SM:EXEC SERVICES / ABAP ERROR
after upgrade SM3.2->SM4.0 EWA reports don't generate.. I 've got following:
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_ROOT_____________073
" in include "RDSVASAEW_ROOT_____________073 " in
line 197:
"The field "FB_DLDINSTPAR_TAB001155" is unknown, but there is a field w"
"ith the similar name "FB_DLDINSTPAR_TAB000807". "FB_DLDINSTPAR_TAB0008"
"07"."
What should I do??
Hello Damian,
you have to generate the includes again as described in note
611536 - Generation error in reports (name pattern RDSVAS____00*)
Best Regards,
Thomas
Similar Messages
-
Solution Manager - Error when executing Job SM:EXEC SERVICES
Hi,
I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
The jobs starts but i get an error during is execucion:
Runtime errors SYNTAX_ERROR
Occurred on 17.01.2008 at 14:06:28
Syntax error in program "RDSVASAEW_DBMSS____________052 ".
What happened?
The following syntax error occurred in the program
RDSVASAEW_DBMSS____________052 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
Error in ABAP application program.
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
I tried to generate all the function modules and i get this error:
Logical function: MSQ_TEMPDB_DOWNLOAD :
Error 1 during generation of /1CAGTF/IF_LOGFUNC_000208
Syntax error.
Can you help me on this error?
Best regards,
Nuno SilvaHi Pedro,
I insert my answer from a similar thread.
As a pitty, that's a well known error.
Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
Basically, these three steps needs to be performed:
1) BDL_DELETE_ALL_TABLES
2) SDCCN - Refresh Service Definitions
3) Generate Logfuncs
SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
OPTION: ALL
It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
-> Activate the Service Data Control Center in the Solution Manager
-> Generate Includes for Service Data Contol Center
With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
Best regards,
Ruediger Stoecker -
Short dump while executing job SM:EXEC SERVICES for EWA alert generation
Hello All,
I'm getting short dump error while executing job SM:EXEC SERVICES for EWA alert generation.I'm using EHP1@SP22 of Sol Man.
Please find the logs
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASCABAP_TRANS__________073
" in include "RDSVASIABAP_TRANS__________073 " in
line 1782:
"Field "STATEMENT_SUMMARY001019" is unknown. It is neither in one of th"
"e specified tables nor defined by a "DATA" statement. "DATA" statement"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
If anyone came across such kind of dump, please reply asap, due to this, i could not generate EWA report for R/3 system 6.04.
Thanks,
Anand.>
Anand Tigadikar wrote:
> Thx Paul, but i already did checked this note and its not solving my issue
Dear Anand,
Did you perform a complete service definition replacement for SDCC/SDCCN as described in the note?
These are manual steps you need to perform on the system and are not code corrections.
I would suggest you perform it, if you have not, and check the SDCCN logs to review the process ran cleanly.
Note: Please make sure SDCC_OSS is functioning and a connection to SAP can be made before
deleting the service definitions.
If you have already replaced the service defintions on the Solution Manager system, then no point doing it again. However checking a note and applying it are not the same thing. So I am uncertain if you replaced the service definitions or not. The dump you are getting in SM:EXEC SERVICES suggests its due to a problem with the service definitons. The recommendation is to replace them according to the process described in SAP Note 727998. If you have not done so please do so.
If you have successfully replaced the service definitions are you still getting the same dump, or has it possibly changed?
Regards,
Paul -
Problem in SM:EXEC SERVICES job.
Hi Experts,1. SM:EXEC SERVICES job is getting cancelled in our solution manager system,
After checking the job log I found out that Job is getting cancelled with ABAP dump SYNTAX_ERROR
2. I checked for the ABAP dump and found that job is getting dump when trigerring Standard SAP program
RDSVASCEW_DBORA____________060. I checked for any OSS notes in service market place but could not fix...
