Slow iPhone 3Gs with Airport Extreme WiFi

This seems to be a pretty well established issue as there are in-depth videos on YouTube demonstrating this phenomenon. In a nutshell, my network connection speed stinks on my new iPhone 3Gs when I'm connected to the internet via my Airport Extreme. It's most notable when trying to watch any videos using the phones YouTube app. Too slow downloading to make it worth using. Any known fixes out there? This IS NOT a jail-broke phone BTW, I am 100% legal with AT&T service. Running the latest version of SL and have the latest iPhone OS installed. Any help is appreciated!

Try asking this question somewhere other than the "Mail and Address Book" forum.

Similar Messages

Slow Internet Speeds with Airport Extreme

I am noticing a dramatic slow down with my Airport Extreme. However, I have noticed this is an intermittent issue. Here are the specs of what I am running:
• Airport Extreme Base station that is plugged into a cable modem. The AEBS is routing the IP addresses.
• Plugged into the AEBS is an 800mhz iMac that is hardwired in. No slow down is noted on this computer.
• MacBook (Less than 2 months old) is connected to the AEBS wirelessly.
• iPhone is connected to the AEBS wirelessly.
Where I am having the problems is with the MacBook. I will have full signal strength and yet it takes for ever to load a page. Plus sometimes the connection will time out. As stated above this is an intermittent issue. Sometimes everything works fine, other times the connection has issues. All pieces of equipment are running the latest firmware. Does anyone have any suggestions to solve this issue?

I would recommend changing the wireless channel of the Extreme.
Open Airport Utility, and select Manual Setup. Note on the summary page what the channel is set to, most often it will be set to channel 6 (Automatic), but it could be anything between 1-11.
Goto the Wireless tab and adjust the channel so it several channels apart from the current one. If it is on channel 6, I recommend channel 1 or 11.

Very slow transfer speeds with Airport Extreme and MacBook

I have been using a new Airport Extreme without problem at my home for the past six weeks. The speed and range was excellent with both my MacBook Pro and the MacBook which I purchased a few weeks ago. I came out to Greece with both laptops and a new AP Extreme box for my home network here. After set up I noticed that internet access was lethargic on the MacBook and file transfer between the two computers was extremely slow. The problem seems to be with the new MacBook (although it was working well in London). I've done some speed tests and the internet download speed is only 48 kpbs! I also notice that the range is very poor--in the room next to the router I am down to five bars. If I connect to the AP Extreme with cable I get the full 1Mbps I would normally expect here in Athens (ADSL nominal 2Mbps). The MacBook Pro has no problems with wireless access speeds or range, so I am assuming this has to be a problem with the AP extreme card in the MacBook. Is there anything I have overlooked? Perhaps something to do with setting up the new AP Extreme here in Athens?

By process of elimination I realised that the only cause of the sudden slowness must be software that I had installed recently. The only software I had added was a wifi utility to detect available networks--open or protected. Unlikely as it sounds, quitting the utility (which I had set to load on startup) made a dramatic improvement in performance.

Slow Speedtest results with Airport Extreme Card

Hi,
We just upgraded our internet to a 5G network with TWC. All the devices in our home are now speedtesting at 100 mb/s wonderfully.
Except one.
My Mac Pro 8 Core 2009 4,1. Running OSX 10.8.5
The mac pro is speedtesting at only 30 mb/s while everything else (MBP, MBA, iphone 5) all speddtesting at 100 mb/s. Alla re connected to the new network.
Is the problem the older airport extreme card? Or is there something I can do in settings or firmware upgrade to sort this?
Here are the specs of the Airport extreme card on the MP:
Card Type:    AirPort Extreme (0x14E4, 0x8E)
Firmware Version:    Broadcom BCM43xx 1.0 (5.106.98.100.17)
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:    Supported
AirDrop:    Supported
Status:    Connected
Thanks!

tek_uk, Welcome to the discussion area!
(a) Did you connect the external 'T' AirPort shaped antenna to the back our your G5? This antenna shipped with your Power Mac G5.
(b) Compare the antenna wire connection at the AirPort Extreme card with the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card.

