Slow PS3 Connection on WRT300N

Hi,
I have just added a PS3 to my wireless network, but the connection is really slow;
Has anybody had any experience with similar problems? 

Open router set up page using http://192.168.1.1  .......  you will see username & password screen ...... leave  username blank & in password use admin.........
Look for MTU .......change the size to 1365 ...... click save settings .....
Click on security ....... uncheck "Filter Anonymous internet request" .......click save settings....

Similar Messages

  • Ps3 connectivity is very slow

    what do i do, i have my ps3 connected to my router via wireless and i lag extremely bad when i play online. the signal strength is 50%. how do i get rid of the lag?

    if changing the MTU size to 1400 doesn't make any difference , try changing it to 1365.
    if you do not know how to access the router's web interface you can refer to this link

  • Unbearably slow Internet connection using WDS network

    We have an old Airport Extreme (saucer, 802.11b/g) and an Airport Express (802.11n, b/g compatible). We're using the Extreme as a WDS main, and the Express as WDS relay. Wireless devices that connect to the Internet in our house include a MacBook Pro, a couple of iPhones, an iPod Touch, an XBox 360, and a PS3.
    None of these wireless devices are in direct line of sight to the main base station. Typically, our connection to the Internet is decent for the XBox, which has almost a clear line of sight to the relay (Express) base station. On the other hand, the connection for the MacBook Pro, iPhones, and iPod, is extremely slow. Maybe the actual connection speeds are the same for all devices, but at least for the XBox online gaming works. (Haven't tried online gaming with the PS3 yet.)
    The problem that compelled me to post this thread is the slow Internet connection to our MacBook. When our MacBook Pro is moved from its usual location to a place just a few feet away from the Extreme, download speeds are satisfactory (e.g. 10,000+ kbps measured using Speakeasy.net). However, when we sit farther away from the Extreme and are only a few feet from the Express, download speeds are dismal (200-300 kbps). The Internet connection is noticeably slow; web pages load like molasses, and watching streaming video is almost impossible. Upload speeds are usually about 7-10x faster, which is kind of strange.
    Airtunes is off. We've tried setting up the Express base station as a WDS remote instead of relay, no difference. Allow wireless clients is turned on for both main and relay. Channel 1, WPA2 personal security.
    Part of the problem may be due to the fact that our house is steel framed so, depending on location, the frame of the house may get in the way of our wireless network. But even if the MacBook is within 2 feet of the Express with NO walls or obstacles in between, the speed remains dismal. The line of sight from the Extreme (main) to the Express (relay) is impeded by a few obstacles but little in the way of walls.
    However, if the MacBook is close to the Extreme, with good speeds, then I walk away and sit near the Express, I still get good download speeds. This lasts only a short time. Also, if I turn off Airport on my MacBook Pro and turn it back on again, speeds are back down right away.
    I understand WDS cuts the bandwidth down substantially, so I decided to unplug the Express and just use the Extreme station, set to create a wireless network instead of participate as main in a WDS network. When I do this I get satisfactory speeds on the MacBook Pro, even sitting at a location where I used to get the slow speeds.
    So at first I thought forgetting about WDS completely would seem to be the solution to the problem. That seems to be true for the MacBook, but when the Express is offline and the Extreme is the only base station, the XBox and PS3 now are the devices with a very poor connection to the Internet, as there are 3+ steel framed walls between the base station and the devices. When the WDS network is up, the XBox and PS3 are almost in direct line of sight to the relay station (but then I lose speed on the MacBook and other devices.)
    I'm trying to find a solution that allows a good speed connection for all these devices. Right now I have to choose between a regular network with a good connection for my MacBook, or a WDS network that allows gaming but appears to be worthless for the MacBook.
    Your assistance is most welcome.

    I'm trying to find a solution that allows a good speed connection for all these devices.
    The solution is to run an Ethernet cable from the LAN port on the AirPort Extreme base station (AEBS) to the AirPort Express (AX). Then you won't need to use WDS and you won't suffer the bandwidth penalty of WDS. Then you would configure both the AEBS and AX to create a wireless network using the same SSID (network name) and wireless encryption type/level/password. The AX should be configured to act as a bridge (not sharing a single IP address).

  • My 2007 mac pro has a slow internet connection with lion

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

    Hi:
    I've been dealing with a severely slow internet connection with my 2007 mac pro - dual quad core.  I have os 10.7.3.  I use wifi. 
    Typically, I'll experience difficulty loading websites completely.  Certain sites have a 90% failure rate to load most elements.  Other sites operate quickly from time to time.  Often, a site will simply fail to load at all.  My cable company cannot find anything wrong with my connection and other, newer devices don't have a problem loading sites.  It seems the issue is most likely related to my computer.
    Interestingly, I can usually "jump-start" the connection by turning my wifi connection off and on and this will (temporarily) allow me to get an image or video to download.
    Any ideas?
    Thank you for your time.

