SMB client URL works in 10.4.10, breaks in 10.5 -- password not accepted

Hi,
The SMB client URL (Finder Command-K) that was working under 10.4.10 breaks under 10.5:
smb://DOMAIN-name;userid@Fully-qualified-DN-for-WinServer/PrivateSharename$
The symptom is that the Mac does connect to the WinServer, as I do get the userid/password prompt, with the userid already prefilled as DOMAIN-name\userid. But when I add my Windows password and submit, I get a delay and then a message my userid or password is invalid.
I know my userid and password are valid as they work from my PC, as well as from my Mac as far as establishing a Mac to PC screensharing session using MS Remote Desktop Connection.
I know that it's not a network, DNS, or WINS name resolution problem as I do get as far as the initial connection to the PC -- i.e. the userid/password prompt. As well I've tried using the Windows Server's IP address directly in the URL.
I've read the threads here and tried these variants of the URL:
smb://DOMAIN-name;userid@IP-of-WinServer/PrivateSharename$
smb://DOMAIN-name;userid:win-password@IP-of-WinServer/PrivateSharename$
I've tried the Ruby script to escape any funny characters in my win-password; but there are none anyways, and the output from the Ruby script mentioned in another thread are the same as my inputted password.
I've also gone into /etc/smb.conf and added the line suggested in another thread:
client NTLMv2 auth = Yes
...and rebooted. But that line is for Windows clients trying to connect to a samba server running on the Mac. I'm doing the opposite: trying to run a Samba client connection to a PC server.
Bottom line:
OS X 10.4.10 : no problem connecting to Windows server
OS X 10.5 : cannot
suggestions welcome,
...b

OK, so this SMB client URL (in the Finder, press Command-K) that was working under 10.4.10 breaks under 10.5:
smb://domain;[email protected]/share
so I added my domain name and WINS servers into the WINS tab of the Networking Preference Pane, and I was then able to browse our windows network in the Finder, find the above Win2003 PC server name, and connect! Yay!
So I went back and tried variations on the SMB URL above. Until finally this variation worked:
smb://domain;userid@server/share
Hmm. So server.domain.company.com which does resolve to the PC server's IP, no longer works under OS X 10.5 -- even though the same SMB URL worked in OS X 10.4.
Worse, while smb://domain;userid@server/share now works on the company LAN, smb://domain;userid@server/share fails over the company (cisco) VPN.
I speculate it's because OS X 10.5 is using the PC servers NetBIOS name above and therefore relying on various PC WINS server ports, whose packets can flow unimpeded over my LAN. But when I'm VPN'ing, the company LAN I land on blocks these packets and ports.
So after much tinkering, I returned to the Terminal.app and started reading the man pages about Samba, the open source Windows networking software used by OS X:
man -k smb <-- to look up all the terminal commands for samba
one of the entries this returned was:
nsmb.conf(5) - configuration file for SMB requests
Hmm, that sounds promising.
man nsmb.conf
returned a sample configuration file. I edited the sample file to include our windows "domain" name, and to map our "server" name to it's fully-qualified DNS name: "server.domain.company.com", and put this updated file, as per the man pages, in ~/Library/Preferences/nsmb.conf, and volia:
smb://domain;userid@server/share
now works for me to connect from OS X 10.5 to the "server" over our LAN and over our VPN!
This was a lot of work and not a general solution. OS X 10.4 was definitely better, but this is the only PC server I need to connect to, so I'm very happy that I don't have to uninstall Leopard and re-install Tiger.
...b

Similar Messages

  • I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

    I have iOS7 on my iPhone4. I turned on the Voice Over option and now my phone is not working at all. At first it was freezing and not accepting any commands. Now all I have is a blank sceen. I can't get back into it. Any ideas what happened here?

