Slowing speed of 'Rotation' title in FCPX

Hi there, I am using the 'rotation' title in Final Cut Pro x and want to slow down the title. at the moment the text changes very quickly and I want it to be slower and clearer to read. can anyone help me?! thanks Final Cut Pro X

I redesigned the title to be just the single Title phase. I published a "Rotation End" parameter so you can set how far you want the letters to turn. I also published a Text Color parameter and Gradient Background "designer".
You can download the title here:
http://sight-creations.com/fxexchange/RotationSingle.zip
If you need help installing it:
http://sight-creations.com/install4fcpx/
Unzip the download and place the entire Rotation Single title folder using the guideline above.

Similar Messages

Controlling Speed of Transitions (& Titles)

I've searched on this & even called FCPX Tech Support, but still feel like I'm missing somthing.
For the example of wanting to start a Project fading from black into a still image, I can't seem to controll the fade in speed as much as I'd like.
Example:
If I place a "Fade to Color" Transition first, and then the Image, and then open the Video Animation box & in "Compositing Opacity" move the slider all the way from left to right, it slows the transition a bit, but I feel I should have more control to slow it further.
For my intention, would you configure as I described?
I believe that extending the times of the Transition & Clip will slow the fade in, but I'd like to have more control within a set length of time. One approach I can imagine would be as in Audio Fade, where one can choose a linear, or curved fade in - I imagine a curved video fade in would be slower than the defualt linear one.
Does that make sense?
Maybe it's just not an option, and I'd have to use Motion, or some such for the degree of control that I am looking for?
As for Titles, if I use the Fade Title, in Inspector I see that one can adjust the "In Spread" and "In Duration"
Can you tell me how you think abut these settings?
Is this what you'd use to control the speed of a Title fading in?
I'm about to play around with it more & will get a better feel, but always appreciate opinions of those with experience.
Thanks!

I'm now playing around with "Midpoint" and "Hold" settings for the Fade to Color Transition.
Again, I'm sure I will get a better feel for how to use these settings, given time, but i would appreciate opinions of those that already have experience.
How do you think of & use these settings?

Changing speed off the Title roll

Can anybody explain me how to change the "rolling speed" off the Title roll in Imovie 9 ?
I introduced a lot off names in the roll, but it is rolling too fast over the screen.

You should see a bar over the video clips that represents the title. Drag the right handle of this bar to the right to make the title longer and slower.

Slow Speeds, Poor Service (Yes.. this is a rant)

As per the title:
I've had about enough of Verizon, and it's trash line quality and equally as terrible technical support.
9 months ago, my wife and I ordered a dry-loop DSL installation. We spent roughly 2-3 weeks awaiting a technician, to make the installation (which included a home installation for a splitter on a walljack), and throughout those 2-3 weeks, the technician insisted he was at our home, and no one was here. Thing is, we have 3 dogs, who go nuts when anyone approaches our driveway, let alone comes to our front door. The technician who was dispatched, was full of it; simple as that.
We ended up canceling our order, and per the recommendation of a customer support rep (via phone), we placed a NEW order, for home phone + DSL installation (according to the rep, dry loop was "difficult".. lol.. really!?), and the rep "promised" we'd have a different technician dispatched and the previous one would be "reported" to a supervisor.
Much to our surprise, the new technician actually arrived a week later, on time, and completed the installation in a timely manner (and was as polite as could be). During the installation, he informed my wife and I, that the rep who claimed the dry loop installation was "difficult", was being dishonest; which we already knew, but it showed that the guy had some integrity, and was at the least, honest.
About 2 months later, we couldn't tolerate the slow speeds any longer. Our package guranteed at LEAST a 1Mb connection, with speeds up to 3Mb (which is the package we ordered), but we consistently received less than 500Kbps, often times less than 200, or even 100. Once again, we had to request a technician, but this time, for a "home run" installation (which eliminates all wiring between our modem/router and the telephone pole). Thankfully, we received the same technician who performed the installation 2 months prior, and during the installation, I asked what HIS opinion was of the issue. He claimed it was just the lines, and that the "hub" at the end of our street, needed an upgrade to support our connection.
It has been SEVEN months, and Verizon has yet to address the obvious TRASH line quality, that I've invested $80+ into a month, and never received anything over 1Mb. Which brings me to:
Verizon's Copy/Paste Speciailists (aka "Technical Support")
My last conversation with a tech support agent, has thoroughly convinced me that Verzion is incapable of caring about their customers. The blind stupidity of this agent was befuddling! I mean, the guy actually told me to reboot my router while I was chatting with him ONLINE!
Quite frankly, if Verzion would stop using third-world call centers who hire people with a lack of comprehension in the English language, maybe customers would receive better support. I've had my fill of speaking to insensate, uneducated dimwits who Copy > Paste all of their pregenerated responses, that never result in a resolution.
Simply put, Verizon is by far, thee worst ISP in central Pennsylvania, and they'd do well by the decent, average, hard-working citizen to simply pull out of the area and allow more legitimate companies to get a foothold here. It's pathetic, that I've gotten to the point that I literally go out of my way, to encourage friends and family to avoid Verizon's services, at any cost. I've actually footed an installation fee for a friend who had to pay a fee to have service extended to his area, by another ISP.
The general synopsis of this wall of text, is that for 9 months, I've endured outrageous prices, for speeds worse than dial-up, all the while tolerating foreign technical support that left me in a blind rage after each encounter. If it weren't for the several obligations I have, that require me to maintain internet service, I'd have canceled my account with Verizon MONTHS ago, and purchased service elsewhere. But unfortunately, the money-grubbing company that is Verizon, has a monopoly in my county, and a belligerent chokehold on their customers. I absolutely despise Verizon, and wouldn't mind seeing them file Chapter 11 Bankruptcy. Ever wonder where the money in our economy has gone? Check Verizon's finances - they rob their customers blind.