I am unable to get Airport Extreme WiFi to work with Windows 8 Sony Laptop

My Airport Extreme WiFi works with my Mac Book Pro, iphones, ipad and DVR's, but will not work WiFi with my Sony VAIO laptop running Windows 8. Although it does work with the laptop using a ethernet cable. Has anyone else had this issue and can you please tell me how to resolve the problem?

Windows can have issues with the wireless name.
Make sure the name conforms to windows standard.
Short, 2-20 characters
No spaces,
Pure alphanumeric.
eg AEwifi is a good wireless name.
Fred Blog's Airport Extreme Wireless87AD34 is a really bad name.
Test also by removing the security and just see if you can connect if the short name doesn't help.
WPA2 Personal is really the only security worthy of the name and the password should be mix of upper and lower case plus numbers.. keep it pure alphanumeric also.
Set fixed wireless channels at least for 2.4ghz may help, depending on your location geo standards wise.
Test 11, 6, 1 in that order. With no security briefly. And a short name. (different name on the two bands is also a good idea).
Then wireless is not compatible.. you should download another driver for whatever wireless card the Sony uses.. intel most likely and they have a reputation as lousy. So download latest and a few prior to that as well.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

SLOW download on Airport Extreme wifi. WireThe download speeds are next to nothing above 25 feet away. When i stand next to the AEB it is fine. Anyone know why? Doubt ill get another AEB, very unreliable and has been for some time.

SLOW download on Airport Extreme wifi. Wired is great. The download speeds are next to nothing above 25 feet away. When i stand next to the AEB it is fine. Anyone know why? Doubt ill get another AEB, very unreliable and has been for some time.

No cordless phone (two iPhones and two iPads though). It does have one or two walls on line of sight. A few wireless door security zones. And a large china cabinet that my wife sure wouldn't let me move. Do any of these sound significant enough to drop the dowload from 30Gb to .1GB...while upload stays consistent. I have had better signal strength through two walls 100 feet out from my house, havent tried recently though. I am suddenly aware as my switch is acting up and i had to use wifi on my xbox.

Safari not able to access internet through wifi after updating iphone 3gs with ios6

i have updated my iphone 3GS with ios 6 and initially my wifi worked fine but for some strange reason it stopped connecting to internet even though its connected to my home wifi i have and tried and failed with all the possible solutions given in this forum i am able to use safari with my cellular data network but with wifi its not working please provide me with a solution

well, first check whether you're connected to the blackberry network...
how can I check whether myself connected to blackberry?
Check within the network bars on the phone whether it is showing you 3G, EDGE or GPRS in capital letters...!!
If not give a hard-reset to the phone (remove the battery put it back once)...
And if it shows in caps letters then try requesting for services again... how? on the phone desktop > within the search bar > type "Host Routing Table".... search results shows you as "options"... select that & select host routing table... afterwards, hit the blackberry menu button > select register...
.RoCkInG dUdE.
Trust Your Technolust | Do not PM for any support
If a solution received, please hit on to show your support.

