SM30 Wrong Data retention on screen

Hi ,
I have a requirement as follows :
Create a table maintenance for a table with material number and plant as primary key.Then while maintaining the values
I have to check if that matnr+werks is present in MARC table . If say 10 material plant are entered in the table maintenance (1 screen) and 5 are invalid combination , then 5 should be saved in the table and rest 5 should remain on the SM30 2nd screen as it is with no saving .
I have validated the data from MARC by using table maintenance events and only the required records are added in the table but the ones which are not correct do no re-appear on the 2nd screen of SM30 because of which the user has to re-enter all the data instead of just rectifying the wrong data.
Please suggest some idea asap
Thanks ,
Supriya

Hi  Sreekanth,
Thanx for your input .
I  have not yet tried the solution you gave but is this possible with single screen (as mine is a single screen ) instead of the 2 screen solution you provided ?
Thanks ,
Supriya

Similar Messages

  • My calender is showin the wrong date on the screen why is that?

    my calender is showing the wrong date how can I fix that can anyone help me?

    try rebooting your phone
    hold the home and lock button until the apple appears then let go

  • Calendar app icon is displaying the wrong date

    For some reason on my iPhone's homescreen the icon for the Calendar app has today started displaying the wrong date.
    It should show today's date, Monday 6th but instead it reads Sunday 5th.
    What confuses me is that the phone does know the date is Monday 6th as the lock screen shows it correctly and also when I actually load the Calendar app it starts on the right date. Also, when I load the multi task bar the Calendar app icon there is correct. See the attached photo, which shows the Calendar app on the home screen (faded, middle left) displaying yesterdays date Sunday 5th, while the app icon in the multi task bar is correct, Monday 6th.
    Syncing the calendar with my iMac does not correct the error. Equally, turning the phone off and on again has not sorted it.
    Does anyone have any idea what might be causing the fault? And more importantly how to correct it?
    Thanks.

    Thanks for the suggestion DaVBMan, sadly it didn't work. The only thing that did work was to wait until midnight and it corrected itself. In the mind of the phone it lived a whole day twice and then skipped one completely in order to get back on track. Very odd and also I have since discovered it has happened to a few of my friends too.
    It's not happened again so I have no idea what so ever what caused it. Fingers crossed it never recurs.

  • Problem in passing data from 1 screen to another using BBP_DOC_CHANGE_BADI.

    Hi Experts,
    i am new to the SRM, i am facing problem in passing data from one screen to another.
    my requirement is that when we select one shopping cart and press the PROPOSE SOURCES OF SUPPLY button, we will fetch all the contracts that are attached to the shopping cart.
    we have implemented a BADI implementation of BBP_SOS_BADI (method BBP_SOS_CHECK) for passing some changed values to the contracts of the shopping cart into the popup screen that is displayed when we press PROPOSE SOURCES OF SUPPLY button and when we select any contract and press ASSIGN ONLY button in the popup screen the badi BBP_DOC_CHANGE_BADI is triggered.
    i have implemented another BADI implementation of BBP_DOC_CHANGE_BADI for fetching the selected contract and pass the values to another screen, but the problem is that when we select one contract and press the assign only button we are fetching the wrong contract number ( that is in the BADI method BB_SC_CHANGE parameter IT_ITEM we are fetching the wrong contract), if we again do the same procedure for the second time we are getting the correct contract.
    i am unable to understand why we are getting the wrong contract in the first time( that is we are getting contract other than the selected one).
    as per my understanding i think when we are passing data to the popup screen using BBP_DOC_CHANGE_BADI we are not updating the shopping cart with the changed data.
    can anyone tell me how we can update the SHOPPING CART with the changed contracts data, i have used BBP_PD_SC_UPDATE, BBP_PD_SC_SAVE and other shopping cart FM but nothing is happening.
    Thanks
    Tanveer

    Hello,
    What version of SRM are you on?  Have you check for OSS Notes?  I have had trouble with BBP_DOC_CHANGE_BADI but it was because of other issues.  The BADI works pretty well and it is called almost every time something happens to the shopping cart.
    I have noticed that sometimes that values are not changed til the second calling of the BADI.  I have yet understand why but I think it has to do with prompt processing. Usually, we train our requisitioners to click the 'Check'  button to flush things out.
    I don't know if I was helpful.... another thought.... could there be an error caught by BBP_DOC_CHECK_BADI that is preventing change in BBP_DOC_CHANGE_BADI?
    Regards, Dean.

