Slider for Display and Control Time of Video

Hey Community,
I run a Video with the IMAQ/ AVI components. Therefor i want to have a timeband as there is one in a normal video player. The Time runs and if I click on the band the video should jump to this moment of the video. Is there a possibility to manage that or do i have to seperate the display of the time and an extra Control to jump to the point of interest?
In the file there is a little example what i mean. (LabView 2010)
Thanks Philipp
Solved!
Go to Solution.
Attachments:
Slider.vi ‏23 KB

Hi Philipp,
you could do that by modifying the "Read AVI File Example.vi" (see Screenshot). I also attached the VI saved with "For previous version", I hope that works for you too.
This example uses the "IMAQ AVI2 Read Frame VI" function where you can specify the desired frame. So you only have a control that can modifies the current frame, which is normally incremented every loop iteration.
Best regards,
Christoph
Attachments:
screencapture0.png ‏84 KB
Read AVI File2.zip ‏27 KB

Similar Messages

I have a new Macbook pro, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop.

I have a new Macbookbook, about 2 months old, and at times running video, the fans starts and does not stop. how do you get it to stop. Also i am thinking once the video is done the fan should be slowing down and getting quiet on its own.

Your fan(s) will run at high speed (i.e., loudly) while video is playing, and you can't get around that.
If your fans are not slowing down within 2-4 minutes after CPU- and/or GPU-intensive usage ends, and the application that was showing the video is still running, Quit that application. (In fact, if you're accustomed to Windows, you may not realize that simply closing a Mac application's window does not quit the application. You still need to use the Quit command in the application-name menu. There will always be a bright dot beside or below the application icon in your Dock for each application that is open.) Quit the ones you aren't using, and see whether that allows the fans to slow down without restarting the machine. If that doesn't do the trick, reset the SMC:
http://support.apple.com/kb/HT3964?viewlocale=en_US&locale=en_US

Passing two values in a column prompt for display and filtering

Hi All,
Is there a workaround to use two columns in a prompt for display and passing the input value for a prompt value in dashboard prompt? For eg we want to display the description in the prompt but pass the id to the filter value or presentation variable, just like we have in bi publisher,LOV automatically grab the two value for display and actual value to pass to the query.Therefore, user will click the description and corresponding id will be saved in presentation variable from the prompt .
Thanks,
Sushil
Edited by: 872073 on Apr 5, 2013 11:06 AM

Check this
http://www.rittmanmead.com/2010/08/oracle-bi-ee-11g-handling-double-columns-iddescription-interoperability/

I just bought iMovie for ipad and i cant load videos from gallery

I just bought iMovie for ipad and i cant load videos from gallery. Generally i cant load any file, but music files into iMovie
I have tried to delete and reinstall it, turn on and off the ipad, go to iphoto and export files to imovie, but nonthing works... Help?

Ziatron is correct that Flash does not work on an iPad, but it does work on a Mac. See Adobe Flash Player 11.2.202.160.

Can anyone say what makes "preparing video for display" take more time?

i searched old threads. the topic has been raised before but there didn't seem to be any satisfying answer... i have noticed that when i have 3 or more active video tracks and i move a shot on the timeline, i get the "preparing video for display" message. it takes about 20 second to display, which is a long time to wait for every little adjustment i try to make... and i'm not using more than 5 tracks (which doesn't seem like that much either...)
i am using FCP 5.0.4. my whole project is 5mb and the sequence is 4 minutes long. got some effects but nothing major at this point. i'm worried it'll get much worse as i add effects and layers.
does anyone know what may be causing this or how can i make this process faster?
is it something that can be adjusted in the settings?
it doesn't seem normal. i've never seen anything like this in AVID...
thanks...

