SMB shares in solaris 11.1

hi , i am a newbie to solaris 11.1 and i need to allow windows users in a Workgroup Mode to access SMB shares without username or password and have full permissions , how can i do it ???
thanks in advance

Oracle recommends below things on rpool: (thats reason wanted to apply SMI Label)
I have seen in the Oracle documentation that for rpool below are recommended:
- A disk that is intended for a ZFS root pool must be created with an SMI label, not an EFI label.
- Create root pools with slices by using the s* identifier.
- ZFS applies an EFI label when you create a storage pool with whole disks.
- In general, you should create a disk slice with the bulk of disk space in slice 0.

Similar Messages

Search an smb share while logged into AD with OD managed prefs

_*Hi,*_
We have a set up here where i have enabled the indexing on smb share via mdutil, but when i search the share the only things i can see are things i have created, but if i log in as a standard local user, mount the smb share and enable indexing i can search the share perfectly well.
The permissions to the various folders on the smb share (sbs 2003) all appear to be the same.
Any ideas much appreciated

I ended up (for other reasons) reinstalling Solaris 11 among other things, and at some point this strange problem went away. I don't know exactly why or what was causing it in the first place, unfortunately. At least it's gone.
Cheers,
Kevin

Smb share not displaying all files in finder

When accessing a non-windows (IBM iseries) smb share, I will only see 30 objects. Windows PCs will see all of the available objects.
Is there a solution for this problem?

Hi,
Me too, I am encountering the same problem, not with Windows XP but with a virtual Windows NT machine.
I am connecting to an SMB share on a Unix server running under Sun Solaris (vers. 8) on which the Windows NT machine is emulated by running PC Netlink (version 2.0 Rev=rr24).
Viewing share folders by clicking them via Finder, I see only a maximum of 30 entries (folders and/or files) in each sub folder, though many of them contain dozens or hundreds of objects.
When I view those folders via the command line in the Terminal, I see even less: only 14 objects appear. For each sorting mode the same 14 objects are visible.
When I copy a file from my local harddisk into such a folder, it disappears immediately after copying. When I copy the same file a second time into the same folder, a message pops up rejecting the copying because another file with that name already exists. Together with that message the "hidden" first copy now appears in the finder window, only to disappear again when the warning message is clicked away.
I do see all objects when I mount the shares on a PC or on my old PB G3, running Classic MacOS 9.2.2. And I did see all objects before I migrated from MacOS X 10.3.9 to MacOS X 10.4.10.
The names of the "hidden" objects are all OK (neither beginning nor ending with a dot, etc.).
I am curious if somebody found a solution for the prob, or what workaround you are using.
Thank you
Fred

Creating a folder on an SMB share using a Mac

Hi everyone,
This is more of a question than a problem I'm trying to solve, really. Though the answer might help me better explain the issue to our security team.
Our environment has multiple Windows file servers, both 2003 and 2008. If one of these SMB shares is accessed from a Mac and the user creates a folder, will the ACLs on the share that are set to cascade actually cascade to this newly created folder? We've had issues in the past where ACLs that are supposedly set to cascade on a shared folder are not present on sub-folders created from Macs.
Next question: if the share resides on a netapp device, do the same rules apply? The Macs are still connecting to these shared folders using the SMB protocol.
All Macs are bound to our 2008 AD domain and use network accounts with local homefolders. The issue seems to happen when one or both of the following things happen:
1. A Mac user copies/creates a folder on a Netapp share and for some reason it doesn’t inherit rights correctly
2. We move the folder from one share on an actual Windows server to the Netapp and it doesn’t take permissions correctly.
Please let me know if you need any other information.

Let's put it this way: I'm asking on a Mac site because the people on non-windows support sites are WAAAAY more interested in talking about problems and solutions involving things other than Windows.
I'm fairly certain that the windows servers ARE respecting their own inheritance rules, barring any major bugs and the like which someone may know about...
The isue isn't with Macs moving shares to a netapp, it's with a share being moved to a NetApp that has folders created by a Mac. Talking with our security team further, it seems the problem may be limited to shares resident on a NetApp or moved from a Windows server to a NetApp.
I was primarily asking to see if anyone knew of any issues with these particular situations or had experienced something similar and had dug into it any deeper with F5 (NetApp vendor).

