Slow down of Transfer to Apple TV

Does anybody have a problem after the update for the airport router to transfer video and music to the apple Tv? It seems that it becoming really slow and I can't figure it out. I have gone to the network and really doesn't show anything wrong.
Thanks

if your TV connects to your network wirelessly, try running an ethernet cable from the router to it.
also, check for _*wireless interference*_.
download iStumbler (does not work on 10.6) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel(s) of your network as far away as possible from those.
any improvement ?

Similar Messages

I want to slow down my Apple TV...

Hi,
I want to slow down data going into my Apple TV...
Basically when one of the family uses Netflix or another source on the Apple TV, it is taking too much of the bandwidth available to the household. Living in a rural part of the UK we can get around 4Mb/s, and eeking it out amonst a big family is a real issue. Fibre is still a dream despite all the rhetoric spoken by BT and others.
Anyhow, I wondered whether our router could allow me to configure the Apple TV's IP address to have a maximum value. (Some routers do). Unfortunately oursis the basic ISP supplied jobee, and it will not allow this.
So, here's the reason for writing, and I wondered whether I could but a cap around 800Mb/s on data on the Apple TV unit. It currently is also using Wifi if that helps.
Any suggestions or configurations gratefuilly accepted.

Without knowing what make and model of router you have its impossible to know whether ti would allow it or not.
Your other option is too buy a router that will allow it, and daisy chain it to the ISPs modem. Then control the entire network through the new router.

Sudden slow down in data transfer

I'm reading data from the hard disk on a Target PXI System (8106 RT) and sending it via Ethernet to a Host PC and writing it to its hard disk. I read a chuck of data from the Target, send it using TCP Write function. The Host uses the TCP Read function get the data and write it to its hard disk. Data is being transfer over a Gbit Ethernet. A total of 9 files ranging in size from 700 MB - 2 GB are being transferred. The process moves along at an adequate speed until it suddenly slows down to slower than a snail's pace in the middle of a file.
By using probes (see enclosures) I've been able to determine it take approximately 17 seconds between when the data is read on the PXI to when it is written on the Host. However, an iteration of the loop on the Target has increased to over 3 minutes. The CPU usage on the Target and Host are minimal, less than 1%. Memory usage on the Host is also small. Any suggestions on how to diagnose what has caused this sudden slow down?
Attachments:
Slide1.PNG ‏104 KB
Slide2.PNG ‏124 KB
Slide3.PNG ‏39 KB

I would recommend using smaller chunk sizes for your data transfers. I would recommend something inthe 10K to 50K range. I have done quite a bit of profiling for sending large amounts of data and I have found that it is better to send lots of smaller chunks rather than fewer large chunks. Also make sure that you are not automatically building up large buffers in your application if you are using shift registers. If you are reading from a file read the file in chunks and send the chuncks. Don't read the whole file in in one read. One experiment I ran resulted in a single read of a large file (2 MB or so) took something like 10 minutes to read it in one read. However it only took a couple of 100 ms to read the whole thing in 10K chunks. Same applies to wrinting very large chunks using the TCP write. You can easily get a timeout if you write 1 MB as a single write because the receiver has not consumed all of the data within the timeout period. However, multiple small writes will reset the timeout for each chunk written.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

IPad 2 has slowed down copy paste is not working it hangs when filling in user name , please do something to solve all these problems ,Apple please wake up

IiPad 2 has slowed down with ios8 copy paste is not working it hangs when you try to fill up forms ,Apple engineers you need to do something fast

Apple engineers do not participate here. Have you updated to iOS 8.1 which was just release yesterday? Have you done any other troubleshooting? If you haven't start here.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

I have noticed iOS6 slow down browser and email client, I really hope Apple will find solution for this. Junaid

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

[Solved]Computer slow down and freeze during data transfer syncing

Hello,
Everytime I make a data transfer, my computer slow down, and sometimes freeze during a few seconds, work for a fraction of seconds and freeze again. I don"t understand why.
As an example, here is a bench of files i transfered during a syncing with Grsync
It took about 12h to sync 64Gb.
I've read a lot of topics talking about this problem but nothing works. I tried to switch off the SWAP and setting the vm.dirty_ratio and vm.background_dirty_ratio but nothing works.
I'm making the trasfer between two Western Digital USB 2.0 external hard drive in NTFS.
Does anyone know how to fix this?
Thanks in advance
Last edited by Neldar (2015-03-04 15:54:29)

It seems it was beacause one of my external hard drive was about to die. I performed the same operation with 2 Western Digital external hard drive 1To USB3 and it works perfectly.

