Slow runtime with Xcelsius

Hi Experts,
Happy new year~
Here's my problem with Xcelsius enterprise 2008 runtime. I just use its embedded Excel as data source. For raw data part, there are about 3 worksheets, 1000+ rows in every sheet. As for formula, i use vlookup/If such easy funtions.
but both in preview and exported file, it need to take 5+ sec to respond when clicking a button.
Is this normal? Is there any better solution?
Thank you all in advance.
Br,
Joey

Hi Stratos,
thank you so much for your advices and quich response.
i've tried times on other PC, actually my colleagues and I are facing the same problem.
as for upgrade to SP3, i'll try it these days.
Have a nice day~
Br,
Joey

Similar Messages

Extremely slow performance with Radeon HD 7870

Hi,
I am using a number of Adobe programs on my new Windows 8 64 bit system, with 16 gigs of ram, an Intel Core i5 2.67ghz, and AMD Radeon HD 7870 2 gig. All the programs (including After Effects and Illustrator) work very well with the exception of Photoshop CS6 64 bit, which has extremely slow performance with Use Graphics Processor enabled in my preferences (which Photoshop selects by default). If I turn off Use Graphics Processor, the slow performance vanishes. If I change Drawing Mode to Basic, there might be a slightly detectable improvement over Normal and Advanced, but it's still horribly slow. The refresh rate seems to be just a few frames per second. Everything is slow: brushes, zooming, panning, everything.
I've tried changing the settings I've seen suggested elsewhere: I switched Cache levels to 2, history states to 10, and tile size to 128k. No effect. Photoshop is currently at the default of using 60% of available ram. Efficiency has remained at 100% throughout all my tests. Also, this slow performance has affected me from the moment I installed Photoshop; it didn't crop up after previous good performance. The problem exists regardless of the size or number of documents I have open. Performance is still terrible even when I create a 500 x 500 pixel blank new canvas and try a simple task like drawing with the brush.
Photoshop is fully up to date, and so are my graphics drivers (Catalyst version 13.1). Any help would be greatly appreciated; at the moment performance is so bad in Photoshop that it's unusable with graphics acceleration enabled. Thanks in advance for replying.
Photoshop System Info:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13443 MB
Memory available to Photoshop: 14697 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 2
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 1.2 AMD-APP (1084.4)
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 9.12.0.0
Driver Date: 20121219000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
Serial number: 90970078453021833509
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Temporary file path: C:\Users\RAFFAE~1\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.5G, 534.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   ACE.dll   ACE 2012/06/05-15:16:32   66.507768   66.507768
   adbeape.dll   Adobe APE 2012/01/25-10:04:55   66.1025012   66.1025012
   AdobeLinguistic.dll   Adobe Linguisitc Library   6.0.0
   AdobeOwl.dll   Adobe Owl 2012/09/10-12:31:21   5.0.4   79.517869
   AdobePDFL.dll   PDFL 2011/12/12-16:12:37   66.419471   66.419471
   AdobePIP.dll   Adobe Product Improvement Program   7.0.0.1686
   AdobeXMP.dll   Adobe XMP Core 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPFiles.dll   Adobe XMP Files 2012/02/06-14:56:27   66.145661   66.145661
   AdobeXMPScript.dll   Adobe XMP Script 2012/02/06-14:56:27   66.145661   66.145661
   adobe_caps.dll   Adobe CAPS   6,0,29,0
   AGM.dll   AGM 2012/06/05-15:16:32   66.507768   66.507768
   ahclient.dll    AdobeHelp Dynamic Link Library   1,7,0,56
   aif_core.dll   AIF   3.0   62.490293
   aif_ocl.dll   AIF   3.0   62.490293
   aif_ogl.dll   AIF   3.0   62.490293
   amtlib.dll   AMTLib (64 Bit)   6.0.0.75 (BuildVersion: 6.0; BuildDate: Mon Jan 16 2012 18:00:00)   1.000000
   ARE.dll   ARE 2012/06/05-15:16:32   66.507768   66.507768
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/12/16-15:10:49   66.26830   66.26830
   AXEDOMCore.dll   AXEDOMCore 2011/12/16-15:10:49   66.26830   66.26830
   Bib.dll   BIB 2012/06/05-15:16:32   66.507768   66.507768
   BIBUtils.dll   BIBUtils 2012/06/05-15:16:32   66.507768   66.507768
   boost_date_time.dll   DVA Product   6.0.0
   boost_signals.dll   DVA Product   6.0.0
   boost_system.dll   DVA Product   6.0.0
   boost_threads.dll   DVA Product   6.0.0
   cg.dll   NVIDIA Cg Runtime   3.0.00007
   cgGL.dll   NVIDIA Cg Runtime   3.0.00007
   CIT.dll   Adobe CIT   2.1.0.20577   2.1.0.20577
   CoolType.dll   CoolType 2012/06/05-15:16:32   66.507768   66.507768
   data_flow.dll   AIF   3.0   62.490293
   dvaaudiodevice.dll   DVA Product   6.0.0
   dvacore.dll   DVA Product   6.0.0
   dvamarshal.dll   DVA Product   6.0.0
   dvamediatypes.dll   DVA Product   6.0.0
   dvaplayer.dll   DVA Product   6.0.0
   dvatransport.dll   DVA Product   6.0.0
   dvaunittesting.dll   DVA Product   6.0.0
   dynamiclink.dll   DVA Product   6.0.0
   ExtendScript.dll   ExtendScript 2011/12/14-15:08:46   66.490082   66.490082
   FileInfo.dll   Adobe XMP FileInfo 2012/01/17-15:11:19   66.145433   66.145433
   filter_graph.dll   AIF   3.0   62.490293
   hydra_filters.dll   AIF   3.0   62.490293
   icucnv40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   icudt40.dll   International Components for Unicode 2011/11/15-16:30:22    Build gtlib_3.0.16615
   image_compiler.dll   AIF   3.0   62.490293
   image_flow.dll   AIF   3.0   62.490293
   image_runtime.dll   AIF   3.0   62.490293
   JP2KLib.dll   JP2KLib 2011/12/12-16:12:37   66.236923   66.236923
