SMB connection to 1 specific source not working

Ok please read this, i realize there are 100's of posts regarding smb but i think this one is unique.
At some point my imac quit mounting drives from just 1 certain windows machine. I can "connect to server" via the ip address and the computer name, then the window pops asking which drive to "mount" i select the share i want, but then i get this error message:
+There was an error connecting to the server “xxxx”. Check the server name or IP address, and then try again.+
+If you are unable to resolve the problem contact your system administrator.+
I saw several posts hinting that the latest Snow Leopard update 10.6.3 might be the culprit, but why just this one connection?!!
I've tried removing the shares all together and re-adding them but still the same message.
I can however connect to any other computer with shares (windows) and it works just fine.
As a side note, i can connect to this pc via remote desktop just fine, but i get tired of resaving all my files into a drop box.
Please help if you can!!
Thanks
Caleb

G'day Caleb,
What version of Windows is the PC (with the problems) running?

Similar Messages

The wi-fi on my ipod touch is connected but the internett is not working! Help

Soo annoying, it's connected but the internett is not working. I don't know what to type in or what to do, so I need help.

Are you 100% positive you are connected? Head to Settings - Wi-Fi and tap the > next to the network you are connected to? What is listed for an IP address? If it's in the 169.x.x.x range, it means your iPod did not properly receive a valid IP address via DHCP from your modem/router. So the 169.x.x.x address is a self-assigned one.
This can usually be resolved by a reboot of your router. You can do this by unplugging it for about 30 seconds. After it powers back up, try reconnecting it. It wouldn't hurt to try a reset of your iPod as well. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
See here for more troubleshooting suggestions.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can I make sure an url to connect to a webinar will not work in another browser?

How can I make sure an url to connect to a webinar will not work in another browser? The url is using a session cookie instead of username/password to authenticate the user and has the following form: /r5ygd62w5za/?session=breezrek22zu756wgzy8r&launcher=false&refresh_parent=true

Try the [https://addons.mozilla.org/en-US/firefox/addon/2592/ NoSquint] add-on, it gives greater control over the zoom options.

How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

How can I get my iPhone to show up on the panel to the right iTunes? I keep connecting it but it does not work.

http://support.apple.com/kb/TS1538

Hi, i am not able to connect to the internet. wifi not working.

hi, i am not able to connect to the internet. wifi not working. not able to find proper drivers for 32 bit win.7 os. need urgent help..
This question was solved.
View Solution.

Hi:
I can give you the link to the wifi driver, if you do the following steps to post the hardware ID for the wireless card, so I can figure out what model wireless card the notebook has...
To find the hardware ID, go to the device manager and click on the device labeled Network Controller.
Then click on the Details tab at the top of the Network Controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the second item (Hardware ID's).
Post the top string of characters you see in the window.

Sessions.xml data source not working using toplink

I'm having some difficulty getting a data source to work. I have an ADF selectOneChoice component and I want the list of values available to be bound to a database given by the JNDI name and controlled at the j2ee container level.
I have created a sessions.xml file
<toplink-configuration>
<session>
<name>PIMSSession</name>
<project-xml>META-INF/PIMS_ADF_TLMap.xml</project-xml>
<session-type>
<server-session/>
</session-type>
<login>
<datasource>jdbc/PIMSDS</datasource>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
<connection-pool>
<is-read-connection-pool>true</is-read-connection-pool>
<name>default</name>
<login>
<datasource>jdbc/PIMSDS</datasource>
<platform-class>Oracle10g</platform-class>
<uses-external-connection-pool>true</uses-external-connection-pool>
</login>
</connection-pool>
</session>
</toplink-configuration>
The sessions.xml points to the toplink mapping file PIMS_ADF_TLMap.xml, which contains information about the database view that is used to populate the drop down list. It also contains a deployment connection:
<toplink:login xsi:type="toplink:database-login">
<toplink:platform-class>oracle.toplink.platform.database.oracle.Oracle10Platform</toplink:platform-class>
<toplink:user-name>pimsdev</toplink:user-name>
<toplink:password>BB742416276274A494F7008B3AE0FB10</toplink:password>
<toplink:driver-class>oracle.jdbc.OracleDriver</toplink:driver-class>
<toplink:connection-url>jdbc:oracle:thin:@yvworad01:1521:PIMSD</toplink:connection-url>
</toplink:login>
The problem I'm having is that my ADF application always binds the selectOneChoice to the connection-url in the toplink mapping file instead of the datasource in the sessions.xml.
If I remove the deployment connection from the mwp file, recompile and deploy I get a JBO-29000 error about not having a suitable driver.
Does anyone know how to get the selectOneChoice to bind to a datasource instead of the toplink mapping connection-url?