Brand new macbook pro slows down after I transfer files on from old computer

Hey, I just purchased a brand new Macbook Pro 3.5 GhZ Haswell processor, 500 gb of flash memory, 16 gb of RAM, OS X Mavericks, 17" retina display and while it's been great upon first booting up after I transferred over my music and books and docs from my old mac (about 150 gb worth (so I still have over 300 gb free on the new one)) I've seen a massive slow down and it's started giving me the beach ball of death which was the main reason I got a new macbook as my old one was beach balling so much it was nearly unusable. Very upset that this brand new stupidly expensive computer is already doing this. Any advice is apppreciated.

Either your RAM is no good, of poor quality, the wrong specs or it's not installed correctly or it got subjected to static electricity when you put it in.
Best Buy isn't as Mac centric, thus the quality of RAM that Mac's require may not be there.
You should have purchased from Crucial.com or Other World Computing or similar that tests the RAM to make sure it works the first time you put it in, as it costs everyone money to ship bad RAM back and forth.
I put in 16GB a couple of days ago, took five minutes and it works perfectly.
Nothing like top tier RAM for a top of the line machine, especially with all those tiny, easy to lose screws Apple uses.

My iMac has slowed down considerably soon after my Apple Care expired. Reminds me of the PC days.

What can I do about my iMac slowing down. Shortly after my Apple Care ran out it started to slow considerably. Kind of like having a PC again. On a PC I would defrag it, but Apple tells me it is not recommended for the iMac. Tired of watching the multi-colored circle spin. What can be done? I just upgraded to Lion. The problem seems a bit worse since. AND I can no longer get my iMac to back up with Time Machine. What gives?

Try using disk utility on your hard drive to repair it, also repair your permissions. Open activity monitor and take a look at your RAM and CPU usage. You may have a program or tow taking up a lot of your resources.

Since upgrading to OS 8.0.2 my ipad2 freezes, slows down, safari takes forever to open, the celluar network goes to No Service and the only way to fix it is to reboot it and this takes longer than before. Has Microsoft taken over Apple software?

SInce upgrading to OS 8.0.2 my ipad 2 freezes, slows down, safari takes forever to open pages, cellular network goes to No Service requiring a reboot (and this takes longer than before), in summary, I now have a fancy paperweight, i used to love my ipad. I feel as if Microsoft has taken charge of the Apple Software Division.

Sorry if someone sees this post in a different thread; Just want to get some additional exposure.. Who knows, maybe someone from Apple will take note..
The glitchy, unresponsive, slow and outright crashes are something you would expect in a less superior product. I paid what I consider a premium because of the perceived integrity of the company and quality of their products. I am not going to go as far to say Apple ***** and so do their products; but they have to to a better job of acknowledging problems and providing recourse. Right now, it "feels" like they don't care about existing customers. I am not sure of the exact #'s, but I believe products like the Ipad2 represent a significant population of their existing Ipad product base.
So what is my specific rant; If Apple is going to take a long time, or worst, NOT fix the problems introduced in IOS 8 for IPAD 2, give us the option of going back to IOS 7. I would say most everyone was extremely happy with their product running under that OS and would migrate back in a heartbeat. By blocking this option, it feels like Apple is saying that the only recourse is to live with crappy performance, wait forever without any real news, or throw away your Ipad 2 and buy a newer model. Right now this is 100% completely unacceptable, and I, as will thousands of others, will watch how this unfolds when we do buy new products. Most technology products only have short, finite lifespan and I would think it is at very least very important to Apple to retain customer base in a highly competitive marketplace. I'm done...

