SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Trying to send Idocs from SAP ECC6.0 via PI 7.0 up until 2 days ago there was no problem.
Since yesterday, only one specific type of Idoc does not make it into XI (PI). In the Idoc monitor (WE02) the idocs that were created gives status 3 which is good. But all Idocs of that specific type (ZRESCR01) does not go to XI. I can only find them bakc in SM58 where it gives the following message:
IDoc adapter inbound: IDoc data record table contains no entries
I have checked SAP notes 1157385 and also 940313, none of them gives me any more insight into this error. I have also checked all the configuration in WE20, SM59, and in XI (repository and directory) and in XI IDX1, IDX2 but could not find anything that would cause this. I can also not think of anything that changed since 2 days ago.
Please point me in the right direction.

hi,
i think in sm 58 u can find entries only when there is some failure in login credential .
if there is change in IDoc structure than you have to reimport the idoc metadata defination at IDX2.otherwise not requird.
please check the logical system name pointing to the your requird target system....
please also verify thet your port should not be blocked.
pls find the link it may help
Monitoring the IDOC Adapter in XI/PI using IDX5
regards,
navneet

Similar Messages

IDoc adapter inbound channel: Error Fehler beim Le

Hello,
I have a BIG problem. I want to use IDOC - XI - IDOC. I have configured the connections. But when I send the Idoc to the XI. it returns a code in the SM58 "IDoc adapter inbound channel: Error Fehler beim Le" The Message comes cut, it doesn't return all the message. In the XI doesn't give me any error, nothing. The IDOC says thta it has been sent correctly (Code 3). How can I trace the IDOC from de sender to the XI?
I wanted to use the IDOC HRMD_A06 but now i'm trying with SYIDOC to see if it passes.
Can Someone help me?
Caller Function module Target system Date Time Status text
SRGEN13 IDOC_INBOUND_ASYNCHRONOUS RHXCLNT013 07.04.2006 10:06:46 IDoc adapter inbound channel: Error Fehler beim Le
Thank you
PM

I want to know if the Connections have to have SNC?
I have read this in the note http://help.sap.com/saphelp_nw04/helpdata/en/ca/fafaf6dbc8b240b1cf4a88c40379b2/frameset.htm
Inbound and outbound connections should be secured by Secure Network Communication (SNC).
Is that correct? maybe that's why it says the that error
PM

IDoc adapter inbound channel: Error Error when reading Exchange Profile

Hello Experts,
Currently i am working on an IDOC to file scenario, in which Data will be sent from ECC server (IDOC) to an FTP server via SAP PI, but when i try to send IDOC to PI, i am getting the following error
in Transaction SM58:-
'IDoc adapter inbound channel: Error Error when reading Exchange Profile for system XID and
client 401 occurred in the IS pipeline' .
Can anyone please help me on this.
Thanks & Regards,
Amit Naik

Hello Experts,
Let me explain to you the whole scenario, We have two servers of PI, 7.1 & 7.0. Now the Java Stack of 7.0 is not working & Cache update of 7.1 is not happening.
Thats why we have linked ABAP stack of 7.0 with Java stack of 7.1. Now we can see the objects created under Java 7.1 in ABAP stack of 7.0 (SXI_CACHE).
Now we have done all the settings to create an IDOC to file scenario. All the RFCs are working fine, but when we send an IDOC from the ECC system to ABAP 7.0, we are getting the following error 'Error while reading exchange profile for system NW' in SM58 .
Now can anyone tell me what exact settings i have to change in the Exchange profile (Java stack of 7.1), so that the Java 7.1 & ABAP 7.0 connection is setup or do i need to change anything else.
Thanks & Regards,
Amit Naik

IDoc adapter inbound channel: Error Error while read

Dear All
I am sending idoc from SAP 4.6C to PI. But on SM58 I am getting an error
IDoc adapter inbound channel: Error Error when reading
Which is not complete because field length is 50 characters , double clicking on this message is asking for message class. How can i see the complete message.
Can any one send me configuration detail of receiving IDOC at PI end , I don't want send to it forward from PI.