Unable to mount SMB shares under Mac OS 10.6.5

Help -
*I can no longer mount any shares from my Seagate BlackArmor NAS-110*. I bought the device (a 1TB network drive with CIFS (aka SMB), NFS, and FTP capabilities (no AFP connectivity)) in June of 2010, and it was working fine until appx (18 Nov, 2010). My computer - MacPro 2x2.26GHz Quad-Core Intel Xeon (early 2009) with 12GB of 1066MHz DDR3 RAM and Mac OS 10.6.5. My home network is running on Apple's TimeCapsule router (version 7.4.2).
Note: Problems began after installation of recent updates:
11/10/2010 - Mac OS 10.6.5
11/12/2010 - iTunes 10.1
11/13/2010 - iLife '11
11/13/2010 - iPhoto 9.1
11/18/2010 - Safari 5.0.3
I'm not sure which, if any, of these updates may have intrudced new code which impacted my ability to mount SMB/CIFS shares, or whether this problem is isolated to the NAS-110 (actually, reading numerous posts about connectivity issues (during/over the last month or so) shows similar issues with other external drives, servers, NAS devices). The issues may not have materialized until I rebooted the NAS or the Mac. FYI: The only firewall I'm using is the Mac's built in firewall, and I've got File Sharing (AFP, SMB) set to Allow Incoming.
What happens? I can't mount the SMB shares. I can see the device in my finder. It shows up as "BA-22B9C2", and I can see the sharepoint folders (in Finder): Download, Public, and wiki. When I attempt to SMB mount the shares (by any of the following methods: Double-Click in Finder, use 'Go->Connect to Server' or using the 'BlackArmor Discovery' application) The share/folder icon does not appear on my desktop. It creates a mount-point in the /Volumes directory, but no folder appears on the desktop. I can 'cd' into the sharepoint, and I can see that Spotlight has attempted to index the sharepoint (a .Spotlight-V100 directory was created), but I cannot see the 'Our Music, Our Pictures, or Our Videos' folders inside the Public share/directory. Successive attempts to mount a share, using Finder results in additional mount points in the /Volumes directory (Public-1, Public-2, Public-3, etc), but no folder icons on my desktop.
FYI: The 'Connected servers' setting (under 'Shared') is enabled in my Finder's Prefences (along with Bonjour and Back to My Mac), so connected shares should appear on the desktop.
Attempts to mount shares using the Connect to Server method (smb://10.0.1.2/Public, smb://admin:[email protected]/Public) also fail. No folder appears on desktop. The password/login authenticates (connecting to server), and a mount point is created in the /Volumes directory, but no folder appears on the desktop.
Attempts to mount shares using the BlackArmor Discovery application generate similar results. Shares are visible in the tool. I click on the 'Public' share (which has permissions set to 'read, write, execute' for all), then click the 'Mount Share' button. I am presented with an authentication/login dialog. I log in as a Registered user (name: admin password: admin) Once again, a mount point is created in the /Volumes directory, but no folder appears on the desktop.
Notably, whenever I attempt to mount a share, Spotlight indexes the share, but then it dies on my computer. Spotlight stops indexing my primary drive (where the OS is installed for my Mac). I have to stop the mds process using Activity Monitor. mds restarts automatically, and it starts indexing my primary drive again. While this may not be critical to my troubleshooting efforts, it has caused some considerable consternation on my part.
I initially (back around the 18th of Nov, 2010) attempted troubleshooting with the assistance of Seagate technicians, but they quickly gave up on the email support, insisted I had to continue over the phone, which costs ~$14.00 per 'incident' and isn't convenient for my schedule.
I've already attempted to update the firmware on the NAS (from 1000.0361 to 1000.1081), but that won't work. The NAS indicates a firmware update (1000.1081) is available, but it reports: "Firmware is not found". I had a friend try this update using his Windows machine (and my NAS), with the same results. He tried with a a Vista box and a Windows-NT running through emulation. I also tried to manually update. I downloaded the firmware image file "sg1000-1000.1081.img" from the Seagate downloads page, and attempted a manual update on the NAS. That failed with error "Failed to upload new firmware image to system." Once again, my friend tried to perform a manual update to the NAS. He downloaded a new copy of the file (from the Seagate downloads page), and he got the same error.
The Seagate techs recommended that I update the firmware. I explained my problems updating the firmware, and I have asked the Seagate techs (via email) for a known good copy of the firmware update, but they do not answer my requests for such.
The Seagate techs recommended that I restore the NAS with a factory reset. That caused plenty of problems, as their is no mac software to recover the factory reset 'key' from the device (need device MAC, and I presume some sort of hashing key stored on the device). So, I had to cart the drive over to my friends house, and have him attempt the restore. After some initial confusion regarding the MAC address, we were able to successfully restore the device to it's factory settings.
Note: Before attempting the factory reset, my friend attempted to mount the SMB shares (on the NAS), using his Mac running 10.6.5. He encountered the same problems I encountered. When he tried using his Windows-NT (through VMFusionWare emulation) *he WAS able to mount the shares*. O.k. This must be a Mac OS issue, and not a Seagate NAS issue. - Now that the drive has been restored to factory defaults, it's pretty much empty (some folders, but no data). Default admin/admin username/password are in place.
I'm not sure which, if any of my most recent software updates may have introduced changes to smb/samba, so I tried mounting the device using other services. It's capable of FTP and NFS as well as CIFS/SMB.
I tried to create an NFS mount. I tried using two different methods (an application called NFS Manager and the 'Connect to Server' method built into the Mac. Both methods failed to establish a nfs mount to the server. No login errors were noted, but no mount points were created in /Volumes, and no folders appeared on the desktop.
I tried to connect via FTP, that didn't work either (using an my Transmit client). I'm certainly striking out with this drive. My Mac will not mount the shares/folders. I tried FTP (to 10.0.1.2 as admin) using Transmit application (on port 21). Transmit reported "Could not retrieve file listing for “/Public”. Server said: OOPS: Child died Error -162: Port failed". Connectivity protocols of CIFS, NFS and FTP (on port 21) are enabled on the NAS and the /Public share.
*When I attempt to connect using the Connect to Server method (See Apple's 'Go' menu in the Finder), I met with sucess!* ftp://10.0.1.2/Public connect attempt resulted in two pop ups. One of them said 'connecting', the other said something about "'NetAuthAgent' (I didn't write it down) wants permission to access your confidential keychain data" Presumably, this was the authentication request. I said 'Always allow'. A folder appeared on my desktop and a finder window opened showing the contents of that folder. Unfortunately, the share is 'read only'; even when I attempt to authenticate as a specific user.
Note: I don't think FTP attempts to index the mounted shares.
Prior to the factory reset, I was able to connect to the shares using the Seagate's 'Global Access' web based ftp service. Now I cannot connect through the Global Access page.
Below are 'Console' entries and a listing of my /Volumes directory. These may help resolve the issue. I deleted some entries (those I felt were unrelated to the issue). I left in stuff that's been bothering me.
_*Can anyone help me reestablish SMB connectivity with my NAS-110?*_
- Robert Vaessen
'Console: All messages'
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor4dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 mDNSResponder[23] Bad service type in .blackarmor2dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:15 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 mDNSResponder[23] Bad service type in .blackarmorNASinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Got netServiceBrowserWillSearch: event.
12/16/10 00:11:16 BlackArmor Discovery[65267] got netServiceBrowser:didFindService:moreComing: event for <NSNetService 0x517a80> local. blackarmor1dinfo.udp. BA-22B9C2
12/16/10 00:11:16 BlackArmor Discovery[65267] inserted new net service object for BA-22B9C2:
"BA-22B9C2" = 1;
12/16/10 00:11:16 mDNSResponder[23] Bad service type in BA-22B9C2.blackarmor1dinfo.udp.local. Application protocol name must be underscore plus 1-15 characters. See <http://www.dns-sd.org/ServiceTypes.html>
12/16/10 00:11:16 BlackArmor Discovery[65267] Added 1 drive table objects to the servicesToInsertArray.
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Domain=[BA-22B9C2] OS=[Unix] Server=[Samba 3.0.34]
12/16/10 00:11:17 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] tree connect failed: NTSTATUS_ACCESSDENIED
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.307 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.216 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.216 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.286 ms
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:11:31 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:11:34 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Download', from '//%20;[email protected]/Download', dead
12/16/10 00:11:34 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 00:23:50 sandboxd[65414] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.356 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.209 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.237 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.209 ms
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:31:25 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:31:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
12/16/10 00:31:39 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.271 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.257 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.197 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.205 ms
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 00:47:36 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 00:48:41 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//%20;%[email protected]/Public', dead
12/16/10 00:48:41 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:51:17 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
12/16/10 00:51:18 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 00:53:51 sandboxd[65922] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 00:54:24 cupsd[65930] sandbox cache error: database is locked
12/16/10 01:00:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:01:06 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:02:02 _lp[66035] audit warning: expired /var/audit/20101215210444.20101215231614