    Hi Jeffny01,
    If your iPhone is not responding, you may find the following article helpful:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Regards,
    - Brenden

  • ID password not accepted anymore (once worked)

    Good morning,
    I am kind of desperate...and I hope somebody is familiar with this problem.
    I have adobe reader 11 XI, the latest version.
    I am taking a trainingcourse at Learningtrain. They provide lessonmaterial with certificates / id only.
    I created an ID and sent that to my teacher. fyi: I was strongly advised to switch off the automatic update option..as adobe deletes id's... and i did.
    The teacher had it all set up. And it worked! I could succesfully open the material with my password.
    now the issue:
    But it only worked once! Very strange. the ID is still there,but adobe does not accept my password any more
    so i cannot open the file anymore. My home work is due today... and it is a lot ;-)
    I have checked and double checked my password and is must be correct.
    My teacher advised me to delete this id, and to create a new one. but that does'nt work as reader still askes
    for my password when i want to delete the id.
    so i decided to deinstall reader and install again (who knows...) but it lookes like i cannot delete it.
    fyi: I also have adobe acrobat pro on my pc as i have the whole adobe css range. but I have exclusively used the reader.
    Hope you can help me.
    Kind regards Asha

    Well, if you can't uninstall Reader, you probably have something wrong. But, if you were advised against updating, uninstalling will surely be worse!
    I'm afraid I don't know what kind of password this is, there are so many possibilities. What does the prompt say? A screen shot would be good (BUT DON'T TRY TO EMAIL IT IN REPLY).

  • Network Password not accepted, works on other computers

    We have an Airport extreme (looks like a UFO). Everything worked fine last night, but this morning our MacBook Pro cannot join the network because the password times out - Have rebooted both computes and Airport, no success. Other computers in the house can still log on to the network with the same (old) password - Any help?

    Hello Barbara Raley. Welcome to the Apple Discussions!
    Try the following on your MacBook Pro:
    1. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Delete the network(s) you regularly use from the list
    2. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    3. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.
    If this doesn't solve the problem, I suggest disabling wireless encryption on the AirPort Extreme Base Station (AEBS), and then, reestablish it with a completely new password.

  • I have new macbook pro 2012, after reimage with mountain lion new version image its locked by firmware password(i have the password but the password not accepted) and its just freeze at apple icon and doesnt boot to OSx, how to make it working?

    macbook pro seem not working, not either go to startup screen just freeze on apple icon.
    and cannot also password for firmware are wrong when i type it in.
    how can i know the keyboard problem if the password are confirm right?

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • My 1 click gifts not working on farmville, how do i fix it? will not accept all when i click on it?

    '''bold text'''this is a feature on the gamers unite tool bar and is not working properly can you help or assist me in fixing this issue?

    See:
    *[/questions/840221]

  • Apple id not accepted by app store but its working fine on apple website.

    i have my apple which was working fine on my mac book pro. but now its not accepted by the app store its keeps on loading for hour but no result where as the same apple id is working fine on apple website.

    Click here and ask the iTunes Store staff for assistance.
    (111387)

  • HT1911 Great if it worked - BUT IT DOESN'T - have reset my password but your USELESS ITUNES STILL WILL NOT ACCEPT MY NEW PASSWORD

    HAD MY ACCOUNT BLOCKED BECAUSE YOUR SYSTEM WOULD NOT ACCEPT MY PASSWORD
    WENT TO RESET PASSWORD AND YOUR SYSTEM WOULD NOT ACCEPT MY BIRTHDAY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    TOLD IT TO SEND AN EMAIL ........................ 10 REQUESTS LATER, GOT ONE EMAIL
    RESET PASSWORD ...... ALL ACCEPTED ............ UNTIL I GO BACK INTO THE EVER USELESS AND FUTILE ITUNES
    NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO PASSWORD NOT ACCEPTED
    MUST BE RESET
    RINSE AND REPEAT .......... OH AND INBETWEEN ................... SYSTEM TIMES OUT ................. INCREDIBLE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
    SO NOW, SITTING OVERSEAS, NO ACCESS TO ITUNES AS ACCOUNT STILL BLOCKED YOU MORONS

    THESE ARE MAINLY USER-TO-USER FORUMS, YOU ARE NOT TALKING TO ITUNES SUPPORT HERE. AFTER RESETTING YOU PASSWORD HAVE YOU TRIED LOGGING OUT AND THEN BACK INTO YOUR ACCOUNT TO SEE IF IT THEN WORKS ?