OrbitStorm wrote:
As per the title:
-snip-
Send me a PM. I'd like to get to the bottom of this without going through the nonsense tech support puts you through. If you're supposed to be at 1Mbps, I'm going to get you to 1Mbps. I'm on a 1Mbps line and it's unacceptable for my line to fall below that. When it does, I've got contacts who fix it on the spot, no questions asked. I understand if 15Mbps is a problem to maintain on a legacy network, but not 1Mbps, a bread and butter tier on a bread and butter network.
Oh, did I say I got Verizon to fix a congestion issue for a small town nearby me just recently? Had several people ask me about it. All coming off of common equipment, spoke to a few people, took 20 minutes, and those lines are behaving unusually well from what I've heard so far. Still some work to do but I've been working on making sure it gets fixed.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.

Which Mac Pro? More cores=slower speeds? And most of us know the speed matters or FPU for music and I don't understand the faster is for the least amount of procs. And while I get the whole rendering thing and why it makes sense.
The above is what the bar says. It's been a while and wondered, maybe Apple changed the format for forums. Then got this nice big blank canvas to air my concerns. Went to school for Computer Science, BSEE, even worked at Analog Devices in Newton Massachusetts, where they make something for apple.
The bottom line is fast CPU = more FPU = more headroom and still can't figure out why the more cores= the slower it gets unless it's to get us in to a 6 core then come out with faster cores down the road or a newer Mac that uses the GPU. Also. Few. I'm the guy who said a few years ago Mac has an FCP that looks like iMovie on Steroids. Having said that I called the campus one day to ask them something and while I used to work for Apple, I think she thought I still did as she asked me, "HOW ARE THE 32 CORES/1DYE COMING ALONG? Not wanting to embarrass her I said fine, fine and then hung up. Makes the most sense as I never quite got the 2,6,12 cores when for years everything from memory to CPU's have been, in sets of 2 to the 2nd power. 2,4,8,16,32,64,120,256,512, 1024, 2048,4196,8192, 72,768. Wow. W-O-W and will be using whatever I get with Apollo Quad.
Peace to all and hope someone can point us in THE RIGHT DIRECTION. THANK YOU