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   LogSession.dll   LogSession   2.1.2.1681
   mediacoreif.dll   DVA Product   6.0.0
   MPS.dll   MPS 2012/02/03-10:33:13   66.495174   66.495174
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcp100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   msvcr100.dll   Microsoft® Visual Studio® 2010   10.00.40219.1
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6910
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.1
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS6   CS6
   Plugin.dll   Adobe Photoshop CS6   CS6
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   3.0.0.383
   PSArt.dll   Adobe Photoshop CS6   CS6
   PSViews.dll   Adobe Photoshop CS6   CS6
   SCCore.dll   ScCore 2011/12/14-15:08:46   66.490082   66.490082
   ScriptUIFlex.dll   ScriptUIFlex 2011/12/14-15:08:46   66.490082   66.490082
   svml_dispmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   12.0
   tbb.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   tbbmalloc.dll   Intel(R) Threading Building Blocks for Windows   3, 0, 2010, 0406
   updaternotifications.dll   Adobe Updater Notifications Library   6.0.0.24 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   6.0.0.24
   WRServices.dll   WRServices Friday January 27 2012 13:22:12   Build 0.17112   0.17112
Required plug-ins:
   3D Studio 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Accented Edges 13.0
   Adaptive Wide Angle 13.0
   Angled Strokes 13.0
   Average 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Bas Relief 13.0
   BMP 13.0
   Camera Raw 7.3
   Chalk & Charcoal 13.0
   Charcoal 13.0
   Chrome 13.0
   Cineon 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Collada 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Color Halftone 13.0
   Colored Pencil 13.0
   CompuServe GIF 13.0
   Conté Crayon 13.0
   Craquelure 13.0
   Crop and Straighten Photos 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Crop and Straighten Photos Filter 13.0
   Crosshatch 13.0
   Crystallize 13.0
   Cutout 13.0
   Dark Strokes 13.0
   De-Interlace 13.0
   Dicom 13.0
   Difference Clouds 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Diffuse Glow 13.0
   Displace 13.0
   Dry Brush 13.0
   Eazel Acquire 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Embed Watermark 4.0
   Entropy 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Extrude 13.0
   FastCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fibers 13.0
   Film Grain 13.0
   Filter Gallery 13.0
   Flash 3D 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Fresco 13.0
   Glass 13.0
   Glowing Edges 13.0
   Google Earth 4 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Grain 13.0
   Graphic Pen 13.0
   Halftone Pattern 13.0
   HDRMergeUI 13.0
   IFF Format 13.0
   Ink Outlines 13.0
   JPEG 2000 13.0
   Kurtosis 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Lens Blur 13.0
   Lens Correction 13.0
   Lens Flare 13.0
   Liquify 13.0
   Matlab Operation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Maximum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mean 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Measurement Core 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Median 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mezzotint 13.0
   Minimum 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   MMXCore Routines 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Mosaic Tiles 13.0
   Multiprocessor Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Neon Glow 13.0
   Note Paper 13.0
   NTSC Colors 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Ocean Ripple 13.0
   Oil Paint 13.0
   OpenEXR 13.0
   Paint Daubs 13.0
   Palette Knife 13.0
   Patchwork 13.0
   Paths to Illustrator 13.0
   PCX 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Photocopy 13.0
   Photoshop 3D Engine 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Picture Package Filter 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Pinch 13.0
   Pixar 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Plaster 13.0
   Plastic Wrap 13.0
   PNG 13.0
   Pointillize 13.0
   Polar Coordinates 13.0
   Portable Bit Map 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Poster Edges 13.0
   Radial Blur 13.0
   Radiance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Range 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Read Watermark 4.0
   Reticulation 13.0
   Ripple 13.0
   Rough Pastels 13.0
   Save for Web 13.0
   ScriptingSupport 13.1.2
   Shear 13.0
   Skewness 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Smart Blur 13.0
   Smudge Stick 13.0
   Solarize 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Spatter 13.0
   Spherize 13.0
   Sponge 13.0
   Sprayed Strokes 13.0
   Stained Glass 13.0
   Stamp 13.0
   Standard Deviation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   STL 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Sumi-e 13.0
   Summation 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Targa 13.0
   Texturizer 13.0
   Tiles 13.0
   Torn Edges 13.0
   Twirl 13.0
   Underpainting 13.0
   Vanishing Point 13.0
   Variance 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Variations 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Water Paper 13.0
   Watercolor 13.0
   Wave 13.0
   Wavefront|OBJ 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   WIA Support 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   Wind 13.0
   Wireless Bitmap 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00)
   ZigZag 13.0
Optional and third party plug-ins:
   DAZ Studio 3D Bridge 12.0
   DazUpdateScene 12.0
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
Installed TWAIN devices: NONE