I'm at a loss at this point.
2 things...exactly what version of QT are you running? (may/may not make a difference)
Then, here are a couple of links for ways to trash preferences. Since you're on FCP 5.0.4, you should be good with the Anders Holck FCP Rescue 5.
Caveat...once you've trashed your preferences you'll need to reset them...might want to make notes of how they're set now.
If you use FCP Rescue 5, it will enable you to create a backup of your new prefs after they've been reset, then if you ever need to trash prefs again, you simply use the 'Restore' feature to get them back the way you want them quickly.
http://fcprescue.andersholck.com/
http://www.digitalrebellion.com/pref_man.htm
http://www.fcpbook.com/Misc1.html
Hope that helps,
K

Table for Start and End time of Process Chain

greetings experts,
Hi All,
I Have to give an Excel Sheet to Top level manager on Start and End Time of Data Load in each InfoPackage (PSA Load) triggered by Process Chain, please let me know if there is any table who keeps these information.
Regards
Sulochan

Hi,
You can use the program /SSA/BWT to give the Timings of the process Chain runs.
1) To access this tool Goto SE38 .Type in u201C/SSA/BWTu201D as the Program name and click on execute. The list of all the tools that this Program contents are displayed.
2) By default the option u2018Process Chain Analysisu2019 is selected. Now click on the execute button. Then you are displayed with the options through which you can select to perform analysis at Process Chain level or Process Type level. (Along with that, the Time Zones used to display the information is also displayed)
3)If you click on the button u2018Process Chainsu2019 a window Pops up, here you need to provide the Chain-ID and/or the Log-ID and the Start Date/Time and the End Date/Time.
4)Decide the parameters to enter as per your requirement, suppose your requirement is to check the runtime of a particular process chain for the past one week, then provide the technical name of that chain in the field Chain-ID and the start and end dates as per last one week and click on execute.
5)Then the logs of the Process Chain for the selected dates are displayed along with the status (Red, Green or Yellow). The logs of the local chains (if any exist in the Process Chain selected) are also displayed (Much more additional information exist which is self explanatory). Now you can have a look at the Runtimes of different logs.
Regards,
Suprajah.

Report for login and logout time

Dear All,
Please can some one help me urgently.
I have to find out users login and logout time over the last six months. I need to find out how many hours per user are being used. What report do I need to run to find out ?

Hi,
Check the system log saved in your system.Normally the basis admin woulfd know better about this .Only they have the access and maintance for it.
Anyways u can try out some other ways also
Profile parameters rslg/local/file
/usr/sap/<SID>/D20/log/SLOG<SAP-instance_number> Specifies the location of the local log on the application server.
Alternatively try to table - SYST
Note: there are many transaction codes that can be accessed only by super users .do tell me if u have one so that i can give you?

How to access custom property for attribute and control in .vm file?

Hi,
I have created custom properties in OPM for attribute and apply also that properties to attribute.
But if how to access that value in .vm file?
I accessed using
$attribute.getProperty("ScreenProp", "default value")
but it's not working but same is worked for screen custom property

$control.getProperties().get("PropertyName") works for custom properties on a control
If you output $control and $control.getProperties() to the html you can lookup the API for the used classes.
I can't give an example of the html because it's stripped in this forum
Edited by: Peter van de Riet on 20-mei-2011 14:18

Where does one manage date formats for display and input

the user specification is that dates be displayed as YYYY-MON-DD. Is there a config or properties file which contains the date format for display? Is there a calendar drop-down that can be positioned next to a date input field for a question on a screen?
Thanks,
Allan

