SMB file transfer issue on windows 8

Issue: When I transfer the file from UNIX OS to Windows
Server 2012 (SMB 2.0 or 3.0) system using SMB (Samba), the file gets transfer but contains of file dose not (Only empty file size of 0 KB gets created on windows Server 2012).
Additional Info:
File transfer from UNIX to Windows Server 2003 (SMB 1.0) works fine.
Command: Smbclient //backroom/e -Utest%abc -c "put /tmp/test.txt abc\abcdata\test.txt"
This produces the following error:
Error writing file: ERRSRV - ERRerror (non-specific error code.)
0.0kb/s transferred
There is not logging in Event log (System and application) in Server 2012 regarding this failure.

Similar Messages

More SMB Slow transfer issues 2012 R2

Hello All,
I have read the multiple threads about 2012 Rs and SMB file transfer issues, and I have tried everything I have found on TechBet with no luck. I have disabled RSS and all the checksum offload options, and I have changed the GPOs
for digital signing...no luck. Any advice would be great...
AB

Hi,
Above all please make sure it is caused by SMB. Sometimes network issue could also be caused by hardware configuration or limitation.
Incase is related to SMB version please test to disable SMB2 to see if SMB1 works fine or not.
Also here is a forum FAQ article which could help troubleshoot general SMB related issue. Please see the troubleshooting process:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7bd9978c-69b4-42bf-90cd-fc7541ccb663/forum-faq-troubleshooting-network-file-copy-slowness?forum=winserverPN
If you have any feedback on our support, please send to [email protected]

WRT350N File Transfer Issues...

I'm unable to transfer files from one PC to the other. I've upgraded the firmware to the latest revision (1.03.2). PC1 is my laptop from work. At work, I can connect to it w/o any problem and transfer files to/from any PC on the work network.
From home, If I attempt to connect to the laptop from the home computer, XP Pro comes back w/ "Cannot find...". This should be fairly simple, but I can't seem to get it working. I had the same problem w/ my other Linksys router before it died. I went w/ the WRT350n because of the 1GB transfer rate between computers.
If I attempt to ping the laptop from the desktop, I get the correct results. Going from the desktop from the laptop, no such luck. Both systems are in the same workgroup and running XP Pro.
If I attempt to RDC into either system, I'm prompted for a username & password. I receive the "This computer can't connect..." error. Single Port Forwarding w/ port 3389 is enabled.
I've just about given up... Anyone have any ideas?

I have this exact issue on my new WRT 610. I'm all connected between laptop (Vista Home Premium) and desktop (Vista Ult), but when I try to copy files from a shared dir on the desktop to my laptop, it works ok for a while and then STOPS dead in the water after 10-15 mins and says "file is no longer located at location xxxxx". Basically, my connection severs at that point, in midstream, because I can't even see the desktop anymore from the laptop until I reboot (I just reboot both machines). This thread seems to indicate that shutting down the firewalls on both machines is the solution and thus is ok to do, but I'm unsure of that solution and scared to implement it. I did a search and it seems that it is NOT recommended to shut down the Vista firewall even tho I have the hardware firewall now... because only the Vista firewall can monitor the outgoing connections and halt them... is this true? Appreciate feedback, in the meantime I will risk it for a half hour and shut them down and see if the transfer goes longer and/or quicker. My transfer speed between the two 'puters is disappointingly slow altho I can't quote an exact speed... 70 megs of files was gonna take 2 hrs and 30 mins per the windows popup.
P.S. Can someone please explain why the Vista firewall would be the issue here? Why would it allow the transfer for 15 mins and 4-5 MB but then slice the connection? Wouldn't it either allow the full file transfer or else not allow it at all? I don't understand.
Message Edited by asb3pe on 06-20-2009 07:16 PM

Lion server file sharing issue with windows API read/write ini file (GetPrivateProfileString)

