Smart Playlists no longer working on my 4G iPod

I have a 20GB 4G Mono iPod that is running the latest firmware version (3.1.1) and I have several Smart Playlists I use frequently with it.
Before I upgraded to iTunes 7 last week these playlists would dynamically update on the iPod itself without the need for me to synchronize with iTunes (this was also a bug introduced in firmware 3.1 and corrected in 3.1.1). Now the "smart" playlists on the iPod act just like static playlists: if I play a song that is supposed to be removed from the playlist once the song finishes, it doesn't until I sync with iTunes.
Is anybody else experiencing this issue?
I have tried restoring my iPod just in case.

Well, 7.0.1 doesn't fix this for me, but downgrading to 6.0.5 did. I followed the first four steps here:
http://macslash.org/comments.pl?sid=6335&cid=112858
Then, while keeping the "iTunes Music Library.xml" file in ~/Music/iTunes, I made a new "iTunes Library" file (instructions at the bottom of this link):
http://www.mani.de/en/software/macosx/ivolume/faq.html
Then installed 6.0.5 and dragged the xml file onto the new program file to import. The new groupings (movies, podcasts, etc.) turn into playlists at the bottom, but can be easily deleted.
This will allow downgrade while keeping play count, ratings, etc. intact; I did lose artwork for all the songs for which I had downloaded the art from iTunes store, and iTunes is recopying those songs to the iPod, but I'd rather have the playlists update on the iPod than have the artwork.
iBook G4 1 MHz   Mac OS X (10.4.7)  

Similar Messages

  • V2.0 - Smart Playlists No Longer Working

    Hello all,
    The Shuffle Songs routine in V2.0 is just as bad as in V1.1. We constantly hear the same songs over and over and some songs we never hear. To solve this problem I was advised to create a Smart Playlist that would only play songs with a play count of 0. This worked great in V1.1 but does not work in 2.0.
    I am streaming through iTunes. Looking at the iTunes Smart Playlist, it is working correctly and removing a song once it has been played once. But no many how many times I reload that particular iTunes library, previously played songs are still being shown in the playlist when I select it on the ATV. And of course, ATV likes to play the same songs over and over again from it while on shuffle.
    Any suggestions?

    FYI...
    Reset ATV, no change... Deleted Smart Playlist and recreated, no change... Deleted Smart Playlist and recreated with a DIFFERENT NAME than before, it now works as before in V1.1.
    Go figure...

  • Podcast playlist no longer works

    I just synced my ipod nano, and my podcast playlist no longer works. This seems to be due to an upgrade to iTunes 9. It seems to only want to deal with music files in playlists, not podcasts. What am I doing wrong?

    Found an answer in the following thread:
    http://discussions.apple.com/thread.jspa?threadID=2152465&start=0&tstart=30

  • Smart playlists no longer live update

    I wrote in about this once before but got no solution. I use a smart playlist on my ipod touch to give me only podcasts with less than 1 play, so that I only get the new ones. When I got the ipod for Christmas, and until about late January it was working fine. All of the sudden it stopped live updating, and now only does it when I sync. This really ***** because I listen to about 25 podcasts a week, so it can be very confusing as to which I've heard and which I haven't. Is there any solution for this? I've tried using podcast = true and genre = podcast, but neither will smart update. As I said it worked fine previously, so it's not that podcast = true is completely broken, as I've heard it said elsewhere.
    Any help much appreciated.

    Sorry about that, I must have misunderstood.
    This is the situation in detail.
    When it worked:
    A podcast would download. It would instantly appear in my smart playlist labeled "podcasts".
    The playlist has the rules "podcast = true" and "playcount = less than 1".
    I would sync my ipod.
    I unplug the ipod.
    When I listened to a podcast on my ipod completely (until the very end), the podcast would be removed from the smart playlist immediately, even though my ipod wasn't plugged in.
    Now:
    A podcast downloads. It appears instantly in my smart playlist.
    I sync my ipod, and it appears in the smart playlist there too.
    I unplug the ipod.
    I listen to a podcast (every second of it) through the playlist. When the podcast is over, that podcast remains in my playlist, despite having a playcount greater than 1.
    When I listen to podcasts on my computer directly via the smart playlist, it IS live updated. That is to say that when the podcast ends it is immediately removed from the playlist. That's what I want to happen on the ipod when it isn't connected to my computer, just like it used to.