  • Password not working on My Verizon Mobile app on iPad

    I downloaded the My Verizon Mobile app to my iPad. When I try to sign in, it says the password is incorrect. I am able to sign in to my account using the Safari browser on the iPad, so I know the password I am using is correct. Why is my password not accepted by the My Verizon Mobile app on my iPad?

    Hello Sarah_O,
    I traveled to a local Starbucks and used their WiFi as you suggested. I was still not able to log in on my iPad there either.
    However, I did have an idea. I scrolled down to the bottom of the Verizonwireless.com home page where it says "view full website." I then went through the same steps of entering my phone number, answering my secret question, and entering my password. It worked!
    So, trying to log in on the mobile website did not work, but logging in on the "full" website did work. Your tech support team might want to check this out, since others might have the same issue.

  • User sip folder have many .cache files with 4kb and the folder is becoming full and Lync Client stops working

    User sip folder have manu Mailitem&username&.cache files until folder is full and Lync client stops working.

    Hi,
    You can try to change the Lync Profile name. After you do it, Lync will create a new Profile. The Lync Profile path is following:
    %UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
    If the issue persists, please repair Office 2013 and then test again.
    Best Regards,
    Eason Huang  
    Eason Huang
    TechNet Community Support

  • How to get 64-bit install and 32-bit client to work on 1 pc

    I have installed a full 64-bit 11g R2 install on my Windows 7 D: drive, installed two DB's, worked great. Then I realized application I need to support requires 32-bit client (for drivers) so I installed the 11g client also.
    My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client.
    Sqlplus in 64-bit works fine (D:\oracle\app\dock\product\11.2.0\dbhome_1\BIN\sqlplus.exe) whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
    ORA-12560: TNS:protocol adapter error
    If I open cmd prompt and navigate to 32-bit sqlplus under client this WILL work to login (but then I noticed it was using the 64-bit ORACLE_HOME and PATH settings if I typed set). In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 to
    ORACLE_HOME = D:\oracle\client\app\dock\product\11.2.0\client_1
    PATH = D:\oracle\client\app\dock\product\11.2.0\client_1\bin;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\
    Guess what? This stopped both the 64-bit and 32-bit sqlplus from working, even after bouncing the computer. Now the listener (64-bit) OracleOraDb11g_home1TNSListener will also not start either.
    Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?
    Thanks in advance for any help!

    lo**** wrote:
    My problem is that my registry only shows one ORACLE_HOME--the 64-bit full install whereas Cognos reqs to point to 32-bit client. The env/reg variables probably do exist/show, only in the right place. In Win 64-bit, there's a separate branch of reg entries for 32-bit (look for WoW6432Node).
    >
    ... whereas the 32-bit client sqlplus (D:\oracle\client\app\dock\product\11.2.0\client_1\BIN\sqlplus.exe) does not work. The error is:
    ORA-12560: TNS:protocol adapter errorIt works as expected. Since there is no Oracle instance in the Client home (no surprise), you can't connect "locally" from the 32-bit sqlplus. I.e. you need to use "...@connectident" in the connect string.
    In order to fix Cognos, I changed my ORACLE_HOME and path to point to the 32-bit client (i.e. from D:\oracle\app\dock\product\11.2.0\dbhome_1 toOn Windows platform, ORACLE_HOME should not be set by user (it is already set by installer, in the Registry).
    To pick up proper settings, PATH need to be set or used.
    >
    Sooooo, I think I need to set the OH and PATH back to the 64-bit as that is what the Listener requires but any ideas how to get the 32-bit sqlplus to also work?!?Please remove OH from env system settings.
    Multiple homes on Windows is often a source of problems, since extra consideration and setup is needed more than just installing the software.
    If "Cognos" relies on system PATH, then one way to go might be:
    - put path to 32-bit Client bin folder first in PATH
    - set up a shortcut to command window with only 64-bit in PATH, for times when you need to administer the database via command line.