Hello,
I try to config lion server as file server for a windows application we use at work. All other computers are windows 7 or XP, lion server is the only mac. I choose lion server because it's size, quality and personal love of apple products.
10.7.2 lion server's samba file sharing works almost perfectly with all my windows machines, I can copy, delete, modify any text files or office files without any issue, but the most important windows application for my business doesn't work with samba file sharing. After some digging, I found it is because windows program can't read or write INI file stored on lion share. Windows API GetPrivateProfileString always returns empty if the INI file is store on lion share.
You can download a small application for read/write windows INI file from codeproject.com to test this problem:
http://www.codeproject.com/KB/files/ini.aspx
I can open/edit the in file using any text editor without any problem. The only problem is with those windows APIs. ACL is turned on for my lion share and assigned "delete" rights to samba users.
I install samba3 on the same server; it works perfectly with windows API. My windows program also works. Looks like there is something wrong with lion server's sambax.
I'd prefer to use built-in samba even I have samba3 working. Built-in samba is very immature right now, but considered how young it is, I will give apple some time to make it mature.
Does anyone have same issue or knows how to fix it?
Thanks,
Michael.

All the memory is fine. The server rarely if ever goes down when there are only around 10-12 users connected. When there are 20+ users connected and working heavily it goes down often. When I say working heavily, I mean they are transferring huge files to the SAN (100GB+), sometimes 5 at a time per user, and there are a bunch of others who are reading large video files at a minimum of 220MB/sec from the SAN.
Though this worked on Snow Leopard without any issues, Lion just doesn't seem to be able to handle it. The odd thing is, on Snow Leopard there was only a single 1GB ethernet connection to a NAS system, whereas with Lion we have a much more powerful machine with a 6-port 10GB ethernet card and a 4 lane 8GB fiber card to a true SAN. You would think that the newer scenario with Lion would handle far more users with ease.
So far, very disappointing with regards to Lion's file serving performance.

WD Elements External drive file transfer issue.

I have just purchased a 1.5Tb USB 2.0 WD Elements external hard drive for backing up data. I have partitioned it, using Disk Utility in to a 1Tb Fat32 and 500Mb OS Journaled (Extended) pair of partitions. The OS Journaled (Extended) partition will replace a smaller Maxtor drive as my Time Machine Backup drive.
The problem: When I attempt to copy/move a file from either the Mac HD or my current backup drive, a 750Gb Maxtor, I get the message "*The operation can't be completed because an item with the name "file/folder name" already exists*." On the Windows XP Boot Camp partition file transfer is not a problem
WD have not been of much assistance and I am hoping someone can remedy this problem for me.

and btw, since I have the exact same My Book Essential USB 2.0 1.5 terabyte drive the poster has, I retrieved the Box it came in (Green) and It says plainly on the box. "Compatibility - Formatted NTFS for Windows XP, Windows Vista or Windows 7.
Requires reformatting for Mac OS X Tiger, or Leopard".
OP states he formatted a 1 terabyte partition FAT32. Do any of you actually understand the size restrictions of FAT32? I didn't think so.
I have no problem with this or any other drive since I format every drive I buy for the purpose that I had in mind.
The decision is size/interface/price. Any WD will do, since usb2 at 480 mbits/sec is faster than firewire 400 and out of my 4 macs only usb2 is common across them all, it's a no brainer. Yeah, firewire 800 is faster but only half my macs support it.
So it goes to sleep after 10 minutes of inactivity? TM only updates once per hour. In loose terms it sleeps 50 minutes of every hour when it's not needed. So What.
So in a day's time, that's 1,200 minutes that it doesn't spin...that sounds like a feature to me.
How many new, inexperienced users have you people talked into taking perfectly good drives back to the store? I see it post after post and quite frankly, you don't know what you're talking about.
Full disclosure. I don't work for, or have ever been paid anything from WD. I don't have stock in WD (although I've thought about it). I don't have any other ID's on this board so I don't "game it" like other users.

File transfer issues in Skype 6.22?

Recently updated to 6.22 and lost the ability to decline incoming files. In previous versions you had to options - accept or decline, now the only options seem to be "accept" or ignore and then the file request just sits in the chat window as incomplete. Is this a setting that can be changed or do I need to stay annoyed by it forever?
Moreover: After accepting a file transfer, you used to be able to click the "view in folder" link and open the file location. This also seem to be removed. Comments on this?

...also you can just start by opening the conversation with the first member of your future group you want to create and then simply use the "Add contacts" button on top right to add the other members. This way a new group conversation will be created as well.
We are right now working to update this FAQ to reflect that information: https://support.skype.com/en/faq/FA1005/how-do-i-start-a-group-instant-message-in-skype-for-windows-...
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

SCP log file transfer issues after upgrade

We upgraded out AsyncOS from 6.3.3 to 7.1.3 and now we are encountering log transfer issues with 2 out of 3 WSA's. Also the log rotation is set at 3GB but is rotating at 1GB. Anyone have any suggestions?

