Slow load times for itunes u

We have noticed that lately iTunes U for UW-Whitewater (uww.edu) has been extremely slow, and sometimes even timing out. We have been trying this from various different locations and computers. It appears to be something on the apple side. Has anyone else seen this?
Apple Engineers: Any updates as to what might be going on?

Greetings Guys;
We had the same issue yesterday, but the issue seemed to be affecting only the iTunes desktop application. When I would preview using the iPad, load times were normal. The issue seems to have been resolved this morning.
Syd Rodocker
Tennessee State Department of Education

Similar Messages

Intermittently slow load times from iTunes, while Netflix

TV shows from iTunes sometimes take a long time to load, while content from Netflix & Hulu seem fine. Why does iTunes sometimen indicate that it may take over an hour to load a 45min TV show?

Netflix/Hulu adapts to the connection in order to stream instantly. iTunes content is fixed and will start once enough has loaded. The time it takes is dependent on your network.
720P requires minimum 6mbps for instant stream
1080p needs 8mbps
Check speedtest.net to verify
Interference can also play a role, check istumbler or netstumbler to verify
Male sure you are on your ISPs DNS (settings - network - configure DNS - automatic)

Slow load time for Quick Time in Mail

Does anyone know why when you receive a video file (like WMV) in Mail that Quick Time takes so long to load it? It did not use to take so long before Snow Leopard. If you click on play before it is loaded, you get audio only. Are there any work arounds or something other than Quick Time that can be used?

From Adobe Support: 17 secs response time is a normal time interval for the "Print Settings" dialogue.

Very Slow Load Times for PDF Document

Hi,
I have a PDF document that takes forever to load in preview (on the order of a minute or more). It is eight pages, but when I try to go to the last two pages, each of which has a drawing created by using Autoshapes in Microsoft Word, again they take a minute or more to load.
The document looks to have been created by Acrobat 6 for Windows from a MS Word document. Adobe Reader 7.0.7 on another machine loads the document correctly and speedily (well, as speedily as Adobe Reader can...).
Are there known problems with this type of graphics, MS Word drawings, in a PDF document? Is there any way I can make the document load faster?
Thanks,
Jeff Corbets

Hi there
I have a tutorial on this process available at the link below:
Click here to view
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Slow load times for rentals on Apple TV

Out of a clear blue sky, I find that my hard-wired Apple TV takes hours to prepare a movie for watching. I've adjusted the setting in iTunes on the ATV to make sure it defaults to 720p and not 1080p, but the problem still exists.
As an example, the other day I rented a movie and it took over two hours(!) for it to stream enough for me to be able to watch. If I switch to Netflix, I have no problem streaming anything in HD, and the same for Hulu or YouTube. I can also stream material from my MacBook Pro or iMac over my local network and there is no lag whatsoever.
Anyone know what's going on? I'm a bit surprised that a wired Ethernet connection from my ATV to my router is demonstrating this type of behavior.
Thanks for any help anyone can offer!

The first thing to check would be your internet download speed, you can do this at www.speedtest.net.
1080p HD movies require a recommended speed of 8 Mbps, 720p HD movies require a recommended speed of 6 Mbps, while SD movies require a recommended speed of 2.5 Mbps.

Slow loading time for text

The website is published, and was working fine. Now when I go to the website homepage > projects > enclosed retail (or any of those project pages) , the text that is supposed to show under the images isn't loading. If I move the mouse around over where the text should be (underneath the image), it reappears, but otherwise stays hidden. How do I get the text to load with the images?
www.jp2architects.com

Chrome version 33 broke the loading of web fonts (for most websites that use webfonts, not just Muse sites). The symptom of the bug is that some combination of the webfonts used on a page fail to draw on the first paint of the page. Refreshing the page or interacting with it such that items are re-painted by Chrome causes the undrawn text to appear.
Google is very aware of the bug. The Google bug report is here <https://code.google.com/p/chromium/issues/detail?id=336476&q=font&colspec=ID%20Pri%20M%20I teration%20ReleaseBlock%20Cr%20Status%20Owner%20Summary%20OS%20Modified>. From the notes in the bug it appears they're considering folding a fix from their development branch back into 33, presumably so they can do an update prior to their normally scheduled 34 release.

Yahoo! slow load time

Does anyone know if there is going to be a firmware update to address the excessi'vely slow load times for DRMed WMA files such as those from Yahoo!Music Unlimited? I have "cleaned up" my Micro and it still takes a WMA file about 7 seconds to load if I just go to a random one, whereas it only takes about -2 seconds for a random MP3 to start playing. This is rather annoying, and I'm just wondering if the code that does the license check is being optimized.

indo87 wrote:
Try to convert the wma to mp3 with a program doesnt take that long.
But it's a DRM'ed file, so it's not legal--unless you use the program I just mentioned in this thread, and it's bleeding-edge enough that the RIAA might sue them anyway.
That delay is perhaps the only problem with 2.20.05; I didn't have quite as much a delay on DRM'ed files with 2..02. (But I also switched from a Napster To Go trial to YMU at the same time, so that might be part of it.) It's not the 30-second delay that the WMP updates in the FAQ post fix, however.