Great news!
I followed your suggestion, Noel, and uninstalled my drivers with the Catalyst Uninstall Utility (which I hadn't used before), rebooted, reinstalled Catalyst 13.2 Beta 7, rebooted, deleted the PS Prefs, started PS, and now the performance is radically improved!
It baffles me why I would need to do a clean driver uninstall in a new system environment that has only ever had this video card, and is only a few months old, but that action seems to be what's improved the situation. Note that because I deleted the PS preferences, the good performance now occurs with the default Use Graphics Processor enabled, and Drawing Mode set to Advanced (with every feature in the Advanced dialog checked except 30bit display).
Having no reference point, I can't tell for sure if performance is as good as it theoretically ought to be for my system specs, but using the standard 13px brush is only slightly laggy behind the cursor, even if I become reckless and squiggle on the canvas violently. It wasn't just sluggish response before: Photoshop seemed to be in pain trying to draw the line segments as it laboured to catch up to the cursor. That is pretty much gone now.
Much more tellingly, zooming and panning the canvas is like it ought to be, responsive and clean, more or less like it was for me in CS4 with my old Nvidia 9600GT. The poor performance with zooming and panning was the most worrying aspect of the issue. It's a great relief to see these working more properly now.
I have to confess I'm a little embarrassed to have drug you through all this hassle only to discover that something as rudimentary as properly cleaning out the drivers would be the apparent solution. I never would have imagined that doing that, with such a new and stable system, would make any difference, since I don't have a legacy of older drivers dotting my hard drive. In any event, I'm really grateful that you guys took the time to try to help me.
In the interest of completeness, here's the relevant portion of my system info after doing the reinstall steps I mentioned above:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x64
Operating System: Windows 8 64-bit
Version: 6.2
System architecture: Intel CPU Family:6, Model:14, Stepping:5 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 4
Processor speed: 2665 MHz
Built-in memory: 16379 MB
Free memory: 13680 MB
Memory available to Photoshop: 14695 MB
Memory used by Photoshop: 60 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenCL Version: 3.0
OpenGL Version: 3.0
Video Rect Texture Size: 16384
OpenGL Memory: 2048 MB
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: AMD Radeon HD 7800 Series
Display: 1
Display Bounds: top=0, left=0, bottom=1080, right=1920
Video Card Number: 2
Video Card: AMD Radeon HD 7800 Series
Driver Version:
Driver Date:
Video Card Driver: aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidxx64.d ll,atidxx64.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: AMD Radeon HD 7800 Series
Video Card Memory: 2048 MB
Video Card Number: 1
Video Card: Microsoft Basic Render Driver
Driver Version: 12.100.17.0
Driver Date: 20130226000000.000000-000
Video Card Driver:
Video Mode:
Video Card Caption: Microsoft Basic Render Driver
Video Card Memory: 0 MB
As you can see, the Microsoft Basic Render Driver still appears as a Video Card in the list. This presumably has something to do with Windows 8, and I really don't know if its presence here is still a sign that my card is not being used to its optimal capability. I have a hunch that the slight lag that I am still experiencing with the brush when Use Graphics Processor is on -- totally absent with the acceleration turned off -- implies that Photoshop is still unable to take maximum advantage of my card. I would assume that the brush tool should be more responsive with acceleration on than off, in a rig without any issues, but that's just assumption on my part. If you turn off Use Graphics Processor on your systems, is the brush tool more or less responsive?
But again, panning the canvas with the hand tool is now extremely responsive, without any screen tearing or visible lag, and that's a massive improvement over the total meltdown of performance I was suffering from before.
Thanks again very much for your help. I'm grateful to all of you who took the time to chime in.

