Slip and slide tools don't display the four reference frames

According to the help page, "when you use the Slip or Slide tool, the Program Monitor displays the four frames involved in the edit side by side, except when editing audio only". On my machine, when I use the slip or slide tool, the program monitor continues to display the same clip; it does not divide itself up into the handy four reference frames at all. The tool still seems to work, doing its thing on the timeline, but it's useless without the four frames.
Anyone have any idea how I screwed this up, I have searched everywhere in the preferences etc, and also here and on google, but can't for the life of me figure out why it is doing this to me.
In the image below, I have the slide tool activated, and am dragging a clip, but the monitor window on the top right remains stubbornly singular.

Well I solved it myself. I will note it here so others in the same situation will find the solution.
I had installed the MainConcept Mpeg Pro plugin suite (v.5) soon after installing Premiere; Mainconcept apparently (and inexplicably) does not support this feature in the playback/monitor window. Which renders these tools useless when the Mainconcept playback is active. Very strange omission on Mainconcept's part.
To fix it go to:
Project>Project Settings>General
At the bottom of the window that pops up is a drop-down menu entitled "Video Rendering and Playback"; mine was set to playback with the Mainconcept Renderer; I switched it to Mercury Engine Playback and now the reference frames pop up as they should with Slip, Slide and other tools.
Problem solved!

Similar Messages

  • Slip/slide tools don't show the 2 screens in the pgm monitor... :(

    i only see the TC changes in the pgm window whenever i'm trying to slip edit on a clip, but there's no video showing...
    if i want to use the slip on a clip - i have to wonder around it to get to the right desired new TC... it's like working blind
    so why does that happen? and what can i do in order to bring it back to normal and show them to me?
    i've tried reseting the software and the the computer but nothing works...
    anyone have any ideas?
    thanx,
    Ori.

    thanks for your Reply Dennis, but unfortunately i can't find neither the File>New>Transparent nor the Video Effects>Video>Timecode commands.
    it looks to me like there is something more in the roots of the software, cause i used to work with it normally till my old HDD crashed, and now i installed it again but can't see the double monitor inside my pgm screen (in any mode, including the single/dual/trim)...
    i looked for it in the preferences/settings but coudln't find anything. and i anyway thought that it's the basic so there shouldn't be a toggle on/off for that option... right?
    Ori.

  • EM don´t display the instances(infrastructure and midtier)

    Hi OTN Forum,
    I have installed a box Linux RH AS with Oracle9iAS R2 infrastructure and midtier in the same box.
    When I log in into EM with the user ias_admin the page don´t display the instances.
    Any idea about this issue?
    Thanks folks!
    Regards,
    Wilson

    The development module displays images in ProPhoto RGB colour space, the library module (I assume that's Bibliothèque) displays images in Adobe RGB colour space. 
    If there's a difference, then one possibility is a colour management problem (faulty monitor profile).  This could affect monochrome images, as it includes the tone curve.  Is the monitor calibrated and profiled with a hardware tool (Spyder, Colormunki or similar)?  If so, try recalibrating.  If not, then see what default profile is set for the monitor.  Control Panel (don't know what that is in French) -> Color Management.  If nothing is set, you could try setting the default profile as sRGB (probably called "sRGB IEC61966-2.1").  If sRGB isn't shown, click Add...  Does that make the two modules the same?  It might make the picture worse, but if makes then the same, then you know it's a monitor profile problem.  Try using Windows calibration (Colour management, Advanced tab), but better is to use a hardware tool. 
    Another problem could be that the Lightrroom previews are corrupt.  Develop module renders each image as it's displayed, Library module renders the images to a jpeg preview, and stores the preview.  The preview is rebuilt only when the Library module thinks the image has changed.  So you could change the image in Develop, and see if the image then chagnes in Library module.  If it doesn't change, something serious is wrong (protection issue on previews folder?  Faulty Lightroom installation?).  If it changes, but it's still different between Library and Develop, I'd suspect a colour management (monitor profile) problem. 

  • Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

    Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
    We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
    But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
    We are looking for some information what we can do to solve this problem. Could you help?

