Slide show error

Why do I get the error unexpected log when trying to save a slide show as a video in Light room 4? How do I fix it? Nee slide show very soon. Thank you in advance for your help.

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Similar Messages

Slide Show ERROR, Internal software\Vobulator\BlockPlanner\.cpp Line 217

I'm putting together a slide show DVD. There are a total of 7 slide shows containing 480 pictures. All pictures are jpg's about 1000X1600 pixels and 500KB-700KB each. I have 3 menus for navigation. Not all of the chapter menu buttons point to a "slide show", some of them point to a picture inside certain slide shows according to my client's requests. (example, slide show 1 contains 70 pictures. Chapter 1 points to "slide show 1" Chapter 2 points to "slide show 1 photo 50"). All slide shows are linked so that when the first slide show is over, it will automatically "end action" to the next slide show etc... All my settings are typical. NTSC 4:3 SD 720X480 progressive.
There are NO video files in my DVD at all. No timelines at all. No audio at all.
The Symptoms/problem that I'm getting is this, when I try to Preview my DVD and ALSO when I try to build my DVD, the build will go through and "build the slide shows" then after it does that, this will come up
I've read some of the previous posts (one of them is in French for cryin out loud. Had to use Bing translator and it sounds all weird). What I can gather is this,
Re: internal software error: .\Vobulator\BlockPlanner\BlockPlanner.cpp, line 217
I found out it was due to selecting an image file as the video layer
in a menu, causes the error everytime. I just paste the image in with
'edit in photoshop' instead now. But thanks."
Another person said just about the same thing... The only problem is, I have no idea what this means. I don't know what it means to "select an image file as the video layer in a menu..."
Hardware/software is as follows:
custom build:
i5 processor (4 core) 2.6ghz
8 GB RAM 1333MHz
300GB C: drive (2X150 GB 10K RPM Raptors)
1.2TB D: drive (2X7,200 RPM 640GB WD's)
Burner is LG Super multi
secondary burner is Sony Commercial Blu-Ray burner
Video card is Saphire Build (Radeon 5450 PCI-E 16X)
Windows 7 X64 Pro
All Adobe is CS5 Production package.
If I'm leaving anything out, please let me know.
HELP! and Thanks. I'd really love to fix this without rebuilding the whole DVD. Take long time.
TEX

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Ellements 11 slide show error

When using Elements 11 organizer to view a slide show and you go to full screen preview the following pops up: An unknown error -2147024770 occurred while previewing slide show. You can watch the slide show on the small window but not on full screen.

You really gain nothing by posting the same thing twice... http://forums.adobe.com/thread/971701

Premiere Elements slide show error mesage

After preparing a slide show I went to "Share" and checked "Burn Video DVD/Blue ray. When Premiere Elements loaded and went to download my project file I received an error message as follows "This type of fie is not supported, or the codec is not installed".
I cannot create the slide show on a dvd.

rickyrun
I had been working on the Premiere Elements 13 Windows tryout, trying to cover as much as possible. The tryout has expired. I should have the purchased version by the end of the week.
Elements Organizer 13 is a "new breed" of Elements Organizer along with it "Slideshow".
You say that you have created your slideshow (presumed with one of its 5 themes) and saved it as an Elements Organizer 13 Slides Show Project.
From that point on, this is my take on this which I will confirm again later in the week when I have the purchased version...
a. The Slide Show Project is a creation of the Elements Organizer 13 and remains in the catalog, available for re-edit (limited).
b. The only way out of the Elements Organizer 13 for this created slideshow is Export to yield an AVCHD.mp4 file either 720p30 or 1080p30 which
is saved to the computer hard drive.
c. It is those AVCHD.mp4 files that can be imported into a Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets.
d. I do not recall there being a viable opportunity to use the Slide Show Project thumbnail in the Elements Organizer 13 workspace for a Share/Burn Video DVD or Blu-ray.
Elements Organizer Help | Create slideshows
More later.
ATR

PSE 9 Slide Show error message

I get message "The selected file cannot be played because your system does not have the required compressor/decompressor installed Codec) when I try to add a song from Itunes library to a slideshow. What doies this mean? How do I fix it? I tried in on my Dell and Toshoba laptops. Same thing happened. Thanks.

