SLFN: Move to next maintenance phase rejected.

Dear all i have red message in SLFN.
Checked SDMN document there is Yellow message saing:"You are not the current processor of the change document"
Cant understand where is relation between SLFN and Phases of the Maintenance cycle.
Regards Sindry

Hello, Glenn.
As long as you don't register the SPN for kerberos authentication, and servers are in the same subnets, I believe you'll be fine.

Similar Messages

  • In the previous version, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

    in the previous version  of Number, the menu table in table options, there is an option that gives me the option: the Return key moves to next cell. I do not see this option in the new number. can you help me please?

    Hi silvano,
    If you use a regular pattern when entering values, press enter (return) after entering the last value in a row. That will take you to the first Body Cell of the next row.
    Start in Cell B2
    1 Tab 2 Tab 3 Enter
    4 Tab 5 Tab 6 Enter
    7 Tab 8 Tab 9 Enter
    Now you are ready to type into B5 .
    Another way that some people find easier is to enter one column at a time
    Start at B2
    1 enter
    4 enter
    7 enter
    etc.
    Now start with C2.
    Use whatever suits your work flow.
    Regards,
    Ian.

  • See my problem no master record move to next record

    hi master
    sir
    i have master detail block master table have all data but detail no data i need feed data in detail then i goto in detail block write value and press F10 for save
    for new record in detail
    in detail blick post-block or post_record or post_insert event i write this code
    go_block('masterblock');
    next_record;
    go_item('detailblock.item');
    but not responses no master block move to next record still and my curser sitll in last postion
    sir how i move master record after save the detail record and jump to detail block for new record
    please give me idea or code
    thanking you
    aamir

    thank for reply
    sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
    sir how i avoid that window and directly move to next record
    please give me idea
    thanking you
    aamir

  • My code not give me result and error for move to next record please see

    hi master
    sir i import this file also
    import javax.faces.event.ValueChangeEvent;
    then my error remove
    i am use this code in button event
    getMfatableDataProvider().cursorNext();
    form1.discardSubmittedValues("virtualForm1");
    and my textField is bounded with data provider table field
    please give me idea how i show next rocord in page when user press button
    thank's
    aamir

    thank for reply
    sir your help very usefull for my but when i press F10 then system show massage do you want to save change the record
    sir how i avoid that window and directly move to next record
    please give me idea
    thanking you
    aamir

  • SAP ECC 6.0 Maintenance phase

    Dear Experts,
    We got notification from our EWA report that our SAP ERP 6.0 maintenance ended on 31.03.2013 as follows:
    0.0.1 SAP Application Release: Maintenance Phases
    SAP Product
    SAP Product Version
    End of Mainstream Maintenance
    End of Extended Maintenance
    SAP ERP
    6.0
    31.03.2013
    31.03.2016
    Your system P01 is running on SAP ERP 6.0. Mainstream maintenance for SAP ERP 6.0 ended on 31.03.2013.
      Recommendation:
    We recommend that you upgrade your system. For more information, see SAP Service Marketplace at service.sap.com/upgrade.
    If you decide to continue using the current release, SAP offers extended maintenance for SAP ERP 6.0 from 01.04.2013 to 31.03.2016.
    while SAP note 1648480 - Maintenance for SAP Business Suite 7 Software tells that the maintenance is extended to 2020, please also refer to link: SAP AU & NZ - SAP extends mainstream maintenance for SAP ERP 6.0 and Business Suite 7.0 until 2020
    Please advise.
    Regards,
    Rudi

    Dear Experts,
    We got notification from our EWA report that our SAP ERP 6.0 maintenance ended on 31.03.2013 as follows:
    0.0.1 SAP Application Release: Maintenance Phases
    SAP Product
    SAP Product Version
    End of Mainstream Maintenance
    End of Extended Maintenance
    SAP ERP
    6.0
    31.03.2013
    31.03.2016
    Your system P01 is running on SAP ERP 6.0. Mainstream maintenance for SAP ERP 6.0 ended on 31.03.2013.
      Recommendation:
    We recommend that you upgrade your system. For more information, see SAP Service Marketplace at service.sap.com/upgrade.
    If you decide to continue using the current release, SAP offers extended maintenance for SAP ERP 6.0 from 01.04.2013 to 31.03.2016.
    while SAP note 1648480 - Maintenance for SAP Business Suite 7 Software tells that the maintenance is extended to 2020, please also refer to link: SAP AU & NZ - SAP extends mainstream maintenance for SAP ERP 6.0 and Business Suite 7.0 until 2020
    Please advise.
    Regards,
    Rudi

  • Why doesn't Firefox run an adobe flash player slide show (no arrows to move to next/previous slide), but internet explore does?