12/16/10 01:02:02 _lp[66034] audit warning: closefile /var/audit/20101216055051.20101216080202
12/16/10 01:09:56 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public', from '//[email protected]/Public', dead
12/16/10 01:09:56 mds[22627] (Error) DiskStore: Unable to create/find index location
12/16/10 01:10:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
12/16/10 01:11:15 com.apple.Finder[208] NFS Portmap: RPC: Program not registered
12/16/10 01:11:15 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:09 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:13 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:12:29 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
12/16/10 01:12:44 com.apple.Finder[208] mount_nfs: can't access /: Permission denied
12/16/10 01:15:05 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[66174 ] No valid tickets, timing out
12/16/10 01:15:53 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:54 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:15:56 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:17:05 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:19:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-1', from '//[email protected]/Public', dead
12/16/10 01:22:38 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-2', from '//[email protected]/Public', dead
12/16/10 01:23:21 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:25 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:26 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:27 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 01:23:50 sandboxd[66426] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 01:24:03 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:47:13 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-3', from '//[email protected]/Public', dead
12/16/10 01:47:13 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-3
12/16/10 01:50:38 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:51:45 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:51:56 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 01:52:03 authexec[67020] executing /usr/sbin/automount
12/16/10 01:52:39 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:52:47 com.apple.launchd.peruser.505[150] (com.apple.AddressBook.abd) The following job tried to hijack the service "com.apple.AddressBook.abd" from this job: [0x0-0x1284283].com.apple.AddressBook.abd
12/16/10 01:53:10 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 01:53:50 sandboxd[67042] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
12/16/10 02:00:50 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 02:00:55 com.apple.Finder[208] mount_nfs: can't access /Public: Permission denied
12/16/10 02:01:01 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-4', from '//[email protected]/Public', dead
12/16/10 02:11:28 GrowlHelperApp[328] Transmit registered
12/16/10 02:12:07 Firewall[101] Transmit is listening from 10.0.1.3:59918 proto=6
12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59929 proto=6
12/16/10 02:12:17 Firewall[101] Transmit is listening from 10.0.1.3:59930 proto=6
12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59937 proto=6
12/16/10 02:12:25 Firewall[101] Transmit is listening from 10.0.1.3:59938 proto=6
12/16/10 02:12:33 servernotifyd[402] token expired
12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59947 proto=6
12/16/10 02:12:35 Firewall[101] Transmit is listening from 10.0.1.3:59948 proto=6
12/16/10 02:12:45 Firewall[101] Transmit is listening from 10.0.1.3:59961 proto=6
12/16/10 02:12:48 servernotifyd[402] Fetching new token
12/16/10 02:12:48 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-5', from '//[email protected]/Public', dead
12/16/10 02:12:49 servernotifyd[402] Completed token request
12/16/10 02:12:49 servernotifyd[402] Subscription request completed
12/16/10 02:15:20 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-6', from '//[email protected]/Public', dead
12/16/10 02:15:20 mds[22627] (Normal) DiskStore: Creating index for /Volumes/Public-6
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] PING 10.0.1.2 (10.0.1.2)
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=0
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=0 ttl=64 time=0.347 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=1
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=1 ttl=64 time=0.264 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=2
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=2 ttl=64 time=0.232 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] *Pinging host 10.0.1.2: icmp_seq=3
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] Response from 10.0.1.2: icmp_seq=3 ttl=64 time=0.236 ms
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] --- 10.0.1.2 ping statistics ---
12/16/10 02:19:28 [0x0-0x1266265].com.seagate.blackarmordiscovery[65267] 4 packets transmitted, 4 packets received, 0% packet loss
12/16/10 02:20:39 KernelEventAgent[64] tid 00000000 type 'smbfs', mounted on '/Volumes/Public-7', from '//%20;%[email protected]/Public', dead
12/16/10 03:07:28 Firewall[101] Transmit is listening from 10.0.1.3:60607 proto=6
12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60611 proto=6
12/16/10 03:07:37 Firewall[101] Transmit is listening from 10.0.1.3:60612 proto=6
12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60614 proto=6
12/16/10 03:07:46 Firewall[101] Transmit is listening from 10.0.1.3:60615 proto=6
12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60619 proto=6
12/16/10 03:07:55 Firewall[101] Transmit is listening from 10.0.1.3:60620 proto=6
12/16/10 03:08:04 Firewall[101] Transmit is listening from 10.0.1.3:60622 proto=6
12/16/10 03:11:26 Firewall[101] Transmit is listening from 10.0.1.3:60649 proto=6
12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60651 proto=6
12/16/10 03:11:35 Firewall[101] Transmit is listening from 10.0.1.3:60652 proto=6
12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60654 proto=6
12/16/10 03:11:45 Firewall[101] Transmit is listening from 10.0.1.3:60655 proto=6
12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60661 proto=6
12/16/10 03:11:53 Firewall[101] Transmit is listening from 10.0.1.3:60662 proto=6
12/16/10 03:12:02 Firewall[101] Transmit is listening from 10.0.1.3:60667 proto=6
12/16/10 03:12:02 sysadmin[69677] audit warning: expired /var/audit/20101215231614.20101216012742
12/16/10 03:12:02 sysadmin[69675] audit warning: closefile /var/audit/20101216080202.20101216101202
12/16/10 03:18:40 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 10 seconds
12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60739 proto=6
12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:43968 to port 60739 proto=6
12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
12/16/10 03:18:48 com.apple.launchd.peruser.505[150] (com.apple.pbs) Throttling respawn: Will start in 2 seconds
12/16/10 03:18:48 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60741 proto=6
12/16/10 03:18:48 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:34565 to port 60741 proto=6
12/16/10 03:19:05 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60745 proto=6
12/16/10 03:19:05 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:36662 to port 60745 proto=6
12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60785 proto=6
12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:49839 to port 60785 proto=6
12/16/10 03:21:59 Firewall[101] ftpfs_agent is listening from 10.0.1.3:60787 proto=6
12/16/10 03:21:59 Firewall[101] Allow ftpfs_agent connecting from 10.0.1.2:47180 to port 60787 proto=6
12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-metadata /Library/Preferences/com.apple.security.plist
12/16/10 03:23:51 sandboxd[70960] awacsd(48) deny file-read-data /Library/Preferences/com.apple.security.plist
'Cosole: samba log.nmbd' (Same entry repeated numerous times)
[2010/12/16 04:22:10, 1, pid=118] /SourceCache/samba/samba-235.5/samba/source/nmbd/nmbdincomingdgrams.c:process_resetbrowser(735)
processresetbrowser: received diagnostic browser reset request from BA-22B9C2<00> IP 10.0.1.2 state=0x2
'Console: samba log.sndb' (note the dates)
[2010/11/11 18:33:43, 0] /SourceCache/samba/samba-235.4/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/11 18:33:43, 0, pid=90063] /SourceCache/samba/samba-235.4/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/24 04:11:15, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/24 04:11:15, 0, pid=1507] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/24 10:47:01, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/24 10:47:02, 0, pid=1339] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/11/29 10:48:44, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/11/29 10:48:44, 0, pid=43299] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/12/08 12:29:58, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/12/08 12:29:58, 0, pid=7246] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
[2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:04, 0, pid=7248] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/08 12:30:06, 0, pid=7252] /SourceCache/samba/samba-235.5/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1576)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2010/12/09 09:59:02, 0] /SourceCache/samba/samba-235.5/samba/source/smbd/server.c:main(925)
smbd version 3.0.28a-apple started.
Copyright Andrew Tridgell and the Samba Team 1992-2008
[2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/lib/opendirectory.c:opendirectoryfill_domain_sidcache(1985)
opendirectorysamsearchname[/Config/CIFSServer] gave -14136 [eDSRecordNotFound]
[2010/12/09 09:59:03, 0, pid=19816] /SourceCache/samba/samba-235.5/samba/source/passdb/secrets.c:secretsfetch_domainsid(150)
secretsfetch_domain_sid:opendirectory_query_domainsid gave -14136 [eDSRecordNotFound]
'Listing of the /Volumes directory'
drwxrwxrwt@ 20 root admin 680 Dec 16 03:29 .
drwxrwxr-x 44 root admin 1564 Nov 27 12:19 ..
drwxrwxr-x 44 root admin 1564 Nov 27 12:19 Clone
lrwxr-xr-x 1 root admin 1 Dec 8 04:35 Macintosh HD -> /
drwx------ 1 rvaessen rvaessen 16384 Jan 1 1980 NO NAME
dr-xr-xr-x 2 root rvaessen 1 Dec 16 01:15 Public
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:19 Public-1
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-10
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:22 Public-2
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 01:47 Public-3
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:01 Public-4
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:12 Public-5
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:15 Public-6
drwxr-xr-x+ 3 rvaessen admin 102 Dec 16 02:20 Public-7
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-8
dr-xr-xr-x 1 rvaessen rvaessen 512 Dec 16 03:30 Public-9
drwxr-xr-x@ 17 rvaessen rvaessen 646 Nov 11 18:12 Robert Vaessen’s iPod
drwxrwxr-x 15 sysadmin staff 578 Nov 6 2009 Time Machine Prime
drwxrwxrwx 1 rvaessen rvaessen 4096 Dec 7 17:31 nuvi
drwx------ 1 rvaessen rvaessen 2048 Aug 16 14:52 rvaessen