I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
Here is the crash report:
Interval Since Last Panic Report: 5426204 sec
Panics Since Last Report:          2
Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
Wed Mar 20 11:36:53 2013
panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
Backtrace (CPU 0), Frame : Return Address
0xffffff81eb0eb950 : 0xffffff801aa1d626
0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
0xffffff81eb0eba00 : 0xffffff801aa435d2
0xffffff81eb0ebae0 : 0xffffff801aa663f7
0xffffff81eb0ebb20 : 0xffffff801aa67398
0xffffff81eb0ebc70 : 0xffffff801aa6887c
0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
0xffffff81eb0ebf50 : 0xffffff801ade182a
0xffffff81eb0ebfb0 : 0xffffff801aaced33
BSD process name corresponding to current thread: launchd
Mac OS version:
Not yet set
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
Kernel slide:     0x000000001a800000
Kernel text base: 0xffffff801aa00000
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 1070542822
last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
loaded kexts:
at.obdev.nke.LittleSnitch    3908
com.apple.driver.AppleIRController    320.15
com.apple.driver.AppleUSBCardReader    3.1.0
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    34
com.apple.iokit.SCSITaskUserClient    3.5.1
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.2.2
com.apple.driver.AppleUSBHub    5.2.5
com.apple.driver.AppleFWOHCI    4.9.6
com.apple.driver.AirPort.Atheros40    600.70.23
com.apple.driver.AppleUSBEHCI    5.4.0
com.apple.driver.AppleAHCIPort    2.4.1
com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
com.apple.driver.AppleUSBUHCI    5.2.5
com.apple.driver.AppleEFINVRAM    1.6.1
com.apple.driver.AppleACPIButtons    1.6
com.apple.driver.AppleRTC    1.5
com.apple.driver.AppleHPET    1.7
com.apple.driver.AppleSMBIOS    1.9
com.apple.driver.AppleACPIEC    1.6
com.apple.driver.AppleAPIC    1.6
com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
com.apple.nke.applicationfirewall    4.0.39
com.apple.security.quarantine    2
com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
com.apple.iokit.IOUSBHIDDriver    5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
com.apple.iokit.IOUSBMassStorageClass    3.5.0
com.apple.driver.AppleUSBMergeNub    5.2.5
com.apple.driver.AppleUSBComposite    5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
com.apple.iokit.IOUSBUserClient    5.2.5
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IO80211Family    500.15
com.apple.iokit.IOAHCIFamily    2.2.1
com.apple.iokit.IOEthernetAVBController    1.0.2b1
com.apple.iokit.IONetworkingFamily    3.0
com.apple.iokit.IOUSBFamily    5.4.0
com.apple.driver.AppleEFIRuntime    1.6.1
com.apple.iokit.IOHIDFamily    1.8.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    220
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.DiskImages    344
com.apple.iokit.IOStorageFamily    1.8
com.apple.driver.AppleKeyStore    28.21
com.apple.driver.AppleACPIPlatform    1.6
com.apple.iokit.IOPCIFamily    2.7.2
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: HL-DT-STDVDRW GA32N
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
http://eshop.macsales.com/shop/apple/memory/iMac
http://www.crucial.com/

Slow load times on AU sites?

is anyone still experiencing slow load times on AU sites, apparently this is resolved but I just emptied my cache and checked load times on half dozen sites. Still very slow!

I just loaded http://www.prettypollution.com.au/ and it took 17sec.
Got similar time for http://www.designexperts.com.au/ as well. So, although not very fast it's much better than what you’re seeing. Could be something in the node you’re being routed through.

Page not found, slow loading times CC Files

Hi,
Two weeks ago I reported that there were CC files problems like 'page not found' errors and slow loading times and pages not even showing anything. Those problems were temporarily resolved but are back as of today.
Please fix this because for me this is not workable and I guess for many others. I've already moved part of my design files away from CC Files and am now reaching the point were I want to abandon this beta-ware altogether.
I'm living in Europe, maybe this gives additional info. Maybe server problems only in this continent?
Thanks for looking into this.
Jan

So what product would you advice me to file this bug report under? There is no Creative Cloud Files entree or similar.
I'm not sure I'm taken by Adobe support channels policies. if I tweet a complaint some employee tell me I'll be called back by support. Instead of being called back I get asked per email to report on the community forums, when I post on the forum someone tells me to file a bug report. Ehhh...
Time to move on.
Jan

Random, excruciatingly slow load time with 7900 Elite small form factor desktops

Hi all, I have approx 300 HP 7900 Elite small form factor machines in my environment that were deployed just over two years ago. from the time of deployment we have experienced on about 50 occasions a random, excruciatingly slow load time that take about one hour for the user to login and open their programs. there has been no rhyme or reason for it, different floors, areas of the building, etc. I searched the forum for similar probs and didn't see one like this, I hope I'm not duplicating efforts from someone else's question... One thing we have noticed is that if we re-boot while it is going through the start-up process, it seems to "make it angry" and will lengthen the overall load time. We use the 32-bit Vista Enterprise OS. This is with a "stock" build, that is to say, our standard corporate build. our security policy does not allow users to install software, by the way. Thanks so much if you can help!