    When I try to run a slide show in Firefox, the first slide displays but the arrows to move to next/previous slide do not appear. When I try in Internet Explorer, the arrows appear. Flash Player is enabled in Firefox. There must be another setting I need to adjust. I am running Windows 7. I don't see how to access Tools menu item in Firefox. I don't see where I can check my Firefox version. It is the current version as is Flash Player.

    When I try to run a slide show in Firefox, the first slide displays but the arrows to move to next/previous slide do not appear. When I try in Internet Explorer, the arrows appear. Flash Player is enabled in Firefox. There must be another setting I need to adjust. I am running Windows 7. I don't see how to access Tools menu item in Firefox. I don't see where I can check my Firefox version. It is the current version as is Flash Player.

  • Automatically upgrade any superseded versions of this application not auto installing - Status always waiting for next maintenance schedule

    Hello,
    I'm trying to deploy an application to a user group with the option checked for "Automatically upgrade any superseded versions of this application" but it never auto installs.
    - The application is set to install to system whether the user is logged on or off. 
    - We do have user affinity, therefore the user does have a one or more primary devices setup.  
    - If I run the install manually, it will superseded and install the new application and uninstall the old applications.
    - The estimated installtion time minutes is set to 0
    - The maxmimum allowed run time is set to 120 minutes.
    We're on version SCCM 2012 SP1.
    My assumption of how it should work
    If the user is logged in or NOT and it's during the maintenance window, it should auto install the application. Maybe I'm wrong.
    Here's the scenario.
    User JohnDoe has application Viewer 1.0 installed on his machine.  He installed this app via the SCCM application catalog.   We now need to deploy Viewer 2.0 of this application.   I want to ensure when it's deployed it replaces Viewer 1.0 hence
    the reason to check the "auto upgrade.."check box.   
    Here's what happens. In software center, it will pre-downlaod the software and then set the status to "Waiting for next maintenance schedule".  The problem is that the status stays like this forever.   We do have maintenance windows set
    on the device collection that JohnDoe's primary device is part of.  Here are our maintenance windows.
    - Daily - 9PM to 5AM = 8 hours
    - Weekly - Saturday - 12:00AM to 12:00 = 24 hours
    - Weekly - Sunday - 12:00AM to 12:00 = 24 hours
    Coordinated UTC is not checked.
    The business hours in software center are set to 5am to 10pm.
    One would assume that it would auto install during the night since we have a big maintenance windows. I checked the ServiceWindowmanager.log and it does seem to show the various maitnenance windows.
    Here's what I've tried
    - If I make the deployment required, it will install right away regarless of maintenance windows.  However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software.  
    - If JohnDoe clicks install in Software center or application catalog, it works.  There's nothing wrong with the packages.  The issue seems to be related with the maintenance windows. 
    - If I disable the maintenance windows, then it seems to work but only when I'm logged in.  It still does not work if I'm logged out.  It only kicks off the installation when I login if it's not during the business hour set in software center.  
     We need the maintenance windows since we don't want windows patching to occur during the day.
    - I searched and ran the report to ensure there's not another maintenance windows setup that would prevent this from installing.
    Our current workaround
    To ensure users are using the latest version, we deploy the application required for a couple of days, then delete that deployment once we reach a high 90%.  The problem with that is if some computers are turned off, they would be using the older version
    and it will never get upgraded unless the user installs it manually.
    Has anyone encountered this?  Any other log files I should look at? Anything else I should verify ?  I know in SCCM 2012 R2, you can set the maintenance window to only apply this schedule to software update (patching) but that option doesn't seem
    to be available in SCCM 2012 SP1.
    Any help, suggestiong, I will take.  Thanks.

    - If I make the deployment required, it will install right away regarless of maintenance windows.  However, i don't want to use this option because if the user logs in to other machine (e.g. boardroom computer), it will auto install this software. 
    Re-check your deployment, specially the user experience:
    If you've checked the box next to "Software installation", it will install after the deadline has passed and ignores maintenance windows. Change the deployment to required and uncheck that box and the software should be installed according to your
    maintenance windows.