O.k. Thanks for the clarification. I poked around in my TimeCapsule router's settings (TimeCapsule is an Apple Airport Extreme router with attached hard drive for wireless backup/storage). Unfortunately, it doesn't look like I can disable multicasting with the TimeCapsule. I can change the multicasting 'rate'. Settings are Low, Medium, High. It's currently set to Low.
I did a few web searches, and found an Apple.com article: <http://support.apple.com/kb/HT3789?viewlocale=en_US> which explained how to disable Bonjour Service Advertisements. I believe this is the same thing as 'Multicasting'. The process is a modification of "/System/Library/LaunchDaemons/com.apple.mDNSResponder.plist", and a restart of the Mac is required afterwards.
I'm a bit concerned that disabling multicasting will interfere with my AppleTVs and iTunes music sharing, but I may try it next time I'm up for a computer workout. This task will require editing of system preference files, could require multiple restarts, might interfere with my AppleTVs, could interfere with my iTunes file sharing, doesn't have a documented relationship to my problem.
This is way to difficult for something that should just work. Did you say you had read something about a relationship between this bonjour multicasting and smb connectivity? If it was online could you post the link?
I'm currently able to connect to the drive using NFS, but I have to manually configure that connection each time I reboot (can't get the 'Disk Utility' configured to do it automatically). While it's working with NFS, it's not my preferred connect method (for various reasons).