Thanks for your reply via email/msg. He wrote:
If you are interested in the actual design data for the Xeon processor, go to the Intel site and the actual CPU part numbers are:
Xeon 4 core - E5.1620v2
Xeon 6 core - E5.1650v2
Xeon 8 core - E5.1680v2
Xeon 12 core - E5.2697v2
I read that the CPU is easy to swap out but am sure something goes wrong at a certain point - even if solderedon they make material to absorb the solder, making your work area VERY clean.
My Question now is this, get an 8 core, then replace with 2 3.7 QUAD CHIPS, what would happen?
I also noticed that the 8 core Mac Pro is 3.0 when in fact they do have a 3.4 8 core chip, so 2 =16? Or if correct, wouldn't you be able to replace a QUAD CHIP WITH THAT? I;M SURE THEY ARE UO TO SOMETHING AS 1) WE HAVE SEEN NO AUDIO FPU OR PERHAPS I SHOULD CHECK OUT PC MAKERS WINDOWS machines for Sisoft Sandra "B-E-N-C-H-M-A-R-K-S" -
SOMETHINGS UP AND AM SURE WE'LL ALL BE PLEASED, AS the mac pro was announced Last year, barely made the December mark, then pushed to January, then February and now April.
Would rather wait and have it done correct than released to early only to have it benchmarked in audio and found to be slower in a few areas- - - the logical part of my brain is wondering what else I would have to swap out as I am sure it would run, and fine for a while, then, poof....
PEACE===AM SURE APPLE WILL BLOW US AWAY - they have to figure out how to increase the power for 150 watts or make the GPU work which in regard to FPU, I thought was NVIDIA?

Slow speeds. Apparently I don't have a bt broadban...

After using bt's own e-form to email them about my long running loss of speed over the year from 2.6mb for the last say 10 years, to 1.6mb (1.4mb at its lowest) download / 0.36 up. ping latency around 0.38 i think, apart from today where its 42.25!! what's that?!
All I've got back so far is:
"Recently you requested personal assistance from our on-line support centre. Below is a summary of your request and our response.
If this issue is not resolved to your satisfaction, you may reopen it within the next 14 days.
Thank you for allowing us to be of service to you. " ....and....
"This is in regards to the e-mail you have send on 20th August 2014. We are sorry to inform you that there is no sufficient information in the e-mail to pull up any active broadband account. We would request you to provide the details of your broadband account so that we can pull up the account and help you further."
Just to be clear, their OWN e-form didn't have enough information for them to find my account??? It asks for my name, address, phone number my broadband is on, email address, my account number (assume its the BT account as that's all I have), plus the problem. What else can I type in if there's no other fields.
So I submitted the form. A couple of days later I got an email back with the above included in it.
1. Why automatically close the call? They hadn't resolved anything, so why close it? The only other thing they mentioned was going onto their Help pages (durr how did i manage to use their e-form in the first place?).
2. No mention of what these missing "details" are. (On purpose?)
So I replied and being a little annoyed at their poor response, which just sounds like "yep dealt with that call within the response time target I got to make".
I've had BT broadband since its inception, even before, but they cannot find my account? Amazing they can bill me each quarter without any problems. So I sent my bt account number again even thought it was included in the e-form. Asked them clearly to tell me what "details" of my broadband account they need from me. More than happy to oblige. Oh, and no I'm not satisfied with their resolution and re-open the call!!
So some more days have now passed and guess what. I get an email with the exact same text!!
I replied. In CAPITAL LETTERS for the hard of hearing. What specific details do you want from me?
I wait in baited breath.
OMG I haven't even got onto the problem of the slow speed issue yet!
I guess they want me to phone (premium 0800 number?), or do something myself. I don't want to phone them as I've experienced the same ol' routine before, life's too short. I've paid the top price for ever, so I would think they could do some of the leg work eh? I mean part of the cost is the support they provide, right? How do you lose a broadband account?
It niggles me is that I pay same price infinity customers do and I'm still stuck in the dial-up speed ages. And don't get me on about those tv ads. Like everyone can get infinity. Yeah I'm still waiting after 5 years that it was coming. Amazing the Isles of Scilly with about 10 people living on there manage to get it quicker than me living in a town in the middle of the UK. I digress...
If I can do a speed test from both their bt.com site and btwholesale speed test and get a poor speed (approx 1.8 max) from exchange to router then I know by the time it gets to my pc its not going to be 2.6 is it.
PS i don't have a master socket/test socket to try. its the old type. And why has the speed just dropped and kept down (like for so many others in this forum), where nothing has changed, at least at the customers end of the line.
I don't expect someone in the forum to come up with the solution, but its more of a rant on my part at the poor response to my request, let alone some kind of investigation into the problem itself.
I work in "IT" and part of it is dealing with calls from customers. If I had dealt with a call like BT had then I'd be getting a ear bashing from my manager.
Solved!
Go to Solution.

if you want help about your conenction speed from the forum members then can you post the adsl stats from your router please.
can you try quiet line test dial 17070 option 2 should be quiet nohiss/crackle and best with corded phone if cordless then dull hum normal
can you enter your phone number and post results remember to delete number https://www.btwholesale.com/includes/adsl/main.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Slow speeds, almost dead, can't figure out what's ...