  • E-Recruiting - Recruiter URL works for one user and doesn't for another

    Hi
    I am new to e-Recruiting, so any help will be greatly appreciated.
    We are in the process of configuring the SAP e-recruiting module on  an existing HCM system.  It is only a demo system. 
    We started off with the IDES, with SAP sample data.
    We activated the BSPs via SICF.
    We generated the BSP URLs via program rcf_generate_urls.
    We picked two existing employees (PERNRS) in the system and linked test IDs (USERID1, USERID2) to them in infotype 105.  Both USERID1 and USERID2 have BASIS/Superuser authorizations.
    When USERID1 runs the recruiter startpage it displays the page correctly.  Pernr of USERID1 has a Candidate(NA Object) linked to it's CP object.
    When USERID2 runs the recruiter start page it gives an internal error.  This Id's pernr does not have a candidate object. 
    Should there be a NA object for every CP object?  Does any one have some business process guides that may help us understand the relationships between the objects?
    Please advise.
    Thank you
    Amina

    Hello Amina,
    not everyone should have a candidate (NA) object, every one MUST have a candidate object. No matter which role someone plays within the e-recruiting system (recruiter, manager, admin, internal candidate, external candidate, talent manager, ...) he needs a candidate to work with the system.
    Assuming you have an ERP2005 (= E-Recruiting 600) you can use report RCF_USER_CREATE to create users for test purposes. For the productive environment you have to set up HR -> E-recruiting integration and can run HRALXSYNC to create candidates for existing employees.
    I am not sure how much business process documentation there is in sap help. I have to admit I prefere learning from the system. Perhaps a very rough overview:
    e-rec brings the following objects:
    NA - Candidate
    NB - Requisition / Application Group
    NC - Posting
    ND - Application
    NE - Candidacy
    NF - Talent Group
    furthermore e-recruting uses some additional objects from the hr base and other components (P Employee, CP Central Person, US User, BP Business Partner, O OrgUnit, S Position, QK qualification group, Q qualification, VA/VB/VC Questionaire and its elements)
    NA - The candidate is the central representation of everyone in e-recruiting. A Candidate is always linked to a CP which is linked to a BP and a US. If the person is an employee the CP is linked to the P object, too. (Hint: for integrated systems the user for an employee is not linked in HRP1001 but retrieved from IT0105 directly, e-recruiting uses a standard function of HR here, the hr function modules for reading object releations virtualize this assingment as hrp1001 relation).
    NB - The NB object has currently 3 slightly different tasks. As requisition it is the internal view for an internal/external hiring request, it defines what you are looking for e.g. "ABAP programer, 40 hours/week, place of work London, ..". As application group it allows to accept applications for "areas" where you have currently no exact position to hire but regularely look for canditates. Application groups channalize unsolicited applications e.g. Interns, Engineers. Third usage is the requisition for succession planning - not really important.
    NC - Posting is supposed to be the outside view. It contains the texts for the requisition published in the different channels. as you might to use a different text for the different media a requisition can have several postings. A posting has one or more posting instances / publications. They are not an hr object type, they define the channel with publication duration and language where you publish your posting.
    ND - The application can be compared with the hardcover application. If a candidate applies he creates an application. The application is linked to the candidate of course and as the candidate applies through a certain channel the application is linked to the posting.
    NE - The candidacy is the assignment to a requisition. You could say it is the task / intention to check a candidate for the requisition so it is linked to the requisition and the candidate. As the candidate applies for the job described by the requisition (application group are treated the same here) an application is always linked to at least one candidacy. If a recruiter decides based on the candidates profile that he is interesting for another open positions he can add more candidacies to the application to check the candidate for these requisitions. There is also the posibilit that you create a candidacy w/o application. Every external who applied and every employee is in the system even if he has no active application. External candidates can even register to the system w/o applying. You can check this pool for suitable candidate an assign them to a requisition. This is a candidacy w/ an application. You can later request a candidate to apply to this requisition but it is theoretical possible to process the complete hiring just with a candidacy.
    NF The Talent group is used to structure the huge amount of candidates in the pool. E.g. you can form a talent group "High Potentials - Design Engineers". You can use these groups to easier find suitable known candidates if a matching requisition is opened. But they are also needed for pool development. For short applicant groups you can track them and try to stick with your company till you get the right opening for them.
    The other object are linked to this core. Qualifications are linked to requisitions as requirement and linked to candidates of course. OrgUnits and Positions can be linked to requisitions to link to OM. Questionaires are assigned to candidates at all for general appraisal or to candidacies to appraise the suitability for the requisition or to track interview, assessment results.
    There ore other "objects" in e-recruiting which are not represented by an OTYPE. One example is mentioned above the publication. Others are recruiting team and recruiting plan. If you need information to one of these just post another reply.
    Hope that gives some basic overview about the objects.
    Best Regards
    Roman Weise