HT1338 My imac OSX version (10.6.8) has slowed down tremendously, what can be done clean it up? Should I bring in to an apple store for am evaluation? I think my comoputer is laden with virus.

Mu IMac pc haa slowed down so much . It takes so long to open up all of my files. Should I take it in to an Apple store? Do the stores staff who can repair computers that are contamiinaed from virus? I tried PCmatic.com but their progam is not meant for imacs. I can/t open up the download.
Is there another online stie that cvan help me?
Thanks!
AC

Not enough free space on the startup disk can slow the system down.
Control click the MacintoshHD icon on your desktop then click Get Info.
In the Get Info panel you'll see: Capacity & Available
Make sure there's at least 15% free disk space.
Mac troubleshooting: What to do when your computer is too slow | Macworld
It's not necessary to repost your topic at this point.

Apple mac slowing down

OS X version 10.8.2 is becoming slow
specialy too booth , too shut down and to open iphotos
any suugestions how to make it fast ?

This probably has more to do with hardware (processor, RAM, SATA v. SSD) than software (OSX).
To make the most dramatic difference in speed, you might consider replacing your hard-drive with a solid state drive (http://eshop.macsales.com/shop/internal_storage/Mercury_Extreme_SSD_Sandforce/So lid_State_Pro). This costs between $75-$400 (depending on storage capacity)
To make a moderate difference in speed, you might consider replacing your RAM chips with larger capacity chips (http://www.crucial.com/mac/). This costs between $25 and $75 (depending upon your computer and on storage capacity).
Other things to think about:
(1) Is your hard-drive almost full. This can cause CPU to slow down?
(2) How old is your machine. After a couple years, SATA hard-drives (the ones with the spinning disk) begin to slow down (e.g. a 5400rpm drive might max out at only 3500rpm or 4000rpm after while).
Finally, a visit to the Apple Store never hurts. You can always make a reservation at www.apple.com/retail. A Genius will be happy to run diagnostics on your machine and give you some suggestions for improving your Macs performance.
Best!

System has slowed down considerably after updates from Apple. Is SyncServer the culprit?

I use MacBook with preinstalled OS Leopard since April 2009. I have also regulalry updated my computer system using the Software Update application. However, since my last update on 12th Aug 2011, I have noticed that my system has slowed down. There is long pause between every character I type, delay in switching applications, battery dries out quicker, slow response to every command.
I have started facing this problem after updating following software like iTunes 10.4, Safari 5.0.6, Migration Assistant Update for MAC OS Leopard & Quick Time 7.7 from Software Updater. Although, my OS is still leopard.
I noticed on the Activity Monitor that syncserver is using majority of my RAM and reappers even if I stop the process. Some of its subprocess like AddressBookSync also appears and consumes lot of memory. Is this the problem? Though, I never noticed earlier what size it consumed.
I use Microsoft Office suite for Mac and have also checked and deselected all sync services. Yet, the Process (PID 305) continues to appear in Activity Monitor.
I am no techie, and would appreciate quick help to resolve this issue.
Thanks!

I was just about to write the same problem, but I don't have VMware; my laptop is late 2008 was running Snow Leopard (uptodate version).
I've scientific softwares so probably would require a clean re-installation of ML. I MUST MENTION HERE that those software which were written for PPC will NOT work on ML. Just found out that one of my important softwares version won't work on ML; need $500 to upgrade that software .
Therefore, I'd also want to know how can I go back to SL.
I'll let you know how clean re-installation has worked.

I downloaded the Apple update yesterday and my computer has slowed down plus I can't move emails to my different mailboxes.

Why has my computer slowed down? I downloaded the update yesterday and since then the color wheel keeps circling and I can't download or move emails to my different mailboxes. There is no consistent patern in which emails can be transferred. There is a consistent patern with the color wheel coming on while I am typing and stoping the recording of the keys.

Please download, install and run Etrecheck.
Etrecheck is a small, unobstrusive app that compiles a snapshot of your entire Mac hardware system and installed software.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.

How do I fix a Safari application that slows down and freezes everything?