Hi all, I've had very slow speeds from my homehub for almost a week. I've tried a factory reset on the hub to no avail. I also spoke to technical support in India I think, but they were no help.
When I perform a speed check the speed from the exchange to my house is fine, it's after that it dies a death.
I've checked all cables and it is not cabling after the hub as this problem effects internet tv's that are connected via ethernet cable and others that are wireless and also tablets that work on wifi.
In the last week I have had download speeds as low as 0.03 and for only a few hours last Monday has it been OK all of a sudden. I presumed a fix elsewhere but the problem came back an hour or two later.
At the moment we can't use iplayer, youtube and every webpage takes ages to load. It's quite horrible.
Has anyone got any idea's what could be wrong and are there any diagnostic tests I can run on the hub to see if it's borked.

Hi Welcome to the community forums
Here is a basic guide to getting help from the community members done by CL Keith Please read through the link posted http://forumhelp.dyndns.info/speed/first_steps.html
once you have posted the information asked for then the community members can help you more
Thank You
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Slow speed/high SNR margin after upgrade to ADSL2+...

I have an issue with slow speed that I am suspecting is caused by a high SNR margin (about 12dB) which has come about (I believe) due to the fact that my router was repeatedly reset during the first few days of the upgraded service. The exchange was upgraded to ADSL2+ on 3rd January.
I have a US Robotics 9108 which has worked fine for nearly six years. I was getting around 8Mbps before the upgrade which isn't far off the theoretical maximum.
There was a problem with my router and I only found it to be my router at fault over the last few days. Upgrading its firmware has cured the problem which was that requests weren't being fulfilled once connection had been established, (seemingly particularly when this was ADSL2+ or ADSL2 mode). Consequently, I reset my router in these instances and I believe that this will have been interpretted by the exchange as being due to line noise. In general, I disabled ADSL2 and 2+ modes on my router to force it back to G.DMT and it usually worked fine (albeit slow sync rate relative to that I had before 3rd January).
During fault conditions, the connection synced OK. I recently borrowed a router and tried it and it immediately connected faster than mine had done previously and I could access the web without issue. This confirmed that my US Robotics was at fault, and after downloading its latest firmware, it fixed the problem.
There is no bell wire as there are no hard wired extensions from the master socket. I use a single filter which plugs directly into the master socket (i.e. no extension lead to the filter).
I was using a BT filter (MF50) I got in 2004 when I first got broadband. This came with a Voyager 100 modem and is a rebranded YCL one. I have since replaced this with a Z350-UK which I have borrowed. The US Robotics didn't come with any filters.
With the BT filter, caller display does not work at all when the router is connected in ADSL2 mode. In G.DMT mode the problem with caller display was intermittent. The Z350-UK has rectified the problem with caller display not working when in ADSL2 mode. I have ordered a Pressac Interstitial VDSL Faceplate as a perminant solution.
Do I need to contact the support helpline to get this fixed? Or will the SNR margin drop over time? As I say, I got around 8Mbps before the upgrade.
I am presently connected in 2+ mode and stats are:
SNR margin (dB):
12.8
5.4
Attenuation (dB):
34.0
12.0
Output power (dBm):
0.0
12.8
Attainable rate (Kbps):
8984
1144
Rate (Kbps):
6495
1144
I have just run the BT Speed Test and the results are:
Test1 comprises of two tests
1. Best Effort Test: -provides background information.
Download Speed
5282 Kbps
0 Kbps
7150 Kbps
Max Achievable Speed
Download speedachieved during the test was - 5282 Kbps
For your connection, the acceptable range of speeds is 2000-7150 Kbps.
Additional Information:
Your DSL Connection Rate :6495 Kbps(DOWN-STREAM), 1144 Kbps(UP-STREAM)
IP Profile for your line is - 5730 Kbps
2. Upstream Test: -provides background information.
Upload Speed
938 Kbps
0 Kbps
1144 Kbps
Max Achievable Speed
>Upload speed achieved during the test was - 938 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 1144 Kbps
We were unable to identify any performance problem with your service at this time.
It is possible that any problem you are currently, or had previously experienced may have been caused by traffic congestion on the Internet or by the server you were accessing responding slowly.
If you continue to encounter a problem with a specific server, please contact the administrator of that server in the first instance.