  • Wrong date and time in apple's mail client

    All mails in my inbox are displaying date at 1429 a.c. Although through my web gmail interface, dates are correct the mac client is fault. I also tried with Thunderbird e-mail client and i also get wrong date and time. I checked the date and time preferences and everything is correct.  Any suggestions?
    Thanks

    Hi,
    In the Initial screen, please remove the tick for Display Header. It will not give any header details after execution. If you want to remove only date, you just check with your ABAPer, he can help by changing in program.
    Thanks
    Kishore Babu

  • Passing data to new screen

    I'm running a standalone tomcat 4.0.4. When the user logs in his information is retrieved from the database and placed in a vector. I go through two seperate screen before I am to have the fields on the screen prepoplulated with the data retrieved from the user login. But nothing is showing up. What am I doing wrong. This is a HTML screen because I can not get the JSP to work.

    you may move the data from one screen to another in different ways:
    create a session object of HttpSession and add the data you have to the session
    session.setAttribute("name",object);
    pay some attention to how managing and retrieving the session from different page.
    or you may add the data to the request object i.e
    request.setAttribute("name", Object) ;
    and then obtain requestdispatcher
    then forward or include the request to any other resource
    requestdispatcher.forward(request,response) ;
    regards

  • Yosemite calendar week printing problem (wrong dates)

    When I try to print a week in calendar on OS X Yosemite the day which is automatically selected and the range are wrong.
    Having set up with Monday as starting day in print view it starts with Tuesday, besides taking the wrong date (week before).
    Workaround is to temporarily change to "week is starting on sunday" but this gives wrong view on screen.
    Hermann

    Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
    Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
    Feedback
    Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
    Feedback via Apple Developer

