SM37 - Not displayed all columns in results

Hi all,
I would like to ask you for help - I need to download some data from BSEG. Via SE16 I define criteria in BSEG (customer numbers, fiscal year etc.) and via Setting - List format - Choose fields select 5 columns that I need to have as output.
If I use background processing, I don't have displayed only 5 columns that I need, but 64 from 285 fixed columns. The columns that I need, have higher number than 64 therefore they aren't displayed.
Is there any possiblity how to display all columns?
Thank you in advance.

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Similar Messages

Table not displaying all column

hi my table>adf table does not display all column when i run the application it only display the first three column but in design it display all column

hi user,
i think so some panelcollection is closely strecthed, so only this problem.
go to panelcollection make it as styleClass=" AFStretchWidth" .
solution:
if you are used panelcollection inside af:table means it will suits.
or else go to the af:table add this
styleClass=" AFStretchWidth"
columnStretching="last"
or else some problem:
please elaborate or else paste the part of the code.

Out put in Background (SM37) not showing All columns

Hi Folks,
Im creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->spool ->view (display).
Why its happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen youll see properties hit that, itll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns.
Hope thisll help you .
Hope thisll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

The BI report created by Query designer does not display all columns

Dear Experts,
I have created a BI report using the Query Designer.
When I execute the query, only 6 columns have been displayed.
The total columns are 12. I need to display all 12 columns at the first instance.
Could any one help me to resolve this problem?
Thank you very much!
Arthur

Hi Athul,
Thanks for your reply.
There is not marked for '.Supress Zero' in the Rows and Columns.
And I did not check for 'Hide repeated values' in the Display tab.
Any other place you could suggest to verify?
Thanks
Arthur

ADF FACES: af:table not rendering all columns

I'm using ADF EA 17 with myFaces 1.0.9 on JBoss 4.0.1/JVM 1.4.2_07-b05. The af:table is embedded within an af:panelgroup (being body of af:panelbox).
The af:table is not rendering all columns (only last 2 out of 8 cols total). The model behind the af:table is a java.util.List. Debugging shows that the list is filled up with beans correctly and that each of the properties of such a bean corresponding to a table column are also set correctly.
Strange thing is that sometimes all columns are rendered ok. Especially if i make heavy changes on the jsp (e.g. removing all but 2 cols from the af:table) and dropping it into the .../jboss/server/../tmp/deploy/tmpXYZ-exp.war directory. Restarting JBoss results in the old behaviour. Also closing browser and re-opening it yields to the missing columns again.
I've set breakpoints on the bean properties representing on table column and i can see, that the getter methods aren't called (all but those 2 that get rendered finally)
Table has multiselection enabled with 1 command button.
This happens with both IE 6 and Firefox 1.0.4; no oracle, myFaces exceptions visible on console or any log file.
Has anybody made same experiences so far or an idea what the problem really is ?
best regards,
Christoph.

I've tried it also with a plain af:table without any surrounding af:panelgroup or/and af:panelbox. Same result.
The bean holding the table-model (the java.util.List) is in session-scope. the table-model is update by an actionListener fetching values from an EJB. Could the session-scope be a problem ?
Potential candidates from my point of view, that might cause trouble here:
--) Caching (i've seen that sort of "CachedRenderers" are used
--) partial page rendering
--) multi-threading issue.
--) or any silly mistake of mine :-)
best regards,
Christoph

Finder not displaying all files in remote directory

Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
Why isn't Finder displaying all of my files?

thanks for responding
Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
Any more ideas?

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

DWMX Not Displaying All Files

Hello folks. This is my last attempt to locate a solution for
why my DWMX is not displaying all my files in my local or remote
folder. I have a new client who has put us in charge of moving
their site to a new server. When I create a new site in DWMX, it
allows me to download and upload just fine, ALL of the site.
Problem is, DWMX will only display a certain number of files in
both the local and remote views. In my windows explorer, it shows
all the files, on the new server it shows all the files, but DWMX
will not. The folder in question is the dumping ground for all
their self-managed content images for their site. So it is hard to
split these up into multiple folders and expect the code to work
properly.
Has anyone else experienced this problem? If so, is there a
solution to this problem with DWMX?
Thank you.