3. I tried manually doing syntactical check for the program but it is getting syntax error in
INCLUDE report "/1CAGTF/IF_LOGFUNC_000498" not found.
If some body could advice on the issue, it would be great help !! Thanks
Let me know if I need to provide more details on the problem.
Regards, Amber S>
Ruediger Stoecker wrote:
> This is not required for the mentioned dump. The dump pattern is well known
>
> Just follow the instructions of SAP Note 727998 (which has been already recommended above). It's the standard answer and it's always recommended. It will solve the SYNTAX_ERROR.
If the dump pattern is well known, the reason behind the dump or to replace service definitions should have been explained.
Some of the programs (e.g.'RDSVASAEW_ROOT_____________027', 'RDSVASAEW_DBORA____________032') used in the SAP Solution Manager cannot be generated anymore. During the attempt to generate them, the system generates the following error: 'GEN_TOO_MANY_CBS, generation error: Too many DATA control blocks generated', 'Field "OMS_VERSIONS000910" unknown'.
Check this note.
525097
-=-Ragu -
SM:EXEC SERVICES job getting failed in Solution manager
HI All,
SM:EXEC SERVICES job getting failed in solution mnager and job log will be fowlloing:
01-31-2012 19:09:21 Job started
01-31-2012 19:09:21 Step 001 started (program RDSMOPBACK_AUTOSESSIONS_ALL, variant , user ID BASISUSER)
01-31-2012 19:09:21 MemSize Begin = 796480 Bytes
01-31-2012 19:09:21 *******************************
01-31-2012 19:09:21 MemSize Begin = 1919120 Bytes
01-31-2012 19:09:23 Solution <000000106120000> "SID..." is being edited (Operations)
01-31-2012 19:09:23 <000000106120000> "SID..."(Operations)
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 0 bytes
01-31-2012 19:09:23 "Create_Periodic_Services" uses = 690 us time
01-31-2012 19:09:23 Trying to perform session EC2000000001313
01-31-2012 19:09:24 MODEL_KEY: SID Installation Number: 6 MODEL_MODE: E MODEL_VERSNR 00001 MODEL_CLASS: EWA Data Model
01-31-2012 19:09:30 Definition nicht vorhanden
01-31-2012 19:09:33 Definition nicht vorhanden
01-31-2012 19:09:45 Internal session terminated with a runtime error (see ST22)
01-31-2012 19:09:45 Job cancelled
St22 Dump:
The exception 'CX_DSVAS_API_CONTEXT_INSTANCE' was raised, but it was not caught
anywhere along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLDSVAS_PROC' has to be
terminated.
Please suggest how to proceed further and provide your valuble inputs
Thanks
NekkalapuHI Siva,
I have done the changes according the note but still same problem.
Please suggest any other ways to resolve this issue .
Advance thanks
Regards
Nekkalapu -
SM: EXEC SERVICES Job is Cancelling
Hello everyone-
I have seen a few posts about this job cancelling however I haven't been able to gather a solution from what I have read. After appling SP15 in our Solution Manager system, the SM: EXEC SERVICES job is failing.
We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job. Has anyone implemented these notes? If so, did it solve this problem?
Here are the details from ST22:
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_DBUDB____________057
" in include "RDSVASAEW_DBUDB____________057 " in
line 61:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Any ideas?>
Nathaniel Williams wrote:
> Hello everyone-
> We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job.
>Has anyone implemented these notes? If so, did it solve this >problem?
Hi Nathaniel,
just follow the instructions of SAP Note 727998. It's the standard answer and is always recommended.
It will solve the mentioned SYNTAX_ERROR.
Just search for this note in the forum.
Best regards,
Ruediger (also from SAP) -
SM:EXEC SERVICES JOB CANCELLED with MESSAGE_TYPE_X dump
In SAP solution manager server SM:EXEC SERVICES job is Cancelling
Hence we are unbale to get the EWA reports...
