be in ID as well).
    [The SLDCHECK is throwing exception 4. what to do for this? May be the data is not transfered because of this? Even though I have maintained proper password in SLDAPICUST!!!]
    Request your kind adivse on what can be done. Where can I lookout for possible errors.
    Thanks & Regards,
    Anand Patil

    Hi
    On SLD - > Technical System -> Client -> Logical System Name , generally It is Editable entity .
    If in Your Case , You can not change it, chech with ut basis Guy , for roles and authorisation against your Username ,
    Check the Same SLD Roles with some PI Service  User.
    Regards
    Prabhat Sharma.

  • Logical system name in the message

    Hi,
    I am sending a file from non SAP system to XI, which is than converted to Idocs and goes to a SAP system. Sender File system is created in SLD and a logical system name is assigned to it. My requirement is to know that logical system name during mapping. Can anybody guide me to find this in the incoming message.
    Thanks !

    Dehra,
    Am not sure if this will help, but if you want, you can get the details like Sender Business System , sender Service etc in your mapping.
    If this is what you want , take a look at this link,
    http://help.sap.com/saphelp_nw04/helpdata/en/b3/9a2aeb24dc4ab6b1855c99157529e4/content.htm
    Also, can you please elaborate on why you need to access this Logical Name from mapping? Just curious..!!
    Regards,
    Bhavesh

  • Changing Default logical system names of a model.

    Hi
        How could i change the
         Default logical system name for model instances:
         Default logical syatem name for RFC metadata:
        values for existing model? without recreating the model.
         Thanx

    Hi shah kond,
    you can change  rfc destinations of model in 2 differnet ways.
    firs one: right clcik on project
              from the context menu select propeties
              it will open a dialogbox from that select dynpro references then click on jco references tab
    by using add and remove buttons u can add and remove joc destnations
    2.expand ur model class double click output class.now seelct properties view.there u can change the jco destination
    hope this will use ful for u
    Regards
    Naidu

  • Unable to convert the sender service to an ALE logical system

    Hello,
    file adapter > XI 3.0 > Idoc adapter > r/3 system
    In sxmb_moni I receive "Unable to convert the sender service to an ALE logical system".
    In we05 in r/3 system no Idocs are arrving. I have no problem with idoc > XI >  idoc scenario to this same r/3 system (using same sld business system)
    I read other topics on this error but it seems they all talk about an IDOC outbound interface.
    What should I check?
    Thanks
    Boaz

    I do have the same problem as Boaz Paz
    When I try :
    file adapter > XI 3.0 > Idoc adapter > r/3 system
    > This is a B2B scenario where "AVTItalia" is the external party trying to send via its "AwayOrders" business service (a file pickup) an idoc to business system "UPG" (non party service)
    I get an error while XI tries to call its IDoc Adapter:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIAdapter</SAP:Category>
    <SAP:Code area="IDOC_ADAPTER">ATTRIBUTE_INV_SND_SERV</SAP:Code>
    <SAP:P1>AwayOrders</SAP:P1>
    <SAP:P2 />
    <SAP:P3 />
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Unable to convert sender service AwayOrders to an ALE logical system</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    With the following trace logs :
    <Trace level="1" type="T">Party normalization: sender</Trace>
    <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
    <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
    <Trace level="1" type="T">Sender party external = AVTItalie</Trace>
    <Trace level="1" type="T">Sender party normalized = AVTItalie</Trace>
    I ve tried to (cf. /people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc ):
    1. add a logical system name "ACYAVTFBC1" in "Adapter specifier Id" of "AwayOrders"
    In the runtime cache > services an entry appears for " ... Logical System | AVTItalia | ACYAVTFBC1...".
    2. declare "AVTItalia" as a business partner in SLD with the logical system name
    Plz help!

  • Logical system creation in BD54

    hey guys
    i have a very silly question,i m really confusing myself.
    well i m doing a IDOC to File scenario.
    on the R/3 side i have RFC dest(SM59) and Port(we21) in place,both pointing to the XI system.Port is SAPXD1(XD1 is system ID of the XI system).
    i m confused in BD54 and WE20.
    i go in BD54 to create a logical system with the name XD1CLNT100(XD1 is the system ID of the XI system and 100 is the client)
    then i go in WE20 and create a partner profile,with the same name as Logical system(XD1CLNT100),then in the outbound side i enter the IDOC i m gonna send and give the Port name as SAPXD1.
    lemme know if the above steps are right?
    now my stupid question is,when we create a logical system in BD54,is that the logical system for R/3 or for XI?
    is this the same logical system name which i have to use in SLD to create a business system for the sender service?
    i have gone through lots of blog and links and m really confused.
    please dont send any links.
    appreciate ur help
    thanx
    ahmad

    Ahmad,
    Get in touch with the Basis Team. They should be able to give you the Logical System name of your R3 system . Normally it always is , SID"CLNT"ClientNumber.
    You will only create on Business System and this will be the One for the R3 system using the R3's logcial system name.
    When the Idoc is sent from R3, it will search in the SLD with its logical system name to find what the correspionding Bsuiness System is. After it finds the Business System it will fill the SOAP header with details like Sender Service and Sender Interface and Sender NameSpace and with these values deterkine the receiver.
    As you are doing a file to Idoc, the receiver can be a thrid party business system or a business service.
    The Receiever System is also a WebASABAP business system in case you are doing an Idoc to Idoc and that is a different case altogether
    Regards
    Bhavesh

  • BS- Adapter Specific Identifies - Logical System: value is missing

    Hi,
    I've created a simple scenario in which idoc is being received in ECC (by idoc receiver). my communication channel (i.e., soapSender) is part of my INTEGRATION_SERVER business system. i checked, for the relevant business system the Adapter Specific Identifies -> Logical System values and it was missing. therefore, i had to update the correlated technical system definition (at SLD) and updated required value (i.e., logical system). somehow the value is still missing when i re-check the business system (at Integration Builder).
    i took the following actions:
    1. delete and re-import BS from SLD.
    2. re-start xI
    and nothing was changed.
    What can be done?
    Regards,
    Uri

    Hi Uri,
    >Indeed, the LS was not exits
    I do not 100% understand your statement. Plz check AGAIN (in SLD) if the logical system name is still there.
    My suspect was that a ABAP job (you can look to it in RZ70) is overwriting the technical system.
    Regards,
    Udo

Maybe you are looking for