Hi Allan,
Curious why the rule project wasn't created with "English (Canada)" initially? If your project is English (UK) with the default configurations for that locale, then I assume your currency values are appearing in OWD with the GBP symbol (£) instead of a dollar sign ($)?
As for the impact of switching… I highly recommend getting confirmation from the OPA Dev team before doing it, but in the meantime, if you wanted to experiment on your own with a separate test rulebase (as opposed to whatever formal rulebase you're working on), here are my observations from an initial look… (FYI, I'm an experienced OPA rulie, but I'm non-technical and not in the Dev team, so best to check with them!)
I poked around the language parser files and saw that English (UK) has an English (UK) verb list, whereas English (Canada) uses the English (US) verb list. The vast majority of verbs are identical in all the variations of English, however, there are a couple which differ. So if you've used any verbs which have a different spelling between the 2 lists, there may be some attribute text to tweak, e.g.
- English (UK): the person travelled to Australia
- English (US): the person traveled to Australia
- English (UK): the person cancelled the reservation
- English (US): the person canceled the reservation
I saw some other different files between English (Canada) vs English (UK), but didn't notice anything in them which I'd expect to impact the rulebase.
As for how it might impact other components:
* screens file and the properties file – May be some tweaking depending on how you addressed the verb spelling issue above.
* regression test files – May be some tweaking depending on how you addressed the verb spelling issue above.
* messages.(locale).properties – The default messages.(locale).properties file appears to be based on the Language setting of the Project. I just tested this and OWD used a different messages.(locale).properties file when I changed the Project Language (OPM | File menu | Project Properties | Common Properties | General | Language).
* Siebel Connector – don't know what the impact would be.
OPA Dev team – Can you review what I've said here? And add any relevant further detail?
Cheers,
Jasmine

Size & Quality - Exporting Pix from iPhoto for Display and Printing?

I would like to export pictures from iPhoto for use in PowerPoint.
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Many thanks!

Luxesto
Welcome to the Apple user to user assistance forums
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
DPI is meaningless for a digital photo until you display it - Dots Per Inch are just a meaningless number - the displayed DPI is the size of the photo in dots (pixels) divided by the inches of the display measures in inches - the DPI setting in the photo means nothing - see The Myth of DPI for a longer discussion on this.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What's odd? you said export with the largest dimension 1024 - that occurred just as you specified - what would be odd would be that the export were different form your specification
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Higher quality means less compression (and therefore larger file size) - it does not mean a difference in compression - JPEGs have a compression from 1 to 12 available - iPhoto does 4 steps - small, medium, large and highest. I've not see the compression documented but I think of it as like 3, 6, 9 and 12
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Forget the DPI - just be sure the pixel sizes are correct - for printing you should have at least 150 dpi and 300 dpi is better - so at 150 DPI printing your 1024x768 photo can be printed at 6.8" x 5.12 " -- at 300 dpi it would only 3.4" x 2.55"
LN

Slides for CCMS and User Management

Hello,
Can anyone recommend some helpful (SAP-owned, standard) .ppt-Slides or pdf.-Slides for the following points:
<b>CCMS
User Management und Disaster Recovery Mechanismen </b>
Thank you very much!
Regards
A. Henke

Hi,
Take a look at service.sap.com/monitoring and service.sap.com/security
/Jesper

Hi I have purchaed 7500 T- Coins for tetris and every time i play i have no poer coins i don't understand why this keeps happening Please let me know if maybe im not doing something right otherwise i would like a refund as these T- coins are doingnothing

As i said i purchased 7500 T-coins for tetris and i run out of ower coin in seconds the T-coins seem to NOT be doing anything to help my game if that is the case i want to cancel my orders for a refund .Maybe i am using them wrong or they didnot kick in please let me know Thank You Laura

There is no configuration of a MBP that will satisfy the needs of all users. The variables are too many for the tasks that are required for the MBP to perform.
If cost is no object, the fastest CPU is a given as well as RAM. Needs for same may be few and not often if ever used, but certainly will do no harm,
Storage is an issue of a HDD with greater capacity compared with the speed offered by SSD with lesser capacity.
Size can be important. The convenience of portability of a 13" MBP with the larger and heavier 15" and 17' MBPs.
In the final analysis, you have to make these decisions.
Ciao.
(I'm not an expert)

I have attempted about five times to download the update for itunes and each time it tells me there was an error downloading to try again. Help:)

I have attempted to download the update for itunes and I keep getting an error. Suggestions???

Are you trying to RUN or SAVE the download?
Make sure to choose SAVE.
Also, are you current on all your windows update packages?
And what is your internet connection - is it wireless, or wired?