Error:
Job started
Step 001 started (program RDSMOPBACK_AUTOSESSIONS, variant
&0000000001009, user ID RAOP)
Solution OC Application Monitoring is being edited (Operations)
Trying to perform session 5000000003618
ABAP/4 processor: MESSAGE_TYPE_X
Job cancelled
Applied note 727998 but no use... please help me .
Regards
Prabhakar
Version details:
ST-SER 620-2006_2
PI_ BASIS 2005_1_620Hi Prabhakar,
Which SP of Solman are you using? If you are using Solman SP12 then the ST-SER has to be upgraded to higher version. Also update the PI_BASIS component.
ST-SER 700_2007_1
PI_BASIS 2006_1_700.
Regards,
Raghavendra. -
SM:EXEC SERVICES background job Failing
Hi All,
I am having a problem with the job SM:EXEC SERVICES in solution manager system, I have done all the steps in sapnote 727998, applied the transport given by sapservx but no luck.I suppose this is a very comon problem and should have solved by applying the mentioned note.Here are the logs of the job ..
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAABAP_TRANS__________072
" in include "RDSVASIABAP_TRANS__________072 " in
line 3074:
"Field "/SSF/DHEAD-GUID" is unknown. It is neither in one of the specif"
"ied tables nor defined by a "DATA" statement. "DATA" statement."
Regards,
JawadHi Jawad,
according to service.sap.com/supporttools->ST-A/PI ->Installations and Patches:
"The Service Tools for Applications Plug-In must be installed on all SAP Systems in your system landscape including the SAP Solution Manager."
So the answer is yes.
best regards,
-David. -
SM:EXEC SERVICES SINTAX_ERROR
Olá pessoal,
Estou tentando gerar o Early Watch de alguns ambientes e estou com o seguinte problema, no momento em q os dados do ambiente ja estao disponiveis no SM e eu vou executar o job exec service para gerar o Early Watch, o job é cancelado com o seguinte erro visualizado na ST22:
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1AGS/ATECH_INIT_SFS_______009
" in include "/1AGS/ITECH_INIT_SFS_______009 " in
line 66:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000670" not found."
Alguem aqui ja passou por situação parecida???
Desde ja obrigado.Carlos dá uma olhada na nota 1996413 - Shortdump syntax error in Program "/1AGS/ATECH_INIT_SFS_______009
e tenta executar o procedimento abaixo:
Solution #2
Typically Syntax errors occurring in the name space /1AGS1/ can be resolved as per SAP Note 700518
If a syntax error like '/1CAGTF/IF_LOGFUNC_00nnnn not found' occurs please do a 'Delete and Replace Service Definitions' in transaction SDCCN -> Utilities -> Maintain Service Definitions. (Details of the
procedure are described in SAP Note 727998
Att,
Felipe -
SM:EXEC Services is failed
Hi!
I am about to start backgroud job SM:EXEC Services in order to see my EWA from Tcode DSWP.
I started the job as SAP* or DDIC and
receive the following <b>error :ABAP-Processor: Syntax error</b>
(step 001 started)(Program RDSMOPBACK_AUTOSESSIONS, ...)
Has perhaps some one the same error or know how to proceed?
Thank you very much indeed
regardsHi!
Thank you!
Here is the error from SM:EXEC SERVICES job:
Short text: Syntax error in program "RDSVASAEW_ROOT_____________073 ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_ROOT_____________073
" in include "RDSVASAEW_ROOT_____________073 " in
line 197:
"Feld "FB_DLDINSTPAR_TAB001155" unbekannt. Es existiert aber ein Feld m"
"it dem ähnlichen Namen "FB_DLDINSTPAR_TAB000807"."
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RDSVASAEW_ROOT_____________073".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Thank you very much for your further help/information
regards -
At least one service session failed during job SM:EXEC SERVICES
Hello everyone.
I'm have problem with job "SM:EXEC SERVICES" in my System: SolutionManager 7.1 SPS12.