    Can you play the video on YouTube?
    *http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
    Note that Mac lacks support to play MP4 files natively without using a Flash player.

  • Problems with "Background Eraser Tool" and "Blur". The tools don't affect the whole area but just connect the start and the last points.

    Hello!
    I have some issues with Photoshop CC 2014. The tools "Background Eraser Tool" and "Blur" won't work correctly. When I’m holding down the left mouse button and trying to erase or blur some area, the tools don’t affect the whole area but just connect the start and the last points – like drawing a line. These troubles exist with mentioned tools only, other tools work correctly.
    I’ve restored each tool separately, restored all the tools together, installed new drivers for tablet, re-installed Photoshop and even Windows. Nothing helped. These tools worked correctly earlier with the same adjustments, but one day something went wrong.
    How can I make the tools work correctly?
    Some information about my computer:
    • Notebook Lenovo Y560
    • Windows 7 Home Basic SP1 x64
    • Intel Core i5 2.53 GHz
    • 4Gb RAM
    • ATI Mobility Radeon HD 5730 1Gb
    • Tablet Wacom Bamboo CTL-470

    Hi,
    I have a similar problem with the Background Eraser tool as well. It's the same both on my PC and on my laptop, both running Win 8.1 and PS CC2014. Would be great to have a solution for this. Did you managed to find a fix?

  • TS4006 Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?

    Can get my iPad to locate iPhone but can't seem to get cloud app on my iPad. My phone and iPad don't display the iPad in the device corner?

    You went from the wrong direction.  Start with Nikon website and the WU-1a adapter.  click on the download at the App store....
    http://www.nikonusa.com/en/Nikon-Products/Product/Wireless/27081/WU-1a-Wireless- Mobile-Adapter.html
    It will take you to the App.

  • Some PDF files and other emails do not display the whole page. Is there a way to change that?

    Some PDF files and other emails do not display the whole page. Is there a way to change that?

    If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
    Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • CS5 - Standard Screen Mode - Hand Tool don't move the document

    Hi all
    In PS CS5 -> Standard Screen Mode -> Hand Tool don't move the document unless you zoom the document so it became bigger than the working area!
    Is it possible to use the hand tool (move the document arround) while the document is smaller than the working area?
    Thanks

    Why not just shrink the window border and move the Window around to where you want it, as has been described above several times?
    because that will make the working area much smaller. You'll be able to move the Window around, but if you zoom in, you will lose working area and you'll have to use the scrolls.
    Maybe it would help to describe WHY you want to move the image within the window/tab?
    There are many reasons for that and I don't have the time to describe all of them right now. I'll give you just one: if you paste an object that is bigger than the document size and you want to transform the object (scale down for example) - you press Ctrl+T and the top, bottom and middle right points are no visible (they are outside the area). Then you have 2 options if you want to scale down:
    1) scale the image with the left side point, and then move the image back to the document
    2) zoom in the document -> so it became bigger than the working area -> so you can move it with the Hand tool (spacebar) -> so you can see the right points -> so you can transform the object -> and then you zoom out again
    both ways are just very slow
    if you can move the document inside the working area (inside the window) then you can perform the task much quicker:
    move it with the Hand tool (spacebar) -> grab some of the right point and transform as simple as that. And you still can see all of your document, and you can still reach the right points
    this is just one example, I can tell you more

  • Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    Hello there - I am sharing an iPhoto library across two accounts on the same computer - it works fine EXCEPT for Quicktime movies - they play on one account and claim I don't have the rights on the other - all permissions are on and ok?

    It should be in the Users/ Shared folder.
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Note the option to check and repair Library Permissions
    Regards
    TD

  • As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

    As a graphic designer, I am creating ePubs that will be seen on iPads running, ios5, ios6 and ios7.  Each version displays the page differently.  Is there a way to make the display consistent on all systems?

  • I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    I downloaded the new OSX mavericks in my macbook and why I don't have the new i-life and iWork

    Have you checked the Software update page at the App Store?
    And do you have iLife '11 and iWorks '09 installed? Only these versions are eligible to be updated to the new versions.

