SLED not updated in LX27 though changed in MSC2N

Hi Gurus,
When the SLED was changed in MSC2N, the change is not reflecting in LX27. Could you please throw some light on why is it so?
Thanks in advance
Shashidhar

Hi Shashidhar,
check if for your  Warehouse number you had activated the SLED check in the warehouse management.
(V_T340DG-MHDKZ)                                                                               
Please also review the note: 394605 for more information.
Regards,
Mauro

Similar Messages

  • Shared Variable does not update when typedef is changed

    I have a shared variable of type custom control (typedef made up of a cluster). When I chang the typedef, e.g. the name or type of one of the fields in the cluster, and then save it, the shared variable does not update to reflect this change. That is, if I place the shared variable on my block diagram and do a "UNBUNDLE BY NAME" on the output, I see the old fields. I have to go back to the properties of the shared variable, change its data type, apply it, then go back and change it back to my custom control.
    Anyone else seen this behaviour? Anyone know how to get the shared variable to update without going through this procedure?
    Bill
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

    I guess I should have included this information:
    LabVIEW 8.2.1 using Project Explorer.
    “A child of five could understand this. Send someone to fetch a child of five.”
    ― Groucho Marx

  • Actual end date is not update after closing a change

    Hi,
    We are using SCSM 2012, now I want to make report on which changes have been closed in the last month. In som way all the changes that have been closed in SCSM do not have an actual end date, all the changes that I have imported from our old tool does. It
    looks like SCSM does not update this field by itself, but I can't find a field in the change managment module in which I can provide the actual end date.
    How does SCSM 2012 copes with this?
    Kind regards, Marco Jansen

    Hi Greg,
    We are actually testing this now, as MS is not planning to solve this issue on a short term. The use of the last modified date is casuing u a lot of trouble now as we have had an change on our change form casuingthe last modified for all change to be set
    to the date of the change. That was the end of my closing data.
    We are now getting the WA in place from Netviaconsulting, but that is not a complete solution. Not all change reach a state of complete before they are closed. Sometime you will close a change that is cancelled ,rejected or failed. this means that when
    triggering on an update of the record every update will set the actual enddate. Besides when setting the actual enddate on the status closed, the date is update every time the worflow runs.
    We just want the actual enddate to be filled  when a change comes to the status closed from any other status, but this sets the actual enddate on every status change of the change. in some strange way ewe cannot figure this out.
    If anybody has the correct configuration for this workflow it would be very useful. Most prefereably MicroSoft in this case.

  • Shaped layers are not updating in ae after changing them in Photoshop

    I created a photoshop CS3 file that has a grid and 3 layers with editable shapes (a graph that has to be changed daily). When importing them into AE CS3 as a comp cropped layers, After Effects sees the layers and layer masks correctly. The problem is when we go back into photoshop and only change the points on the shape layers, save the file, and open the saved After Effects file, the shaped layers are not updated. Even the reload footage does no avail .
    Steps to reproduce issue
    1. Create a layer in photoshop and make a shape
    2. Save the photoshop file.
    3. Import the Photoshop file in After Effects as a comp
    4. Save the After Effects Project
    5. Reopen the photoshop file and edit points on the shape layer.
    6. Save the Photoshop file
    7. Open the After Effects project.
    8. The SHAPE layer WILL NOT UPDATE. The mask is still the same as the original first saved file.

    No, they don't. Andrew is correct. Once imported, shape paths from PSDs will become masks and those have no relation to any external reference items. They are AE-internal. The apparent question is, how complex your graphs are. If you check out one of my old tutorials on creativeCOW you can find a line chart rigged with expressions and thus fully editable from within AE. Similar projects can be created for other chart types and in fact I had several of them already on my website (and will provide them again, if and when I get around to finally updating it). Also do not forget that you could use plugins such as Digital Anarchy's Data Animator (now owned by Red Giant and being reworked into an updated version called Datamator)...
    Mylenium

  • Classification Data (SLED) not Updated for Movement Type 561

    Dear All,
    I have noticed that after uploading the opening stock with movement type 561, the Classification data (Date of manufacture & Shelf Life expiry date) which was captured in MB1C is not updated in the batch master in Classification Tab.
    Is this standard SAP behaviour for 561 movement type? Or is there any config is missing?
    Please advise.
    Regards,
    Suresh.

