Slow connection between two Macs in LAN

Why does it take so long to connect one Mac to another Mac's public folder on LAN?
Mac mini 2.4 GHz (the latest model with 4 GB RAM) is connected to LAN with 100 Mbps LAN cable;
MacBook Pro 17" 2.33 GHz (2 GB RAM) is connected to LAN with AirPort 802.11 (G) via Linksys router WRT54GC.
Both computers are in the same room, Linksys WiFi router is 6-7 meters away, excellent signal strength. It takes about 50-55 seconds while MacBook Pro connects to the Mac mini. Why so long??? Do they use 2kbps connection speed? I thought with these network speeds (54Mbps for WiFi, 100Mbps for LAN) it should be almost instantenious…
Both Macs run 10.6.4.

I'm having the very same problem, but only when connecting to one of the 3 Macs on my network. it eventually connects, but only after about 55 seconds. Connecting to the other 2 Macs is almost instant, so it leads me to believe that there is something wrong in the setup of the "problematic" Mac. This slow connection happens using either "Back to My Mac" or just trying to connect via Finder. Any ideas would be very welcome!

Similar Messages

Connection between two Macs fails

My home-network consists of a MacPro (1,1 - 2006), a MacBook Pro (Early 2008) an a MacMini (late 2009), all running OS X 10.6.3, no software-firewall is running. My router is a LinkSys WRT 610 N which I use with ethernet (Mac Pro) and wireless (Book an Mini). Wireless is both, 2,4- and 5,0 Ghz (802.11n).
When I try to connect from the MacPro to the MacBook Pro via wireless, sometimes it works, sometimes it doesn't. The reverse connection works (Book to Pro). Sharing is enabled on every Mac, also screen sharing. If I connect the MacBook Pro via ethernetcable, it works. What could this be? Also I often cannot connect via the symbol in the sidebar of the finder, I have to use the "go to" - menu. If I want to make screen sharing I have to use "go to > vnc ...". Does anybody know these issues and can give me a hint? By the way, the connection between the two "younger" Macs (mini and book) works fine ...
Message was edited by: Stefan Gregor

Stefan Gregor wrote:
What could this be?
_*wireless interference*_ ?
download iStumbler (free) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
any improvement ?
JGG

Wireless connection between two macs.

I have a Intel iMac downstairs and a G4 power pc iMac upstairs. The downstairs iMac has an internet connection, upstairs does not. What do i need to have a wireless connection between the two and how do i go about connecting the two computers?

Hi widge-
What you need will depend on which Macs are already wireless and which you will have to add.
There is a lot more information available here: AirPort + Time Capsule
Luck-
-DP

Remote connection between two macs.

I'm trying to set up a remote connection between my iMac and my MacBook so I can share them over the network. On the MacBook's Terminal I'm entering the following command: "ssh username@hostname" witch is supposed to let me remotely login into my iMac, after a few seconds the command line prompt me with this message: "connect to host 1.2.3.4 port 22: Operation timed out". What am I missing?

This forum is for troubleshooting Apple Remote Desktop, Apple's application for managing networked Macs. You should post your question in the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=1222

Using Airport Express to create a connection between two Macs

We have two G5s in the office, one of them has built-in Airport and the PowerMac doesn't. We have Airport Express but we aren't sure whether it can be used as hardware to allow the non-built-in-Airport G5 to HAVE wireless access to the other Mac's files and so forth...
In other words functioning as a server connection or a network between the two.
The Airport Express didn't come with a USB cable, thus my suspicions.. Is this meant to be used solely with Macs with built-in Airport?
Many thanks,
Anne

The USB port on the AirPort Express (AX) is ONLY for a single compatible USB printer.
The AX can be used to allow a non-wireless computer connect to a wireless network (via it's Ethernet port) ONLY if the AX is configured to use WDS to connect to the wireless network. If the wireless network is created by another AX or an AirPort Extreme base station (AEBS), using WDS is possible.
Be aware that each WDS link cuts your available bandwidth in half.

Sharing internet connection between two Macs

I would like to enable my wife's new MacBook to share an internet connection ( wirelessly ) with my iMac G5. Both machines run OSX 10.4.8 and both have Airport cards installed as standard. I have a DSL broadband connection via a USB modem on my iMac. From what I've read this is reasonably straightforward and doesn't require any extra kit, ie create an Airport network and set the appropriate Sharing preferences etc.Is it as simple in practice? Has anyone got a similar setup working? Is there a step by step guide to achieving this?
Would greatly appreciate any help.
G5 Mac OS X (10.4.8)

Hi,
I seem to have 'solved' the problem by turning off the firewall on my G5. Entourage is on my wife's laptop. However, I originally had the Personal File Sharing and Personal Web Sharing boxes allowed with the rest of the firewall on and this enabled my wife to access the web but not Entourage. It was only when I turned the firewall off completely that she was able to use Entourage OK. Is there another box that I should check that would let her use Entourage without me keeping the whole of the firewall off ( its not obvious which one to set )?
Thanks again.
G5 Mac OS X (10.4.7)

I just bought a new iMac and now I am trying to use it as a screen for my Macbook pro, but it don't have a Mini DisplayPort the new model only have Thunderbolt which my Macbook don't have. Is there any way to connect this two mac's anyway??