Hi,
How is the issue going? Usually, this error can be caused by missing third-party NIC driver. To solve the issue, we can download the missing network
driver and update the WDS boot image to include it.
In addition to the article provided by Chris, the following blog can also be referred to as reference.
http://askmetricks.blogspot.in/2013/03/solvedwdsclient-error-occurred-while.html
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this
information.
Best regards,
Frank Shen

Slow load times

Hi there -
Is there a good way to improve load times for my pages that have Edge animation? I have a very simple slide show set up, and even with the Preloader script, it's taking many seconds to load the page. Any thoughts?
Thanks!

Hi Amy,
Did you try the suggestions in this article?
Edge Animate reduces runtime size by 55%, ‘Save to Custom Folders’ feature, new Preloader options, and more! « Adobe Ed…
animation - Improving Performance in Edge Animate - Graphic Design Stack Exchange
Thanks,
Preran

Increase in Loading time for LV search in 2011

Initially when I loaded LV2011 my quick drop and the search took nearly 5 seconds but now it takes nearly 20 seconds to load so is there any reason for this kind of performance. Also I don't have anyother big software loaded or running in my PC. I have added few toolkits from VI package manager may be that is the reason?.
The best solution is the one you find it by yourself

RavensFan wrote:
In my message in the other thread, I commented that I thought 20 seconds wasn't all that long. But I thought you were commenting on the loading time for LabVIEW itself. That does seem like a long time for any of the internal LabVIEW dialogs to come up.
(Actually, I find several internal dialogs seem to take longer to load the first time then they should including the properties dialog. But not 20 seconds long.)
Hopefully, with this message thread in the LabVIEW forum, others can comment and offer suggestions on how to determine what the issue your having is.
Yes now I have plenty of toolkits ( Thanks for spotting me in the other thread )
Jeff you hit the bullseye. The loading was set as Load palette when needed.
Thanks
The best solution is the one you find it by yourself

Long loading times for Safari on iPad Air with iOS8

I've had long loading times in Safari sInce upgrading to iOS8 on my iPad Air 128 GB. Are any of you having the same experience?

Sometimes I question myself, how come that iOS being held in beta for over quarter or even over a half a year, and most certainly long enough in alpha, still comes out so much raw and buggy every release? Sometimes it feels like it's only getting worse concerning the debugging.
I wanted to address the HR manager of the Apple Inc. to query him/her about HIS/HER dedication to the overall work being done. Why, the ****, does Safari get slow, why, the ****, is it unpredictable to define whether a sound stream in Safari's tab will end upon tab closure or not. Morever, why do iPhone iMessages fail to mark a message or a chain as a read one even thought you just really did it. Beyond that miriad of similar questions I have just another three, since when is it official Apple support position to advise you to wipe out your device and install everything back from iTunes, not the cloud? But what is more important, how come that support representative tells you first to back up your buggy iPad, wipe it out and restore from that backup both with iTunes? Finally, we all know how Apple does cherish it's developers, can somebody tell me how, for heavens sake, this website ever possible to exist then — Texts From Xcode?
I don't want neither need to mention that switching between tabs in iOS7 (I have had no chance to test it in iOS8) in Safari never gave you any sure answer whether your tab will be reloaded when you get back or not: whether have you copy any post before leaving, to paste back on return or not.
After all I do still love Apple, I do love people's ideas. I do love the overall outcome, but I want to tell Mr. Cook one phrase I heard when I used to be a head of a department in a medium size company and had to deal with continuous fails of the personnel and most often ended up doing much things myself, it was not the exact situation as with Apple although I hope you can trace a path: If a manager has to do anything besides managing he or she failed to manage one major issue — the personnel one.

Can I set up a timer for iTunes Match?

I use iTunes on a daily basis at my small graphic design business. I've loved having access to my large iTunes library both here and at home.
Unfortunately, the internet connection I have at work is DSL and, as you can imagine, the upload speeds are horribly slow.
While I love having iTunes Match. I get frustrated whenever the iTunes updates Match. This slows everything down to a crawl, including all of the other people sharing the wireless connection. This happens whenever I add a new mp3 to the library. Sometimes these mp3s are long mixes and take forever to upload. I probably do this on a daily basis.
My question to you all is, is it possible to set up a timer with iTunes Match? In other words, could I program iTunes Match to update everything at night when I'm not using the computer and therefore not interfering with my internet connection during the day?
I realize that most people reading this are not using an internet connection based in the late 90's, like we are. Believe me, I've looked into upgrading and it seems as if we're stuck with what we have for the foreseeable future.
I wonder if anyone has ideas for a work-around to this issue?
Thanks much.

You might want to look into using Automator to accomplish what you want to do. For example, create an Automator action/script to look in a certain folder at a certain and move the audio files to the "automatically add to iTunes" folder, then have it launch iTunes which would then kick off the iTunes Match process. You could have it do all this after everyone has left the office for the night.
It might require some experimentation, though, to get it just right.

Slow load times for itunes u

Similar Messages

Maybe you are looking for