  • Windows 7 Ultimate (64-Bit) fresh install, only WLAN and video driver installed but EXTREMELY slow internet connection...

    I recently checked my internet connection on my Asus G53SW and found that it was extremely slow on both the LAN and WLAN connections. I checked with a different laptop (old HP Pavilion) and I get a steady 74mbps+ connection using the same LAN cable and
    also with the WLAN connection. My ISP has checked their side and everything is fine.
    To try and resolve the issue I tried uninstalling, disabling and tweaking various software and even tried safe mode with networking, all to no avail. I then decided to do a complete fresh install this afternoon. I have installed Windows 7 Ultimate (64 bit)
    successfully onto my SSD and everything went smoothly. I have now only installed Nvidia video drivers and the (only) WLAN driver from the Asus support site.
    My WLAN connection remains incredibly slow (amost half what it is on the HP and my MacBook Pro). Clearly this is an issue with either the Asus laptop or Windows but I don't know how to proceed in order to eliminate which it could be other than to try a different
    o/s to W7-Ult.
    Can anyone help who knows more about this than me? Perhaps someone who has had a similar or the same problem because this is giving me a severe headache!
    Thanks in advance to all and for any advice.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

    Thank you for responding. As I stated in my original post the reason I went through this process was because of an extremely slow internet connection from both the WLAN and LAN connections on my G53SW. At that time I had all of the correct drivers on the
    machine. Whilst I would agree that with the machine only having a video and WLAN driver it may well not be working 'optimally', the rationale for doing this was to get the machine working with the minimum of processes to show that it was not anti-virsu software,
    Steam or the like causing interference.
    I have changed out both of the HDDs this evening (a primary SSD and a secondary 1Tb HDD) for a clean hybrid 1Tb Seagate drive. Once I have installed all of the Asus drivers (and nothing else) I will try the speed test again and report back.
    I can now report that with a fresh install of Windows 7 Ultimate SP1 and ONLY Asus drivers as supplied the issue remains. On a connection where I should see around 75mbps I am actually getting around 18mbps, sometimes considerably slower. This only affects
    my Asus machine.
    <script id="ncoEventScript" type="text/javascript">function DOMContentLoaded(browserID, tabId, isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) { object.DOMContentLoaded(browserID,
    tabId, isTop, url);} }; function Nav(BrowserID, TabID, isTop, isBool, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.Nav(BrowserID, TabID, isTop, isBool, url); }; function NavigateComplete(BrowserID, TabID,
    isTop, url) { var object = document.getElementById("cosymantecnisbfw"); if(null != object) object.NavigateComplete(BrowserID, TabID, isTop, url); } function Submit(browserID, tabID, target, url) { var object = document.getElementById("cosymantecnisbfw");
    if(null != object) object.Submit(browserID, tabID, target, url); }; </script>

  • My macbook pro 13in is slow to connect

    Hello,
    My Macbook pro is slow to connect to the internet, even though the wifi is at all five bars. This happens at my home, and sometimes at work. At work, the internet is at all five bars, and everyone else's macbook, macbook air, pc connects fine, but mine does not. Can someone help me?

    Hello anashakeka,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    Learn how to troubleshoot Wi-Fi network connectivity issues on your Mac.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Slow VPN Connection

    I have had Windows Server 2012 Essentials setup and running now for over 12 months and have been using the Remote Web Access to share certain files with our employees. When using the RWA you can download files in seconds without issue.
    I recently wanted to setup a VPN connection to the server so that I could remote manage the server if needed rather than have to go to the office all the time. I added the role on the server, forwarded port 1723 as needed whilst at the office. Then at home
    created a VPN connection on my Windows 7 PC. The VPN connects very quickly without issue but when trying to do anything the lag is very slow. On the laptop I used the cmd prompt so I could ping the server to see what was going on, i get a lot of time outs
    when doing anything, even when trying to just open a folder that is also shared by RWA and opens without issue.
    If i use Remote Desktop it just constantly times out and closes, so cant do anything.
    It appears this is just a VPN issue as RWA works perfectly. Any ideas as to what would cause this?

