"Slow Oracle Forms 10gR2 using Sun's JRE on Windows 7 x64 laptop

It took millions of years on a super computer to come up with 42.If there would have been a valid Forms 10gR2 Installation on Deep Thought it would have taken just some minutes to get to this answer:
FRM-42<someothernumber> [...]However; the question remains if oracle provides a Install Bundle of Forms 10gR2 for the "Deep Thought" platform or if "Deep Thought" is a supported platform...
cheers

Similar Messages

Slow Oracle Forms 10gR2 using Sun's JRE on Windows 7 x64 laptops and its wo

Slow Oracle Forms 10gR2 using Sun's JRE on Windows 7 x64 laptops and its working good in same windows 7 x64 destops.

Hi,
Try posting your question on the Forms forum: Forms
Andy

Slow Oracle Forms 10gR2 using Sun's JRE on Windows 7 x64

Hi,
We are running Application Server 10gR2 10.1.2.3 and we've been running Sun's JRE on Windows XP SP3 just fine. It is snappy and with the exception of a couple of minor issues, everything works well.
We are now testing a few new workstations running Windows 7 x64 (64bit) with Sun's JRE again and the performance is just horrible. It is almost unusable. We've tried both 32bit (x86) jre and x64 (64bit) no difference. We also tried Firefox (only comes in 32bit version) and the same problem.
Oddly the problem does not exist on Windows 7 x86 (32bit). Anyone have any ideas or suggestions to get it to behave?
Thanks.
George.

First, I think we need to clarify what is and is not certified for use with 10.1.2.3 so that other readers don't misunderstand what is being discussed.
Forms 10.1.2.3 has been certified to use Windows 7 x64 with IE8 and Sun JRE 1.6.0_16+ (32bit only). Refer to the new Forms 10.1.2 Client Statement of Direction which can be found here:
http://www.oracle.com/technetwork/developer-tools/forms/clientsod-forms10gr2-088253.html
If you have previously bookmarked the SOD, please update your bookmark as this is a new location.
Second, without knowing at least some details about the app and even how the client machine is used, it will be difficult to offer any specifics. In general, I don't believe that we (Oracle) have had any specific complaints. However, we are currently investigating at least one performance complaint (it may be yours :) ), but so far details are limited so we don't have much to go on.
In order for anyone to understand a performance problem we must first understand exactly what is meant be terms like "degraded", "slow", etc. In the case of this thread, it has been claimed that it takes "2 seconds" to get from field to field. Is this an accurate measurement or an exaggerated guess? We also need to understand the app and the environment. For example:
1. Besides the change in the JRE from one version to another, what else has changed? For example, are more users accessing the server, was the server or Application Server patched, have there been networking changes, has SSL been enabled where it previously was not, etc.
2. Besides the Forms application, are any other java applications running on the client machine when this performance issue is experienced?
3. Are there any fat applications running on the client machine? For example, some virus scanners tend to hog significant levels of resources and degrade performance from other apps. Email client software also tends to be fat and hog resources (I won't mention names here :) ). Disable or terminate fat apps and retest. What is the result?
4. Does the Forms application execute client side java? For example, WebUtil, custom Beans, etc?
5. Is the client machine configured to access mapped drives (either related or not related to the Forms app)?
6. Has JRE tracing or logging been enabled? This setting can be found on the Java Control Panel (Advanced tab). If yes, disable it.
7. Have you tested setting the JRE "..next-generation Java Plug-in" to OFF? This is also on the Advanced tab of the Java Control Panel under "Java Plug-in". Restart the browser will be necessary.
8. On the server, are the application's modules (fmx, mmx, plx, etc) stored locally with the installation of Application Server or are then access via a net drive?

Re: Configuring Jinitiator for Oracle Forms 10g Using IE 8.0

Hi team,
iam facing difficulty in running the Oracle Forms 10g , using IE 8.0.
What are the settings i need to perform while running the forms, please help me.
While Running : http://localhost:8889/forms/frmservlet
the tab is not getting crashed and it is displaying "We were unable to return you to the page you were viewing."
What are the settings i need to modify before running.. Please help..
thanks

Hello,
http://www.oracle.com/technetwork/developer-tools/forms/documentation/techlisting10gr2-093389.html
     How to use Sun's plug-in with Forms 21-Aug-2008
     This whitepaper describes how to use Sun's plug-in 1.4 or later with Forms version 10.1.2.
Client Platform Statement of Direction 14-Feb-2007
     Describes Oracle Corporation's statement of direction to support Oracle Forms 10g applications on multiple Java client platforms
Denis

Version of oracle forms which uses OCI

Anyone tell us what is the exact version of oracle forms which uses OCI

Hello,
Not sure but I would not be surprised that all versions use OCI connexion.
Francois