Copy file from SMB share to Desktop permissions

I have connected to a SMB share point (Windows Server)and copy a file to my desktop (Mac OS X 10.6.4).
The file on my desktop shows I have the read and write access, however, everyone has no access.
I could not get the system administrator to change on the server side. Is it possible to make any changes from my machine to make at lease every has read only access?
Thanks in advance.

I downloaded D2KWUtil from the link suggested by you. It has very nice example demo form. But the documentation provided says following
Using D2KWUTIL in Web Deployed Applications
The use of this library is not supported with Web deployed applications.
In a web deployment scenario not all functions within D2KWUTIL will work. Any function that interacts with the User Interface (such as those in the WIN_API_DIALOG package) will fail.
Any interaction with the O/S by other functions will all be executed on the NT server and will act within, or return information pertinant to, the environment on that machine. For instance GET_COMPUTER_NAME will return the Server’s name, not the name of the computer that the Client browser is running on. Likewise COPY_FILE will copy files in the Forms Server not on the Client.
Functions such as those in WIN_API_BITOP will continue to work without change.
so this will not work in web deployed application.
Any other suggestion?
Thanks

Share one iTunes library on a SMB share between PC & Mac

Hi,
Is there anyway I can share one iTunes library and the music files on a SMB share between a PC and a Mac? I assume there would be a problem with how the Mac and PC assign network drives differently would be an issue, or is there a way around this?
At the moment I'm only sharing the music files on the SMB share but with separately iTunes library on the PC and Mac.