  • Move to next record / wildcard search

    Hi
    Hope you can understand this explanation..
    I have searchable database for Holiday & Residential
    property here
    http://www.roomtobreathesl.com
    (search facility in the navigation menu)
    The results page for this search works fine for when you
    specify a certain
    area, certain amount of beds etc as it only shows a small
    amount of
    properties.
    However when you do a search for any area / any amount of
    rooms / any type,
    the query brings up over 40 results, so a move to next record
    is used. This
    is where the problem lies. You cannot move to next record as
    the 'Next
    record' link is looking for another wildcard search (see
    status bar).
    Any ideas how to remedy this?
    Thanks for any help
    Gary

    oops!
    Sorry sent you the previous version that's online.
    I also tried doing a search and replace and changing all
    'Request.Form' to
    'Request'
    Still didn't work.
    This is how it was when it wasn't working.
    <%@LANGUAGE="VBSCRIPT"%>
    <!--#include file="Connections/YotShop6.asp" -->
    <%
    Dim rsResults__MMColParam
    rsResults__MMColParam = "1"
    If (Request("yscon") <> "") Then
    rsResults__MMColParam = Request("yscon")
    End If
    %>
    <%
    Dim rsResults__ysbed
    rsResults__ysbed = "1"
    If (Request("ysbed") <> "") Then
    rsResults__ysbed = Request("ysbed")
    End If
    %>
    <%
    Dim rsResults__MMColParam3
    rsResults__MMColParam3 = "xyz"
    If (Request("type") <> "") Then
    rsResults__MMColParam3 = Request("type")
    End If
    %>
    <%
    Dim rsResults
    Dim rsResults_numRows
    Set rsResults = Server.CreateObject("ADODB.Recordset")
    rsResults.ActiveConnection = MM_YotShop6_STRING
    rsResults.Source = "SELECT * FROM YotStock WHERE Area LIKE '"
    +
    Replace(rsResults__MMColParam, "'", "''") + "' AND bedrooms
    LIKE '" +
    Replace(rsResults__ysbed, "'", "''") + "' AND type LIKE '" +
    Replace(rsResults__MMColParam3, "'", "''") + "' ORDER BY
    price ASC"
    rsResults.CursorType = 0
    rsResults.CursorLocation = 2
    rsResults.LockType = 1
    rsResults.Open()
    rsResults_numRows = 0
    %>
    "Julian Roberts" <[email protected]> wrote in message
    news:euj4if$ici$[email protected]..
    >>> Use Request instead of Request.Form for runtime
    parameters.
    >
    > You haven't done it :)
    >
    > --
    > Jules
    >
    http://www.charon.co.uk/charoncart
    > Charon Cart 3
    > Shopping Cart Extension for Dreamweaver MX/MX 2004
    >
    >
    >
    >

  • Move to next field after typing item code in a document

    Hello experts,
    In a marketing document we type 1000 in item code field and press tab.
    we would like the cursor to move to next field but instead a list of items is being opened.
    in the list there are two items 1000 and 10001
    in another company we can do it but we couldnt find what is the difference between the two companies setup definitions.
    Thank you,
    Rinat

    Hi,
    Please make sure item number fully entered at item code. If not complete, then list of items window will open.
    If possible please post screen shot above window
    Thanks & Regards,
    Nagarajan

  • Help: Data validation before commit or move to next record

    The form that I am working on allows data insert. It needs to have a feature to inform the end user for incomplete field(s) before commit_form or move to next record for updating. Please let me know how you would do it.
    Thank you,
    Jimmy

    To prevent cursor movement out of a field in a When-validate trigger, all you do is    Raise Form_trigger_failure;However, if the field is null and the user does not enter anything while tabbing through, or just clicking in then clicking somewhere else, the When-validate-item trigger does not run. You have to specifically check if the field is null in the When-validate-record trigger.

  • How to move to next record of the databank file using custom code

    hi,
    can someone please tell me how to move to next or the previous record the Databank file. i found a funtion setcurrentdatabankrecord(), but i am not able to use it.
    thanks in advance...

    Hi,
    I recently had the same problem, here's my solution:
    "setCurrentDataBankRecord" is available only to External Program Control.
    I used the VB of an empty Word2002 Document.
    1. you have to reference the webAnlyst.exe in the object-catalogue
    2. create a module via the menue
    3. type in the code
    This is the code I used - some of the code is just for control
    Private Sub TestSetDBRec()
    Dim pdtest As webanlst.ProgT
    Set pdtest = New webanlst.ProgT
    Dim currDBI, numRecsCurrDB As String
    ' Workspace öffnen
    pdtest.play.OpenWorkspace "VBTest"
    ' Script öffnen
    pdtest.play.openScript "BM2B_VK_Änderung"
    ' DB-Abfragen
    numRecsCurrDB = CStr(pdtest.play.getDataBankSize)
    currDBI = pdtest.play.currentDatabankIndex
    pdtest.play.setCurrentDataBankRecord (2)
    currDBI = pdtest.play.currentDatabankIndex
    ' jetzt das Script abspielen
    pdtest.play.doScript "BM2B_VK_Änderung"
    End Sub
    This works! You can also looping through the database by getting the current value and set the value back increased by e.g. one
    Hope it is helpful!