Number of sessions to process in parallel: 5
Child job SM:EXEC_MULT_SES_1 started
Displaying log of child job SM:EXEC_MULT_SES_1
Step 001 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000060, user ID SOLMAN_BTC)
Trying to perform session EA0010000000001
Error (shown below) in session EA0010000000001. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session EA0010000000001 not performed
Step 002 started (program AGS_SISE_SM_EXEC_PARALL_REPORT, variant &0000000000061, user ID SOLMAN_BTC)
Trying to perform session VE0010000000002
Error (shown below) in session VE0010000000002. Hints on analysis in SAP Note 700518
Error message: An exception occurred that was not caught.
Session VE0010000000002 not performed
ABAP DUMP "Error analysis":
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EW_ROOT& version &50079& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
"CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
"CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEW_ROOT_____________079 does not exist
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_DSVAS_API_SERVICE_SESSION', was
not caught and
therefore caused a runtime error.
The reason for the exception is:
Program for actions in check group &EWAFS_ROOT& version &50007& not found
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SY_PROGRAM_NOT_FOUND", which was raised in the program
"CL_DSVAS_PROC_CHECK_GROUP=====CP",
specifically in line 25 of the (include) program
"CL_DSVAS_PROC_CHECK_GROUP=====CM00A".
The cause of the exception was:
Program /1AGS/AEWAFS_ROOT__________007 does not exist
i'm was trying find program "/1AGS/AEWAFS_ROOT__________007" and "/1AGS/AEW_ROOT_____________079" in SE80, but to no avail.
Full job report and dumps in attachment.
Kernel release 721
Compilation Linux GNU SLES-11
Sup.Pkg lvl. 401
ABAP Load 1780
CUA load 39
Mode opt
SAP_BASIS
702
0015
SAPKB70215
SAP Basis Component
SAP_ABA
702
0015
SAPKA70215
Cross-Application Component
CTS_PLUG
200
0013
SAPK-20013INCTSPLUG
SAP CTS Plugin
PI_BASIS
702
0015
SAPK-70215INPIBASIS
Basis Plug-In
ST-PI
2008_1_700
0011
SAPKITLRDK
SAP Solution Tools Plug-In
BI_CONT
707
0007
SAPK-70707INBICONT
Business Intelligence Content
GW_CORE
200
0008
SAPK-20008INGWCORE
SAP GW CORE 200
SAP_BS_FND
702
0013
SAPK-70213INSAPBSFND
SAP Business Suite Foundation
SAP_BW
702
0015
SAPKW70215
SAP Business Warehouse
UISAPUI5
100
0007
SAPK-10007INUISAPUI5
SAP UI5
UI_INFRA
100
0007
SAPK-10007INUIINFRA
SAP UI INTEGRATION INFRASTRUCTURE
IW_GIL
100
0004
SAPK-10004INIWGIL
Generic Interaction Layer
SAP_AP
700
0031
SAPKNA7031
WEBCUIF
701
0012
SAPK-70112INWEBCUIF
SAP Web UI Framework
BBPCRM
701
0012
SAPKU70112
BBPCRM
CPRXRPM
500_702
0011
SAPK-50011INCPRXRPM
SAP Portfolio and Project Management 5.0 (ABAP)
IW_BEP
200
0008
SAPK-20008INIWBEP
Backend Event Provider
IW_FND
250
0008
SAPK-25008INIWFND
SAP IW FND 250
ST
710
0012
SAPKITL712
SAP Solution Manager Tool
ST-BCO
710
0010
SAPK-71010INSTBCO
BI Content for SAP Solution Manager
RTCISM
100
0000
Integration into SAP IT Infrastructure Management
SOCO
101
0003
SAPK-10103INSOCO
SAP Solution Composer Server
ST-A/PI
01R_700
0001
SAPKITAB7N
Application Servicetools for SolMan 7.0-
ST-ICC
200
0001
SAPK-20001INSTICC
Innovation Control Center
ST-ICO
150_700
0043
SAPK-15087INSTPL
SAP Solution Manager Implementation Content
ST-SER
701_2010_1
0025
SAPKITLOSP
SAP Solution Manager Service ToolsHi,
Try this.