Please clear these points.
In PI system:
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system.
3. Using IDX2 import the IDOC meta data in to your PI system.
RFC destination to which direction , towards sender of IDOC ?
Port of which system sender system or receiver system?
What about configuration in Integration Directory , is there any configuration required on integration repository and on integration directory.
What will be the procedure of seeing complete message on SM58.
-->In PI system while ur creating the RFC destination of type 3 give the hostname and system number of ur R/3 system ie SAP 4.6 c.
-->In PI create Port using the IDX1 t-code port name should be SAP + SYSTEM ID OF R/3 system and in that RFC destination option, maintaine the destinatination name which we created using sm59.
-->coming to IR you need to create the:
                    1. Receiver data type.
                    2. receiver message type
                    3. receiver message interface. No need to create the above 3 for sender.
                   4.while mapping source is your Idoc and target is your receiver message type.
                   5. while interface mapping source is Idoc and target is receiver interface.
-->Coming to ID no need to create sender communication channel and no need to create sender agreement.
-->create receiver communication channel and receiver agreement.
--->create Interface determination.
-->create receiver determination.
-->If message got stuck in SM58, unlock it by using double click or activate the selected message.
Thanks

IDoc adapter inbound channel: Error Connection err

Hi,
We are trying to push an IDoc from R3, it's status is green in WE02. However, the IDoc is not reaching PI.
In tcode SM58 in R3 we are getting an error "IDoc adapter inbound channel: Error Connection err". I have gone through the SAP note 940313 but was not able to figure out the exact cause of error.
Any help would be appreciated.
Regards
Pravesh

Hi,
Please check the steps for Idoc posting to SAP PI system from R/3. Probably you are missing some configuration.
Few Checks -
1. did you created Logical System using BD54?
2. Create RFC destination Type 3 for PI
3. create partner profile using we20
In Pi
Check following
1. Create RFC destination of type 3 pointing to R/3 system.
2 . create Port using the IDX1
3. Using IDX2 import the IDOC meta data
Regards
Aashish Sinha

IDoc adapter inbox: IDoc sender partner is initial

Hi,
I have requirement to read the IDOC flat file and post IDOCs to SAP. As suggested in the following guide I am using report RSEINB00 to post IDOCS. This report basically calls the function module IDOC_INBOUND_FROM_FILE.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20convert%20between%20idoc%20and%20xml%20in%20xi%203.0.pdf
While executing the IDOC_INBOUND_FROM_FILE I am getting error:
"IDoc adapter inbox: IDoc sender partner is initial".
Please advise.
Thanks
Rajeev Gupta

Hi,
Idoc will be processed in SAP ECC based on the sender details (snprn,sndpor,sndpfc...) of idoc control record..
instead of different partners name sending in the sender details of control record ...pass the value of the PI logical system name in SNDPRN.... (use only one and this is common for all partners...) any how data records of idoc will have the needed partner details...
In SAP ECC you need to have this logical system ...to process the received idocs..
thats it... Hope you got
Regards
Rajesh

Why we use IDOC adapter for IDOC as reciever?

hello,
Why we use IDOC adapter while using IDOC as receiver, whereas we don't use IDOC adapter while IDOC is sender?
I am clear about why we don't use adapter for sender IDOCs.
Thank you.
Sarika

Hi Sarika,
>>>>Why we use IDOC adapter while using IDOC as receiver,
maybe the easiest answer would be that we use
IDOC adapter as receiver to tell the XI where he should
send the data - there are many systems to which we can
connect our XI and somewhere there has to be an object
which will tell thx XI "where to" -> which RFC destination should it use
BTW
I believe IDOC apdater is also used as sender
although you don't configure it in AF:
"Once the IDoc has left the application through the RFC interface and has reached the IDoc adapter at the Integration Server inbound channel, the system converts it from IDoc format to IDoc XML format"
from:
http://help.sap.com/saphelp_nw04/helpdata/en/b9/c5b13bbeb0cb37e10000000a11402f/content.htm
Regards,
michal

Relating outbound idoc to inbound idoc to create a document

We have a requirement to relate the outbound idoc to inbound idoc , transfer the data and create a document.
Kindly let me know the tcode / configuration steps of how can we relate the idocs.
Thanks,
Nalini S.