Regarding Fucntion module for Labor and Machine times

Dear all,
Is there any fucntion module to get the labor and machine times when we give in material and plant.
thanks
J

check the function
SCOV_TIME_DIFF
Import parameters               Value
IM_DATE1                        2008-01-01
IM_DATE2                        2008-01-01
IM_TIME1                        10:00:00
IM_TIME2                        11:30:00
Export parameters               Value
EX_DAYS                         0
EX_TIME                         01:30:00

What is Best Practice for Publishing and Subscribing to Multicast Video P2P

Please, could someone help with an issue I am having in developing a peer to peer video chatting application? My application uses multicast to publish and subscribe to video streams of NetGroup members. I'm listening for the NetGroup.Neighbor.Connect event, and I'm calling the following function:
protected function onPeerConnect(event:NetStatusEvent):void{
                var peerID:String = event.info.peerID;
                // create user vo here
                // user Value Object for incoming stream
                userVO = new User();
                userVO.peerID = peerID;
                netGroup.addNeighbor(peerID);
                receiveStream(userVO);
protected function receiveStream(userVO:User):void{
                // init netstream
                var stream:NetStream = new NetStream(nc,groupspec.groupspecWithAuthorizations());
                stream.receiveVideo(true);
                stream.addEventListener(NetStatusEvent.NET_STATUS,netStatus);
                // init panel
                // alter to use custom component instead
                var panel:Panel = new Panel();
                panel.id = "panel" + panel_seq;
                panel.title = "Panel" + panel_seq;
                panel.width=322;
                panel.height=281;
                panel.x = 50 * panel_seq + 200;
                panel.y = 25 * panel_seq + 200;
                var cpanelContent:Array = new Array();
                panel.controlBarContent=cpanelContent;
                panel.controlBarVisible=true;
                // init video
                var video:Video = new Video();
                video.width=320;
                video.height=240;
                video.attachNetStream(stream);
                stream.play("media");
                // init videoWrapper
                var videoWrapper:UIComponent = new UIComponent();
                videoWrapper.id = "wrapper" + panel_seq;
                videoWrapper.addChild(video);
                // add to display list
                addElement(panel);
                panel.addElement(videoWrapper);
                // drag and drop panel
                panel.addEventListener(MouseEvent.MOUSE_DOWN,function(event:MouseEvent):void{
                    panel.startDrag();
                    addElement(panel);
                panel.addEventListener(MouseEvent.MOUSE_UP,function(event:MouseEvent):void{
                    panel.stopDrag();
                panel_seq++;// used for unique panel id
                userVO.panel = panel;// reference to the panel
                userVO.stream = stream;
                userVO.video = video;
                peers.addItem(userVO);
I am confused on this:
var stream:NetStream = new NetStream(nc,groupspec.groupspecWithAuthorizations());
What should I pass as the second parameter to establish an incoming NetStream with the publishing peer? I've seen people put in the farID but I haven't figured out how to access it. What is the difference between event.info.peerID and event.info.neighbor? And since I'm multicasting to the group do I need to pass in the groupspec or the farID? I would love some clarification on this.
What is happening is this:
When I join the group, and there are two members in the group already, I'll get three panels with videos. However, duplicate video streams are being attached. When I inspect the peerStreams array I'm seeing a length of 0, so does that mean that no one is subscribing to my published netstream? If so, how do I specifically subscribe to each published stream in the group? Sometimes if I step through in debug mode, I get three separate camera feeds in their prospective panels, but if I run it will have duplicates. I thought at first that this was a referencing error because all of the NetGroup.Neighbor.Connect events where happening all at the same time and perhaps that is the reason for the duplicates?
My only other thought is that maybe I'm multicasting one guys stream to the whole group, but I'm getting varying results so I want to know what is the correct way to grab, in sequence, a NetGroup members' published netstream and be sure that all other members are subscribing to my NetStream as well?
Also, I am using Value Objects to keep track of who my group members are, is that data shared with the group or is it not accessible to all members?   or should I use another method of keeping track of my group members?
Please help! Thank you in advance!

it appears you posted an identical message in two threads. i've responded in the other thread:
http://forums.adobe.com/message/3701380#3701380

Slider for Display and Control Time of Video

Similar Messages

Maybe you are looking for