SSO doesn't work with Xcelsius using QAAWS, outside Infoview

Hi,
We have some xcelsius dashboards using QAAWS to retrieve data from database
I would like to know whether SSO works with xcelsius dashboards using QAAWS outside infoview.Currently we get login screen to enter username/password.we are using Windows AD as the authentication type in the environment.

You got it right. Within the InfoView, your Xcelsius-swf gets the CELogonToken as a parameter field to authenticate against the data for example. If you access another Xcelsius-Dashboard from within a swf you can even pass the LogonToken on.
Using dashboard and QaaWS outside of InfoView, the user will have to enter username and password before the data is fetched. At least that is the way it works here.
Regards,
Peter

Slow Performance with Business Rules

Hello,
Has anyone ever had slow performance with business rules? For example, I attached a calc script to a form and it ran for 20 seconds. I made an exact replica of the calc script in a business rules and it took 30 seconds to run. Also, when creating / modifying business rules in EAS it takes a long time to open or save or attach security - any ideas on things to improve this performance?
Thanks!

If you are having issues with performance of assigning access then I am sure there was patch available, it was either a HSS patch or planning patch.
Cheers
John
http://john-goodwin.blogspot.com/

Mac mini slow speed - with pauses

My Mac Mini crashed and I had to reinstall.
Now it runs partly very slow, even with pauses, where I have to wait for responses.
Start-up takes long minutes.
System profiling tools says HD activity reaches a max of 8MB/s.
CPU workload looks far below 100%.
Is there any experience with this?
How can I check and find out more precise the reason for slowing down?
Mac Mini: 4GB 1067 MHz DDR3 RAM, 500 GB HD, 2,66 GHz Intel Core 2 Duo, OS X 10.7.2 everything updated

As per the reply to your other post with the same question:
This is not something to worry about or be concerned with. Firstly, the paging counts will depend on how long the system has been running since the last boot, but MacOS is designed to actively page out and in, so in itself, the fact your system shows it is doing so means nothing at all.
If your computer is exhibiting some indication of a problem, I suggest you start a new thread here and describe what you are experiencing. That way we can help you directly with the specifics of your problem. On the other hand, if you have just seen the comments regarding paging and system performance and have checked your own Mac to see what it's doing - the answer is that in the absence of an indication of a problem, it's very likely doing exactly what it ought to be doing!

Anyone aware of SPC Charting capabilities with xCelsius?

I am very interested in being able to create SPC (Statistical Process Control) charts with xCelsius. Anyone know of an add-on? Anyone want to make an Add-on for xCelsius?
SAP Lighthammer, now SAP XII, does a great job creating SPC charts. But we want to move towards xCelsius yet SPC Charting is used heavily across all functions of the corporation.

Hi, Jeff
Check addon markeplace - https://information.ondemand.com/istore/#shopby=Marketplace/Xcelsius%20Add-Ons%20(All).
If you don't find right component, you can contact me. I can give you a contact of my friend who is Adobe Flex developer.
Maybe he will develop required component for you.
Pavel

Setting up BusinessObjects Enterprise 3.1 for Single Sign On with Xcelsius

Hi all
Does anyone have any documentation and/or whitepapers that documents the setting up BusinessObjects Enterprise 3.1 for Single Sign On with Xcelsius Dashboards (xcelsius accessing BusinessObjects universe data through QAAWS and Live Office..
Thank you for your help.
Kind regards,
Dean

Based on the replies in this thread I'm guessing that there is someone out there that has gotten SSO to work with Xcelsius? If so could you please post the details of how that was achieved?
When we purchased Xcelsius we were under the impression that it supported SSO but have never been able to get it to work and finally had SAP tell us that Xcelsius did not support SSO.
Our understanding is that in order to bypass a login for Xcelsius you have to use QaaWS as the datasource and hardcode an enterprise id and password.
LiveOffice supports SSO but not when it's used as a datasource within Xcelsius.