  • I use aperture 3 since a long time. Using slit viewer, now the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How ca

    I use aperture 3 since a long time. Using slit viewer, noe the bigger image become bigger then the given space and shifted to the right, so that I can't see the complete picture anymore. And I also don't see the last few picture in the strip below. How can I splve this problem?

    This lloks like your preferences file might have become corrupted.
    you probably have a problem with corrupted user preferences.
    Remove the Preferences: Remove the Aperture's user preferences from the User Library as described here:
    Aperture 3: Troubleshooting Basics   http://support.apple.com/kb/HT3805
    Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
    Quit Aperture, if it is running. Log off and on again.
    Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
    In the widow that will open, scroll down to "Preferences"
    From the "Preferences" folder  remove "com.apple.Aperture.plist".
    Then try to launch Aperture again.
    But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
    Regards
    Léonie

  • My macbook is five years old and has become slow. often displays the whirling kaleidoscope. can anyone please give me advice on what to do?

    My macbook is five years old and has become slow. often displays the whirling kaleidoscope. can anyone please give me advice on what to do?

    Quite often the HDD is the source of the problems.  Look at this comprehensive guide for possible solutions:
    https://discussions.apple.com/docs/DOC-3521
    Ciao.

  • I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iPhone without iTunes an now i don't wad then it turned itf off and now its stuck on the black screen with the loading sign. So please how can i turn my phone on again

    I jailbreaked my iPhone 5 and now i don't want the jailbreak any more so i restored the iphone without iTunes and then it turned it self off and now its stuck on the black screen with the loading sign. So please how can i turn my iPhone on again?

    I figured it out by pressing the home button and the off button but when i turn my phone on again it's not restored. And when i try to restore it with iTunes it has to update but i can't update my phone because it's jailbreaked but if i can't update it, it won't restore the phone.

  • I'm doing a vector, however the pen and Elipse tools don't work as they should.

    As I said, I'm working on a vector, but now whenever I use the pen or elipse tool, the shape doesn't fill in, even at 100% opacity. Changing to other tools I get a message that always ends with "Because the pixels in a group cannot be edited without merging the group."
    I'm left scratching my head, I only started using photoshop a few days ago and would prefer not to merge the groups together.
    I'm using CS2 if that helps at all.
    Any help would be appreciated.

    Albatross01 wrote:
    I feel like a fool for not looking closer
    Making fools of us is just a Photoshop side effect I don't believe Adobe programmers do it purposely they just can't seem to get thing right so the keep changing and breaking Photoshop. Photoshop culture take some time to become accustom too.

Maybe you are looking for

  • Apple TV is not recognizing my apple ID and password. Why?

    Fr some reason one day my Apple TV stopped letting me mirror from my ipad. I checked and it had re set itself. Now it will not recognize my apple ID or password. I have tried several times but it is now useless to me. I can't do anything with Apple T

  • When can we expect a patch for Object Array List Data Provider?

    Hey JSC Team! When can we expect maybe, just maybe a minor patch for the Object Array List Data Provider loading class problem? Next Month? This Year? Next Year? Near Future? Long in the future? Sometime in the 22nd century?

  • Change Slider Effect in Dreamweaver

    Hi,       I am working on the tutorials provided by Timothy Framework / Web Design Services. The tutorial deals with building a website called the "Manchester Project". The link is - www.manchestertemplate.info/ There is a slider on the main page tha

  • ActiveX error - treeview control

    Has anyone solved the problem with WIN XP SP2? The error ("Server exception") happens in the second line    AcXTree.ClassID = "MScomctllib.TreeCtrl.2"    oTreeView = AcXTree.Object It works well with any other WIN OS Thanks in advance, Dario

  • Deploying Acrobat DC with Creative Cloud Packager

    How are you guys deploying Acrobat DC with the Creative Cloud Packager? In this Adobe's article for the CC Packager, it says, "For Acrobat DC, Exception Deployer Application is not required. For Acrobat DC, you only need to run the setup.exe ... you