    Hi Suresh,
    For your question I understand that while uploading the initial balances, system didn't ask you for the Manufacturing date or total shelf life date. Following is the solution:
    You have to maintain "Check SLExpir.date" and "Classif.batches" indicators for the movement type 561 or any movement type you required. This customization can be perform through SPRO>>MM>>IM>>Goods Mvt. and mvt. No.
    Also activate SLED at plant level in customization.
    Regards
    SAK

  • Dropdown list not updating when bound db changes

    I hope someone can help me.  I have a form created by Livecycle Designer ES.  It contains a dropdown list populated by a bound to a database table. All works well until the database table is altered.  The dropdown list does not reflect the change.  It is as if the values were snapshotted when the was saved in Livecycle.  I have been unable to find a way to make the list update. 
    Details:
    LiveCycle Designer ES version 8.2.1 - part of Adobe Acrobat Pro 9 with the latest updates.
    The table is contained in a SQL Server 2008 R2 database. 
    The data connection: OLEDB Database,
    Provider: Microsoft OLE DB Provider for ODBC Drivers
    Connection: UFN
    What am I doing wrong?
    -Rhinoplasty2012

    Hi Paul,
    Thanks for helping. I'm using Acrobat to view the PDF form. Thus, shouldn't have any problem connecting to the database.
    I've captured some screenshots as below and hope it helps you understand my situation better.
    This is my Access database
    This is my PDF. Added a data connection "Product" using SQL Query "SELECT ProductCode, ProductName FROM PUB_Product WHERE ActiveInd=yes" whereby it will only extract the "active" products.
    Binded the product code dropdown list with "Product" data connection to populate the list.
    The output of the PDF form. Only the active products are being listed.
    Now, if let's say I add a new product to my PUB_Product table, the dynamic form will straight away list the new product but not the static form.
    Dynamic form
    Static form
    In order to see the new product listed in the static form dropdown list, I have to re-open the form in Live Cycle and just simply save it. So my question is, is there anything I can do to skip this "open and save" step?
    Thanks.
    Regards,
    Steven

  • Operations Manager not updating IP phone location changes

    We have Cisco Unified Operations Manager and we noticed that for some time  IP Phone location changes were not registered and updated.
    There are couple of phones in All IP Phones/Lines list which are listed as still connected to old switches, while actually moved to completely new switch on different location .
    Also - in   Devices>Device Management>Inventory Collection>IP Phone       IP Phone Collection Status is always :  "Discovery in progress..."   with  Last Collection Start Time   and  Last Collection End Time  from couple of months ago...
    We have discovered two old bugs CSCsw26833 and CSCsv33965, but Restart PIFServer, pdterm PIFServer followed by pdexec SRSTServer and checking of netstat connection  did not change anything...
    What could be a problem, how can we start IP Phone collection?

    Hey George, thanks for the reply!
    Yes, you are absolutely correct. If I set Device Mobility Mode from Default to Off, the phone re-registers and the correct time for that time zone is displayed...!
    Awesome, thanks again George. Much appreciated!
    Thanks Again,
    Matt

  • Word Links not updating when row number changes in excel

    Hi,
    I have a huge excel file with employee name,code,dob etc as fields.I linked it to word documents using paste special and macros.Everything works fine and word also updates with changes in excel file, but problem arises when in excel , data is added in the
    middle rather than at the end of the file. This changes the row numbers of all the employees.Hence when I  open corresponding word document, some one else's details open. So now i have to edit links in word...office->prepare->edit links, Here i
    have an option called ITEM IN FILES... this is where the problem occurs...It requires mentioning the row no of the corresponding pasted link...but when i change data in excel and row no changes...this should be automatically detected by Word and row number
    should be updated there.Please help me find a way to resolve this.This is what it looks like....
     Data for VC!R1C2:R2C13
    I want R1 and R2 to change automatically if I change rows in excel file.
    Thank you

    Instead of specifying a cell range in the LINK field, name the range in Excel, then use the range name in the LINK field.
    For example, instead of:
    VC!R1C2:R2C13
    you might have:
    VC!MyRange
    in Word.
    That way, the LINK will point to the named range, regardless of how many rows and/or columns are added/deleted before it. Furthermore, if you expand or contract the range (e.g. by adding/deleting columns between the first & last column), the
    named range and, hence the linked range, will likewise expand/contract.
    Cheers
    Paul Edstein
    [MS MVP - Word]

  • The Appcache file is not updated even if I change the version. any changes concerning version 34.0

    I have been working with the Appcache service in Firefox for the last 6 months and everything went fine. until the last update 34.0 . even if I change the version of the .Appcache file it seems that the browser doesn't take it into consideration.
    the same code snippet work on IE and Chrome.
    is there something I should be aware of since the last update.
    thanks for your help :)

    Chris, I'm embarrased I hadn't thought of trying your tip.  It worked like a charm.  Thanks.