Hi Dominick,
FIrst look at your log subscriptions for the access logs. Log into the GUI -> System Administration -> Log Subscriptions -> Access Logs highlighted in blue on the left side of the window. Check that your configuration is set to your needs. Next we need to review what is taking place when SCP tries to send the logs to the destination by reviewing the System Logs also located within the log subscriptions. Is the destination a Windows or Linux device ? If it is a Linux device you may also want to look into var/log/secure for the log information there as well.
Sincerely,
Erik Kaiser
WSA CSE
WSA Cisco Forums Moderator

Ichat file transfer issues

Hi, is anyone else experiencing as issue with iChat where if you send over a file like an mp3 it says unexpected error in the file transfer box after the recipient accepts the file? The process was working yesterday and has done this all day. Please someone help.

Hi,
Welcome to the  Discussions
Some people are reporting that GoogleTalk files sending is a bit suspect with iChat
Some others are reporting issues with Snow Leopard to Leopard File Sharing although it works Leopard to Snow Leopard with the same computers. (AIM based Buddy lists)
9:55 PM Thursday; April 29, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

E7 file transfer problem in Windows 7

Hi,
I have trouble transferring files in Explorer in WIndows 7. When trying to copy a video file to the mass storage Video folder in the phone the copy fails every time. When using another machine with Windows XP it works ok. Is there a specific problem with the user rights in Win7? (running admin rights does not help)

Ok then I haven't tried file transfers on win7 machines yet will check if the same happens to me, thought you were trying to tranfer a bigger size file. Have you tried transferring using Ovi suite btw?.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Windows 7 file transfer issue

I transferred all music files to my new laptop (Windows 7). When I install iTunes (64 bit), only the music files in the iTunes Library folder are automatically connected to the song in iTunes. All other files can be connected manually, but that is a HUGE chore. It seems as though iTunes should search for all music files, like it did when I roiginally installed it on my old laptop. Any ideas?

I transferred all music files to my new laptop (Windows 7). When I install iTunes (64 bit), only the music files in the iTunes Library folder are automatically connected to the song in iTunes. All other files can be connected manually, but that is a HUGE chore. It seems as though iTunes should search for all music files, like it did when I roiginally installed it on my old laptop. Any ideas?

Very Strange AFP/SMB file service issue, slow, intermittent connections.

There's a bit of a saga to this, so please stay with me.
X-Serve G5, first loaded with 10.3.2, and over 2 years upgraded to 10.3.9. All the server has ever done is be a standalone file server to Mac only. There is no AD/OD intergration, or any fancy stuff about it, its just a dumb file server, serving Macs.
Recently we decided to put in a larger raid, and some new G5's, both PPC and Intel, and upgrade all the other G5's to 10.4. At the same time we thought we'd upgrade teh server OS to 10.4, so we had a full 10.4 site.
All updates went well, apart from the server. As soon as we started running 10.4 the server connections were really slow, and basically unworkable. I came on here and found little tweaks to do as other users were having similar problems, but with much more complex set-ups. The most puzzling thing was the apparent local caching issue.
If i copy a 50mg file/folder via either afp or smb, whatever happens the first time is longer, eg 1st 43s, 2nd 2sec, 3rd 2sec,, then re-boot, and its back to the same thing. If you disconnect, and secure empty trash you get the same thing.
Maybe more of an eye opener is a 110mb file/folder, 1st 75Sec, 2nd 38Sec, 3rd 32Sec.
Now i've given up and done a clean istall back to 10.3.9 on a seperate partition, and its instantly quicker in everything. eg. 50MB 1st AFP 5 Sec, 2nd AFP 5 Sec, 3rd SMB, 5 Sec, 110MB 1st AFP 9 Sec, 2nd AFP 9 Sec.
So i've fixed it, but by having to retrograde the OS back to 10.3.9. We don't use apple talk, only IP, we have no network issues, and spanning tree, etc, can't be the issue as it only affect appletalk!.
If i get a minute i'll do a clean install on 10.4, to see if the problem was the upgrade from 10.3 to 10.4..
Just wondered if anyone has had a similar experience, ot hoping that it may help someone in a similar situation. All i can think is maybe ACL's were the issue, or a newer/different version of AFP.
The new raid system showed the same throughput/connection speed on both OS', and the same network load, etc, is also on both OS', they were also not maxxed out, and the afp daemon wasn't eating CPU.