  • Oralce query giving wrong data

    Hi all oracle experts :
    in oracle backend ( LOV ) user is selecting 'long text' instead of 'short text' and as a result user is getting wrong data Ship_To_Adress ( column ). here what i need is :
    Upon data is coming from Long_Text table - it should not bring the wrong data Ship_To address.. It should give no value on the report.
    feasibility of modifying query to maintain two Scenarios - Irrespective of Long or Short text - User should not give wrong 'Ship To' address on the pick ticket.
    please go through the following query and make necessary changes. thanks in advance for your precious time valuable advice
    looking the feasibility of modifying query to maintain two Scenarios - Irrespective of Long or Short text - User should not give wrong 'Ship To' address on the pick ticket.
    Thanks in advance
    Shiva
    SELECT
         wpsv.pick_slip_number          "Pick Slip #",
         wdd.source_header_number          "Sales Order #" ,
         wdd.source_line_number          "Sales Order Line #" ,
    nvl(round(ool.unit_selling_price,2),0) "unitsell price" ,
    (nvl(round(ool.unit_selling_price,2),0))*nvl(wpsv.primary_qty,0) "Extended sell rice",
         '*'||wpsv.transaction_id||'*'          "Task ID" ,
         wpsv.transaction_id               "Task ID#" ,
         msi.segment1               "Item",
         msi.description               "Item Description",
         msi.segment1 || ' - ' ||msi.description               "Item - Description",
         wdd.requested_quantity_uom          "UOM",
         wdd.serial_number               "Serial #",
         wnd.delivery_id               "Delivery#",
         wpsv.from_subinventory          "Pick from Sub-inventory",
         wpsv.from_subinventory          || ' - ' ||
              SELECT
                   segment1||'.'||segment2||'.'||segment3||'.'||segment4
              FROM
                   INV.MTL_ITEM_LOCATIONS
              WHERE
                   inventory_location_id     = DECODE(msi.reservable_type,2,wdd.locator_id,wpsv.from_locator_id)
         ) "Pick From",
              SELECT
                   segment1||'.'||segment2||'.'||segment3||'.'||segment4
              FROM
                   INV.MTL_ITEM_LOCATIONS
              WHERE
                   inventory_location_id     = DECODE(msi.reservable_type,2,wdd.locator_id,wpsv.from_locator_id)
         )                    "Pick from Location",
         wpsv.to_subinventory "Deliver to Sub-inventory",
              select
                   segment1||'.'||segment2||'.'||segment3||'.'||segment4
              from
                   inv.mtl_item_locations
              where
                   inventory_location_id     = wpsv.to_locator_id
         )                    "Deliver to Location",
         wpsv.primary_qty          "Quantity to be Picked",
         party.party_name||CHR(10)||
         DECODE(ship_loc.address1, NULL, '',ship_loc.address1||CHR(10))||
         DECODE(ship_loc.address2, NULL, '',ship_loc.address2||CHR(10))||
         DECODE(ship_loc.address3, NULL, '',ship_loc.address3||CHR(10))||
         DECODE(ship_loc.address4, NULL, '',ship_loc.address4||CHR(10))||
         DECODE(ship_loc.city, NULL, NULL, ship_loc.city || ', ') || DECODE(ship_loc.state, NULL, NULL, ship_loc.state || ', ') || DECODE(ship_loc.postal_code, NULL, NULL,      ship_loc.postal_code || ', ') || DECODE(ship_loc.country, NULL, NULL, ship_loc.country) SHIP_TO_ADDRESS,
         NVL(h.shipping_instructions, '-') shipping_instructions,
         NVL(h.shipment_priority_code,'-') shipment_priority_code,
    NVL(OL.MEANING,'-') "Freight Terms",
         NVL(FLV.meaning, '-') shipping_method,
         NVL(QQA.quote_attachment, '-'),
         RSA.name,
         NVL(h.packing_instructions, '-') packing_instructions,
         NVL(H.CUST_PO_NUMBER,'-') customer_po#
    FROM
    apps.oe_order_lines_all ool,
         APPS.WSH_PICK_SLIP_V               WPSV,
         WSH.WSH_DELIVERY_DETAILS          WDD,
         INV.MTL_SYSTEM_ITEMS_B          MSI,
         WSH.WSH_DELIVERY_ASSIGNMENTS     WDA,
         WSH.WSH_NEW_DELIVERIES          WND,
         APPS.ORG_ORGANIZATION_DEFINITIONS     ORG,
         WMS.WMS_DISPATCHED_TASKS          WDT,
         APPS.OE_ORDER_HEADERS_ALL          H,
         APPS.HZ_CUST_SITE_USES_ALL          SHIP_SU,
         APPS.HZ_PARTY_SITES               SHIP_PS,
         APPS.HZ_LOCATIONS               SHIP_LOC,
         APPS.HZ_CUST_ACCT_SITES_ALL          SHIP_CAS,
         APPS.HZ_PARTIES                PARTY,
         APPS.FND_LOOKUP_VALUES          FLV,
    APPS.OE_LOOKUPS OL,
              SELECT
                   OOH.header_id,
                   MAX(DECODE(rownum,1, FDST.short_text, ''))||CHR(10)||CHR(10)||MAX(DECODE(rownum,2, FDST.short_text, ''))||MAX(DECODE(rownum,3, FDST.short_text, ''))||CHR(10)||CHR(10)||MAX(DECODE(rownum,4, FDST.short_text, '')) quote_attachment
              FROM
                   APPS.FND_ATTACHED_DOCUMENTS     FAD
                   , APPS.FND_DOCUMENTS_TL          FDT
                   , APPS.FND_DOCUMENTS_SHORT_TEXT     FDST
                   , APPS.FND_DOCUMENTS               FD
                   , APPS.FND_DOCUMENT_CATEGORIES_TL     FDC
                   , APPS.OE_ORDER_HEADERS_ALL          OOH
                   , APPS.ORG_ORGANIZATION_DEFINITIONS OOD
              WHERE
                   OOD.organization_id =?Organization ? AND
                   OOH.ORDER_NUMBER = ?SO#? AND
                   OOH.org_id = OOD.operating_unit AND
                   TO_CHAR(OOH.header_id) = FAD.pk1_value AND
                   FAD.document_id = FDT.document_id AND
                   FAD.entity_name = 'OE_ORDER_HEADERS' AND
                   FDT.media_id = FDST.media_id AND
                   FDT.language = 'US' AND
                   FAD.document_id = FD.document_id AND
                   FD.category_id = FDC.category_id AND
                   FDC.language = 'US' AND
                   FDC.user_name ='APS_Pack/AR Invoice/CI/SO Ack Printing'
              GROUP BY
                   OOH.header_id
         ) QQA
         , APPS.RA_SALESREPS_ALL RSA
    WHERE
         wpsv.move_order_line_id     =wdd.move_order_line_id          AND
         (wdd.source_header_number = ?SO#? )                    AND
         wdd.inventory_item_id     = msi.inventory_item_id(+)          AND
         wdd.organization_id          = msi.organization_id(+)          AND
         wdd.delivery_detail_id     = wda.delivery_detail_id          AND
         wda.delivery_id          = wnd.delivery_id(+)               AND
         wdd.organization_id = org.organization_id               AND
         wdt.TRANSACTION_TEMP_ID(+)=wpsv.transaction_id          AND
         wdt.organization_id (+)      =?Organization ?               AND
         wdd.organization_id          =?Organization ?               AND
         wdd.source_header_number      = h.order_number               AND
         h.salesrep_id = RSA.salesrep_id(+) AND
         h.org_id = RSA.org_id(+) AND
         h.org_id                = org.operating_unit               AND
         SHIP_PS.party_id          = PARTY.party_id(+)           AND
         H.ship_to_org_id          = SHIP_SU.site_use_id(+)           AND
         SHIP_SU.cust_acct_site_id     = SHIP_CAS.cust_acct_site_id(+)      AND
         SHIP_CAS.party_site_id     = SHIP_PS.party_site_id(+)           AND
         SHIP_LOC.location_id(+)     = SHIP_PS.location_id           AND
         H.shipping_method_code     = FLV.lookup_code(+)          AND
         FLV.lookup_type(+)          = 'SHIP_METHOD'               AND
         FLV.language(+)          = 'US'                    AND
         QQA.header_id(+)           = TO_CHAR(H.header_id)           AND
         wpsv.line_status          = 'UNPICKED'               AND
    H.FREIGHT_TERMS_CODE=OL.LOOKUP_CODE(+)
    AND OL.LOOKUP_TYPE(+) ='FREIGHT_TERMS' AND
    OOL.header_id = wdd.source_header_id(+) AND
    OOL.line_id = wdd.source_line_id(+) AND
         EXISTS(
              SELECT
                   'Y'
              FROM
                   INV.MTL_ONHAND_QUANTITIES_DETAIL OHQ
              WHERE
                   WDD.inventory_item_id     = OHQ.inventory_item_id     AND
                   WDD.organization_id     = OHQ.organization_id     AND
                   WPSV.from_subinventory = OHQ.subinventory_code
              GROUP BY
                   'Y'
              HAVING
                   SUM(transaction_quantity) >0
    ORDER BY
         2, 11, 12, 6, 3

