Slingbox AND Airplay with one express possible?

I two Airport Express units, one connected to my modem (WDS main) and a second connected to a Slingbox (via ethernet cable) and my stereo. I can get the Slingbox to work on my network, but not airplay (and vise versa). When the Slingbox is configured, I can "see" the Express in iTunes as a speaker choice but when I try to play to the stereo iTunes tells me that it cannot connect or find the stereo. By using the second Express as a bridge (is that correct lingo) am I somehow disabling airplay from the same Express?
Thanks!
Peter

HI,
I see you "reset" but if you didn't reset network settings.. do that.
Tap Settings / General / Reset / Reset Network Settings.
Then restart your iPad.Press and hold the Sleep/Wake button until the red slider appears. Slide your finger across the slider to turn off iPad. To turn iPad back on, press and hold the Sleep/Wake until the Apple logo appears.
Carolyn

Similar Messages

Accept all editions and changes with one click in a PDF document

In Adobe Acrobat (7.09) I see how to accept changes in a PDF document individually, but is is possible to accept all editions and changes with one click, as it is in Word for example. For tips thanks in advance.

Hi,
To save usernames/passwords, you may have to make sure that '''Remember passwords for sites''' is still enabled in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Security''' while at the same time in the '''Privacy''' tab, '''Never remember history''' or '''Always use Private Browsing''' shouldn't be enabled and if '''Settings''' is visible here, make sure that '''Saved Passwords''' is not enabled (ticked).
[https://support.mozilla.org/en-US/kb/Options%20window%20-%20Security%20panel?as=u Security panel]
[https://support.mozilla.org/en-US/kb/Options%20window%20-%20Privacy%20panel?as=u Privacy panel]

Cant click and drag with one finger, but works with 3 fingers

Last week, my trackpad starts to fail. Thing is that i can't click and drag with one finger but if i turn on the 3 finges option, i can tap and drag without a problem Check the prefs, universal access too. And everything is ok.
Reset pram, smc , run & fix permissions but nothing.
Looking around the internet i found a possible hint and is related to a bad battery condition. But that post talks a physical defective battery. Mine last like 2 hours.Under the battery icon in the finder it saids tha should be replace soon. Macbook pro late 2008. 4 gb ram , 500 gb hd, 10.7.3
Any suggestions??

It sounds like an accessibility feature, although I'm not 100% sure. You can explore the accessibility settings if you like, or for a quick fix you can try going into Settings>General>Reset>Reset All Settings.

Cannot use double tap and move with one finger to select text in Mountain Lion

I've been using OS X in my Macbook Pro since Snow Leopard, and if I choose "tap with one finger to click", I can use double tap and move with one finger to select text if the cursor is between text.
It works in Snow Leopard,and Lion However, in Mountain Lion, this doesn't work!! I have to click in the bottom right corner of my trackpad in order to select the text.
Can anyone get this fixed ?
Thanks.

Caolei,
I don't know if you'll ever see this, but thank you! I hope this helps somebody else down the line, too.
re. "I can use double tap and move with one finger to select text if the cursor is between text."
I've been trying to figure out how to select text with tapping and without clicking.
This did the trick.
It's quite finicky to not select a space in between words.
Zooming in does seem to help (two finger double tapping in a body of text may trigger a SmartZoom and zoom the current frame of text to fill the screen, if anybody doesn't know this.)
((There's a smartMagnifyWithEvent Cocoa NSEvent that's not universally supported across all applications for noob OS X developers like me.))
I haven't been able to find the part about double tapping between text to begin a selection (which seems to work best when double tapping directly next to a letter) anywhere in the help system on or online. I probably just missed it, though.
Clicking with the built-in trackpad on my MacBook Pro w/ Retina or Magic Mouse just takes too much pressure for an old-time touch typist like me.
As an aside, I've been trying BetterTouchTool and MagicPrefs to enable one finger tap on the Magic Mouse. BetterTouchTool seems to trigger text selection unwantedly and randomly, though.
The whole mystique of Mac / Apple being intuitive and user-friendly seems to be one of the greatest marketing coups / unbelievable con jobs of the last century.
I'm actually somewhat qualified to express an opinion as a software engineer with a degree in Computer Science and programming and user interface design experience in Windows, UNIX, web, Android and other systems, and now OS X and iOS. I could go on and on and on but I won't other to say that I still find Macs buggy and hard to use. I'm now finding that my new iPhone 5 is just as big of a pain (i.e. big thumbs missing landscape keyboard in Contacts.) Of course, I like flexibility and options and custom workflows and more than one way to do things and simply being able to do things at all, so I'm also actually somewhat biased. Sorry for the rant...
Cheers,
Hal