  • How to move to next record in PHP+ORACLE env

    I install php3 +ORACLE in RH linux 6 box, the works fine.
    I write a app to browse record in oracle table,I write two
    frame, one top_frame,one body_frame,but How can I to move to
    next record?
    thanks any idea!!
    null

    one record item at a time...

  • Workflow not move to next level approver...

    Hi Friends,
                           I have developed workflow for appraisal. Employee enter his appraisal ratings and submit  and then first,second,third level approvers enter their ratings one after another submit.
                            whenever one level approver submit,i have updated th status in our customized table and pass the status to workflow method through Set Parameter command. For example ,when employee enter his rating and once submit, i have update the status field in table with value 'Pending with First Approver' and pass the status 'pending with first approver' through Set Parameter command to workflow method. In workflow methods , I receive status value using Get Parameter command and based on tht value respective workflow item will moved to inbox of First level approver.
                      Its working fine. But  SOME TIMES status updated in table properly and workflow item keep retain in same level inbox even after submit successfully,instead of move to next level approer.
                      For example, once employee submit his appraisal rating,status 'pending with first level approver' updated in table properly. But workflow item still keep retain in employee inbox only and first level approver do not receive workflow item in his inbox.  I  tried to refresh that variable which i used in set parameter/get parameter command . but same proble continue.Could you please suggest me what will be reason for this issue?. Thank you.
    Regards,
    Hockteck..

    Hi Rick,
                           Thanks for your response. I am using Z table for reporting purpose. In Z table I update status like 'pending with employee','pending with first approver',etc. If the end users wants to know the status of apprisal for a particular employee,they can use this report and react according to the updated status.
                                               I have mentioned in this thread about  both this Z table update and pass status using set parameter id, because both these statment executed after employee or approvers submit. But Z table updated successfully and set parameter not passed successfully.
                         In my workflow I am using Loop step and this loop will continue to run  till the status become 'Completed'. when third level approver submit his appraisal details that time i pass the status 'Completed' to complete the workflow .For employee,first and second level approvers I pass the status like 'Pending with Employee','Pending with First','Pending with Second'.
                       Whenever I pass the status to workflow,using Function Module i find the next level approver based on the status. For example If the status is 'Pending with First' then in the function module I find the first level approver and pass his UserId as current agent name. Whenever this issue happen I debug and check the current agent id . But it shows only Employee ID.If the status 'Pending with First' passed to workflow properly then FM could have pass the First level approver ID. But since current agent id shows Employee Id, workflow keep exist in Employee inbox ,even after he submit successfully.
                         If 10 employees submit his apprisal ratings,for one or two employees this issue happen and for rest of the emplyess workflow completed successfully with all  approvers submissions. Any suggestions?.
    Regards,
    Hockteck.

  • On nView titlebar, clicking "Move to next display", The resizes bigger, but not smaller.

    Hello and TIA for your help.
    Environment:
    Lenovo T61 laptop (model 6457-Z4U) set to 1680x1050
    Internal video controller: NVIDIA Quadro NVS 140M
    External monitor: Samsung Syncmaster 940BF set to 1280x1024
    Win XP SP2
    Problem: I am using the nView Desktop Manager and nView Control Panel. On the nView titlebar on the laptop, when I click the "Move to next display" button, then the window does move to the external monitor, and sizes the window to 1280x1024 to fill the screen. Good.
    But, when I do the same on the external monitor (click the "Move to next display" button), then the window keeps the same size, and does not resize to the larger laptop window size (1680x1050).  
    In other words, the windows resize to the smaller display, but not the bigger display. What setting should I change?
    Leafgreen

    I think you messed up the embedded features of the question slides. Have a look at:
    Question Question Slides in Captivate - Captivate blog
    Personally I will never allow Backwards movement at all in a quiz. If you do that, you can drag the Next button under the Clear button. The Next button has a double functionality: during the Quiz it acts as a Skip button and that is what you do not want. During Review it acts as a Next button. If you do not use Review, you don't need the Next button. If you want Review, dragging the Next button under the Clear buttons solves the problem: during Review both Clear and Submit button will disappear and the Next button will be come available.
    I cannot see directly what happened with the actions that are not executed, unless you have another shape button on the question slide that pauses after the pausing of the Submit button.
    Your setting 'Required....' can cause problems as well, especially since you allow free navigation within the quiz (and outside) with the Back and Next navigation.
    Please, try to read that blog post, and if you have more questions, will try to answer them.

  • Move to next record

    move to next record wont work with tom-muck horizontal repeat
    region anyone got an alternative or know why its throwing back
    errors

    i got it workin sorry for wasting your time

Maybe you are looking for