Apple called last fall and said my particular Mac had a hard disk problem and they replaced it at the Apple store in late January 2013. I backed up the information on an external harddrive and used Time Machine before to transfer all the information to the new drive. Everything worked well and I finally put on Mountain Lion at 10.8.4. I also have Carbonite as a backup and it apparently was not enabled when I transferred the files until early May. In early May I had not used my iMac for about a month and when I started it I found about 40 named file folders on the Desktop that were empty. Some of those had named items in them but when I clicked on them they would dissappear. The actual files did exist and were not effected when I dumped the apparent alias folders. Safari started and would be ok at first but if I went away for an hour it would slow down. I took it in to the Genius Bar at Apple and they ran some tests and got rid of MacKeeper which they felt was causing the problem. I got my Mac back home and it still started slow but worked well at first and then started going slow. If I opened Word it would also start working at a slower speed. I needed to force quit Safari and the Word progran in order to quit or restart the Mac. I got an appointment for the next day and they ran all sorts of tests and the hard drive was working normally. They tried tweeking different areas and sent me home again. When I started working again it did the same thing, I would start out fine and eventually slow down and needed to be force quit to get out of it. A message came up indicating my MasOSX startup disk had no more space available for applications memory. I took it in a third time and the Genius went to the Activity Monitor and the Safari PID was 221 and %CPU 107, Threads 21 Real Mem 2.73 GB, Virtual Mem 22.00 Kind, Intel (64). I had no idea what that meant. I went home again and it still ran slow and couldn't run the programs for any length of time before it ran slow and affected the other programs so they would only quit if I used Force quit. I took it in for the forth time an they decided to keep it overnight. They ran ASD first to rule out memory. They noticed during the appointment the computer was slow to perform normal tasks such as showing boot options, booting into user, bootingto external user. If the ASD passed then they would perform erase and install and only restore users and application files from backup drive. They did this on Wed and Thur. night and I took it home Friday night, June 14 and it still has the same problem. Typing this message right now means typing and waiting for the words to appear.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; sudo defaults read com.apple.loginwindow LoginHook; } | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}' | open -f -a TextEdit
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