Displaying Chinese Character in Oracle Form 6i using Oracle 11g Database

Hi,
Please, can anyone send me the solution for displaying the Chinese characters in Oracle Form 6i using Oracle 11g database and also
the configuration that has to be implemented.Its urgent.
Thank You,
Sridhar.T

displaying the Chinese characters in Oracle Form 6i using Oracle 11g database I'm afraid you might have problems... see Implementing Chinese language in Oracle 11g

How to configure and call Jasperreport from Oracle Forms 10gr2

Dear All
Please help me in configuring Jasperreport with Oracle Forms 10gr2 or AS.
And also tell me how to call a report from Oracle Forms.
Thanks

I have a pro*c precompiled program on unix server (unix environment) and I want to execute or running it from oracle forms, release 4.5 on MS Windows.
how do i execute or running it from oracle forms, release 4.5 ? please tell me what the command (syntaxs) is and all about it ?you can mail me at [email protected]
thank's

Oracle Forms Dev/Serv 6i/Rel 2 for Windows 98/etc failed to install

Has anyone encountered problem when installing the download version of 'Oracle Forms Developer/Services 6i/Release 2 for Windows 98/NT/2000/XP' available in the OTN? I have successfully install Reports 6i but not Forms 6i. The error message that I get is "path:vrf(86): Unbound variable 'Path_too_long_prompt'". My laptop is on OS Windows98.
Please help. Thanks.
~Christina~

Did you get around this? I'm having the same problem.
Thanks,
Ron

Hyperion Planning on Oracle DB 11.1.0.6.0(Microsoft Windows (x64))

1. Is Hyperion Planning 11.1.1.3 certified to work on Oracle DB 11.1.0.6.0 (Microsoft Windows (x64)) ?
2. Is Oracle Database 11.1.0.6.0(Microsoft Windows (x64) certified to work on Windows 7 Pro 64bit ?

You also do realize Hyperion Planning/Essbase/... is not supported on Windows 7 Pro. If you wish to install on a supported operating system install on Windows 2003 Server x64.
Yes, 11.1.0.6 is supported as a database for Hyperion 11.1.1.3 - review the certification matrices for Hyperion at: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
No, Windows 7 is not a supported platform for 11.1.0.6 databas - review http://download.oracle.com/docs/cd/B28359_01/install.111/b32305.pdf
You can also located supported platforms with say 5 minute software with say 10 minutes of using google. If you do not have this much time to put towards the installation then you should not be installing as you should review all installation documentation before proceeding as it is at least a full day activity to do it properly (even after you have done it 20-30 times).
Regards,
John A. Booth
http://www.metavero.com

Security Exception in Oracle Forms when using with JRE.

Hi,
I am am getting an exception whenl I try to dispose a message box(FWindow) received as a popup from an Oracle form page(configured using JRE).
When I hit over the OK/Cancel button to dispose off the messagebox,it is not I get the following error.
Exception in thread "AWT-EventQueue-2" java.lang.SecurityException: this KeyboardFocusManager is not installed in the current thread's context
     at java.awt.KeyboardFocusManager.getGlobalFocusOwner(Unknown Source)
     at java.awt.KeyboardFocusManager.processSynchronousLightweightTransfer(Unknown Source)
     at sun.awt.windows.WComponentPeer.processSynchronousLightweightTransfer(Native Method)
     at sun.awt.windows.WComponentPeer.requestFocus(Unknown Source)
     at java.awt.Component.requestFocusHelper(Unknown Source)
     at java.awt.Component.requestFocusHelper(Unknown Source)
     at java.awt.Component.requestFocus(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.requestFocus(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMousePressed(Unknown Source)
     at oracle.ewt.lwAWT.AbstractButton.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.button.PushButton.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp._redispatchEvent(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Disp.mousePressed(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEventImpl(Unknown Source)
     at oracle.ewt.event.tracking.GlassMouseGrabProvider$Proxy.processEventImpl(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
     at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
I am able to dispose the messagebox, when I configure the oracle form with Jinitiator, the issue happens only with JRE.
These are the configurations I use.
10g Release2
Windows XP Professional Version 2002, Service Pack 3
IE version 6.0.2900.5512.xpsp_sp3_gdr.090804-1435
JInit-JInitiator 1.3.1.22, Sun JRE- 1.6.0_17
I am working on Developer suite.
Privilege: Windows Administrator
Kindly guide.
Thanks & Regards
Sunil

Hi Sunil,
Did you ever find a fix for this problem?
I'm having exactly the same issue.
I have an oracle form with a java bean that runs against J Initiator 1.3.1.28, and it works fine, with J Initiator. The java code was compiled against JDK 1.3.
My form now uses the Sun JRE 1.6, update 16. I've recompiled the java code against JDK 1.6.
And now when the java code sends an event to the form and I show an alert I get the same error you were getting:
Exception in thread "AWT-EventQueue-2" java.lang.SecurityException: this KeyboardFocusManager is not installed in the current thread's context.
I recompiled the java code against JDK 1.3, and ran it through the Sun JVM 1.6, and I still get the error.
Any idea how to fix this?
Regards,
Chris.