Run RAGS_DSWP_SERV_CONTENT_RESET in Se38 and seclect "Remove content completely"
Goto AGS_UPDATE and apply the updates again and make sure that all is are green.
Open the EWA session that was dumping and reset session component.
Regards, -
Failed to open service OracleDEV102TNSListener , error 1060
Dear Consultants,
I have been trying to install ECC6 , Oracle on Windows 2003, and my Hardware is RAM --2 GB
HDD -- 300GB
I am having intel duo core processor and iam using Gigabyte motherboard,Intel chipset.
My Installations stops at Import_Abap phase, following are the logs ,
<b>ERROR 2007-03-10 04:47:46
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
ERROR 2007-03-10 04:47:47
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
INFO 2007-03-10 05:03:18
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor</b>".
I have set the all the Environment variables , i run r3trans -d and the result is
<b>C:\Documents and Settings\devadm>r3trans -d
This is r3trans version 6.13 (release 700 - 20.02.06 - 16:15:00).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).</b>
<b>I also run r3trans -x and the result is.
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 21 1.098448
4 ETW000 [dev trc ,00000] Try to connect with default password 142 1.098590
4 ETW000 [dev trc ,00000] Connecting as SAPSR3/<pwd>@DEV on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
4 ETW000 22 1.098612
4 ETW000 [dev trc ,00000] Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
4 ETW000 23 1.098635
4 ETW000 [dev trc ,00000] 0 UTF8 1 0244CF08 0245243C 02451CC4
4 ETW000 24 1.098659
4 ETW000 [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=02463484) 14 1.098673
4 ETW000 [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=02451C10,srvhp=02463484)
4 ETW000 19 1.098692
4 ETW000 [dev trc ,00000] Deallocating server context handle 02463484 16 1.098708
4 ETW000 [dev trc ,00000] Allocating server context handle 15 1.098723
4 ETW000 [dev trc ,00000] Attaching to DB Server DEV (con_hdl=0,svchp=02451C10,svrhp=02463484)
4 ETW000 29 1.098752
4 ETW000 [dev trc ,00000] Tue Mar 13 04:38:09 2007 1093335 2.192087
4 ETW000 [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed: rc = 12541
4 ETW000 19 2.192106
4 ETW000 [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
4 ETW000 19 2.192125
4 ETW000 [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblink#3 @ 431]
4 ETW000 176 2.192301
4 ETW000 [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#3 @ 431]
4 ETW000 19 2.192320
2EETW169 no connect possible: "DBMS = ORACLE --- dbs_ora_tnsname = 'DEV'"</b>
Event Viewer result is
<b>----
Faulting application isqlplussvc.exe, version 1.0.7.0, faulting module msvcrt.dll, version 7.0.3790.0, fault address 0x0003113b.</b>
finally in SAPINST logs i could see
<b>
Starting tnslsnr: please wait...
Failed to open service <OracleDEV102TNSListener>, error 1060.
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
System parameter file is C:\oracle\DEV\102\network\admin\listener.ora
Log messages written to C:\oracle\DEV\102\network\log\listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Connecting to (ADDRESS=(PROTOCOL=IPC)(KEY=DEV.WORLD))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production
Start Date 10-MAR-2007 01:29:29
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\oracle\DEV\102\network\admin\listener.ora
Listener Log File C:\oracle\DEV\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEV.WORLDipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=
.\pipe\DEVipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=DEV)(PORT=1527)))
Services Summary...
Service "DEV" has 1 instance(s).
Instance "DEV", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully</b>
Please suggest for the possible workaround, as you can see i have tried everything.