  • How to get the FTP clients to work?

    This is something that (to me at least) should be trivial but I just can't
    get it to work at all.
    How do you get an FTP client to work?
    I've tried several GUI clients as well as the terminal FTP command and they
    all seem to get stuck entering passive mode - according to the log entries
    they send the command.... And then nothing or a timeout, the following is
    from the terminal FTP command:
    Titania:~ susan$ ftp ftp.apple.com
    Trying 17.254.16.11...
    Connected to ftp.apple.com.
    220 17.254.16.11 FTP server ready
    Name (ftp.apple.com:susan): anonymous
    331 Anonymous login ok, send your complete email address as your password.
    Password:
    230 Anonymous access granted, restrictions apply.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    ftp> ls
    501 EPSV: Operation not permitted
    227 Entering Passive Mode (17,254,16,11,223,157).
    200 PORT command successful
    421 Service not available, remote server timed out. Connection closed
    ftp>
    In my System Preferences -> Network panel in the Proxies tab, I have the
    "use Passive FTP mode (PASV) checked.
    I also have checked the FTP firewall option (but I think that is only if I'm
    acting as an FTP server).
    I am connected to the internet via a Netgear wireless router.
    I also have an old Windows laptop that also uses the same wireless router
    and it can FTP quite happily!!!!!
    Any suggestions would be gratefully received.
    Susan

    ejn - thanks for your continued assistance.
    I've tried turning the firewall off but this does not appear to make any difference(*). Also, I have Parallels installed and I'm sharing the internet connection with this (even though Parallels itself is not currently running). Turning this sharing off doesn't seem to change anything either.
    I have noticed some entries in the ifpw.log file that coincide with some of the ftp actions. Given the following terminal session:
    Titania:~ susan$ ftp ftp.apple.com
    Trying 17.254.16.10...
    Connected to ftp.apple.com.
    220 17.254.16.10 FTP server ready
    Name (ftp.apple.com:susan): anonymous
    331 Anonymous login ok, send your complete email address as your password.
    Password:
    230 Anonymous access granted, restrictions apply.
    Remote system type is UNIX.
    Using binary mode to transfer files.
    ftp> ls
    501 EPSV: Operation not permitted
    227 Entering Passive Mode (17,254,16,10,245,46).
    200 PORT command successful
    421 Service not available, remote server timed out. Connection closed
    ftp>
    at the time the "200 PORT command successful" is displayed, the ifpw log starts showing:
    Sep 5 09:11:21 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:24 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:27 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:30 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:33 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:36 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    Sep 5 09:11:42 Titania ipfw: 12190 Deny TCP 17.254.16.10:20 192.168.0.5:49162 in via en1
    which makes sense as the system tries to go for an active transfer.
    (*) Actually, while I've been writing this, I've been playing on the terminal as well. I've found the combination of:
    1) turning off the firewall
    2) starting ftp
    3) issuing the 'passive' command to turn off passive mode
    4) issuing 'ls' etc. works
    Looks like I've not been waiting long enough for the ftp client to get sick of trying the passive transfer and switching to an active one with the firewakk turned off!
    Still doesn't answer the question - why does passive mode not work?
    Susan