    Thank you very much indeed for your reply - yes youre right. in oracle backend there are dropdown selections : 1) short text and 2) long text. as per the table user has to select short text so that he will get the correct output , but if by mistake user selects long text then the table is pulling wrong data. so here we need the query to be changed if user selects long text report shouldnt show any data..
    i am not sure but as per my little knowledge in oracle i believe that the problem is lying in the folloiwng query line.. please help me out in this regard. i have a screen shots of oralce backend where user is selecting long text / short text but here theres no option of inserting the files...
    DECODE(ship_loc.address1, NULL, '',ship_loc.address1||CHR(10))||
    DECODE(ship_loc.address2, NULL, '',ship_loc.address2||CHR(10))||
    DECODE(ship_loc.address3, NULL, '',ship_loc.address3||CHR(10))||
    DECODE(ship_loc.address4, NULL, '',ship_loc.address4||CHR(10))||
    DECODE(ship_loc.city, NULL, NULL, ship_loc.city || ', ') || DECODE(ship_loc.state, NULL, NULL, ship_loc.state || ', ') || DECODE(ship_loc.postal_code, NULL, NULL, ship_loc.postal_code || ', ') || DECODE(ship_loc.country, NULL, NULL, ship_loc.country) SHIP_TO_ADDRESS,
    Thank you very much once again
    Shiva

  • Wrong data in Cube

    I am getting data from two ODS(Budget and line items) flowing into Infocube....There are wrong results displayed in the report due to wrong data in cube...what are the best options to go ahead in such situations??