Hi Juan,
Check the IDOC: WMATGRP01. Hope it will be helpful for you.
BR,
Lokeswari.

How can I find a data base table containing a GUID, which is result of the macro's execution?

Hello,
please help me to understand how the macros work. I am facing database inconsistency. The CRM-system retrieves a GUID of an opportunity’s item and checks its existence. However, this GUID (here it is es_info-ref_object) does not exist. As result, an exception is triggered.
I am trying to figure out which data base table is responsible for the inconsistent data. Instead of SELECT statement, I see in the debugger that a macro retrieves the “guilty” entry .
macro_execute macro_msg_data_read_rea.
My Question: How can I find a data base table containing a GUID, which is result of the macro’s execution?
Thanks a lot
Andrej

When you save a PDF out of Distiller it doesn't just have different options, it's an entirely different program. It doesn't do things the same way, so it can't have the same options. Saving from Distiller is in many ways better, expecially in that transparency isn't flattened.
What specific options are you looking for?

Receiver IDoc Adapter - Outbound IDocs in IDX5 but stucked in SM58

Hi Gurus,
I have a Receiver IDoc issue with the above error.
My message is successful in the IE pipeline (but with error on outbound side)
I can even view the generated IDoc numbers for those messages in IDX5,   but when double-clicking on those IDX5 entries SM58 is called and there I see the error as follows:
Caller: PIAFUSER
FM: IDOC_INBOUND_ASYNCHRONOUS
Status Text: No Authorization to send IDocs with Message Type 0
The weird thing is why is the caller showing as PIAFUSER, when my RFC destination is using a custom RFC user id.
Shouldn't it be that the Caller be my custom RFC user id since this is the user used by the RFC destination i specified in the receiver idoc comm channel?
Would anyone of you know how to resolve this?
I have already implemented Note 837595 for (a) my custom RFC user id in the target system (b) PIAFUSER and PIISUSER in my Integration Server; and assigned SAP_XI_APPL_SERV_USER role to PIISUSER also as specified in http://help.sap.com/saphelp_nwpi711/helpdata/en/d4/d12940cbf2195de10000000a1550b0/content.htm
I am aware that IDoc should be sent to the receiving system by using the IDoc adapter and NOT by using the IDoc Interface (tRFC port)
Thanks in advance

Hi All,
I resolved this on my own.
The steps i specified in my 1st post (Note implementation & Role assignment) was not enough, we had to assign SAP_ALL & SAP_NEW to the rfc user.    The Note implementation & role assignment should have solved this problem, but strangely it was not enough.
As for the question on why PIAFUSER is showing up as the caller and not the RFC user id used in the rfc destination used by the port, it's because the original caller is what gets recorded in SM58, in this case Receiver IDoc adapter on the AE so PIAFUSER,   and not the RFC user id.   you can verify this in table ARFCSSTATE
Thanks to all answers

Which data base tables contain SCM customer code

Friends,
I am writing an user exit for VA01/VA02/VA3/VA32.
I am getting the customer number from VBAK-KUNNR when I execute any of the above transactions.
According to functional sepecification, we can find SCM code in the data base table ADRC.
(we can fetch the data from ADRC table where ADRC-ADDRNR = KNA1-ADRNR; ( KNA1-KUNNR = VBAK-KUNNR))
I could not find SCM customer code in the table ADRC.
Please let me know the Data table and field to find the SCM customer code in SAP.