  • The SMB client failed to resume a handle on a file share with continuous availability

    Hi.
    We have a 2-node WS2012 cluster that has a file server role with couple shares configured.
    We're however constantly getting spammed by the following errors in the eventlog:
    1) event 1002, source: SmbServer, message: "RKF failure - SRV2 failed to get acknowledgement from Resume Key filter for persistent handle request."
    2) SCOM has an alert opened with this description: "SMB client failed to resume Continuously Available (CA) handle as Resume Key Filter is not acknowledging the handle." Per the alert knowledge, we've inspected ResumeKeyFilter eventlog, but it
    contains only informational message and warnings and none of those are from the time the alert was created.

    Hi,<o:p></o:p>
    Please try applying the following hotfixes.<o:p></o:p>
    Update that improves cloud service provider resiliency in Windows Server 2012<o:p></o:p>
    http://support.microsoft.com/kb/2870270
    <o:p></o:p>
    Physical Disk resource move during the backup of a Cluster Shared Volume (CSV) may cause resource outage<o:p></o:p>
    http://support.microsoft.com/kb/2869923
    <o:p></o:p>
    Can't access a resource that is hosted on a Windows 8 or Windows Server 2012-based failover cluster<o:p></o:p>
    http://support.microsoft.com/kb/2838043
    <o:p></o:p>
    Best regards,
    Vincent Wu
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • We have PI-7.0 but our client requires work on XI-3.0.

    we have PI-7.0 but our client requires work on XI-3.0. is it possible to transfer objects in PI-7 TO XI-3.0 and is it ok to work on PI-7.0 insted of XI-3.0 which is wanted by our client.

    Hi Chiru,
    I dont think there are should be any problems.... All you need to take care is you have same Service Pack installed on bothe the servers...
    A comparision of the service packs in 2004 and 2004s;
    in 2004XI 3.0 - in 2004s PI 7.0
    SP12 & < - SP04
    SP13 + 14 - SP05
    SP15 - SP06
    SP16 - SP07
    SP17 - SP08
    SP18 - SP09
    Regards,
    Jai Shankar.

Maybe you are looking for

  • Regarding execution of workflow

    Hi all, I have a workflow for rebate . In that workflow there is a mail sent task after an activity . The activity is getting completed according to SWIA transaction. But the flow gets stuck at mail sent task . Can anybody tell me what the problem mi

  • Macbook Extremely hot since 10.6.7 update

    Hi, I upgraded to 10.6.7 about 3 days ago and ever since then, my macbook has been running at about 195-200F (over 90 C). I have been regularly Activity Monitor and there is no out of control process (currently I am at 192F and the busiest one is Act

  • B1 Table Relationship

    Dear Expert,   Is there any reference document which i can know the B1 table relationship?? Regards, Kit

  • What are Best CAMCORDER option/choice for APPLE MAC

    Just looking around for a compatible CamCorder ie Apple O/S software provided with the Cam Corder. Looking at HDD Storage recorder, however not necessary to go to the higher level. Any advice would be greatly appreciated.

  • I am unable to dial numbers straight (it comes as alphabets)

    Lately, each time i try to dial a number on my blackberry torch, it displays the numbers am dialing only in alphabets in both the search box and dial box. Unless I prefix my dialled numbers with a plus (+) it is just impossible to dial a number outri