  • Installed Maverick - smart art no longer working on either Word or Excel Need Help

    Installed Maverick and found that on both Word and Excel the "Smart Art" no longer works.  I reinstlled software but that did not solve the problem.
    NEED HELP
    Thanks

    Your issue seems to be only with those two apps, first check to see if they are up-to-date and if you still have issues please post in the Office for Mac Product Forums

  • My playlists no longer sync correctly to my ipod touch

    My playlists no longer sync correctly to my ipod touch. They used to until i recently upgraded my itunes. They also are not in the same order as they are in my itunes.

    Running 10.7
    Error Message = iTunes will no longer sync notes to the iPod "Paul D. Butler's iPod4".  Do you want to keep or remove notes previously synced to your iPod?
    Then two buttons.....one Keep Notes......one Remove Notes

  • My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    My smart cover is not working on my new iPod 3 ( wifi 4g ) even the smart cover option is not in my setting menu but mIn my wife device it is working good would help me

    The setting for iPad cover lock/unlock is in settings > general for iPad 2.
    The iPad 2 and new iPad if both are using iOS 5.x or later the setting exist in settings > general.
    So, if you worked at an apple store I think you should have known that the setting exist.
    You are right, a hard reset (force restart) should only be used if iOS device is unresponsive or apps crashing...etc.
    But, a simple restart helps as well.

  • My smart playlist no longer seems to work when it comes to ratings?

    This is a bit weird. I have like 40 podcasts under one podcast (I'm behind in listening to them). Rather than copy all of them to the ipod I created a smart playlist that had these rules:
    Podcast is true.
    Artist contains XXXX (xXXx= name of the author)
    Rating is at least * (I use one star and select the one's I want to listen to based on stars).
    Then I sync the smart playlist to my ipod.
    Now, all the ipods show under the smart playlist and I can't get them to go away. I would think the rating is the problem. I've "selected all" and changed the rating to "none" but the podcasts all still show under the smart playlist.
    Any idea what has happened or what I'm doing wrong?
    Thx.

    I figured this out on my own. I noticed when looking at the smart playlist that somehow "one star" had become noted for the ENTIRE series. So it was copying everything over.

  • Smart playlists no longer update dynamically

    I have several smart playlists that have a couple of rules... one based on rating and one based on whether or not it is present in a regular playlist.  When I change the rating of a song so that it no longer meets the smart playlist's criteria, it remains in the list.  It will not update until I sync with the PC.  The other criteria, the "regular" playlist, isn't updated... and is present on the iPod as well in my iTunes library, so that's not the issue.  I'm running the latest greatest version of iTunes and the iPod touch is a model PD721LL/A, version 8.2; it has over 15GB free, so space isn't a challenge either.
    I suspect that there is some sequence of settings that will allow this to update dynamically, but I'm not sure what that would be or where to even attempt it. 
    Any suggestions would be greatly appreciated!
    Thanks in advance,
    Laura Tieri

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Smart Playlists no longer updated with iOS 4.3 on iPhone 4

    I've run into an issue with the latest iOS 4.3 update: my smart playlists are no longer dynamically being updated on my iPhone 4.
    All of my main playlists are smart: they exclude songs that I've played in the past week. Earlier today when I'd play a song and it went to the next one, it'd immediately remove the song from the playlist (so I was always on track 1 of XXX). With 4.3, this is no longer happening and the smart playlist only dynamically updates when I sync my phone with my computer. This is annoying because it means that I can end up hearing the same song again if I switch playlists.
    Anyone else run into this? Any fixes? I tried rebooting my phone to no avail.

    My results differ from yours.
    With iOS 4.0x, 4.1 and 4.2x my smart playlists with live updating were broken. It would start with track 1 of 5, then 2 of 4, then 3 of 3, 4 of 2, then would generally crash the iPod app. If I left the playlist and re-entered it would have removed the entries already played, but I would find that some of the entries that should have played had actually been skipped in m playlist.
    With iOS 4.3, my playlists are properly working for me again. Now they play 1 of 5, 2 of 5, 3 of 5, ... If I return to the playlist while it is playing, I see that the entries that have already played are removed, and if I leave the playlist to return later, it starts over a 1 of 2, 2 of 2...
    I have posted another thread of how I have my playlists defined, so perhaps that would help you. I do recall that there were some conditions that used to cause problems if used in a smart playlist.

  • Smart playlists;  no longer smart in version 3  how to tell Apple?

    Since iphone and ipod version 3 & itunes 9 smart playlists will not sync onto ipod. Several posts relate to this. Apple has posted a complex set of solutions, including to disable live updating. The later works but eliminates the value and purpose of smart playlists as a means to manage subscriptions and updates.
    The final solution is to create a second smart playlist with the rule "playlist is (name of first playlist)". That works but is far too complicated for the average user, and has made my playlist panel into double the size with half the convenience.
    If anyone knows how to contact Apple with a request for an acknowledgment that they need to fix this problem I would appreciate it. Two updates later, no fix, not even a promise to try to fix.