tonystef wrote:
Still have pixelated slide show. Repeated the process, ensuring that everystep was at max resolution. The slide show in PSE 9 is still pixelated. The photos in the folder they came from are sharp.
I exported to Premiere & burned a DVD. Pixelated on my computer as well as my near new LCD TV.
Whats wrong with this PSE process - anyone know?
more information may help analyze your problem
1 -- What are the pixel dimension of the photo files that are used in this slide show ?
2 -- Did you add Pan or zoom when making the PSE slide show ?
3 -- When you say you exported to Premiere Elements,
-- did you only make the DVD menus and burn the DVD disc in Premiere Elements ? OR
-- did you also Edit the video in Premiere Elements using its Timeline or Scenes functions ?
4 -- Are you creating the DVD as Widescreen (16:9) or as Full Screen (4:3 aspect ratio) ?
General comments --
Since you are creating a DVD (which is standard definition with pixel dimensions of 720 x 480 for NTSC in USA or 720 x 576 for PAL) inputing a high pixel resolution photo file to the slide show process can actually produce a lesser quality image in the DVD video in the final image. Generally recommended are using a photo editor for downsizing the photofile resolution to approx 1000 x 750 for 4:3 aspect ratio before you start making the slide show.
If you respond that you did use pan or zoom and you respond that you worked with (edited) the slide show video in Premiere Elements,
-- then there is a Premiere Elements parameter of Scale to Framesize that may be a significant factor in why you see pixelation.
-- Also it will be good to check the Premiere Elements project setting
When playing a DVD on a high resolution screen (either HD TV or computer monitor) the effectiveness of the upscaling hardware or software doing the playback is a factor in the quality of image that you see. I don't suspect that this is your only problem, but it can be a factor.

Encore CS5 - Slide Show Error

When I try to import my Canon 21 MB still .JPG images into Encore's CS5 slide show application I get the following message below. On the other hand, if I use Camera Raw or Photoshop to convert the image sizes to 1920 x 1080 which reduces the overall size of the image before I import, I get no such message. Is there a size limitation with Encore to what can be imported? I can import these same 21 MB still images into Premier Pro CS5 without any problems either.
Richard

It is always best to Scale your still images in a program like PS, rather than feed the full-sized images into either an NLE, or an authoring app., like Encore. This saves the NLE/authoring app. from having to process those wasted pixels, and actually will improve the overall quality, as the Scaling algorithms in PS are much more efficient, and even offer additional control, like Bicubic Sharper, and Bicubic Smoother. Depending on the exact image, I might chose one of those for some, and the other for the rest.
So it's a win-win - better quality and greatly reduced overhead on the program and on the system.
Good luck,
Hunt
PS - almost all of my images come from Nikon Camera RAW (NEF's), and are all processed in PS. I do a Save_As to PSD, when I have Scaled. I keep JPEG out of the mix, unless a client supplies only those. Even when starting with JPEG's, I will do the Save_As to PSD, so no more JPEG compression. This ARTICLE will give you some tips on automating the Scaling. Also, remember that Video is 8-bit and should be RGB, so check those Image Modes.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

Because the location for each song in your library is on your hard drive. If the hard drive isn't there, how can iTunes play it?
You'll have to move/copy the music from your hard drive to your computer's hard drive.
Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
-Delete EVERYTHING from iTunes, so that your library is now empty.
-Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down. You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
-Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes. Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked. You can close Preferences now.
-Now, drag and drop your music from your hard drive into your iTunes library. iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
Shouldn't have any more problems...

When I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

when I try to burn my slideshow.mov to a dvd disc, it will burn but when i put it in the dvd player it says 'disc error'. I have burned it thru iDVD before but forgot how to do it and it won't do it now. The slide show is on my desktop

Rather than burn directly to disk follow this workflow to help assure the best quality video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

HT1338 I have a slide show in iphoto that I wish to export to iDVD, and when I attempt that I get and error message triangle, ! with the note "This movie contains an invalid data reference" iphoto help does not seem to have any suggestions, that work.

I have a slide show (project) that will not export. The error triangle appears with the message: "This movie contains an invalid data reference" What is the issue, and what is the solution?
jh

I found that the issue was with the title side, it had too many characters in the slide. When the number of characters was diminished, the show loaded without issue.

Error message in iDVD with Slide show from iPhoto 09

I have about 130 photos in a slide show with music in iPhoto 09. The slide show settings are for the whole slide show are Ken Burns effect, each slide about 8.1 seconds, random transitions, and music fit to the slide show..I Went to "Share" Send to DVD.
In DVD, I type in a title and a photo in the drop zone, then I chose as a Burn as a Disc Image. It does some encoding and then a I get an error message when it finishes that says " There was an error during the rendering of the menus/slideshows. The burning process has been canceled".. This basically tells me Nothing!!
What is wrong? How can I fix this? Using OS 10.5.7 intel dual core. iMac desktop.
Previously, I had successfully created a DVD of this same slide show, made one DVD, but after seeing in on my DVD player, I tried to fix some things, like fitting the music to the slide show, but that is about all. Frustrated!!
Any help will be appreciated....Thanks.