I have itunes match. its good but its not perfect. it downloads wrong versions of songs. for example it downloads the censored version of many of my songs. plus it doesnt do podcasts, movies, tvshows, books.
plus it doesnt show my smart playlists in the same track order as on my computer. its good but it has bugs and shortcomings.
thanks for the suggestion but i'd like to try the way i initially posted about.

How to use smb share for home directory with AD account

I have extended the schema of our AD and bound a macbook pro running 10.6.8 to the domain. AD users are able to logon, and if I select the option to use their AD homedirectory attribute then this smb share is used as a network drive. My question is though, I need users to logon to MAC using a different smb share for their home drive than the path set in the home directory attribute. Does anyone know how I can achieve this?
Cheers
Paul.

But this method cannot use Regular Expression because my searching target is more than one line.Yes it can!
Like you said, first you list all the files in the folder.
For each file, use a BufferedReader to read the first lines, then you may use a StringBuffer to append the lines into it (don't forget to append the '\n' to each line).
Finally, compile your pattern ( "^November.*\nDecember" ) with the DOTALL flag,
verify that the string (from StringBuffer) matches the pattern and there you have it!

Problems saving to an SMB share using 10.8

Issue happens in CS5 after Mountain Lion Upgrade 10.8
when using CS5 to save files via a SMB connection to a Windows Server the following error is displayed "could not save filename due to a program error"
however file save functionality in other programs / finder succeeds as expected with no issue.

Branched this out to a new discussion. Which Adobe application are you trying to save to the SMB share from?

Can I Create A Symbolic Link to folders stored on an SMB Share folder?

Hello,
I am very new to Unix and was hoping that someone could point me in the right direction with regards to Symbolic links and an SMB share folder ....
Have purchased an ext. LAN Drive enclosure (http://www.macpower.com.tw/products/hdd3/pleiades/pd_usblan) which connects to my wireless router via ethernet like my G5 (main Mac) - our iBook connects via Airport. I have copied all my general documents/files to the SMB share folder on the ext. drive so that I can access them from the G5 and also the iBook.
However I'd also like to be able to store my actual Mail folder (/Users/Mark/Library/Mail/), , Safari folder (/Users/Mark/Library/Safari) + my Address Book and other folders sitting in the Application Support folder on my SMB share so all important docs/folders are in the one place. I've tried storing these folders on the SMB share and putting an Alias to these back in Users/Mark/Library/Mail etc but of course an Alias doesn't work.
Question 1: Can I create a symbolic link to these files if these are stored on an SMB share folder? If so, could you please tell me exactly what I'd need to type into Terminal? My SMB Share path is smb://STORAGE-XXXX/MARK
I have copied my iPhoto library and iTunes library to the SMB share and are working fine.
Question 2: Is it possible/worth attempting to move my whole home folder to the SMB share folder? Ideally, I'd like to be able to access my Mail from the iBook as well. If I could log into either the G5 or the iBook and access my latest Mail, Address Book and other Application Settings, that would be perfect. Would this be possible?
Thanks
Mark.
Dual 1.8GHz G5 (Rev.B), 2Gig RAM, 9600XT Mac OS X (10.4)

Dear Mark,
Yes you can. The command to create a link will look something like this:
$ ln -s thisFolder /Users/mark/thatFolder
I did this while I was hosting a microsoft based game. This put all of the players into a common directory.
SMB just resolved the link and everything worked fine.
However, as I understand it, some other applications do NOT work very well with links. As I have NOT tried it with other applications, I fear I can be of NO help to you in this matter.
The only way to find out which applications work with links is to try them and see what happens.
Best of luck,
Kurt

Using an "if not exists" command with a folder on an SMB share

I'm trying to use an "if not exists" command on a folder which is stored on a mounted smb share..
This part of my script is supposed to check if a folder exists and;
If it does - Skip to the next part of the script
If it doesn't - Create the folder.
At the moment it either errors saying that the folder doesn't exist or doesn't create the folder.
I can get this script to work fine using local folder paths but I want to do it on an SMB share..
Here's my script.
Many thanks in advance.
Martin
set username to (do shell script "whoami")
set Media to " Media Files"
mount volume "smb://172.22.8.23/macmedia$"
tell application "Finder"
if not (exists ("smb://172.22.8.23/macmedia$/" & username as text) & Media as text) then
make new folder at "macmedia$" with properties {name:(username as text) & Media as text}
end if
end tell
tell application "Finder"
set mnt to ("smb://172.22.8.23/macmedia$/" & username as text) & Media as text
try
mount volume mnt
end try
eject "macmedia$"
end tell