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

Can I access both platforms, window and mac with one cloud account

can I access both platforms, window and mac with one cloud account

Yes.
One Cloud membership = 2 software activations: Win/Win or Mac/Mac or Win/Mac.
http://www.adobe.com/au/products/creativecloud/faq.html
"Are there any unique benefits that come with my paid membership?
Yes, as a member of Creative Cloud, you get many benefits that you do not get when you purchase a traditional shrinkwrapped product:
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information."

How do you overlap PDF's and finish with one PDF file? Need help ASAP

how do you overlap PDF's and finish with one PDF file?
Need help ASAP

I'm not sure if you can do that with CreatePDF. Try it; you got one free use when you sign up with Acrobat.com
If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

Load both datastore and cube with one DTP

Was any one succesful in loading data to both datastore and cube with one single DTP .

You can only have one Target in a DTP.
HD

Expandable lists that expand and collapse with one click and edit in wysiwyg

I have a lot of text based lists on one page, so I threw them into content editor web parts so i can expand / minimize the lists. However, two clicks (one on the arrow and then one on "restore") is becoming really tiresome. How can I make expandable
lists that expand and collapse with one click? AND they are still editable from the wysiwyg browser editing tool?
I have already tried using Jquery to create expandable content, but the problem here is that the content can't be edited in the wysiwyg browser based editor - the expand or collapse button doesn't "work" when you are in the edit mode, so you can never
see the expandable content to edit. I can change the content in the code but it's no good if my non-coder co-workers can't also edit it.
I am in 2010.

I just found the answer myself here: blog (.) pathtosharepoint.com/2008/10/25/expandcollapse-buttons-for-your-web-parts/
Worked perfectly. Allows open and close of CEWP with one click, and you can still edit their content in the wysiwyg editor.

Choppy sound when using airplay with airport express

Hi everyone,
This is my first posting and I hope I can get some advice with the following situation:
Setting: a CISCO router with WIFI for my apartment, a mac mini, an iphone and an ipad all connected to the network. I also have an airport express that is attached to a set of speakers (the airport express is connected to the network as a client).
When I try to use airplay from ANY device and play music to my speakers connected to the airport express, I get choppy sound (volume goes up and down) and bad sound quality.
Any advice and how to go around the issue?
I've updated firmware but the issue doesn't seem to be that.
Best Regards,
Will

Hello WillMendoza,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215?viewlocale=nl_nl&locale=nl_nl
Ensure that other devices are not trying to stream to the same Apple TV at the same time.
Turn off Bluetooth on your iOS device by tapping Settings > Bluetooth.
Ensure that your Wi-Fi router is set up with the recommended settings for the best performance.
Certain external devices, such as microwave ovens and baby monitors, may interfere with a Wi-Fi network. Try moving or disabling these devices.
If possible, try to locate your Wi-Fi router in the same room as your iOS device and Apple TV.
If your wireless and wired networks are the same, try connecting your Apple TV to the router via Ethernet instead of Wi-Fi.
If the Wi-Fi router has an external antenna, check to see that is it connected properly and in good condition.
Use the Wi-Fi network troubleshooting guide to resolve interference and other issues.
Best of luck,
Mario

Tips needed for multiple iPods and users with one PC...

We are a family of four, with four iPods and one PC. We have two (Windows) user accounts set up. My husband and son share one, and my daughter and I use the other. My husband's and son's music does not show up in my user library and visa-versa. There are some songs that my husband has purchased that I would like on my iPod, but there are songs that my daughter has that I DON'T want on my iPod. Is there a way to set up 4 separate librarys that can choose to share (or not share) songs?
Windows XP

When the iPods belong to different people, there are basically two ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library and or user account or
b) Creating multiple user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page:
Loading songs onto iPod shuffle - Windows
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library:
Using multiple iTunes libraries -Windows
Separate User Accounts
Another option (which you've already tried) is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists

Delete photo's from organizer catalogue AND disk with one click?