once you have maintained 3 days + stable connection then you can contact the forum mods on this link and request a noise margin reset http://bt.custhelp.com/app/contact_email/c/4951
they normally reply by email or phone directly to you within 72 hours
you do not need to contact the helpline
They are a UK based BT specialist team who have a good record at getting problems solved
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

SLOW SPEEDS YET AGAIN IN SHETLAND

Once again I find myself on here complaining about slow speeds. This time were down to 626kbps and I have spoken to other folk around the isles who say theres is at a crawl as well. Can we get this looked into please mods?
Latest BT speedtest results
Test1 comprises of Best Effort Test: -provides background information.
   Download Speed
   626 Kbps
0 Kbps   2000 Kbps
Max Achievable Speed
Download speedachieved during the test was - 626 Kbps
For your connection, the acceptable range of speeds is 400-2000 Kbps.
Additional Information:
Your DSL Connection Rate :2592 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 2000 Kbps
Heres my router stats:
ADSL line status
Connection information
Line state
Connected
Connection time
11 days, 23:23:39
Downstream
2,592 Kbps
Upstream
448 Kbps
ADSL settings
VPI/VCI
0/38
Type
PPPoA
Modulation
ITU-T G.992.1
Latency type
Interleaved
Noise margin (Down/Up)
7.6 dB / 17.0 dB
Line attenuation (Down/Up)
57.0 dB / 29.0 dB
Output power (Down/Up)
18.2 dBm / 12.3 dBm
Loss of Framing (Local)
0
Loss of Signal (Local)
0
Loss of Power (Local)
0
FEC Errors (Down/Up)
10692092 / 131
CRC Errors (Down/Up)
6075 / N/A
HEC Errors (Down/Up)
N/A / 91
Error Seconds (Local)
3882

Hi Shetlander,
I am sorry that you are having problems again. I have just sent you an email.
Drop me a reply when you get a chance.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

I can no longer burn CDs - "may be incompatible with this disc burner, try slower speed, try another make of disc" Still doesn't work

I can no longer burn CDs - "may be incompatible with this disc burner, try a slower speed, try another make of disc" Tried that, still doesn't work.

Try a free burning utility which allows you to turn off the laser for test burning (so you don't waste media). Try burning a test CD outside of iTunes. If it works it's iTunes. If it doesn't work it could be computer software or hardware but then we know how to proceed.
List of burning software on pure-mac.com - http://www.pure-mac.com/diskfile.html
Burn - http://burn-osx.sourceforge.net/Pages/English/home.html - includes basic DVD authoring

Extremely slow speeds on Windows Computers with 5th Generation AirPort Extreme

I just got a new refurbished AirPort Extreme 5th generation. Everything works great for all of my OS X devices and iOS Devices. I am getting my ISPs speeds when doing tests. The issue is when I am using Windows devices. My roommate has a desktop and a netbook and both are getting extremely slow speeds. Speeds like .07Mbps down. Does anyone have any idea what the issue might be?

You have no large file?? Really.. in the whole computer there is not a windows update file.. a backup file... a movie download file.. nothing.. ??
Anyway that is irrelevant.. the issue is wireless.
Download the latest drivers from the wireless manufacturer.
You will need to find out what wireless card is used and locate the correct download for that model.
On the Airport it is well worth doing the following tests.
1. Change the name to SMB standard.. short no spaces pure alphanumeric.
So if your wireless name is Fred Blog's Airport Extreme wireless
Plesae change it to AEwifi
2. Take off all security for a test.
3. Set channels.. I am guessing the computers are only using 2.4ghz, so set 11,6, 1 in that order.
No improvement.. just put the security back to WPA2 Personal with pure alphanumeric password..
Try and test new drivers and use no firewalls on the computer.. ensure that the computer is correctly set for home network.
Beyond that it is just incompatible.

Broadband slow speed,ongoing since end of april

Hi,i have been suffering slow speeds and dropping out since end of april,i have had 9 engineers out,but still no wiser.
I use a desk top and laptop and have problems on both,running at 8 meg,cant open web pages,or do internet shopping,engineer blames the websites.
i am a 2 min walk from the exchange,
if i take my laptop to my sisters 4 miles away it works fine,and shes only on 2 meg.
I had an it consultant round who did a ping test from laptop to router,and router to exchange,laptop to router was fine,but the router to exchange keeps timing out 19 times in 5 mins,where as my sisters did it once in 40 mins.
i have opened a little square bt box from my socket box to the wiring outside,wiring looks in poor condition with wires not actually connected to anything,engineers say that wouldnt affect it,

Hi Efcpaul
I can take a look at this for you.
Send an email to [email protected] with your BT account number, telephone number and a link to this thread.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?