DNS Server Issues with Comcast and Airport Extreme wifi routers

I am having significant challenges with 3 Airport Extreme (latest gen) wifi routers and my Comcast Xfinitity service. It once worked just fine, but now I continually get the blinking amber lights stating "No DNS servers" for each of the Airport Extreme (AE) routers. My configuration is:
Coax cable -> Comcast Xfinity cable modem -> ethernet to 16-port gigabit ethernet switch ->->-> ethernet to 3 Airport Extremes around the house direct connected with switch
I have many wifi devices throughout the house (iPads, MacBooks, home automation devices) as well as direct-connected devices via ethernet (one PC connected to AE router).
Each Airport Extreme router is set with these settings in the Airport Utility app:
Internet tab= Connect using: DHCP
Wireless tab= Network mode: Create a wireless network
Network tab= Router mode: Off (Bridge Mode)
I have attempted to put the Xfinity cable modem in bridge mode, and use the Airport Extreme to serve up the IP addresses, but still lost internet connectivity.
I have also attempted to set the Network tab=> Router Mode to "DHCP and NAT" but get "Double NAT" error issues as well.
I have tried using the Comcast DNS server addresses (75.75.75.75;75.75.76.76) setting on the Internet tab for the routers and do end up getting a green light, but NO internet connectivity.
Lastly, I have tried using the Google DNS servers (8.8.8.8;8.8.4.4) setting on the Internet tab the routers giving me the No DNS servers amber light error and again, no Internet connectivity for either wifi-connected or even ethernet connected (directly to Airport Extreme router) devices (like my PC) despite getting a green light on the router.
Any this point, it really seems that these AE routers are NOT compatible with the Xfinity cable modem or service… (and yes, I've tried power-cycling and restarting the modem, and then the AE routers, MANY times to little avail).
Should I move one of these Airport Extreme wifi routers to before the switch, and have the other 2 in Bridge mode after the switch? Do I need to setup a specific range of DHCP reservation addresses for each different AE router?
Appreciate any insight anyone can share with this aggravating DNS server issue between Comcast & multiple Airport Extreme wifi routers.

I do not see anything wrong with your basic setup.. the issue is indeed the WAN ports of the AE.. AC version are having problems with some network equipment.
You have listed a stack of things you have tried.. but I want you to move the ethernet patch cable you use on each AE to its LAN port instead of WAN.
Restart the airport when you do that.. and then see if it becomes stable.
In bridge mode the airport moves the WAN port to LAN.. but the WAN port setup itself seems more problematic than the LAN ports.
There are other methods we can try if this does not work.. but in the end.. I would be tempted to take the whole lot back to apple.. they need to start making equipment that works with standard modems and switches.
BTW what brand is the 16 port switch?? Does it happen to be managed (smart type)?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. iPad Synchronization is fine. Any ideas to solve it?

With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?

This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan

Lost wifi connection with Airport Extreme.

Lost wifi connection with Airport Extreme. When I connect my modem directly to the computer I can access the internet, however as of this morning I am no longer able to access the internet via wifi on my airport extreme. I have been using airport extreme for 6 months or more and everything has been working fine.
When I diconnect my airport extreme and reconnect it I get wifi for 1-2 minutes working fine, but then i lose internet connection. According to airport Utility everything is setup and connected and working ok, but I still am not able to access any webpages over wifi.

I have the same issue, I'm getting droppeds from wireless constantly

Problems using wired airport express to extend airport extreme wifi

I've followed the instructions in this community to use a wired airport express to extend an airport extreme wifi network. Here is the issue I'm having.
The airport express wifi network has the same name as the airport extreme wifi network. So far so good. My laptop will pick up the airport express wifi in my office, and the airport extreme wifi in the other part of the house without any problems.
However, where the signals for the two overlap, my laptop will often latch on to the weaker wifi signal (I can tell by the number of bars) and my connection speed slows down significantly. Since both airports have the same wifi name, I can't manually switch it to the better signal.
Has anyone encountered this and have suggestions? My only solution was to give the two separate wifi names so i can switch manually, but this is an inelegant solution.

Hey dude, i'm having the same problem and i didn't find a proper solution for it, appart of creating another network as you said.
Its weired cuz in my case only the small things doesn't connect to the new router(using 2 airport extreme's) such as the iphones ipods and apple tv, but my mac did it great change the signal all the time i went from the basement to my room. So i just create another network and for me it wasn't a big deal to change it all the time i go to the basement, even more when use a mac.
I know thats not the point when you have two wifi routers, but you know it's tolerable.
Greetings!

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Is anyone successfully using Netgear WN3000RP with Airport Extreme?

Got a brand new WN3000RP wifi range extender. I went through the installation several times myself and several times with tech support to no avail. Tech support told me to return it for a new one.
Everything is connected and the install process goes smoothly but I ultimately cannot ever use the extended network to connect to the Internet. I can see the range extender's mac address on the router but the two devices don't seem to talk to each other.
I'm just wondering if I'm going to have the same problem with a new one or not and wondering if it's even compatible with Airport Extreme routers.
I'm using Airport Utility version 6.1.
Can someone out there can let me know if they got this device working with their Airport Extreme?
Also, what are my other options to extend my range?