  • File Associations Did Not Update and Cannot Be Changed To Photoshop CS6

    Changing a file association is a simple matter you either do it in Windows Explorer in the properties or just use the edit in command in bridge.
    Except that neither is working.
    Photoshop CS6 is not even showing up as an option in either Explorer or in Bridge but it is ironically working in Lightroom.
    So again before someone doesn't bother to read this: I know how to change file associations.  I know the normal steps and it should be easy.
    It is not working and it is a pain in the you know what.

    Yes I've been through it pretty thoroughly.
    It seems Photoshop failed to register itself when installed so now "maybe" if I redo all of the installations including Alien Skin, OnOne, DxO, etc it might work?
    This is really irritatingly buggy.
    It does not even show up as an option anywhere in Bridge presently that i can see.

  • HT1386 devices not updating after sync and changes made in itunes not happening?

    Hi, I think my ITunes is corrupt and may need to be reinstalled? Changes made on the Mac in Itunes to playlist do not sync to either our 5 or 4S. other issues in Itunes I've noticed is that adding songs to playlists only works if I drag them...using the drop-down menu and 'add to' doesn't make the change occur.  Any suggestions?

    How is your iPod configured to sync with your iTunes library?  Automatically or manually?  In other words, what options do you have enabled from under the iPod's Music and Summary tabs?
    Syncing music to iPod or iPhone
    B-rock

  • CSCsy35054 - NP1/2 UDP conns not updated when MAC address changes

    We have a customer that appears to be experiencing this bug but with FWSM 4.1(15).
    There is a Linux HA solution on one side of the FWSM and when a failover occurs the Linux HA sends a Gratuitous ARP which updates the FWSM ARP cache however not all connections are updated.  If we sniff traffic exiting the FWSM we can see the destination MAC address for 'some' existing connections have the wrong MAC address (the old MAC address).  The clients are constantly sending traffic (SIP) to the Linux server so the connection states are continually refreshed.  If we manually clear the connections or let them time out by disconnecting one of the SIP clients for 30-minutes (the default SIP control channel session timeout) it recovers, however this isn't practical.
    We have recommended introducing a layer-3 hop between the FWSM and the Linux HA devices as we suspect this will solve the problem (i.e. the destination MAC will be the L3 next-hop and not the Linux server itself).  In looking at the issue we identified the behaviour as the same as that documented under BugID: CSCsy35054, however this says it appeared in 3.2(6) and was fixed in 3.2(12.1) & 4.0(5.4) however we are running 4.1(15) which is the latest release.
    Any other ideas?
    Andy

    Well your configuration looks great to me... nothing is obviously standing out at least..
    If the routers ping request makes it to your client, then the router must at least be able to arp for you.
    Have you tried to ping the gateway from the WLC itself? (vlan 171 it appears)
    I'm curious if the WLC even gets the ping through.  'show arp switch' on the WLC would show its arp table as well...
    I'm not very proficient with the router debugging, but perhaps there is some kind of ARP debug you can run to verify if the ARP request is even coming out of the WLC from your client?  
    Again, the config looks go to me, so either this is a situation where a nice save config and reboot would come in handy (perhaps coupled with shutting down the interfaces and turning them back on).....  or something just isn't right....
    Does this happen with the other vlans you have coming in to the WLC?  Perhaps there is just something going on the router side where it isn't responding to the arp....   which comes back to the whole shutting down interfaces and/or rebooting.   Obviously this isn't root-cause, but should at least provide sanity-check.

  • My TOC does not update automatically when I change the header text of a chapter

    Some chapters do; others don't. Anybody?
    Thanks

    The current version is 10.2.2, and that's why your iTunes hasn't automatically updated. Any currently available version of iCloud is a beta only, and so iTunes will not automatically update via Software Update
    When you do update, you won't lose any of your current iTunes Library. If you want to be sure, back up the library which, by default is in <your user name>/Music. If you copy the whole /Music folder, you'll be absolutely sure.