My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16   - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      3% WindowServer
      2% iPhoto
      2% mds
      2% mdworker
      1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outs

Hi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
    "/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m

MacBook Pro(Early 2011) extremely slow speed on Yosemite(10.10.2)

Hi All,
I installed and then reinstalled a fresh Yosemite But now i am experiencing issues like very slow speed of the OS & fan continuously ON. Mavericks was working fine.
this is my ertecheck report
EtreCheck version: 2.1.8 (121)
Report generated 1 April 2015 12:03:11 am IST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
    MacBook Pro (13-inch, Early 2011) (Technical Specifications)
    MacBook Pro - model: MacBookPro8,1
    1 2.7 GHz Intel Core i7 CPU: 2-core
    10 GB RAM Upgradeable
        BANK 0/DIMM0
            2 GB DDR3 1333 MHz ok
        BANK 1/DIMM0
            8 GB DDR3 1333 MHz ok
    Bluetooth: Old - Handoff/Airdrop2 not supported
    Wireless: en1: 802.11 a/b/g/n
    Battery Health: Replace Soon - Cycle count 1329
Video Information: ℹ️
    Intel HD Graphics 3000 - VRAM: 512 MB
        Color LCD 1280 x 800
System Software: ℹ️
    OS X 10.10.2 (14C1514) - Time since boot: 4:1:57
Disk Information: ℹ️
    Hitachi HTS545050B9A302 disk0 : (500.11 GB)
        EFI (disk0s1) <not mounted> : 210 MB
        Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
        MacHDD_2 (disk0s4) /Volumes/MacHDD_2 : 349.63 GB (118.65 GB free)
        MacHDD_1 (disk1) / : 149.11 GB (104.40 GB free)
            Core Storage: disk0s2 149.48 GB Online
    MATSHITADVD-R   UJ-898
USB Information: ℹ️
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Inc. BRCM2070 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
    Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
    Mac App Store and identified developers
Launch Daemons: ℹ️
    [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
User Launch Agents: ℹ️
    [loaded]    com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
    iTunesHelper    Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Google Chrome    Application Hidden (/Applications/Google Chrome.app)
Internet Plug-ins: ℹ️
    Default Browser: Version: 600 - SDK 10.10
    QuickTime Plugin: Version: 7.7.3
    SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
3rd Party Preference Panes: ℹ️
    None
Time Machine: ℹ️
    Mobile backups: OFF
    Auto backup: NO - Auto backup turned off
    Volumes being backed up:
        MacHDD_1: Disk size: 149.11 GB Disk used: 44.71 GB
    Destinations:
        MacHDD_2 [Local]
        Total size: 349.63 GB
        Total number of backups: 0
        Oldest backup: -
        Last backup: -
        Size of backup disk: Adequate
            Backup size 349.63 GB > (Disk used 44.71 GB X 3)
Top Processes by CPU: ℹ️
        26%    Microsoft Outlook
        12%    coreaudiod
         6%    Google Chrome
         3%    WindowServer
         1%    launchservicesd
Top Processes by Memory: ℹ️
    215 MB    mds_stores
    193 MB    Google Chrome
    183 MB    Google Chrome Helper
    129 MB    iTunes
    107 MB    Microsoft Outlook
Virtual Memory Information: ℹ️
    5.04 GB    Free RAM
    3.41 GB    Active RAM
    698 MB    Inactive RAM
    1.59 GB    Wired RAM
    4.71 GB    Page-ins
    0 B    Page-outs
Diagnostics Information: ℹ️
    Mar 31, 2015, 07:59:25 PM    Self test - passed

Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

How I fixed my slow speeds

This may not work for everyone, but I have been experiencing some slow speeds both wired and wireless in my office. I fixed it by doing the following:
1. Open up a windows pc to the command prompt (start -> run -> cmd )and type: ipconfig -all
2. Make a note of your DNS servers.
3. Go to the "Network" section of your system preferences. Under TCP / IP, add in those DNS servers on the Mac.
This fixed some of my problems!
Good Luck!
Colin

this one is a known fix. this works for me and for the customers i support. but if you are running wireless, you may want to access the channel, popwer and mtu settings of your wireless router

Slowing speed of 'Rotation' title in FCPX

Similar Messages

Maybe you are looking for