Retrograded back to 10.3.9, all works fine now!?!?!?!?

New to Mac - File sharing issue with windows PC?

Good day
I have a win7 pc with all my movies storred on. I shared the folder on the network, and can access the folder from my windows pc and my MacMini.
The problem is that my MacMini does not pic up all the files/folders on the shared folder. I would guess it only picks up about 80% of the files/folders. When I connect to the shared folder from the windows 7 pc it picks up everything.
More info:
Win7 Home (all updates done)
3tb drive (not sure what you call it, but it was formated with NTFS guid table)
Full read Write share enabled to everyone
MacMini Latest hardware and OSX.
Shared folder shows in shared part of finder.
Already did a restart of both PC and Mac
Already did a clean-up on mac.
The mac connects via wi-fi and win pc via ethernet
Please help me on what more I can try

I've seen this a long time ago, seems SMB on the Mac was limited to the number of listings, if you Share an inner folder, does OSX show more files in that folder?
No idea if this works in 10.8, but will mention it...
SMBUp
Did you lose your shared folders with the update of Mac OS X from Snow Leopard to Lion? You can’t see your shared folders from your DVR or Medicaneter boxes hooked up to your TV? The internet tells you to install gigabytes of developer tools and use tons of command-line instructions to regain the ability to see your mac from your other devices in the house after moving to Lion? We might be able to help.
http://eduo.info/apps/smbup

File Transfer Mac to Windows not working

QT file sent from my Mac not opening on Windows XP. Windows redirects to download 3rd party application page. ??
File is timeline in Final Cut Pro 5.1.4 on PowerPC. Exported as Quicktime movie. Saved as .mov file. 1.2gb. DVCPRO 50 HD 720p. Quicktime Pro 7.6.4. Vista Machine also has QT 7.6.4
Any ideas? Have you had this problem? I dont' get it. A QT file that won't open on in another QT? Or is it having an old FCP?
Never had an issue with QT files before, but I haven't transferred them around a lot either.

File is timeline in Final Cut Pro 5.1.4 on PowerPC.
Isn't Final Cut Pro a Mac program and not likely to be compatible on a windows computer? What is a PowerPC?

File transfer issues

I'm attempting to transfer files from my (very) old G4 (running OS 10.4) to my new mini via firewire. I have no problem starting the G4 in target disk mode, but it doesn't show up anywhere on the mini.
What am I missing here? I've read everything I can find but nothing has addressed this problem. I've skimmed the topics here and also didn't see anything, so my apologies if this has already been answered.
Thx~
Deb

After talking with Apple Support, only to be told to do exactly everything I'd already done a 100+ times, I'm no closer to resolving this issue than I was before. I suppose I could have purchased a bad firewire cable, though it seems kind of unlikely. Or perhaps the firewire ports on the G4 are bad, though they've never even been used.
I have no other ideas, though. Does anyone have a thought? Please? Am I stuck transferring years' worth of files via ethernet?
D.

SMB file name issue

I'm not sure if this is a "new" issue after upgrading to Server 10.5.6 or if it's been around and we've just noticed it. The issue is simple: if someone logs in via AFP and creates a file or renames it to something with a slash e.g. filename/08.txt, users logging in via SMB will NOT see that file at all. This applies to folders as well. At first I thought it was a permissions problem, but it's not.
If you log in via SMB and name a file with a slash, the AFP user will see a filename sans slash, e.g. filename/08.txt via smb becomes filename08.txt. BUT, if the AFP user tries to rename that file, the slash turns into a strange symbol.
Is this a bug? A feature? Do I need to tell my AFP users to stop using slashes in the filename? You'd think the server would make the filename translation more gracefully.

Hi Kiran
Then there is no need to use Transformation bean for this
In Mapping map the mail package Content_type field with
text/plain;name="xyz.csv"
and select mail package and keep attachments in receiver mail adapter
This will work
Thanks
Gaurav

SMB file transfer issue on windows 8

Similar Messages

Maybe you are looking for