I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??

Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables.

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

How to transfer files between two Macs via Firewire cable?

I heard you can transfer selected files between two Macs running Tiger. I'm not talking about setting up a new Mac w. files from an older one, if that's different? Can someone enlighten me on this or point me to a "how-to" link? Thanks.

Yes, you pretty much just drag and drop or copy and paste depending on which way you like better. It is pretty much like connecting an external hard drive. Just find the files you want and copy them over to your other computer.
This is one of my favorite features from Macs. It's very simple to do and because it's Firewire even large files transfer over very quickly.

How to share documents between two macs,

I NEED TO SHARE documents between two macs....keynote dcts.....and I always want to be working with the last dct, what is the esiest and safer way to do it ?

Ok I have three macs sharing mobile me. One at work that´s a imac,at home my old Mack book Pro with a big monitor and now I got a beautiful Mac Book Air.
The two computers at home can be connected wireless,I have a time capsule disk that at this moment is only backing up my MBPro. I will use my MBA for everyday use,mails,navigating and for lecturing....with keynote. Basically the documents that I need to share daily will be keynote dcts. And may be some apperture projects.
All the mails calendars etc work beautiful with mobileme.
I don´t really need to conect the imac at work.
Any ideas to make things easy?
If I work only wit dcts does are about 400 KB. If I use my folder of preentations is about 42 GB, I think I just need to work with dcts....

Sharing external FireWire drive between two Mac Pros

I know that sharing an external FireWire drive between two machines (i.e. both connected at the same time) is a very bad things as both will assume that they have exclusive write access to the drive and quite quickly write over what the other machine has just written.
Would it be possible though to mount the drive as read-only on the first machine and in read-write mode on the second? Would this preserve integrity as the second machine would in fact have exclusive write access or would other problems arise?
Thanks for any responses to a stupid question!
Peter

Mmm, Connect the drive to the private secure network Mac. Connect the two Macs by FireWire and create a network over the firewire connection, configure it to use class C addresses, ie. 169.x.x.x manually and then share the firewire drive to the other Mac (also on a class C network address over firewire).
Both macs will still have their own ethernet network addresses and each network will not be visible from the "other" network (unless you choose to share your internet connection over firewire).
The only caveat here is that the firewire drive will be visible to every other Mac on the secure network that you allow to connect to it (which is why I chose that one, rather than the public Mac). Or can you restrict sharing to only one network ..... didn't think so.

Using A FireWire cable between two Macs and Migration Assistance to transfer all my desktop to my macbook laptop, will all my apps, bookmarks, contacts and files be transferred? I am trying to make a complete copy of my desktop to my laptop.

Using a FireWire cable between two Macs and the Migration Assistance feature, will al my apps, bookmarks, contacts and files be tranferred?

See Pondini's Setup New Mac guide

How do I share files between two Macs on my wireless network?

I have an iMac G4 and an ibook G3 on a wireless network. I have "file sharing" activated on both computers. (Also Appletalk, which may or may not be a misguided move, but I got the idea from OSX "Help.")
When I try to get from either computer onto the other, my computer is recognized by name (another alternative is to log on as a "guest"). I'm prompted for a password. None of the passwords I use works. I've tried the administrative passwords for both computers.
How do I get beyond this hurdle to share files? I've posted elsewhere to no avail. This must be an easy one. How do you share files between two macs on one network?

Do your accounts on the machines have the same short name? It's an issue I've seen a few names.. one machine with bsmith, the other with bobsmith, but the long names for both being "Bob Smith". The login windows would confuse users because it showed their names, but because the short names didn't match, it wouldn't work.
The password you should use is the administrative one, so I don't know why you're not having luck.

Communication between two Macs Server

Communication between two Macs Server:
Can they work together and communicate and interact normally in a PowerMac network, OS X 10.5.8 Server installed, and a MacPro computer that is running Server 4.0.3 on Yosemite? Had to do some additional implementation?
Regards

from the JavaDocs:
http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/ServletContext.html
getContext
public ServletContext getContext(java.lang.String uripath)
Returns a ServletContext object that corresponds to a specified URL on the server.
This method allows servlets to gain access to the context for various parts of the server, and as needed obtain RequestDispatcher objects from the context. The given path must be begin with "/", is interpreted relative to the server's document root and is matched against the context roots of other web applications hosted on this container.
In a security conscious environment, the servlet container may return null for a given URL.
Parameters:
uripath - a String specifying the context path of another web application in the container.
Returns:
the ServletContext object that corresponds to the named URL, or null if either none exists or the container wishes to restrict this access.
See Also:
RequestDispatcher

How to make a connection between two wireless sensor networks of different groups through gateway?did any external device or coding is needed?

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

my objective is to make a connection between two wireless sensor networks....i am using two nodes and one gateway for each wireless sensor network.....what is the procedure for connecting these two wireless sensor networks of different groups

Slow connection between two Macs in LAN

Similar Messages

Maybe you are looking for