Can Xcelsius Enterprise integrate w/ Sharepoint 2007 with Xcelsius Webparts

Hi,
Our organization is thinking about investing in Xcelsius Enterprise. We have Crystal Reports 2008 and Sharepoint 2007 running. Can Xcelsius enterprise connect to both and can I implement a realtime dashboard on Sharepoint 2007. I'd like to create a dashboard in Xcelsius and publish it to Sharepoint 2007 as a swf file and have the flash object updated automatically. Can someone confirm that Xcelsius enterprise will work? Will it do it through webparts? Also can I duplicate the same dashboard on Crystal Reports 2008 InfoView site? The dashboard on Sharepoint would be mutlipaned and have some KPI's if I can set them up against the dashboard information.
Thank for your help.
Dominic

Anyone? I can't believe no one has tried this with Xcelsius Enterprise?

Packaging AIR runtime with app?

Would it be possible to have an option to package the AIR runtime with the APKs
created through Flash Builder? Say, a ride-along package that would detect if the
given or higher runtime of AIR is installed, and if not, install it before launching the
app.
For the foreseeable future (the next year, at least), most new users of any given app
created this way will not already have the AIR runtime on their phone. This would
spare them having to initiate another download when they thought they were about
to enjoy the product. (No matter how you disclaim it, many customers are going to
think you can start an app right away after downloading it from the Market, because
this is how practically all non-AIR apps work.) Waiting for an install is okay if the app
automatically launches afterward: this will not take nearly as long, and (importantly!)
requires no further customer action to actually launch the app.

I'm sure it would possible, but consider that as soon as someone downloads
an AIR Android app, they've already got the runtime, and with notifications
for updates already a common thing, they'll be notified from the Market
whenever there's an app update (runtime or your app).
I think it would be nice as an option, but just today I got an email from
the Android Market explaining important changes to the store, and
specifically they say no .apk larger than 50 mb. So I'd rather not have the
runtime packaged with the app, as that adds to the overall filesize. We
already have to deal with that on iOS devices, since Apple won't let us
download compiled code. So you get an automatic 3-4 mg overhead with all iOS
apps. Luckily there's no real limit on iOS app sizes.
I do agree though it'd be nice to have the install process worked out so the
app prompts for the runtime if needed (as it works now) but have the runtime
know to launch the app again once it's installed.
iBrent

Slow performance with macbook pro retina

Saving an image (JPEG) with my lightning fast new macbook pro 2012 retina edition takes 30-60 seconds. Any ideas why? Mountain lion Mac OS, 8GB RAM. Can't upgrade RAM but shouldn't have to! I moved images to external hard drive since I was filling up memory on laptop quickly. I would appreciate ideas from anyone who knows Elements and Mac . Thanks.

This is my only computer now. Will check into auto analyzer (never heard of it). This is Elements 11, not the whole photoshop. It is the regular, not app version. I did move some of the photos from a past pc to it, but it seems to have the same slow speed with new photos as well. I installed Elements 11 on my mac with a disc. When I bought it, it came with both pc and mac discs. A guy at the apple store had me move all the photos onto my external hard drive. Its a new Apple 3 TB external hard drive. I actually tried to increase the RAM at the suggestion of my camera club friends who had similar problem and got relief with increasing RAM of 4 up to 12 or 16. Mine is 8 and can't be increased.

Very slow scrolling with CS5

I don't know if other people also have this problem, but I noticed an issue which makes Photoshop CS5 completely useless for me: It is scrolling incredibly slow. With CS4 I am able to scroll much faster and with different speeds. In CS5 it seems like the speed is limited. No matter how much I scroll with my mouse, Photoshop keeps scrolling at the same speed.
It seems like it is not only me: The only website concerning this problem I was able to find is:
http://macperformanceguide.com/OptimizingPhotoshopCS5-Issues.html
Unacceptable scrolling speed with center button
I use the scroll wheel in the center of the Apple mouse constantly. In CS5, this functionality is now broken, because CS5 scrolls only a small amount, very different from CS4. There is no apparent work-around.
Reader Joe N agrees:
I saw your posting about CS5 issues, and I want to add another STRONG vote for the Photoshop mouse wheel scrolling speed issue. I use a Magic Mouse, and the scrolling speed is so poor in PS CS5 that it is totally blocking my creative flow. I have scoured the web for a solution and have not found anything yet...
I also use a Magic Mouse and a MacBook Pro with Snow Leopard. Is there any hope of a fix or a workaround?