    Hi,
    Regarding the current issue, I suggest we could refer to the following similar thread to see if it helps. Please follow the suggestions Tiger provided in the thread.
    Slow VPN Connection to Windows Server 2008
    http://social.technet.microsoft.com/Forums/en-US/3e68223a-26d8-4f39-a476-e7092c44afd9/slow-vpn-connection-to-windows-server-2008?forum=winserversecurity
    In addition, here is an article about how to troubleshoot VPN slowness issue.
    Why is something so slow over a VPN connection?
    http://projectdream.org/wordpress/2007/03/20/why-is-something-so-slow-over-a-vpn-connection/
    Hope it helps.
    Best Regards,
    Andy Qi
    Andy Qi
    TechNet Community Support

  • Slower internet connection when connection wireless network

    Currently using a Linksys WRT54GL wireless broadband (firmware v4.30.5) router in conjunction with a Thomson Speedtouch 546i ADSL router (ISP provided).
    My problem is that when I connect to the internet over the wireless network I experience a much slower internet connection in comparison with when I use a tp-cable.
    Tested with various online "speed-tests" (I know they are not to be trusted, but they do give a basis for comparison):
    Over wireless network : ca.6000kbits/sec.
    Direct cable from pc to router (tested on both routers):12-13000kbits/sec.
    Hope anyone has any idea what the problem may be, and any help is greatly appreciated.

    Change the beacon to 50 ....and reduce the RTS and the fragmentation by 40 each.....these options are found under the advanced wireless settings...
    Also make sure that u have the latest drivers installed for the Wireless NIC.

  • WiFi *really* slow to connect on wake

    I recently moved to a new neighborhood and now my wifi is really slow to connect when I open up my MacBook from sleep mode.
    My old place had other networks in the vicinity, but about half as many as there are available at my new place.
    Either way, its really becoming a pain, as I have become very used to opening my MacBook and being instantly online.
    I have power cycled my router and modem and done everything short of resetting the firmware.
    I am using a standard Linksys WRT-54G and it's served me fine for years, as has this MacBook.
    Any ideas on how to remedy this?
    Nejat
    Message was edited by: nugx

    How long is this "really slow"? Several minutes?
    You may want to look through System Preferences>Network and take a look at the "advanced" options for Airport. Might be worth clearing out all preferred networks and get those reset.
    ~Lyssa

  • Slow Wireless Connection

    I am having problems with a very slow internet connection, that seems to be getting slower.
    Currently we have a DSL Modem connected to a LinkSys DSL Router connected to an Airport Extreme. We have been using this setup for several years.
    We run 2-4 laptops of various types...MacBook, MacBook Pro, and 1 Windows. Today, I can hardly get my MacBook to go anywhere.
    I went up to my iMac G5 and plugged in the ethernet directly to a port in the router and did a DSL speed test through my ISP and it came back as 4.4 Mbps, about the same as it has since I upgraded speeds last fall.
    I then disconnected the ethernet and switched back to wireless, and ran the same test. This time is came back 775 Kbps.
    Any suggestions? Thanks!

    I am assuming that you are still having the issue with network performance, or at least it has not stabilized.
    I would still think Wi-Fi interference to be the potential issue and suggest that you pursue this a bit farther ... if you don't mind.
    Again, I would suggest downloading a copy of iStumbler. Use iStumbler's Inspector feature (select Edit > Inspector from iStumbler's menu) to determine the Signal-to-Noise Ratio (SNR) at different points around your house, by performing a simple RF site survey. Within the Inspector, note the values for "signal" & "noise" at these locations. Start with your MacBook near the base station, note the readings, and then, choose the locations where you will typically use your MacBook to access the Internet.
    SNR is the signal level (in dBm) minus the noise level (in dBm). For example, a signal level of -53dBm measured near an access point and typical noise level of -90dBm yields a SNR of 37dB, a healthy value for wireless LANs.
    The SNR, as measured from the MacBook, should decrease as the range to the base station increases because of applicable free space loss. Also an increase in RF interference from microwave ovens and cordless phones, which increases the noise level, also decreases SNR.
    SNR Guideline
    o 40dB+ SNR = Excellent signal
    o 25dB to 40dB SNR = Very good signal
    o 15dB to 25dB SNR = Low signal
    o 10dB to 15dB SNR = Very low signal
    o 5dB to 10dB SNR = No signal
    If the SNR is 20dB+ at each of these locations, then you should be getting reasonable performance from your AirPort. If less, either try to locate the source of the Wi-Fi interference or try relocating either the base station or the wireless clients until they are within a 20dB SNR range.

  • Very slow to connect to apex 4.1

    i have installed apex 4.1 on port 7777
    and sometimes resul very slow to connect.
    someone know i i can resolve the probelm ??

    We have approximately the same problem, sometime APEX 4.1 is very slow. But we haven't change the default port.

  • If you have an Airport Extreme router and a slow Internet connection ...