    Anna:
    Yes, I am fully updated. The last update did not resolve the smart playlist jumbling.
    The solutions mentioned in my post were in fact published by Apple at this link http://support.apple.com/kb/TS3044
    That would be fine but it tends to suggest that the user is doing something wrong that has to be "changed" when in fact the problem arose with the latest software versions, and the user workaround is clumsy and unsatisfactory.
    I will try using the feedback form

  • Live Updating Smart Playlist... but not live updating iPod?

    I have several video files that I want to convert to iPod-compatible MP4. I have a program to do the conversion in a batch mode and then add the files to my iTunes library.
    I also have a live-updating Smart Playlist (for all files where the Kind includes 'video' and the playcount is 0) to catch these files as they come in. I have this playlist as one of the ones set to be automatically updated on my iPod.
    However, in my test runs, the video is properly converted and added to my iTunes library, and the Smart Playlist picks it up as well. However, it does not then send the file to my iPod (which is already in its dock) unless I first eject the iPod and reconnect it.
    I'd really like to get this working, as I'm hoping to do this on a somewhat regular basis--have a selection of stuff queued up when I go to bed, and then have it waiting for me on my iPod when I wake up to go to the gym. It worked for me over the weekend, when I bought an episode of Knight Rider from the music store while the iPod was connected--it was downloaded and added to the playlist, and then copied to the iPod with no intervention from me. Unless my memory is faulty or something.

    Welcome to the Discussions Steavis,
    As far as I know, a sync to the iPod only occurs upon the first attachment, as long as your settings are set for such action.
    The iPod will only sync after the initial attachment if you initiate the sync yourself. I believe it is in a pull-down menu, and/or CTRL-Click the iPod in the source list and select "Sync".
    I am not sure if that is all correct, but in my experience, if I have connected my iPod, it syncs, then I say load in a CD to iTunes, I must re-sync the iPod before they transfer.
    Not knowing what you are using for this automation to get the app that converts and adds, etc, can do, I might explore a script that runs at a specific time of day and initiates a sync to any iPod connected. That should be fairly easy to do.
    Beavis2084

  • Some of my smart playlist's won't show on my ipod?

    I use several smart playlist's to collect different types of news to listen to on the go.  Most playlists work great.  I made a new playlist recently and it won't show on my ipod classic.  Any ideas?

    Are these smart playlists configured to sync to your iPod?  Double check your sync settings for your iPod via iTunes.
    B-rock

  • HT1665 Why does my ihome no longer work properly since my iPod update

    My ihome no longer works properly since I updated my iPod to the most current software update. Is there a fix?

    Sometimes thisworks:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    However,sometimes an iOS update breaks compatibility and you have to wait for either an iOS update or and update to the iHome firmware. Go to iHome's support site

  • HT4946 my aps no longer work on 2nd ten iPod touch

    why do apps update and no longer work on older ipod touch?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    Mankim223 wrote:
    Can someone help me with my ipod 2nd gen it doesnt start up or show up on itunes -0- is is broken?

Maybe you are looking for

  • Developing A PDF iPad App

    I need to develop an app for the iPad that acts as a PDF Viewer. It needs to have a homescreen that allows the end user to select the PDF wanted and open it. Once the file has opened it needs to be able to scroll through all pages and the *** points

  • Invalid Plug ins

    I cannot open PDF files-- or Adobe Reader itself-- because I immediately  receive a message "Invalid plug-ins Adobe Reader will close", which it  does immediately.  I unistalled Reader and reinstalled it but still  there seems to be an invalid plug-i

  • Deploying static HTML files

    I would like to deploy an applet in Weblogic 92. Could you point me to the documentation to do achieve this. There is one html file which has the applet definition and the jars that it references...

  • Syncing 8330 with OS 10.4.11???

    So I am new to this whole crackberry thing... and so far I get why its called crackberry I wanted to sync my 8330 to my Mac and i am told it can be done... but for some reason Icannot figure it out. I have dowloaded pocketmac but when I try to sync i

  • I want to upgrade to Mountain Lion on my 2gb MacBook Air.  Will it operate ok?

    I have a MacBook Air purchased in May 2009 and have Lion on it.  It seems to have become a bit slow and clunky!  I now want to upgrade to Mountain Lion.  Will the 2GB memory cope with it or not.  Am I able to put additional memory on my Air?