Thanks so much for replying, Chris. I've just started using CS5 and only used CS4 for a couple of weeks. There are so many variables. and I don't think it's just Photoshop. I'm wondering if the same problems happen in windows 7 (I switched to the Mac the last time I bought a computer.) Probably it's just that everything gets more complicated along with the improvements. : -(
Thanks again,
Peggy

Crystal XI Runtime with Windows 2008 Server

Hi all
We have been using Crystal for many years with our application, distributing Crystal Runtime with it.
We have our own DLL which interacts with Crystal to display a setup screen to get the user to enter values for the parameters within the report and then runs the report.
All works fine except for running on Windows Server 2008. We have Crystal Reports 11.5 and the runtime on the server is also built with the 11.5 merge modules.
Where the application fails is during a call to the TApplication.OpenReport. Windows isn't giving much information apart from an error has occurred.
Can anyone tell me if there is a known issue running under Windows Server 2008 and whether there is a fix.
I have posted in a different forum, but trying here as well. Getting desperate.
Many thanks.
James

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

HT1689 My podcast app started playing all unplayed episodes at slightly slower speed with everything doubled. How do I return it to normal play?

My podcast app started playing all unplayed episodes at slightly slower speed with everything doubled. How do I return it to normal play?

When you're listening to a podcast, slide the current artwork up from the bottom, and you will reveal the control panel. Adjust the little switch in the middle so that it is pointing North, instead of Northwest. That will fix your problem.

Very slow connection with Mifi 4510L??

I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
Brian

I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed

Slow Mac with recurrent spinning ball of doom

Please help,
My Mac has always been slow since I had it and migrated my PC content to my Mac. I have run EtreCheck and hope that this might illuminate the cause of my issues, but worry that it may not. ANYTHING I ask the Mac to do will be slow and inevitably cause a spinning ball for a while. I have kept the system up to date. I have a lot of photos in iPhoto but can't imagine this can be the cause?
Any help is much appreciated. The Etrecheck output is below:
Many thanks.
Problem description:
Slow Mac with poor internet connectivity and recurrent spinning circle of doom
EtreCheck version: 2.1.6 (109)
Report generated 16 January 2015 20:09:37 GMT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 110
Video Information: ℹ️
Intel HD Graphics 4000
Color LCD 1440 x 900
NVIDIA GeForce GT 650M - VRAM: 512 MB
System Software: ℹ️
OS X 10.10.1 (14B25) - Time since boot: 10 days 7:54:28
Disk Information: ℹ️
APPLE HDD ST500LM012 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (226.60 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.EscrowSecurityAlert.plist
[killed] com.apple.icloud.fmfd.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
8 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.periodic-monthly.plist
[killed] com.apple.periodic-weekly.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
[killed] org.cups.cupsd.plist
11 processes killed due to memory pressure
Launch Agents: ℹ️
[running] com.mcafee.menulet.plist [Support]
[running] com.mcafee.reporter.plist [Support]
[loaded] com.oracle.java.Java-Updater.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.bombich.ccchelper.plist [Support]
[invalid?] com.mcafee.ssm.ScanFactory.plist [Support]
[invalid?] com.mcafee.ssm.ScanManager.plist [Support]
[running] com.mcafee.virusscan.fmpd.plist [Support]
[loaded] com.microsoft.office.licensing.helper.plist [Support]
[loaded] com.oracle.java.Helper-Tool.plist [Support]
[running] com.oracle.java.JavaUpdateHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.f-secure.sync.BTCloud.plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Mail Application (/Applications/Mail.app)
BT Cloud Application (/Applications/BT Cloud.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 [Support]
FlashPlayer-10.6: Version: 16.0.0.257 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 16.0.0.257 - SDK 10.6 [Support]
Default Browser: Version: 600 - SDK 10.10
CitrixICAClientPlugIn: Version: 11.1.0 [Support]
SharePointBrowserPlugin: Version: 14.4.7 - SDK 10.6 [Support]
Silverlight: Version: 5.1.30214.0 - SDK 10.6 [Support]
MeetingJoinPlugin: Version: Unknown - SDK 10.6 [Support]
JavaAppletPlugin: Version: Java 7 Update 71 Check version
Safari Extensions: ℹ️
SiteAdvisor [Installed]
3rd Party Preference Panes: ℹ️
Citrix online plug-in [Support]
Flash Player [Support]
Java [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 272.28 GB
Destinations:
My Book [Local]
Total size: 2.00 TB
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Excellent
Backup size 2.00 TB > (Disk size 498.88 GB X 3)
Top Processes by CPU: ℹ️
      6% WindowServer
      1% BT Cloud
      0% ocspd
      0% fontd
      0% AppleSpell
Top Processes by Memory: ℹ️
180 MB Mail
113 MB com.apple.WebKit.WebContent
103 MB BT Cloud
94 MB Safari
77 MB Google Chrome
Virtual Memory Information: ℹ️
41 MB Free RAM
1.18 GB Active RAM
1.16 GB Inactive RAM
918 MB Wired RAM
54.83 GB Page-ins
725 MB Page-outs
Diagnostics Information: ℹ️
Jan 16, 2015, 01:20:19 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-01-16-132019_[reda cted].crash