    Hi Shreya,
    If the data is wrong in the cube, but correct in the ODS then you need to check the update rules from the ODS to the cube to see how the data is being mapped. If you have any code in the update rules, you can try to debug the update them from the monitor screen. Is the data being doubled?

  • Wrong date after new photo

    The new Photo app was installed and some photos and full folders got the wrong date. I could not find a way to edit the date as single photo or from a folder like we had before on iPhoto. Is this something the developers forgot or there is a magic key combination to make it happen?
    Best Regards,
    GugaRibeiro
    Attached a screen shoot with a 2018 picture... the mac is now showing our future pictures...

    and to make things even more strange i just logged in to Photos online through icloud and  have a picture that was taken last Friday 1st May but online Photos is saying that it was taken 30 December 2014
    Photos app on MAC
    Photos app on Icloud.com

  • ICal prints wrong dates

    I have encountered a curious problem: my iCal (OSX 10.8.4) shows all the correct dates on my screen, but when I print the month of October/2013, the printout goes like this: ... / Friday Oct. 18th / Saturday Oct. 19th / Sunday Oct. 19th (!!!). Then, the following monday, which should be the 21st, is printed as if it were the 20th... After that, all dates until the end of October are wrong by one day. The funny thing is, when I print the month of November, it's OK!...
    So, careful out there, this may turn up somewhere else as well.
    This is clearly some kind of silly bug in iCal's printout module, somebody at Apple should look into it before they get somebody into trouble...
    -Raul

    Try clicking "Reset sync history..." in iSync prefs.
    Also, make sure that the Time Zone and Daylights Savings settings are correct in your phone. If not this will cause time shifts in events.

  • Downloads with Safari show wrong date

    Hi, this is my first post and I'm stumped.
    When I download a file (i.e. PDF) via Safari on either my Imac or Macbook (4.03 and 4.02) both running Leopard 10.5.7 it shows up in my downloads folder with the wrong date: wrong year, month, and day.
    When I download the same file with Firefox the download date is correct.
    Does anyone have any suggestions to remedy this annoying problem? Thanks.

    Ok. I just downloaded a PDF via Safari that shows the creation date as: 23/12/08 1:10 AM.
    Same file downloaded via Firefox shows date correctly: today at 9:16 PM.
    The date from Safari has been all over the map... 03, 07, 00 etc. all different.
    Message was edited by: i-Mack

  • Wrong Dates in Sent Folder

    After doing a clean install of 10.5 and importing all of my mail messages from my .mac account, I noticed that many of the messages in my sent folder had the wrong date. Apparently they were marked with the date on which I first synchronized my 10.5 Mail with my .mac account. I've since tried to rebuild that folder, and when I do that, those problematic messages show up as sent "Today" at the time I rebuilt, even though many of them are nearly a year old. Any suggestions as to what might be causing this? I've read several threads regarding problems with the sent folder, but none with this specific date problem.
    Thanks.
    One more thing...
    All sent message show up with the correct date when I access the sent folder online through .mac.
    Message was edited by: James Casey1

    I tried several experiments and noticed that if you move the messages in "sent messages" with wrong dates to another folder (for example to the "inbox") then they get back to their correct date.
    Apparently rebuilding mail boxes at this point doesn't fix anything, as if you move the messages into "sent messages" again then the date gets wrong again.
    Funny enough, when the message is back into "sent messages" and appears there with the wrong date, if you make a text search FROM THE INBOX on all folders in the search results these messages will appear as located in "sent messages" with THE RIGHT DATE!!! Doing the same search when you are in "sent messages" will show the message with the wrong date!!!
    So I am now sure there is BIG BUG in Mail about this.
    So unless Apple fix this, I guess the only way is to put all the messages from your "sent messages" with wrong dates in a folder where they appear with the correct date, save or export your "sent messages" folder messages, delete entirely your "sent messages" folder, and reload all you "sent messages" again.
    However I have no safe procedure for this and it won't prevent the bug to reoccur later on...