Hi Camelot,
Thanks a lot for that the script's working as it should now..
I'm still having intermittent problems on some clients where it will only map the root volume "macmedia$" and freeze there.. This is a problem as they can then see and access everyone elses folders from there.
Do you know of a better/cleaner way to do what I'm trying to acheive? All i'm after is mapping an additional drive for student's so they can save larger files to our media server within their own folders.
Is there a way of checking if a folder exisits within an smb share without mounting the volume? Just trying to think outside of the box a bit..
Here's my new script;
set username to (do shell script "whoami") & " Media" as text
mount volume "smb://172.22.8.23/macmedia$"
tell application "Finder"
          if not (exists folder username of disk "macmedia$") then
make new folder at disk "macmedia$" with properties {name:username as text}
          end if
end tell
tell application "Finder"
          set mnt to ("smb://172.22.8.23/macmedia$/" & username as text)
          try
mount volume mnt
          end try
          eject "macmedia$"
end tell
Many thanks,
Martin

Using single SMB share with multiple Hyper-V clusters

Hello,
I'm trying to find out if I can use a single SMB share with multiple Hyper-V Clusters. Looking at:
How to Assign SMB 3.0 File Shares to Hyper-V Hosts and Clusters in VMM
I think it's possible. Since the File Server is going to handle the file locking it shouldn't be a problem.
Has anyone tried that?
Thank you in advance!

Hello,
I'm not sure that's possible, I get this from this statement:"Assign the share—Assign
the share to a virtual machine host or cluster."
Even if it worked I wouldn't do that. Why don't you just create multiple shares?

Since upgrading to Mac OS 10.6.8 I can't connect to a smb share on Windows Server 2003r2

Hi recently i upgraded from Mac OS 10.5.8 to Mac OS 10.6.8 on a 2.66 GHz Dual-Core Intel Xeon Mac Pro 1,1.
Prior to upgrading to 10.6.8 i had a viable connection to a Windows Server 2003r2 which hosts Pre-press client and all out work files as well as client applications. Now I can not connect to the server. I can ping the server. I can connect to another SMB share on different Windows Server 2003r2 that is our secondary server, but i can not connect to the primary. The Client software is associated with data base tracking the data.
This share does not show up in my volumes but I have a Max Host File with the share defined.
Can anyone come up with a solution to this. I have contacted my support for the Server 2003r2 Client software but they don't have a solution beyond clean installing the computer.

Hi recently i upgraded from Mac OS 10.5.8 to Mac OS 10.6.8 on a 2.66 GHz Dual-Core Intel Xeon Mac Pro 1,1.
Prior to upgrading to 10.6.8 i had a viable connection to a Windows Server 2003r2 which hosts Pre-press client and all out work files as well as client applications. Now I can not connect to the server. I can ping the server. I can connect to another SMB share on different Windows Server 2003r2 that is our secondary server, but i can not connect to the primary. The Client software is associated with data base tracking the data.
This share does not show up in my volumes but I have a Max Host File with the share defined.
Can anyone come up with a solution to this. I have contacted my support for the Server 2003r2 Client software but they don't have a solution beyond clean installing the computer.