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of it have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message. See, for example, this discussion.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=({Soft,Hard}ware Memory Diagnostics Power FireWire Thunderbolt USB Bluetooth SerialATA Extensions Applications Frameworks PrefPane Fonts 1024 85 percent 20480 1 MB/s 25000 ports KiB/s DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH 25 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files 4 1000 25 5120 -\\t PlistBuddy{,' 2>&1'}' -c Print' OSBundleRequired 1157 20 ' function f() { n++;sub(/^/,"^");gsub(/\./,"\\.");gsub(/\+/,"\\+");gsub(/\-/,"\\-");gsub(/\?/,"\\?");print|"sort|uniq";};function g(N,d) { if(n<N) print d;};' );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=(\\n%s{:\ ,\\n\\n}%s\\n '\nRAM details\n%s\n' %s\ %s '%s\n'"${p[50]}"'%s\n' '%s (UID %s) is using %s %s' '\nContents of %s\n   '"${p[50]}"'mod date: %s\n   '"${p[50]}"'checksum: %s\n%s\n' '\n   ...and %s more line(s)\n' 'RSSI: %s\nNoise: %s\nTx rate: %s\n' {Privacy,Mode}': %s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("'"${f[5]}"'",$0,u,q,"'${p[$2]}'");} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[46]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[47]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' "${p[56]}"\ ' $0&&!/ /{f()} END{g(10,"^com\.apple\.")} ' ' { sub(/ :/,"");print|"tail -n'${p[48]}'";} ' ' NR==2&&$4<='${p[49]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p;' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&$3!~/0x|\.([0-9]{3,}|[-0-9A-F]{36}|apple\.launchctl\.(Aqua|Background|System))$/ { print $3":"$2;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' "${p[56]}"\ ' /\.(bundle|component|framework|kext|mdimporter|plugin|qlgenerator|saver|wdgt)$/{f()} END{g(900,"^/System/")} ' ' /\.dylib$/!d;s/(\.|\+|\-|\?)/\\\1/g;s/^/^/p;' "${p[56]}"\ ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");f();} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]"\.plist\t"c[i];g(500,"Launch");} ' ' /^\/(Ap|Dev|Inc|Prev)/d;/(ok.+dle|\.(component|mailbundle|mdimporter|plugin|qlgenerator|saver|wdgt))$/p;' 's/Pr.+n //p' ' BEGIN{FS=":"};{ if($1~/\.kext$/) { s=system("'"${p[51]}"'\\ :'${p[53]}' "$1"/*/I*|grep -q Sa");if(!s) $1=$1" S";if(!$2) $2="'"${p[28]}"'";printf("'"${f[4]}"'",$1,$2);} else print;} ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1=="op" {m=$3};$1~"lN" {N=$2};$1~"lR" {S=$2};$1~"Tx" {T=$2};$1~/^st/ {s=$2};$1~"li"&&$3!~"wpa2" {printf("'"${f[9]}"'",toupper($3))};END { if(S*N*T&&(S-N<'${p[25]}'||T<'${p[55]}')) printf("'"${f[8]}"'",S,N,T);if(s~/^r/&&m!~/^st/) printf("'"${f[10]}"'",m);} ' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 23`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C=A[1];"stat -f%Sm "F|getline D;"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("'"${p[51]}"' "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F"\n   '"${p[50]}"'"T;printf("'"${f[6]}"'",F,D,C,f);if(l>L) printf("'"${f[7]}"'",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' s/:[^:]+$//;s/ +([0-9]+)(.+)/\2: \1/p;' ' { gsub(/[()"]/,"",$3);if($2!="="||!$3) $3="N/A";print $3;} ' ' /es: ./{ s/^.+://;b0'$'\n'' };/^ +C.+ted: +[NY]/H;/:$/b0'$'\n'' d;:0'$'\n'' x;/: +N/d;s/\n.+//p;' ' 1d;/:$/b0'$'\n'' $b0'$'\n'' /(D|^ *Loc.+): /{ s/^.+: //;H;};/(By|m): /H;d;:0'$'\n'' x;/[my]: [AM]|^\/Vo/d;s/(^|\n) [ -~]+//g;s/(.+)\n(.+)/\2:\1/;s/\n//g;/[ -~]/p;' 's/$/:(0|\-(4[34])?)$/p' ' BEGIN{FS=":"};{ if($2) { $2="status: "$2;printf("'"${f[4]}"'",$1,$2);} else print $1;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil "${p[52]}\\" whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom 'mdfind -onlyin /' ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls kextfind );S1() { printf kMDItemContentTypeTree=com.apple.