This sounds more like an iDVD issue than an iPhoto one. I would post on the iDVD forum here:
http://discussions.apple.com/forum.jspa?forumID=1310
Regards
TD

Iphoto crashing and ERROR message when trying to EXPORT to slide show

I am producing a simple Slide Show to be shown tomorrow at 8am.
I created it in IPHOTO but an older version. I did some tests last night and today. Worked fine.
Now that it is done I tried to EXPORT it to Quicktime, as a H.264 Quicktime movie.
Dimension 1280x 720
Stills only and no music. Classic with simple dissolves from one photo to next.
Export and proceed and I leave it alone. After about 1/2 hour or so it crashes and give ERROR message and say
"unable to process" or complete.
I have tried several times and changed specs. Still crashes.
What happened to Apple's Chat Support? Are then not online after a certain time?
On an IMAC with 16 Gbs of RAM, and have space left on drive. this is not complex.
anyone? It is due tonight so I can Hightail send it to AV people and it needs to be downloaded
tonight or EARLY tomorrow for showing at 8am.
thanks to anyone who can help.
jc

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
☞ If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
☞ Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Error burning Slide Show to DVD

In the completion stage of the DVD burn in PreE 4 I receive the following error message.- Device error - Sense Code (37304) -program memory area / rma update failure.
Can anyone tell me what the problem may be? Previously i have burned a slide show successfully. Now, after 2 trys for this slide show I receive this same error message.
Sanray19

This error can display two reasons
1. Bad quality disc solution : Use a new disck
2. DVD driver is incorrect or Power supply or disconnect the cable while encoding process is ongoing. : solution : Burn it again.
3. You are working long time in editng, this scenario memory would increased, so that application would not get enough memory generate encoded file. Solution : Restart and burn again.

Error exporting slide show from iPhoto 08

I get this error when trying to export a slide show from iphoto '08 to a .mov file. Does anyone have any ideas how to fix this? Thanks.
OSStatus error -9459
Kevin

SystemPreferences > Energy Saver, set the machine to never sleep.
Regards
TD

PSE 9 Organizer error codec trying to add an Elements audio file to slide show

I am using PSE 9 to build a slide show. When I add audio, I can use mp3's from my music library in the slide show without any issues ...
but I am getting the following error when I try to add an Elements audio file (example " A _Taste_Of_Sicily.mp3)
This is the Organizer error message:
"Unable to add the audio file (C:\ProgramData\Adobe\ElementsOrganizer\8.0\Music\A_Taste_Of_Sicily.mp3).
The selected file cannot be played because your system does not have the required compresser/decompresser(codec) installed."
I had PSE 8 and upgraded to PSE 9 - I noticed the error file detail shows 8.0 - Is this my problem - maybe an incomplete upgrade ? (I've made several slideshows mixing photos and music, on an older computer using PSE 8 and never ran into this issue.)
Below is my system info in case that helps:
OS=Windows 7 Home Premium 64-bit on an HP Pavillion dv7
Intel(R) Core(TM) i5-430M Dual Core processor (2.26GHz, 3MB L2 Cache) with Turbo Boost up to 2.53GHz
8GB DDR3 System Memory (2 Dimm)
500GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
512MB ATI Mobility Radeon(TM) HD 5470 switchable graphics
IDT High Definition Audio CODEC
Thanks for any help !

beccarie1 wrote:
This is the Organizer error message:
"Unable to add the audio file (C:\ProgramData\Adobe\ElementsOrganizer\8.0\Music\A_Taste_Of_Sicily.m p3).
The selected file cannot be played because your system does not have the required compresser/decompresser(codec) installed."
Does that file extension really have a space in it? If so, remove the space.
Ken

I am trying to add music to my slide show and I get this error:

I am trying to add music to my slide show and I get this error: The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed. I went to the Adobe site and downloaded a codec program, and restarted but still got the same error. Any help would be much appreciated.
Anne

Thank you - I followed the instructions attached to your response, and I deleted the artwork from the three songs that I want to use, however, when I drag them into Photoshop I am still getting the same error message. I also don't see an option to convert the song to an MP3. I tried going to File and Get Info, and there isn't an option. I also tried right click on the song, but didn't see anything there either...?

Slide show error

Similar Messages

Maybe you are looking for