Upgrade to Yosemite Slowed down computer substantially

Hi All,
I recently upgraded my MBP (mid-2009) to Yosemite.    I noticed that people have been using EtreCheck to determine what is the root cause of these Yosemite upgrade slowdowns.   My issue is that I am having difficulty interpreting the output file.   Any help and recommendations would be appreciated.
Here is the file:
Problem description:
After upgrading my MacBook Pro 2009 to Yosemite from Mavericks, everything has slowed down substantially, including loading of pages in Safari.
EtreCheck version: 2.0.11 (98)
Report generated November 12, 2014 at 4:44:03 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2009) (Verified)
MacBook Pro - model: MacBookPro5,5
1 2.53 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 9400M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: one day 12:16:13
Disk Information: ℹ️
Hitachi HTS545050B9SA02 disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Mac HD (disk0s2) / [Startup]: 499.25 GB (60.36 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
OPTIARC DVD RW AD-5960S
USB Information: ℹ️
Apple Internal Memory Card Reader 7.95 GB
S.M.A.R.T. Status: Verified
NO NAME (disk1s1) /Volumes/NO NAME : 7.94 GB (3.82 GB free)
Apple Inc. Built-in iSight
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Access.app
[loaded] com.parallels.virtualsound (1.0.27 27 - SDK 10.6) Support
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (9.0 24217.979618) Support
[not loaded] com.parallels.kext.hypervisor (9.0 24217.979618) Support
[not loaded] com.parallels.kext.netbridge (9.0 24217.979618) Support
[not loaded] com.parallels.kext.usbconnect (9.0 24217.979618) Support
[not loaded] com.parallels.kext.vnic (9.0 24217.979618) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.5.3 - SDK 10.6) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.CallHistoryPluginHelper.plist
[failed] com.apple.nsurlsessiond.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.audio.coreaudiod.plist
[failed] com.apple.ctkd.plist
[failed] com.apple.GSSCred.plist
[failed] com.apple.nehelper.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.citrix.AuthManager_Mac.plist Support
[running] com.citrix.ServiceRecords.plist Support
[loaded] com.google.keystone.agent.plist Support
[invalid?] com.kaspersky.kav.gui.plist Support
[running] com.kodak.BonjourAgent.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[loaded] com.parallels.mobile.prl_deskctl_agent.launchagent.plist Support
[running] net.juniper.pulsetray.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.google.keystone.daemon.plist Support
[failed] com.kaspersky.kav.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.parallels.mobile.dispatcher.launchdaemon.plist Support
[loaded] com.parallels.mobile.kextloader.launchdaemon.plist Support
[invalid?] com.rogueamoeba.hermes.plist Support
[running] net.juniper.AccessService.plist Support
[not loaded] net.juniper.UninstallPulse.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.kodak.KODAK AiO Annual Opt.plist Support
[loaded] com.kodak.KODAK AiO Firmware Updater.plist Support
[loaded] com.kodak.KODAK AiO Software Updater.plist Support
[running] com.parallels.mobile.startgui.launchagent.plist Support
[invalid?] com.zeobit.MacKeeper.Helper Support
User Login Items: ℹ️
Garmin Express Service Application (/Applications/Garmin Express.app/Contents/Library/LoginItems/Garmin Express Service.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
Default Browser: Version: 600 - SDK 10.10
Flip4Mac WMV Plugin: Version: 3.0.0.126   - SDK 10.8 Support
OfficeLiveBrowserPlugin: Version: 12.3.5 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Mismatch! Adobe recommends 15.0.0.189
iPhotoPhotocast: Version: 7.0 - SDK 10.8
CitrixICAClientPlugIn: Version: 11.5.0 - SDK 10.6 Support
googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGpsControl: Version: 4.0.4.0 Release - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
JavaAppletPlugin: Version: Java 7 Update 60 Check version
User Internet Plug-ins: ℹ️
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
WebEx: Version: 1.0 Support
Safari Extensions: ℹ️
OpenIE
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
MacFUSE Support
Perian Support
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Mac HD: Disk size: 499.25 GB Disk used: 438.89 GB
Destinations:
Opt_NHD_1 [Local]
Total size: 999.74 GB
Total number of backups: 6
Oldest backup: 2014-07-10 03:42:30 +0000
Last backup: 2014-11-08 22:33:01 +0000
Any recommendations that you might think of to remedy my crazily slow machine with OS X Yosemite would be appreciated.
Thank you.
Michael
Size of backup disk: Too small
Backup size 999.74 GB < (Disk used 438.89 GB X 3)
Top Processes by CPU: ℹ️
      23% WindowServer
      7% com.apple.WebKit.Networking
      3% Safari
      2% hidd
      1% sandboxd
Top Processes by Memory: ℹ️
120 MB Mail
64 MB Safari
60 MB Finder
56 MB WindowServer
47 MB mds_stores
Virtual Memory Information: ℹ️
990 MB Free RAM
863 MB Active RAM
528 MB Inactive RAM
803 MB Wired RAM
9.40 GB Page-ins
227 MB Page-outs