    I know that Internet connection speeds are extremely variable, but I wanted to share this post for anyone having performance problems (very slow Internet connection speeds) while using an Airport Extreme router. This may or may not help you, but it might help someone.
    I have a RoadRunner Turbo account, and I was experiencing consistently slow Internet download speeds (an average of only about 300KB/sec). However, when I bypassed my router and connected my Mac directly to the Time Warner modem my download speeds were 6 to 8 times faster (up to about 2MB/sec).
    After weeks of tinkering and reading Apple documents I discovered that my Airport Extreme router had an improper setting. That setting is found under: Manual Setup -> Internet -> Internet Connection -> Ethernet WAN Port. When I was experiencing the very slow speeds, my Ethernet WAN Port setting was: '100 Mbps/Full Duplex.' To fix the problem I simply changed this to 'Automatic (Default).'
    This one change resulted in a huge, positive performance boost for me. I hope this post helps other people.

    You use an App like Filebrowser.  Details here:
    http://www.stratospherix.com/products/filebrowser/

  • How to install Lion on Mac with slow internet connection.

    My father's Mac mini has a slow internet connection.  I always update it by taking the update packages that I download on my iMac to his machine.  Will I be able to do that with 10.7 (Lion) when it is purchased/downloaded from the Mac App Store?

    It seems that Apple's license terms will allow that across Macs that share the same App Store ID, but I doubt that's the case with you and your father.  Physically the update package for Lion could be moved, but the licensing issues will have to be worked out.  You're not the only person who's concerned with the issue of how to download a 4 GB file for Lion.

  • How to download adobe products without adobe download manager. I am on the slow internet connection

    how to download adobe products(e.g lightroom) without adobe download manager. I am on the slow internet connection. The adobe download manager ask me that download will finish after 24 hours.

    You can get all the download links to software updates back many years by going to:
    www.adobe.com/downloads/updates/ and choosing your software product in the dropdown list at the top and clicking Go.  This should lead to a page of updates going back in time.  It doesn’t have the .0 versions because those require payment, but the .1-.n free updates to the .0 version s are there.
    You can also get beta software downloads by going to:
    http://labs.adobe.com/

  • Ethernet slow to connect after waking from sleep

    Since installing Lion (and updating to 10.7.1) on my 2008 24" iMac I have noticed that after waking from sleep the internet connection takes about 10 seconds to restore. I have reset the SMC and PRAM and performed a safe boot (in case this helped) but to no avail. The slow conenction can be observed if after waking from sleep the Network System Preference is clicked and the ethernet status "light" is red, changes briefly to amber and then green indcating a connection. The iMac is connected via an ethernet cable to a Linksys 802.11n 4 port wireless router.
    I also have a 2010 13" MacBook Pro, with the same OS, and version, conencted in the same way to the same Linksys router and it does not exhibit this problem.
    This slow internet connection access after waking from sleep is an annoyance and I'd appreciate any input on how to elimnate it.
    Thanks to those wiser than I, who might read this note.

    SOLUTION FOUND!
    I've found a list of possible solutions here's the link:
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    I solved my problem moving the Ethernet and WiFi adapters in the top of the list and Bluetooth at the end.
    Move Wi-Fi to the top of the Service Order list – This is an old tip that simply prioritizes WiFi as the primary method that your Mac should connect to the internet, and it seems to help maintain connections

Maybe you are looking for

  • Restrict number of rows in table view

    Can a table view has only as many rows as the actual rows in the underlying data structure. Actually, I have a table view with less than 5 rows, but the tableview shows like 15+ rows with the rest of the rows as blank(alternative colors for each empt

  • OAS 10.1 3.1 0 OC4J JDBC Connection/Timeout settings

    I am fairly new to OAS, and am trying to resolve a intermitent issue, I have an OAS 10.1.3.1.0 with a deployed EAR file I was provided by a supplier containing mainly PL/SQL based logic, which configured the OAS to ask a middle tier for a an external

  • Jpeg export output is 'smudgy' vs Lr develop display

    Hello Gang - I've been blaming smudged output on facebook & Flickr - but now I've seen the true culprit ! My Jpeg export output is quite 'smudgy' vs the Develop display - and even when I use export "Email" default it is still smudgy while the Develop

  • Sub menu question

    How do I create verticle sub menus that when navigated over expand in the current menu.  I have only found options that display sub menus on top of the other main menu options. http://www.agrability.okstate.edu/  This is the site I am working on, I a

  • USING ALV PUSH BUTTONS

    I am working on ALV PUSH BUTTONS. When I am clicking the button  some records in an internal table is displayed in ALV. Each column is repeated twice for the first time and on the second time it is working fine.What is the reason and what I have to d