Unable to use SMB Share on Mac

I have a SMB Share defined on the Mac which I like to access from Linux/AmigaOS using smbfs.
Mounting works but when trying to list any files on share it gives error messages:
solid:~# grep imac /etc/fstab
//imac/home /imac/home smbfs username=wepl,password=xxx,iocharset=iso8859-1,user,noauto 0 0
solid:~# mount /imac/home
solid:~# df /imac/home/
Filesystem 1K-blocks Used Available Use% Mounted on
//imac/home 312229888 33529856 278700032 11% /imac/home
solid:~# ls /imac/home/
smbgetlength: recv error = 5
smbtrans2request: result=-5, setting invalid
smb_retry: successful, new pid=711, generation=36
smbproc_readdirlong: error=-5, retrying
smbgetlength: recv error = 5
smbtrans2request: result=-5, setting invalid
smb_retry: successful, new pid=711, generation=37
smbproc_readdirlong: error=-5, retrying
smbgetlength: recv error = 5
smbtrans2request: result=-5, setting invalid
smb_retry: successful, new pid=711, generation=38
reason is probably smbd crashes on the mac (/var/log/samba/log.smbd):
2008/06/24 18:31:16, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(679)
dsDoDirNodeAuthOnRecordType gave -14091 [eDSAuthMethodNotSupported]
[2008/06/24 18:31:16, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(383)
opendirectoryuser_auth_and_sessionkey gave -14091 [eDSAuthMethodNotSupported]
[2008/06/24 18:31:16, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2008/06/24 18:31:16, 1, pid=663] /SourceCache/samba/samba-187.4/samba/source/smbd/service.c:makeconnectionsnum(1087)
192.168.1.8 (192.168.1.8) connect to service home initially as user wepl (uid=501, gid=20) (pid 663)
[2008/06/24 18:31:32, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/lib/util.c:smb_panic(1650)
PANIC (pid 663): push_ascii - dest_len == -1
[2008/06/24 18:31:32, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/lib/util.c:logstacktrace(1761)
BACKTRACE: 11 stack frames:
#0 0 smbd 0x001bfc3a logstacktrace + 40
#1 1 smbd 0x001bfd6c smb_panic + 123
#2 2 smbd 0x001acadb push_ascii + 64
#3 3 smbd 0x0005ab13 set_ea + 17677
#4 4 smbd 0x0005bf4c set_ea + 22854
#5 5 smbd 0x0005de1a handle_trans2 + 3062
#6 6 smbd 0x00062fef reply_trans2 + 2516
#7 7 smbd 0x0007d14b get_OutBuffer + 1433
#8 8 smbd 0x0007df27 smbd_process + 2644
#9 9 smbd 0x00270007 main + 5076
#10 10 smbd 0x00002002 start + 54
[2008/06/24 18:31:32, 0, pid=663] /SourceCache/samba/samba-187.4/samba/source/lib/fault.c:dump_core(181)
dumping core in /private/var/log/samba/cores/smbd
[2008/06/24 18:31:33, 0, pid=665] /SourceCache/samba/samba-187.4/samba/source/lib/opendirectory.c:opendirectoryuser_auth_and_sessionkey(679)
dsDoDirNodeAuthOnRecordType gave -14091 [eDSAuthMethodNotSupported]
[2008/06/24 18:31:33, 0, pid=665] /SourceCache/samba/samba-187.4/samba/source/auth/authodsam.c:opendirectory_smb_pwd_checkntlmv1(383)
opendirectoryuser_auth_and_sessionkey gave -14091 [eDSAuthMethodNotSupported]
[2008/06/24 18:31:33, 0, pid=665] /SourceCache/samba/samba-187.4/samba/source/passdb/pdbodsam.c:odssamgetsampwnam(1571)
opendirectorysamsearchname gave -14136 [eDSRecordNotFound]: no dsRecTypeStandard:Users record for account 'admin'
[2008/06/24 18:31:33, 1, pid=665] /SourceCache/samba/samba-187.4/samba/source/smbd/service.c:makeconnectionsnum(1087)
192.168.1.8 (192.168.1.8) connect to service home initially as user wepl (uid=501, gid=20) (pid 665)
[2008/06/24 18:31:33, 0, pid=665] /SourceCache/samba/samba-187.4/samba/source/lib/util.c:smb_panic(1650)
PANIC (pid 665): push_ascii - dest_len == -1
[2008/06/24 18:31:33, 0, pid=665] /SourceCache/samba/samba-187.4/samba/source/lib/util.c:logstacktrace(1761)
BACKTRACE: 11 stack frames:
#0 0 smbd 0x001bfc3a logstacktrace + 40
#1 1 smbd 0x001bfd6c smb_panic + 123
#2 2 smbd 0x001acadb push_ascii + 64
#3 3 smbd 0x0005ab13 set_ea + 17677
#4 4 smbd 0x0005bf4c set_ea + 22854
#5 5 smbd 0x0005de1a handle_trans2 + 3062
#6 6 smbd 0x00062fef reply_trans2 + 2516
#7 7 smbd 0x0007d14b get_OutBuffer + 1433
#8 8 smbd 0x0007df27 smbd_process + 2644
#9 9 smbd 0x00270007 main + 5076
#10 10 smbd 0x00002002 start + 54
is there maybe a workaround possible by changing the config of smbd on the mac?
something to enable clear passwords which are used by smbfs?
seems smbd is buggy since some security patches:
http://bugs.gentoo.org/show_bug.cgi?id=199450
https://bugzilla.samba.org/show_bug.cgi?id=5087
http://www.psx-scene.com/forums/official-sms-forums/58197-sms-with-mac-os-10-5-l eopard-post423475.html

as a workaround I have disabled the supplied smbd and installed samba3 (3.0.29) from http://samba3.darwinports.com/
now it works, so this is a bug in 10.5.3, hopefully fixed in the next update…

Windows 7 machine can't see smb share or any macs

We have 7 render boxes set up on our network, all link to our smb share on our mac server accept one! We run SMBUp on the mac server due to well documented issues with smb and it works fine with 6 of the 7 machines...
I have gone through all settings and checked they match the settings on the other machines. As far as I can tell it matches.
What's strange is the pc used to connect fine, but when we moved offices it just decided to stop seeing any macs on the network!!! It can see the other pc's on the network just not any mac or smb shares.
Somebody please help before I smash this pc into a thousand pieces!!!!
10.9.1 is installed on the mac server.
Cheers
Martin

My guess is that Win7 "recognized" the device as a Realtek and substituted the Realtek drivers for it. Did your Zonet come with an installation CD ... or provides a web support site? If either, I would strongly suggest, that you use their drivers instead ... and this is a good reason you're only getting access with the 802.11g mode.

SMB shares in solaris 11.1

Similar Messages

Maybe you are looking for