Can you please help me as well? Thanks.
Problem description:
My Macbook runs very slow (slower than Windows). I upgraded to Yosemite right our of the box. Heard great things about Mac before buying, but really disappointed.
Hope this resolves my problem.
EtreCheck version: 2.1.5 (108)
Report generated 29 December 2014 12:45:34 pm IST
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Mid 2012) (Verified)
    MacBook Pro - model: MacBookPro9,2
    1 2.5 GHz Intel Core i5 CPU: 2-core
    4 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1600 MHz ok
        BANK 1/DIMM0
            2 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
    Intel HD Graphics 4000
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 4 days 2:2:34
Disk Information: ℹ️
    APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Macintosh HD (disk0s2) / : 100.00 GB (46.67 GB free)
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        Windows (disk0s4) /Volumes/Windows : 100.00 GB (99.79 GB free)
        Data (disk0s5) /Volumes/Data : 298.98 GB (202.44 GB free)
    HL-DT-ST DVDRW GS41N
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Computer, Inc. IR Receiver
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Kernel Extensions: ℹ️
        /Applications/Karabiner.app
    [loaded]    org.pqrs.driver.Karabiner (10.4.0 - SDK 10.9) [Support]
Problem System Launch Agents: ℹ️
    [killed]    com.apple.CallHistoryPluginHelper.plist
    [killed]    com.apple.icloud.fmfd.plist
    [killed]    com.apple.security.cloudkeychainproxy.plist
    3 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
    [killed]    com.apple.ctkd.plist
    [killed]    com.apple.emond.aslmanager.plist
    [killed]    com.apple.periodic-weekly.plist
    [killed]    com.apple.wdhelper.plist
    4 processes killed due to memory pressure
Launch Agents: ℹ️
    [not loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [loaded]    com.google.keystone.agent.plist [Support]
    [loaded]    com.oracle.java.Java-Updater.plist [Support]
    [loaded]    org.macosforge.xquartz.startx.plist [Support]
Launch Daemons: ℹ️
    [loaded]    com.adobe.fpsaud.plist [Support]
    [invalid?]    com.adobe.SwitchBoard.plist [Support]
    [loaded]    com.google.keystone.daemon.plist [Support]
    [loaded]    com.hikvision.iVMS-4200.plist [Support]
    [loaded]    com.microsoft.office.licensing.helper.plist [Support]
    [loaded]    com.oracle.java.Helper-Tool.plist [Support]
    [loaded]    jp.co.canon.MasterInstaller.plist [Support]
    [loaded]    org.macosforge.xquartz.privileged_startx.plist [Support]
    [loaded]    org.pqrs.NoEjectDelay.load.plist [Support]
User Launch Agents: ℹ️
    [loaded]    com.adobe.AAM.Updater-1.0.plist [Support]
    [running]    com.microsoft.LaunchAgent.SyncServicesAgent.plist [Support]
User Login Items: ℹ️
    Mail    Application (/Applications/Mail.app)
    Messages    Application (/Applications/Messages.app)
    Karabiner    Application (/Applications/Karabiner.app)
    Android File Transfer Agent    Application (/Users/[redacted]/Library/Application Support/Google/Android File Transfer/Android File Transfer Agent.app)
    WD Quick View    Application (/Library/Application Support/WDSmartware/WDQuickView.app)
Internet Plug-ins: ℹ️
    FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
    QuickTime Plugin: Version: 7.7.3
    Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
    Default Browser: Version: 600 - SDK 10.10
    o1dbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
    WebVideoPlugin: Version: 3.0.4.14 - SDK 10.7 [Support]
    SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 [Support]
    googletalkbrowserplugin: Version: 5.38.6.0 - SDK 10.8 [Support]
    JavaAppletPlugin: Version: Java 8 Update 25 Check version
3rd Party Preference Panes: ℹ️
    Flash Player [Support]
    Java [Support]
    WDQuickView [Support]
Time Machine: ℹ️
    Time Machine not configured!
Top Processes by CPU: ℹ️
        22%    Finder
        19%    firefox
        18%    WindowServer
        14%    uTorrent
         0%    AddressBookSourceSync
Top Processes by Memory: ℹ️
    468 MB    firefox
    146 MB    Mail
    107 MB    Finder
    94 MB    Microsoft Word
    90 MB    SubmitDiagInfo
Virtual Memory Information: ℹ️
    17 MB    Free RAM
    1.26 GB    Active RAM
    1.26 GB    Inactive RAM
    894 MB    Wired RAM
    18.26 GB    Page-ins
    724 MB    Page-outs
Diagnostics Information: ℹ️
    Dec 28, 2014, 12:43:22 PM    /Library/Logs/DiagnosticReports/Preview_2014-12-28-124322_[redacted].hang
    Dec 28, 2014, 12:36:17 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/MassStorageCamera_2014-12-28-1 23617_[redacted].crash
    Dec 28, 2014, 12:11:57 PM    /Users/[redacted]/Library/Logs/DiagnosticReports/Mail_2014-12-28-121157_[redact ed].crash
    Dec 27, 2014, 06:45:31 PM    /Library/Logs/DiagnosticReports/discoveryd_2014-12-27-184531_[redacted].crash

Slow down of Transfer to Apple TV

Similar Messages

Maybe you are looking for