I know this answer is likely too late to help but it may help users in the future. In the situation where you are using a range extender there are a few things you need to confirm to make sure it is going to function properly and also some best practices to make sure your network is running smoothly.
1. Is the range extender using the router for DHCP? I have found in my experience is that the router should "reserve" a MAC Address and IP for the the Range Extender. Most times it is 192.168.1.2. I would first set up the router to have the range extender have a set IP Address of 192.168.***.2 and add the MAC Address to the list so that the Range Extender has a Static IP Address in the private network.
2. Initially set the range extender to have an SSID(Wireless Network Name) different than the Router's(Airport) SSID. This will allow you to determine if the Extender is functioning normally without it interfering with your existing network.
3. At this point it is important to set the Range Extender DHCP. What this will do is let the range extender request IP Addresses, DNS(Domain Name Servers), and UPNP Requests. This is where I feel that a lot of people are having issues and assume that the router will still resolve DHCP. If the SSID and Wireless Channel are the same your network will work intermittently with internet access until it is configured correctly.
4. For Devices that will stay on your network such as NAS(Network Storage), Smart TVs, Apple TVs I would recommend setting Static Private IP Addresses for each of them. Such as 192.168.1.3(NAS), 192.168.1.4(Apple TV), 192.168.5(Smart TV). Also if you enter the MAC Address for each device when you set this up it would be recommended.
5. If devices are having issues connecting to internet or certain web services are having issues. It may be necessary to set the Extender(Which is now handling DHCP with IP, DNS, and UPNP passed through from the router) as the Gateway for which device may be having issues. For instance if the Apple TV is having issues communicating on the network(Air Play, Sharing, Streaming) set or configure the network settings manually on the Apple TV. The IP Address would be the one your reserved on your router. The Subnet Mask would likely be 255.255.255.0 by default unless you have changed the amount of potential "Hosts" on your network. The Gateway would be the IP Address of the Extender(Which is paired with your router). DNS servers should be handled automatically. In some situations with certain devices you may need to use a DNS Service for Streaming, but this generally isn't needed.
A Visual Representation would be
ISP>Modem if needed>Router(DHCP Enabled and MAC Addresses Reserved)>Localized Devices<Range Extender(DHCP Enabled and Static IP Address 192.168.***.***)<Apple TV(Manually Configured IP Settings and Range Extender set as Gateway)<Other Devices Localized to Range Extender but not in range of Router(AirPort).
In this representation you should be able to have the router and range extender broadcast Identical SSID and Channels(Radio Frequency). This also allows for advanced settings to be put in place such as LAN networks or Subnets.
An issue that may come up is communicating with the range extender or router while setting up the network. A simple workaround that will allow you to configure either if the network doesn't let you connect on a MacBook is to go to System Preferences>Network>Wifi or Ethernet>Advanced>TCP/IP in configure IPv4>Set Using DHCP with Manual Address> Then IP Address that corresponds with your current network 192.168.***.*** but is not the same as the gateway, router, or reserved devices. This will allow you to connect and configure devices even if router or extender is not assigning IP addresses or operating properly.
Disclaimer* This advice is only for informational purposes with no warranties expressed or implied.

Windows Mobile 5.0 Cingular 8525 phone and Airport Extreme WiFi

Does anyone know how to get the cingular 8525 phone which runs windows mobile 5.0 to connect with my current airport extreme wifi? Are they even compatible? I can connect to other wifis, but they have all been open to the public.

You'll probably get a better set of responses if you post your question in Apple's forum for Airport and Windows <http://discussions.apple.com/forum.jspa?forumID=1014> rather than this one, which is dedicated to Mac and Windows compatiblity issues.
Good luck! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

Slow iPhone 3Gs with Airport Extreme WiFi

Similar Messages

Maybe you are looking for