Hi Aaakar,
From the error message, please try to change the setting of Credential type for the data source on report manager as follows:
Go to the Data Sources properties page.
For the Connect Using option, select Credentials stored securely in the report server.
In User Name and Password, type credentials that can be used to access the database. If you are using SQL Server as the data source, the user name must be valid for both logging on to the server and for accessing the database that contains the data for
the report.
If the user name and password are credentials for a Windows account, select Use as Windows Credentials.
If you want the report server to pass the credentials of the user accessing the report to the server hosting the external data source, click Windows Integrated Security. In this case, the user is not prompted to type a user name or password.
For more details about Configure Data Source Properties, please see:
http://technet.microsoft.com/en-us/library/ms155882.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Oracle Drive specific features not working

I have set up Oracle Drive against two 10gR2 instances. Both of them fail with different messages.
There are no issues with MS Web Folders, also most of this functionality works in Oracle Drive.
When I try to use Drive specific functionality like "set properties", this fails with following messages.
1. One of them fails with HTTP-404 after using machine name in the URL as opposed to using Virtual Host name
2. Second one fails with similar error message but this is missing virtual host name or server name in the URL.
I can't find any Oracle Drive logs to debug. So, my questions are ..
1. how can I debug Oracle debug?
2. Does Oracle drive support virtual host?
3. If so, why is the above behaviour
Users are keen to use Oracle Drive. So, any help (ASAP) would be appreciated.
Regards,
Bala Avula
Kinetic Software Ltd