  • Condition value not updated when qty changed

    hi all,
    I have created a new condition ZPR1 (copied from PR00) and use a new formula for it.
    There is a problem when I change the qty after the item is billed.
    Suppose the original qty is 1 and total ZPR1 price is 100. When I change the qty to 2, the ZPR1 price is still 100! It will change to 200 if the item is not billed.
    Anybody encounters such problem and how to solve?
    Thanks

    Hi,
    I don't mean to change the unit price.
    I mean the condition value (the item total price) is not updated
    You can't change the price anymore in the condition tab after you billed
    But when you change the qty of the item, the total value should change accordingly
    And I think for my case I should not cancel the invoice. Suppose original qty is 10, and there is partial shipment of 7 and billed the customer. Later customer request to reduce the qty to 7 to complete the item. We should not cancel the invoice in this case.
    Try to test with PR00 and PN00, you will see the item value will be changed according to the item qty.

  • Bug:  Histogram Does Not Update when Using Painting Tools

    I was investigating something else, and I saw something not working...  I'm under the distinct impression that the Histogram panel should automatically update after every operation.  Having the Histogram panel displayed full-time on the screen, it should always be up to date.
    However, when I Dodge or Burn or even paint color on an image, the Histogram is not updating. 
    If I select one of the History states I've just created, it updates.
    Consider this simple sequence of operations:
    I'm able to reproduce this failure in Photoshop CS5 as well, BUT NOT IN CS4 (it updates in Photoshop CS4 after every painting operation), so clearly it's not a new bug, though somehow I've managed not to notice it in my years of using Photoshop CS5.
    Is it broken like this for everyone in Photoshop CS5 and 6?
    Could this be some twisted attempt to try to optimize painting performance?  If so, why isn't there an option to allow a user to request it to update on every operation on a fast computer with cores out the wazoo?
    -Noel

    More info:
    Just poking around in Photoshop CS6 to see what, if anything would make the Histogram display update...
    Even though the Refresh icon is disabled (and the "Uncached Refresh" entry in the fly-out menu is grayed-out), double-clicking in the topmost histogram display will force it to update (as described above by Conroy in post #1 above).
    If I change the selection Channel field in the Histogram panel, mostly it does not update, but when I change between some of the settings - for example between RGB and Luminosity - the graphs update.  Amazingly they revert back to the un-updated state if I switch the channel BACK to what it was!
    Making a selection DOES cause it to update.  
    Choosing Select - Color Range (just starting the function) DOES cause it to update.
    Hitting the quick mask mode button DOES cause it to update. Notably Edit in Quick Mask Mode is in the Select menu.  Could an association with Select be a clue?
    This bug is easy to reproduce, is shown to be a problem across multiple versions and multiple OSs, and in at least one case (Photoshop CS4 x64 on Windows 7 x64 here) it can be shown to work properly, so the code is probably not far off being right.  Seems to me this should be the kind of thing a junior engineer could find and fix so someone, say,  at Chris Cox's level could have it done before 5 today... 
    -Noel

Maybe you are looking for

  • Error when Launching Office 365 Pro Plus in Remote Desktop Services

     Hello, I have Windows Server 2008 R2 and I have installed Office 365 pro plus volume license but I keep receive the error when I launch the product  I receive this error "This Copy of Microsoft Office 2013 cannot be used on a computer running Termin

  • How do I burn one cd onto another

    Hi We have just just bought an iMac so it is a steap learning curve. Yesterday I tried to burn a CD from a CD. Normally a very easy process. I used the utility program in help and burnt a image but when I tried to burn it to another CD it kept saying

  • Unable to change FlexiJack mode on X-Fi Titanium

    Hello, there is no option to change the FlexiJack mode of my X-Fi Titanium PCI-E. I need to switch to Line-In, but it only gives me Mic input. I've seen that option in a screenshot under Digital E/A, but I can only change digital output between 48 an

  • Updating existing webpage

    I have loaded my webpage, and want to make some changes. I have made the changes in my local folder, then selected from the Site menu - Synchronize. I synchronize the whole site and put newer files onto server and It appears to go through all the ste

  • Editing photos in a pdf file

    Is it possible to apply a Photoshop curve, or profile to all of the photos in a PDF file globally?  I can edit the photos individually, but would like to just apply a curve to the file to brighten the photos up for press.  Or is there anything out th