Hi Reddy,
 >> As in SCM the company codes exist in the table ' T001 '.
 Corresponding field for it is ' BUKRS '.
 >> U can use ' ADRNR ' as a key field in ' T001 ' table and
 relate with your KNA1- ADRNR using Joins for user exits.
Feel Free to ask any questions regarding this...
Hope it Helps...
Regards,
Dhayanandh.S
Message was edited by:
 DHAYANANDH SIVASANKARAN

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

How Many NUMBER Fields Can SINGLE DATA BASE TABLE CONTAIN

Hi
One Database table contain 249 Fields.
Rewards Points if useful..
Regards
Nikunj Shah
Edited by: Nikunj Shah on May 13, 2008 1:08 PM

Where can get IDOC Error Message from Data base tables

Hi ,
i am automating idoc checking process,in which i am getting control record from EDIDC tables,now i need to fetch Error message
using this idoc no.
How can fetch error message text ?
Thanks in advance.
Regards
sarath

Hi its a structure, it doesnt store data.
Take it from the table specified,
Pass STAMID,STAMNO,STAPA1,STAPA2,STAPA3,STAPA4 to function module MESSAGE_PREPARE and you will get the message text.
Also check the function module IDOC_READ_COMPLETELY

Database Adapter: Selecting all data from table

Hi All
I am new to SOA Suite and I am using Soa Suite version 10.1.3.1 and Jdev version 10.1.3.3. It is required to select data from one database using the database adapter and insert it in a table in another database. I implemented the flow using DBadapters select operation the problem is everytime I am running the instance it transfers only one row though no condition has been specified on the select. Could anyone please help me out and let me know how to transfer a complete table from one database to another using DBadapters and in a single instance.
Thanks

Well Stupid me, got the answer, I think m just at the begining of the learning curve.

Does WCF-OracleDB adapter support XMLType data for table select operation

I am getting this error When I do the consume adapter service for Oracle table select operation on one of the tables which has XMLType column. It's working fine for other tables.
Microsoft.ServiceModel.Channels.Common.MetadataException: Retrieval of Operation Metadata has failed while building WSDL at 'http://Microsoft.LobServices.OracleDB/2007/03/XXXX/Table/table_name/Select' ---> Microsoft.ServiceModel.Channels.Common.MetadataException:
Incorrect Type: XMLTYPE. Possible causes: 1. Permission issue 2. Unsupported type.
at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveTypeMetadata(String nodeId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetTypeMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetTypeDefinition(String typeId, TimeSpan timeout)
at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveTypeMetadata(String nodeId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetTypeMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetTypeDefinition(String typeId, TimeSpan timeout)
at Microsoft.Adapters.OracleDB.OracleCommonMetadataResolverHandler.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at Microsoft.ServiceModel.Channels.Common.Design.AdapterExceptions.ThrowMetadataException(String errorMessage, Object arg, Object source, Exception innerException)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.SearchBrowseNodes(MetadataRetrievalNode[] nodes, WsdlBuilderHelper helper, TimeoutHelper timeoutHelper)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GenerateOperationSchemas(WsdlBuilderHelper helper, MetadataRetrievalNode[] nodes, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.WsdlBuilder.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
at Microsoft.Adapters.OracleCommon.OracleCommonWsdlRetrieval.Microsoft.ServiceModel.Channels.Common.IWsdlRetrieval.GetWsdl(MetadataRetrievalNode[] nodes, Uri uri, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataGet(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataExchanger.ProcessMetadataMessage(Message message, Uri target, TimeSpan timeout, MetadataLookup metadataLookup, Message& replyMessage)
at Microsoft.ServiceModel.Channels.Common.Channels.AdapterRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Dispatcher.RequestChannelBinder.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.ServiceModel.Channels.IMetadataRetrievalContract.GetMetadata(MetadataRetrievalNode[] nodes)
at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataPanel.GetWsdl(MetadataRetrievalNode[] nodes)
at Microsoft.ServiceModel.Channels.Tools.MetadataSearchBrowse.MetadataPanel.btnProperties_Click(Object sender, EventArgs
My table has XMLType column which is also included for select.
Thanks

Hi Van&boatseller,
The duplicate thread has been deleted, and thanks for your feedback.
Best regards
Angie Xu
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SM58 - IDoc adapter inbound: IDoc data record table contains no entries

Similar Messages

Maybe you are looking for