Hi,
When deleting photo's from the organiser, PSE asks if i only want te remove the file from the organizer catalogue, or as well from the disk. In fact, i always want to do that. Now, it takes 2 clicks to confirm to delete a photo, which is time-consuming.
is it possible to delete photo's from the organiser as well from the harddisk with one click? (or, just by clicking 'delete'.)

fatmax3m wrote:
Well, thats your opinion. IMHO, it's truly crappy. When sorting out photographs, en wanting to delete a hundred, it's really not convenient having to do all those extra clicks.
I think Adobe should offer some tweaking features, for questions like this...
But, thanx for the answer.
If your main issue is to delete rapidly hundreds of files from disk, there are better ways in the Organizer. Did you notice that deleting a single file from catalog and disk is slow ? Even deleting a dozen of selected files from disk (a single additional click) is slow. So, the best choice is to work in two steps. The first one is to select all the files to be deleted (a hundred, a thousand...) and mark them in some way : using the 'hide' feature, assigning a 'tobedeleted' tag (immediate even for dozens of selected files); then with all the files selected, delete from disk (and go drink a coffee...).
I won't discuss the obvious question that those last methods let you check all possible deletions before committing the undoable choice

Printing pages and links with one click

Is it possible to print a multiple page pdf document as well as any imbedded links in that document - with one click?

Hi Sunnihval,
No there isn't any option to print the mails as well as attachment with one go.
You have to manually open the attachment and print.
Regards,
Rave

Connecting Interface and recoding with Logic Express 9

Hi apologies if I've posted this in the wrong location. I need some help.
I have just bought an iMac (with Logic express 9) along with a focusrite saffire pro 14 sound interface.
i'm having difficulties getting a line in and out of the focusrite and into logic.
I currently have passive monitors plugged into an amp, which is then plugged into the headphone jack on the iMac, the focusrite is connected via firewire.
my mic is connected via xlr with phantom power into the focusrite, and my guitar (via an effect unit with built in pre-amp) is connected into the 1/4'' input. both signals are showing levels on the focusrite mixer software - but no sound. the only output from the sound interface is the firewire.
I can record, and play back in logic using my usb midi controller- USB direct into the iMac.
i've selected the focusrite as the driver in logic, also as the input device in system preferences on the iMac.
any ideas when I am doing wrong?
any help would be good
thanks
Chris

Hi,
there are some points where the big bear trap might have snapped onto your feet
First: You said you have selected the focusrite as the core audio input device in Logic. This is okay. But have you selected the correct inputs for the audio tracks you are recording to? You focusrite has 4 possible line inputs (1 and 2 are combined on the front in the middle of the XLR jacks, which are also inputs 1 and 2 for mics, and 3 and 4 are on the back).
When you connect a headphone to your focusrite, can you hear your mic or your guitar? (turn up the monitor volume as well as the headphones volume!)
Given you really have a good signal that goes into your focusrite, the same signal should be available in Logic *for the appropriate inputs* . It won't work if you have plugged your guitar into input 3 and have input 1 or 2 selected in the channelstrip's input selector tab.
Second: Given there's a signal coming into Logic, where does it go from there? The focusrite has 4 outputs, and you should connect your amp&speakers to them. If your amp&speakers are still connected to your iMac's headphone jack, you must select your Mac's "built in output" as the output device in Logic. The OS X preference pane has nothing to do with Logic's preferences. Don't confuse them.
Cheers,
Fox

Multiple ipads and Iphone with one apple ID.

My wife and I share a apple ID for our iPads. She just got the IPhone 4s. We don't want to share contact. Just apps and music. Can we still access the same music off itunes? Any suggestions?

How to use multiple iPods, iPads, or iPhones with one computer

Slingbox AND Airplay with one express possible?

Similar Messages

Maybe you are looking for