Regards,Dear Umesh,
I have triggered the Installation again, still the problem remains unresolved,
PLEASE CONFIRM THAT I AM USING INTEL CORE DUO PROCESSOR , does it have any dependcies or prerequisites.
pasting the last few lines of logs of SAPAPPL1_15, where i got the error in ABAP IMPORT.
DbSl Trace: ORA-4031 occurred when executing SQL statement (parse error offset=0)
(DB) ERROR: DDL statement failed
(CREATE UNIQUE INDEX "VDBEPI_EU~0" ON "VDBEPI_EU" ( "MANDT", "BUKRS", "RBELKPFD", "RPOSNR" ) TABLESPACE PSAPSR3 STORAGE (INITIAL 16384 NEXT 0000002560K MINEXTENTS 0000000001 MAXEXTENTS 2147483645 PCTINCREASE 0 ) )
DbSlExecute: rc = 99
(SQL error 4031)
error message returned by DbSl:
ORA-04031: unable to allocate 40 bytes of shared memory ("shared pool","CREATE UNIQUE INDEX "VDBEPI_...","Typecheck","qcsqlpath: qcsAddSqlPath")
(DB) INFO: disconnected from DB
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\NAJ\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20070517090126
===================================================
IMPORT_MONITOR.JAVA logs.
Import Monitor jobs: running 2, waiting 35, completed 34, failed 1, total 72.
Loading of 'SAPAPPL1_15' import package: ERROR
Import Monitor jobs: running 1, waiting 35, completed 34, failed 2, total 72.
Loading of 'SAPAPPL2_5' import package: ERROR
Import Monitor jobs: running 0, waiting 35, completed 34, failed 3, total 72.
Import Monitor jobs: running 1, waiting 34, completed 34, failed 3, total 72.
Import Monitor jobs: running 2, waiting 33, completed 34, failed 3, total 72.
Import Monitor jobs: running 3, waiting 32, completed 34, failed 3, total 72.
Loading of 'D021T' import package: OK
Import Monitor jobs: running 2, waiting 32, completed 35, failed 3, total 72.
Import Monitor jobs: running 3, waiting 31, completed 35, failed 3, total 72.
Loading of 'SAPAPPL1_12' import package: OK
Import Monitor jobs: running 2, waiting 31, completed 36, failed 3, total 72.
Import Monitor jobs: running 3, waiting 30, completed 36, failed 3, total 72.
Loading of 'SAPSSEXC_4' import package: OK
Import Monitor jobs: running 2, waiting 30, completed 37, failed 3, total 72.
Import Monitor jobs: running 3, waiting 29, completed 37, failed 3, total 72.
Loading of 'SAPSSEXC_6' import package: OK
Import Monitor jobs: running 2, waiting 29, completed 38, failed 3, total 72.
Regards, -
We've been able to successfully, automatically, deploy our MVC and WebApi to IIS7.5 on Win2008 R2, for some time now. Just this week the MSDeploy stopped working. The System event log shows this error when attempting to restart the Web Management
Service on the targeted Win200 R2 server:
The Web Management Service service terminated with service-specific error %%-2147483640.
The Application log shows this error at the same exact time the above error occurs.
IISWMSVC_STARTUP_UNABLE_TO_ACTIVATE_HWC
Failed to activate the Hostable Web Core (HWC). Web Management Service startup failed. Please reference the Win32 error in this event for further information. Exception:System.Runtime.InteropServices.COMException (0x8007007F): The
specified procedure could not be found. (Exception from HRESULT: 0x8007007F) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Web.Management.Server.WebServer.Microsoft.Web.Management.Server.Interop.IWebServer.Start()
Process:WMSvc User=NT AUTHORITY\LOCAL SERVICE
The above error is preceded by this warning:
A listener channel for protocol 'http' in worker process '7164' serving application pool 'WMSvcAppPool' reported a listener channel failure. The data field contains the error number.