Hi Christian,
Sorry I didn't get back to you so far. I just noticed that this account is using old email address and I didn't recieve any update when you replied.
Here are some answers to your questions.
0) Bye the way one of the servers works now after recent portal repository copy (ptlconfig was run as part of it)
1) I tested view page, access control and set properties options. All of these fail.
2) I was looking for log files in the wrong place. Found them now and from the logs, it looks like one of the sites is not getting proper values for OPTIONS query.
Here is the reply from server that works.
==== Request ===================================================================
OPTIONS /dav_portal/portal/ HTTP/1.1
Content-Type: text/xml
Content-Length: 133
Accept: */*
Host: devinfo.united-glass.co.uk:7779
Connection: Keep-Alive
User-Agent: Windows Client 4.3 (build 12)
Authorization: Basic ****************
<?xml version="1.0" ?>
<D:options xmlns:D="DAV:">
<Orcl:menulist xmlns:Orcl="http://xmlns.oracle.com/portal/oradav"/>
</D:options>
==== Reply ============================= reply time 1943 ms ====================
HTTP/1.1 200 OK
Content-Type: text/xml; charset="utf-8"
Set-Cookie: portal=9.0.3+en-us+us+AMERICA+C50FA4B405C748BCA1DCBEA4AA945F2D+4F1321F3C7185B361FA993BDEF81AF9A5C7A3D52E417988AFBDAA4D2F94A1B0AE0F3E66338F66F278D85FED4B6E7F5DD8D2FF36DF7632769EA1309A302AE20163B4888CBB4D17A4A; domain=.united-glass.co.uk; path=/dav_portal/portal
Connection: Keep-Alive
Keep-Alive: timeout=5, max=999
Server: Oracle-Application-Server-10g OracleAS-Web-Cache-10g/10.1.2.0.0 (N;ecid=5824288353905,0)
Content-Length: 1953
Date: Thu, 18 Aug 2005 15:27:23 GMT
MS-Author-Via: DAV
Allow: OPTIONS, GET, HEAD, POST, DELETE, TRACE, PROPFIND, PROPPATCH, COPY, MOVE, LOCK, UNLOCK
DAV: 1,2
<orcl:OraclePortalMenu xmlns:orcl="http://www.oracle.com/oradav/xythos/"><orcl:Members><orcl:MenuItem orcl:DisplayName="Set Properties" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=property&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Change Access Control" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=access&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Preview Content" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=preview&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="View Versions" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=version&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /></orcl:Members><orcl:Collections><orcl:MenuItem orcl:DisplayName="Set Properties" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=property&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Change Access Control" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=access&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="View Page" xml:lang="en" orcl:url="http://devinfo.united-glass.co.uk:7779/pls/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=preview&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /></orcl:Collections></orcl:OraclePortalMenu>
Here is the reply from server that does NOT work.
==== Request ===================================================================
OPTIONS /dav_portal/portal/ HTTP/1.1
Content-Type: text/xml
Content-Length: 133
Accept: */*
Host: info.united-glass.co.uk:7777
Connection: Keep-Alive
User-Agent: Windows Client 4.3 (build 12)
Authorization: Basic ************************
<?xml version="1.0" ?>
<D:options xmlns:D="DAV:">
<Orcl:menulist xmlns:Orcl="http://xmlns.oracle.com/portal/oradav"/>
</D:options>
==== Reply ============================= reply time 1852 ms ====================
HTTP/1.1 200 OK
Content-Type: text/xml; charset="utf-8"
Set-Cookie: portal=9.0.3+en-us+us+AMERICA+0CAD20EE8A924CC5BB8F6CE84A107D0C+B1812814BE667200A940FD2AF2C795BA3EE4B9659FB2D82DD4058EFCBB335EBB255CC9F2C71111F0A4C51632C9DFBE2FF0D80D97F97B6CBC1167A6B9DAA661210DB1DB5B5A05D22F; domain=.united-glass.co.uk; path=/dav_portal/portal
Connection: Keep-Alive
Keep-Alive: timeout=5, max=999
Server: Oracle-Application-Server-10g OracleAS-Web-Cache-10g/10.1.2.0.0 (N;ecid=8092027261765,0)
Content-Length: 1694
Date: Thu, 18 Aug 2005 14:25:09 GMT
MS-Author-Via: DAV
Allow: OPTIONS, GET, HEAD, POST, DELETE, TRACE, PROPFIND, PROPPATCH, COPY, MOVE, LOCK, UNLOCK
DAV: 1,2
<orcl:OraclePortalMenu xmlns:orcl="http://www.oracle.com/oradav/xythos/"><orcl:Members><orcl:MenuItem orcl:DisplayName="Set Properties" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=property&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Change Access Control" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=access&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Preview Content" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=preview&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="View Versions" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=version&p_is_member=true&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /></orcl:Members><orcl:Collections><orcl:MenuItem orcl:DisplayName="Set Properties" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=property&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="Change Access Control" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=access&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /><orcl:MenuItem orcl:DisplayName="View Page" xml:lang="en" orcl:url="http:/portal/PORTAL.wwsbr_menu.process_menu?p_menu_name=preview&p_is_member=false&p_dav_prefix=/dav_portal/portal&p_path=##PATH##" /></orcl:Collections></orcl:OraclePortalMenu>
You can seee from the logs that URLs constructed for 2nd one is in complete. Any ideas on fixing this?
Regards,
Bala

Tx Data Sources NOT WORKING

Is anyone else out there going crazy trying to get Tx Data Sources to work? out of the six connection pools I have, I can only get two of them setup with Tx Data Sources. I am able to make connections to the pools using DriverManager. However, when trying use them via a Data Source, only two of them work. This is the error:
javax.naming.NameNotFoundException: Unable to resolve ACLINET1. Resolved: '' Unresolved:'ACLINET1' ; remaining name ''
where ACLINET1 is the name of the pool and Data Source.
ANy help would be great!

Hi Mark,
Could you check if a target is assigned to the datasources?
Looks like it's not. Could you also show us the questionable
code and the part of the config.xml defining pools and DataSources?
Regards,
Slava Imeshev
"Mark GIlligan" <[email protected]> wrote in message
news:3d1ce4c5$[email protected]..
Is anyone else out there going crazy trying to get Tx Data Sources towork? out of the six connection pools I have, I can only get two of them
setup with Tx Data Sources. I am able to make connections to the pools
using DriverManager. However, when trying use them via a Data Source, only
two of them work. This is the error:
>
javax.naming.NameNotFoundException: Unable to resolve ACLINET1. Resolved:'' Unresolved:'ACLINET1' ; remaining name ''
>
>
where ACLINET1 is the name of the pool and Data Source.
ANy help would be great!