  • IPhoto imports photos with wrong dates even if the dates are fine on the camera

    Hi!
    When I import photos with iPhoto, sometimes it imports them with wrong dates, even the dates are fine on the camera. It puts dates such as 2032. Does anyone know how can I fix that. As far as I know there is no way to change dates of the photos.
    Thanks!

    well that is very confusing since if the date is correct on the camera it will be correct in iPhoto
    and as to
    As far as I know there is no way to change dates of the photos.
    Try looking through your iPhto menus - two commands - adjust time and date and batch change time and date - asjust is used to correct incorrect dates like a comera setting -   Batch change for missing dates like with scans
    LN

  • Report returns wrong data when run on server

    Hi,
    I'm runing CRS XI R2 on Windows Server 2003 SP2.  When I refresh a report in the Crystal Reports XI Designer, I'm getting correct data.  But when I schedule the report to run on the server it returns wrong data.  The data is different from what I see when I refresh it from the designer.  In the report I have running totals set up to count customers that meet a certain criteria.  The report is very large.  It take almost 2 hours to refresh.
    I was wondering what is causing the difference in running total data between refreshing it on the designer and running it on the server.  Is it returning wrong data b/c of it not reading all the records?  Should I be making any changes to the server settings?  I saw that under pageserver, there are options for  setting the 'Minutes Before an Idle Report Job is Closed' and 'Database Records To Read When Previewing Or Refreshing a Report".  Do either of those have anything to do with the report returning incorrect data when being scheduled to run on the server?
    Thanks,
    Kim

    Hi Xuandao,
    You would need to Use Cell Binding and Trigger concept to accomplish this.
    Its simple, however, you would have to work on a trial and error basis to understand this concept as implementing the same is subject to your dashboard and WEBI Design.
    Open you LiveOffice.
    Insert your WEBI, Now, go to Object Properties of your WEBI, select the second tab that says Prompt, Here, it lists the prompts that you have for your WEBI. This would also enlist your BEx variables as well. Select this BEx variable and click on the button that says Prompt at the bottom of this window. Here, select choose Excel Data Range and click on the cell select button on the right (small button that lets you choose what cell you want to bind this prompt to), Now select a free cell that would not be even populated later on when you run the dashboard say A1 (remember the value that you select). Click on OK and again OK. The WEBI Refreshes and you can see all the prompt values at the cell A1. These are all the possible values stored for your BEx prompt variables (these values are fetched from BW system dynamically).
    Now, save this LiveOffice, Go to you dashboard. Connect your dashboard to your Live office. Go to Data-> connections-> Now, select the WEBI and in the right hand pane  go to Usage tab, here, Click on Trigger cell button on the right hand side and select A1 in you LiveOffice.
    It should work fine.
    Let me know.
    Rgds,
    Sreekul Nair

Maybe you are looking for

  • How Can I Unbrick My 1.1.4 iPhone?

    I live in the UK and I bought my iPhone off eBay. It was unlocked and jailbroken on 1.1.4 software, so i used my own pay as you go simcard. My Iphone started to freeze all the time last week, and i found out that restoring the iPhone could help. I re

  • TS2951 after installing snow leopard 10.6.3 from tiger 10.4.11 everything upgraded and opens correctly except the dock. It is still running with the old dock.

    help, the original HD (10.5.8 leopard) crashed and i replace it with one a little smaller HD (10.4.11 tiger). It was real jerky and i couldn't play a lot of my games. Since I had always wanted to upgrade to snow leopard anyway I did. Always wanted to

  • Regarding BP number search and deletion

    Hi Gurus, I have some doubts in BP. 1) If I open BP and do start it only shows 100 nos max. Can I extend ti to all the bp available. 2) I had created the ord model and this org also treated as a bp master data. I deleted the ord model and deleted the

  • Any hope for Passbook on iPad 2?

    I know Passbook isn't on the iPad 2 - which I was extremely disappointed - but I wonder if there is any hope that an update might come out to put Passbook on the iPad 2?  I have read forums that talk about this being the NFC for apple and the iPad do

  • Cannot Recognize Drive / Deleted Partition Mapping?

    So, I was moving partitions in VolumeWorks and accidentally ejected the Lacie Disk. Now whenever I try to use it i get this: [img]http://img141.imageshack.us/img141/4281/erroram9.jpg[/img] I clicked initialize once, but I closed DiskUtility and it ne