Which is preceded by this error:
Failed to find the RegisterModule entrypoint in the module DLL C:\Windows\Microsoft.NET\Framework64\v4.0.30319\webengine.dll. The data is the error.
We've attempted to reach the target server using https://ourservername:8172/MsDeploy.axd. The response is:
Error 102 (net::ERR_CONNECTION_REFUSED): The server refused the connection
Is this occurring because the port is blocked or because the Web Management Service is not running? (The Windows Firewall with Advanced Security dialog says the "Windows Firewall is off" and there are no entries in the firewall log (C:\Windows\System32\LogFiles\Firewall).
We've seen some posts that indicate the certificate may be the issue. Not sure how to actually tell if this is the case though. The CERT we have says it is valid thru 2029.Hi Nicola,
seems like your web service runtime is not configured correctly. Please check out the following SAP Notes:
Note 1043195 - Configuration of the Web service runtime
Note 1292171 - Troubleshooting Guide: ABAP Web Services Runtime
Kind regards
Heiko -
Unable to open solution in Solution Manager - SM:EXEC SERVICES
Hello Experts!!
We have Solution Manager 3.2 SR1 on Solaris 10
We have confiured EWA report to be generated every week through the solution manager. The session data although gets generated for the service created in Solution manager but we are unable to download the EWA report as the automatic job SM:EXEC SERVICES fails with the job log as
Unable to open solution Test. (where the solution name is Test).
Message no. DSWP017
When the service processing is started explicitly it runs accordingly. Could you please let me know whether it is an authorisation issue or something else?
Thanks and Regards,
Karan ShahTake a look at the following notes that desribe the reason and
the solution for this issue:
SAP Note 525097 - Programs cannot be generated, SYNTAX_ERROR,
SM:EXEC SERVICES
SAP Note 611536 - Generation error in reports
(name pattern RDSVAS____00*)
SAP Note 727998 - Complete Replacement of Service Definitions
for SDCC/SDCCN
After applying the above Note SM:EXEC SERVICE background job
should run correctly again.
Please, first refresh the service definitions on the satelite system
and then, if the problem persists, on the Solution Manager system. -
"invalid web service URL" error for create web service system
Hi.
I want to call web service in visual composer and try to create Web Service definition.
When I push create button in visual composer, I got "invalid web service URL" error.
My web service is located in SAP ABAP System and I can check WSDL URL in web service homepage.
(http://mycompany.com:8000/sap/bc/srt/rfc/sap/ZTEST?sap-client=500&wsdl=1.1)
Any ideas for this error ?
Regards, Arnold.Hi
Please can you create the web service in the portal as a portal system, this will work and you will be able to see the service in Visual Composer.
Jarrod Williams
Maybe you are looking for
-
Android App does not work for me
Hello: I have an Android Tablet with 2.3.3 version. The tablet has flash player 10.1 and Adobe Air 3.0 installed. I have made a simple apk in flash CS5.5 iwith Adobe Air SDK 3.1. The application only has a frame with a "Welcome" label. When I instal
-
How to update bean properties when using an immediate link
Hello, I have a page with a find link next to an input text field. The input text field requires a valid code to be entered. If the user doesn't know the code they need to press the find link to go to a search page and select the code. The input text
-
I am having an issue with my iphone4s. It will no longer connect to wifi.
I am having an issue with my iphone4s. It will no longer connect to wifi. The wifi icon is grey and cannot be turned on. How can this be rectified?
-
Alt Chart of Accounts: Change of GL Assignment
Hello Experts, We have implemented Alternate Chart Of Account (CoA). Balances have been posted. Now during the middle of the Fiscal Year, Government has changed the numbering of few of the local chart of account numbers. SAP gives error message and d
-
Best way to organize a large photo library on a 10.6.8 Macbook?
I have an older Macbook pro- version 10.6.8. I am looking for the best way to organize my large library of photos (approx. 15,000). I have both personal as well as professional photos that I would like to organize and keep separately. I currently u