Oracle Forms Architecture using Websphere AS

My company wish to migrate to the latest version of Oracle forms (currently 10.1.2 (10gr2) ) from v5 and v6. I understand that the first step is to migrate v5 to v6, then we can move from v6 to v10.
My question is actually regarding the forms architecture we are looking to implement. We are to purchase new WinTel servers (IBM x3550 rack servers) and my senior manager is "directing" me towards using Websphere as the application server. What experience do people have of running Forms with Websphere (as opposed to Oracle Application Server or Apache/Tomcat/mod-jk)? How easy (or not) is the configuration of forms to work with Websphere? Are there any "gotchas" to be aware of?

Hi,
I don't know nothing about Websphere, but I did the same thing for BEA WebLogic Server a while ago, that is install and run Forms without using OAS.
It took me about one month to get it running, with most of the time spent on figuring out how BEA WebLogic (or any J2EE compliant server) works, how forms server works and what to put where. And to figure out, which parts (i.e .jar-files) are needed by the applet and which ones by the servlets, since oracle installs them all into the same directory (forms\java).
Things to look out for or be aware of:
- you still must install Oracle Application Server Forms + Reports Services (you just don't run the server tools or daemons then, and even can delete them from your disk)
- you still need a licence for OAS!
- some addons like SingeSignOn or Load Balancing may not work , or at least be more difficult to integrate
hope that helps
Volker

Running Oracle forms 9i using java plug in 1.4.x

Hi,
i want run my forms (9i) using java plug in 1.4.x? could u plz tel me what are changes i have to do in formsconfig and in other places.

Thanks for the reply.
I am using Webutil 1.06 an jacob 1.8 with Oracle forms 9iDS (9.0.2.9 version)
i have gone through, step by step as u said,
but form is not running.. i am able to run the form using java-plug-in (1.4.2.)
but when i am implenting with webutil, form is not running...
as i studied the links given by u, in that webutil is compatible with only from 10g.
if so, which is the compatible webutil version for Oracle forms 9iDS (9.0.2.9 version).
My actual goal is to store a file (it may be .doc, .pdf, .xls, .ppt) in the database and retrieving through forms..
and also suggest me if there is any other ways to do it..
plz suggest me..
Naresh.P

Can Oracle forms be used for offline screens

I need to address a business requirement to
provide offline screens.Is it possible to provide these using Forms on client sites who are not connected to the net.
The files produced by the Forms are to be sent remotely to a server at a fixed time using some middleware
Basically,can we have Oracle forms running
without Oracle Forms server?

hey there!
i really am looking for the solution of this question myself if anybody know the solution plz let me know
thanx in advance
JAS

Oracle Forms run with Sun Java Plugin

Hello,
I have a machine which does not have Mozilla. But i wanna run the forms in Google Chrome, not IE. I installed JInitiator (the final version), but when i run the form i still got in Chrome that there are missing plugins.
I should mention that i just installed Dev Suite 10gR2 and i did not change anything in forms configuration files.
What should i change and where?
Thanks

Hi,
from
[http://fdegrelle.over-blog.com/article-4135746.html|http://fdegrelle.over-blog.com/article-4135746.html]
- Prepare your /forms/server/formsweb.cfg file
instead of the archive_jini tag, use the archive tag
archive=frmall.jar,...,my_jar.jar
add a special section (including the Webutil configuration)
[javaplugin]
baseHTMLJInitiator=webutiljpi.htm
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_09/index.html
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4-windows-i586.cab#Version=1,4,0,0
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
If you don't use the Webutil library, point to the basejpi.htm start page:
baseHTMLJInitiator=basejpi.htm
- Configure the Forms Builder to use this section:
Menu : Edit -> preferences...
tab : runtime
item : Application server url : http://my-machine:8890/forms/frmservlet?config=javaplugin
Then run your forms !
regards

How to insert multiple rows in oracle forms when using TEMPLATE FORM

I got a case study on PO creation nd in that I have to insert multiple rows in form especally when PO creation screen is there.
I tried by different syntaxes but its not working.I need correct syntax to insert the multiple rows in to the table in oracle forms

Please Oracle EBS queries on EBS forums.

"Slow Oracle Forms 10gR2 using Sun's JRE on Windows 7 x64 laptop

Similar Messages

Maybe you are looking for