After upgrade to Yosemite SMB connection to remote server no longer works. WHY?

HI,
Before I upgraded to Yosemite I had mapped a connection to a directory on a remote server using SMB. After upgrading from OS 10.9 these connections no longer work.
Any idea why? Nothing on either the remote network server or the SMB mapping has changed.

There appears to be a problem with Firefox 20 with UNC paths when using roaming profiles on a server.
This is currently investigated and tracked via this bug report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=857672 bug 857672] - Address Bar not working
<i>(please do not comment in bug reports: [https://bugzilla.mozilla.org/page.cgi?id=etiquette.html])</i>

WSUS not working completely, no MMC connect, all web services are not working

Hello all,
I have a problem not sure what causing it or what is the source of it as I am not into WSUS that much...
THe status is as follows:
I have 1 server 2008 sp2 RTM x64, I had WSUS 3.0 SP2 on it since a while, it was working fine until a week ago, when I started receiving the below messages in the event viewer
I have spent too much time trying to trace or troubleshoot this issue, but all I got was to check the registry and check permissions on the temp folder and other folders, I have done complete removal with the database for the old WSUS and reinstalled it
again but I got the same problem
Nothing strange and no problems happened on the server perior to this issue, it just happened...
Any help will be appreciated
Regards
============== MSG 1 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:52:54 PM
Event ID:      7053
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission please contact
your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">7053</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:52:54.000Z" />
    <EventRecordID>884368</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.InvalidOperationException -- Client found response content type of 'text/html; charset=utf-8', but expected 'text/xml'.
The request failed with the error message:
<html>
    <head>
        <title>Security Exception</title>
        <style>
         body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
         p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px}
         b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px}
         H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red }
         H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
         pre {font-family:"Lucida Console";font-size: .9em}
         .marker {font-weight: bold; color: black;text-decoration: none;}
         .version {color: gray;}
         .error {margin-bottom: 10px;}
         .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; }
        </style>
    </head>
    <body bgcolor="white">
            <span><H1>Server Error in '/ApiRemoting30' Application.<hr width=100% size=1 color=silver></H1>
            <h2> <i>Security Exception</i> </h2></span>
            <font face="Arial, Helvetica, Geneva, SunSans-Regular, sans-serif ">
            <b> Description: </b>The application attempted to perform an operation not allowed by the security policy. To grant this application the required permission
please contact your system administrator or change the application's trust level in the configuration file.
            <br><br>
            <b> Exception Details: </b>System.Security.SecurityException: That assembly does not allow partially trusted callers.<br><br>
            <b>Source Error:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code>
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.</code>
                  </td>
               </tr>
            </table>
            <br>
            <b>Stack Trace:</b> <br><br>
            <table width=100% bgcolor="#ffffcc">
               <tr>
                  <td>
                      <code><pre>
[SecurityException: That assembly does not allow partially trusted callers.]
   ASP.global_asax..ctor() +0
</pre></code>
                  </td>
               </tr>
            </table>
            <br>
            <hr width=100% size=1 color=silver>
            <b>Version Information:</b> Microsoft .NET Framework Version:2.0.50727.4214; ASP.NET Version:2.0.50727.4209
            </font>
    </body>
</html>

Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_AdminApiTools()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.get_ServerState()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.SetNavigationItemEnabledStates()
   at Microsoft.UpdateServices.UI.SnapIn.Wizards.OOBE.OOBEWizard.OOBEWizardInitialize()</Data>
</EventData>
</Event>
============== MSG 2 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      13051
Task Category: 6
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
No client computers have ever contacted the server.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">13051</EventID>
    <Level>3</Level>
    <Task>6</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884373</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>No client computers have ever contacted the server.</Data>
</EventData>
</Event>
============== MSG 3 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12002
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Reporting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12002</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884374</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Reporting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 4 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12012
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The API Remoting Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12012</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884375</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The API Remoting Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 5 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12032
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Server Synchronization Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12032</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884376</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Server Synchronization Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 6 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12022
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The Client Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12022</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884377</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The Client Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 7 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12042
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The SimpleAuth Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12042</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884378</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The SimpleAuth Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 8 ==============
Log Name:      Application
Source:        Windows Server Update Services
Date:          9/21/2011 1:53:01 PM
Event ID:      12052
Task Category: 9
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
The DSS Authentication Web Service is not working.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Windows Server Update Services" />
    <EventID Qualifiers="0">12052</EventID>
    <Level>2</Level>
    <Task>9</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:01.000Z" />
    <EventRecordID>884379</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOAMIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>The DSS Authentication Web Service is not working.</Data>
</EventData>
</Event>
============== MSG 9 ==============
Log Name:      Application
Source:        ASP.NET 2.0.50727.0
Date:          9/21/2011 1:53:09 PM
Event ID:      1314
Task Category: Web Event
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      APP-SVR.DOMAIN.local
Description:
Event code: 4010
Event message: An unhandled security exception has occurred.
Event time: 9/21/2011 1:53:09 PM
Event time (UTC): 9/21/2011 10:53:09 AM
Event ID: 11b96ca285fa46d2a05d38e2e9b168af
Event sequence: 1
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820
    Trust level: High
    Application Virtual Path: /ApiRemoting30
    Application Path: C:\Program Files\Update Services\WebServices\ApiRemoting30\
    Machine name: APP-SVR
Process information:
    Process ID: 8332
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Request information:
    Request URL:
http://app-svr:8530/ApiRemoting30/WebService.asmx
    Request path: /ApiRemoting30/WebService.asmx
    User host address: 192.168.5.22
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Custom event details:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="ASP.NET 2.0.50727.0" />
    <EventID Qualifiers="16384">1314</EventID>
    <Level>4</Level>
    <Task>3</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-09-21T10:53:09.000Z" />
    <EventRecordID>884380</EventRecordID>
    <Channel>Application</Channel>
    <Computer>APP-SVR.DOMAIN.local</Computer>
    <Security />
</System>
<EventData>
    <Data>4010</Data>
    <Data>An unhandled security exception has occurred.</Data>
    <Data>9/21/2011 1:53:09 PM</Data>
    <Data>9/21/2011 10:53:09 AM</Data>
    <Data>11b96ca285fa46d2a05d38e2e9b168af</Data>
    <Data>1</Data>
    <Data>1</Data>
    <Data>0</Data>
    <Data>/LM/W3SVC/715372307/ROOT/ApiRemoting30-7-129610759889193820</Data>
    <Data>High</Data>
    <Data>/ApiRemoting30</Data>
    <Data>C:\Program Files\Update Services\WebServices\ApiRemoting30\</Data>
    <Data>APP-SVR</Data>
    <Data>
    </Data>
    <Data>8332</Data>
    <Data>w3wp.exe</Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
    <Data>http://app-svr:8530/ApiRemoting30/WebService.asmx</Data>
    <Data>/ApiRemoting30/WebService.asmx</Data>
    <Data>192.168.5.22</Data>
    <Data>
    </Data>
    <Data>False</Data>
    <Data>
    </Data>
    <Data>NT AUTHORITY\NETWORK SERVICE</Data>
</EventData>
</Event>
Saleh Ramadan

So, in reality, this issue has nothing at all to do with "it was working; now it is not", because you've destroyed all of the evidence that would exist in a "was working; now is not" scenario. What we really have here is a NEW installation that has failed.
So, from the perspective of a NEW installation that is not working...
Are there any other roles, features, services, or applications installed on this server?
Did you install the Web Server Role exactly as described in the documentation?
Did you install the WSUS Role exactly as described in the documentation?
Were there any other roles, features, services, or applications installed onto this server
after your original (working) installation of WSUS?
Lawrence Garvin, M.S., MCITP:EA, MCDBA, MCSA
Principal/CTO, Onsite Technology Solutions, Houston, Texas
Microsoft MVP - Software Distribution (2005-2011)
My MVP Profile: http://mvp.support.microsoft.com/profile/Lawrence.Garvin
My Blog: http://onsitechsolutions.spaces.live.com
Oh, well, I have red and followed the documentation exactly step-by-step on the technet library, and I can guarantee you nothing went wrong because this is not my first installation for it
When I told you about the old damaged installation and the new installation which is also failed and showed me the same symptoms as the old one, I was sure that nothing wrong with the WSUS itself, but rather it is something wrong with the environment
Answering to your above questions, the answer for all is that: that server is only used for WSUS, nothing more
Anyway, I have managed to restore the service thanks to your previous reply where you point to the CONFIG folder inside the NET framework folder, I checked the files in there, some were changed to the date I think has stopped the service, so I repaired the
NET framework 2, and restarted
It is working fine now and syncing with the update server
Saleh Ramadan

IPad connected to TV using dim not working with iOS 7.0.2

Since updating my iPad to iOS 7.0.2, connecting my iPad 4 using hdmi to my tv is not working.
In fact, when connected, everything on my iPad is in slow motion. The iPad moves in slow motion. And there is no image being mirrored on the tv. This use to work fine before the update. Any ideas?