$1;};S2() { printf 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :'$1' {} \;|uniq';};c2=(com.apple.loginwindow\ LoginHook ' /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" "`S2 CFBundleDisplayName`" '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '-F \$Message -k Sender kernel -k Message CSeq "I/O e"|sort|uniq -c' :${p[35]} :Label '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne '08012|Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' "`S1 "{bundle,mach-o-dylib}"`" "`S2 ${p[35]}`" "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -get{dnsservers,info}\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i '-app Safari UserStyleSheetEnabled' -name\ kMDItem${p[35]} '-nl -print' );N1=${#c2[@]};for j in {0..14};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=({Restricted\ ,Lock,Pro}files POST Battery {Safari,App,{Bad,Loaded}\ kernel}\ extensions Heat System\ load boot\ args FileVault Diagnostic\ reports Log {Free\ space,Swap}' (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports User Daemons Agents XPC\ cache Startup\ items {Admin,Root}\ access Bundles {,Inserted\ }dylibs Stylesheet Font\ issues Firewall Proxies DNS TCP/IP Wi-Fi 'Elapsed time (sec)' {Root,User}\ crontab {Global,User}' login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching Nets Descriptors Bad\ plists I/O\ errors Memory\ pressure SMC Shutdowns 'High file counts' );N3=${#l[@]};for i in {0..8};do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { Q=5;v[2]=1;id -G|grep -qw 80;v[1]=$?;((v[1]))||{ Q=7;sudo true;v[2]=$?;((v[2]))||Q=8;};v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';printf "Revision: %s\n\n" ${p[54]};};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=No;((v['$((i+1))']==0))&&v=;};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Ev "${v[$1]}"<<<"$v"|sort`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};C4() { echo "Part $((++P)) of $Q done at $((`date +%s`-v[3])) sec">&4;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 22;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 $((N3+4));for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 0 $((N1+8)) 71 $((N3+3));D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;B0&&{ D13 5 5 69 53;D13 5 54 30 56;C4;D23 5 14 12 14;C4;};D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;C4;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;C4;};D22 12 44 54 45;D22 12 39 15 21;D13 40 58 32 7;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;C4;A1 17 41 20;B7 5;C3 8;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B3 7 7 73;B1&&{ A8 18 26 23;B7 7;B4 0 0 74;C3 23;};A2 18 26 23;B7 7;B4 0 0 74;C3 24;D13 4 21 24 26;B4 4 12 26;C4;for i in {0..3};do A1 0 $((N1+10+i)) 72;B7 12;B4 0 0 31;((i))&&{ B2 14;A4 39 57 70 14;B2 15;B6 14 15 4;};C3 $((N3+5+i));done;A1 24 22 29;B7 12;B2 14;A4 39 57 70 0;B2 15;B6 14 15 4;C3 29;C4;B3 4 13 27;A1 24 23 32;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 6;D13 25 37 32 31;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 2;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+14)) 51 33;D13 4 8 41 52;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 50;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;A1 4 3 60;B2 30;A1 4 24 60;B2 31;B6 30 31 4;C3 5;D12 21 56 35 32;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 1;D23 22 9 37 57;A9;C2 39;C4;} 4>&2 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be a series of messages in the Terminal window like this:
Part 1 of 8 done at … sec
Part 8 of 8 done at … sec
The messages won't be spaced equally apart in time, but they give a rough indication of progress. The total number of parts may be different from what's shown here.
Wait for the final message
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the last message you saw. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Slow runtime with Xcelsius

Similar Messages

Maybe you are looking for