Are you using DMX6.0 or DMX6.1? If the former, please update
to the latter
at your earliest opportunity - use the updater on the Adobe
site, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"csnetworks" <[email protected]> wrote in
message
news:fai93r$hj$[email protected]..
> Hello folks. This is my last attempt to locate a
solution for why my DWMX
> is
> not displaying all my files in my local or remote
folder. I have a new
> client
> who has put us in charge of moving their site to a new
server. When I
> create a
> new site in DWMX, it allows me to download and upload
just fine, ALL of
> the
> site. Problem is, DWMX will only display a certain
number of files in
> both the
> local and remote views. In my windows explorer, it shows
all the files,
> on the
> new server it shows all the files, but DWMX will not.
The folder in
> question is
> the dumping ground for all their self-managed content
images for their
> site.
> So it is hard to split these up into multiple folders
and expect the code
> to
> work properly.
>
> Has anyone else experienced this problem? If so, is
there a solution to
> this
> problem with DWMX?
>
> Thank you.
>

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Query not displaying all records when execute it first tme

Hello,
i have an issue with the WEBI report.when i run the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
Could any one tell me why it's not displaying all records when i execute first time.
Thanks in advance for your help.
Regards,
Prathap

Which BOBJ version do you use?
Which kind of data source are you retrieving data from?
Regards,
Stratos

Filter not displaying all values

When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
Is there a setting I am missing?

I think that your description of the problem doesn't help a lot. Are you using interactive reports?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

SSAS Date Dimension attribute not displaying all members when browsed singly

I have an SSAS Cube database that holds data from 2009 to 2013 (5 years)
There is a Date Dimension in the database which holds a "Calender Period" Hierarchy with the attributes CalenderYear >> Quarter >> MonthYear >> Day .
I am connecting to the cube via Microsot EXCEL
Whenever i try to browse this hierarchy alone in the spread sheet, the first attribute as per the hierarchy shown above i.e. Calender Year does not display all the members, that is confusing the users to assume that the cube is not processed with the latest
data, which is not the case. However as soon as i try to browse any measure with this dimension, the data automatically shows for the latest dates of 2013 as per the expectations.
The perspective that is selected while connecting to the Cube in this case is the one that is by default the one including all the Cube Objects.
Whenever i try to browse the same cube for the same Dimension Hierarchy but in a separate user perspective i get the latest three Calender Years i.e. 2011,2012 and 2013 but not the complete years 2009 to 2013.
When i was browsing this earlier by the original base perspective (which has all the cube objects visible) the Calender Years displayed were 2009,2010,2011&2012 but not 2013 which should be there.
I checked the base view in the DB that is used to create this Dimension, that is fetching the complete data for 2009 to 2013.
I have also verified that this issue is still there if i try to browse the cube from the SSMS.
Can anyone help me to get all the years from 2009 to 2013 (the years for which my cube has data) become visible as soon as i drop it alone into the Spreadsheet?
Thanks
Suvrat

Thanks for your response Muthukumaran.
I did not know about this default measure property of the SSAS cube, it would be nice if you could also tell me how to check which is the default measure for a cube.
I understand your point that if a particular measure group does not have data for a year then that particular year will be skipped as per the default excel settings, which when disabled allowed all the years to be displayed, but in that case every time the
users connect to the cube via excel, they will have to configure this property.
I would like to share the way i resolved this issue:
I went ahead and simply did a Process Full for the Date dimension. The years started to display by default as per the expectations. Now after observing this change, as per my understanding I believe this issue was due to the CACHE of the cube not being updated
for the date dimension. As after each incremental load of the DWH we processed the cube & while processing the cube the dimensions were set for a Process Update and the Measure Groups were set for a Process Full. This caused this issue, and we could resolve
this once the Date Dimension was processed full.
Thanks
Suvrat Rai

SM37 - Not displayed all columns in results

Similar Messages

Maybe you are looking for