(A) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Reset all settings
Settings>General>Reset>Reset all settings
Note: Data will not be affected but settings will be reset.

Web Content Source - Not Working

Created a new web-content source & full crawled it.
When i searched with content text, not working.

Hi ,
According to your description, my understanding is that it did not work when you searched a new web site content source in SharePoint 2013.
Please check whether the web site allows anonymous access to its content. If not, we need to configure a rule for the URL which allows us to enter the credential to access the content of site
More information, please refer to the link:
http://mohitvash.wordpress.com/2012/03/07/configure-external-site-as-content-sources-in-sharepoint-search/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Account access to specific websites not working

On my daughter's computer (iBook, limited rights account) she can no longer access Facebook and a few others. (these sites work fine with admin account on this machine) Heard that fixing permissions and/or repairing the Keychain would work... Nothing working so far. Though Safari was the culprit, but behavior same in: Firefox, Camino, iCab, Chrome. (uninstalled addn'l browsers after testing)
What I've done to date:
Reset Safari and empty cache
http://forums.macrumors.com/showthread.php?t=280529
no change
Ran Keychain First Aid and verified date and time from Apple's server
http://support.apple.com/kb/TA20405
no change
matched proxy information
http://superuser.com/questions/67472/safari-cant-establish-a-secure-connection-t o-the-server
no change
repair permissions as admin, then DVD, then root
ACL found but not expected on 'private/var/root/Library/Preferences'
ACL found but not expected on 'private/var/root/Library'
ACL found but not expected on 'private/var/root'
several issues with 'permissions differ but will not be changed'
no change so far, but repair permissions from restricted account (with authorization) looks promising though I've been fooled before.
Don't want to have to nuke/rebuild the profile. I had a similar problem on my PowerBook several years ago, and APPLCARE walked me through a Terminal fix. (All my machines are out of warranty now)
Anyone else have ideas?

Fix permissions did NOT work, neither did booting as Single User with /sbin/fsck... Disk Utility with iBook in Target Mode reports "The volume iBook appears to be OK."

Push notifications for specific apps not working even though the badge updates (Facebook, Google etc.)

So this has been happening for months now. I was expecting iOS 5 to fix it, but it hasn't. Push notifications for specific apps do not work. Some come through just fine, but Facebook and Google+ in particular don't work correctly. Facebook push notifications seem to work when the notification is generated from an action performed on a mobile device (ie: someone writes on my wall from another iPhone); if they do the same thing on the desktop, the notification doesn't seem to come through.
As for Google+, I've never seen a single push notification come through as it should, even though I've seen other iPhones with the same app reciving these notifications with no issue.
This is particularly strange because the badge on the app icon usually updates (though it feels like fetch, not push), but the notifications simply don't make it into the notification center (or on the lock screen as they should). As I said, this has been happening for months, long before iOS 5, and the problem has persisted now that I'm running iOS 5.
I've checked and rechecked all notifiation settings for these apps. I've uninstalled and reinstalled them. I've called Apple support and they couldn't offer me any help. Does anyone have any idea what's going on here?
Thanks for your time.

I got an iPhone 4s and I'm experiencing the same problems. I used facebook messenger, and used to get the push notifications to that app, but now that i've deleted it I no longer get the messages directly to the facebook app.
I have push on in the mail settings and notification center for facebook are on as well. I also have push notifications on in the settings for facebook.
I've tried deleting the app and reinstalling, no fix. I haven't tried a hard reset yet.
So far, I figured out that it's not iOS or the facebook app, somehow it is a problem with my account. I logged into my wife's account on my iphone and her account is able to recieve push notifications to my iphone.
Any thoughts?

SMB connection to 1 specific source not working

Similar Messages

Maybe you are looking for