Smoothing factors for Vendor Evaluation for Services

Hi Team,
How to apply smoothing factors for Quality and Timeliness of services in External Services. Any help is appreciated.
Thanks
ANita.

Hi ,
I will try to explain with one example
Actually in vendor evaluation , we are going to get only one percentage say for a material A for example Qty reliability - smoothing factor is 0.20
Material A is ordered by so many purchase orders and many goods receipts are done in many times. Goods receipt is done 6 times till now and the score is 80% . Now GR is done for 7th time . If the qty reliability is 100 % for this GR
the score is calculated in the following way
80%0.8+100%0.2 --- this the score after the 7th goods receipt....
Hope now u understand .... If u still have queries please post your feedback...
If u are satisfied , please reward points
Regrads
Mani

Similar Messages

  • Config Smoothing factor in vendor evaluation

    Dear MM experts,
    Please let me know where I can config smoothing factor of score in vendor evaluation!
    Thanks!

    Hi,
    what do you mean by smoothing factor. Normally the primary criteria used for vendor evaluation is
    1. Price
    2. Quality
    3. Delivery norms
    4. Service
    based on 4 above points the evaluation is reveiwed.

  • Smoothing factor in Vendor evaluation

    Hi,
    I'm not able to understand the math underneath the "smoothing factor" used in vendor evaluation. Could someone throw some light in this?
    thanks!

    Hi
    A score for a new goods receipt or the scores for a new service will change the existing scores for the current month.
    The new individual score does not have the same significance as the previous composite score, because the latter was calculated from a number of individual scores. For this reason, the new individual score is given a lower weighting (that is to say, it is smoothed).
    In carrying out this process, the system applies the relevant smoothing factors that you have defined for each individual score in Customising.
    OMGL is the transaction to configure smoothing factor.
    hope it helps.
    regards
    Srinivas

  • Entering the scores in service entry sheet for vendor evaluation

    Hi
    I could not able to enter the scores for vendor evaluation in service entry sheet. How to do it.
    With regards
    G Narendra kumar

    Hi
    While defining the Sub Criteria for Service, you have select the Scoring Method as C (Determination from quality rating of service) or D (Determination from timeliness rating of service).Then u can find a tab for Vendor evaluation in Service Entry sheet where you can enter the scores for service.
    Regards
    Ramakrishna

  • Vendor Evaluation for Service

    Hi,
    Can you anybody explain me how Vendor Evaluation will happen in case of Service and how to activate Vendor Evaluation tab in service entry sheet(ML81N).
    Regards
    Suresh Kumar Maroli
    Consultant-MM

    Check
    Re: Vendor evaluation - General Service and support

  • Additional functionality for vendor evaluation in ECC 6.0

    Hi folks,
    Can any one help me in getting the information below.
    Is there any additional functionality for vendor evaluation in ECC 6.0  when compared to ECC 4.7
    Pls let me know the functionality and the difference.
    Thanks
    Vasanth.

    Hi
    Is there any additional functionality for vendor evaluation in ECC 6.0 when compared to ECC 4.7
    The Solution Browser lets you enter start and target releases for functional areas, and provides you with the information about the new functionalities.
    You find the tool from our homepage at http://service.sap.com/erp (see the tool box on the right hand side).
    regards
    Andreas Rudolph

  • Additional sub criteria for Vendor Evaluation tab in SES (ML81N).

    Hi,
    I like to add two additional sub criteria for Vendor Evaluation tab in SES (ML81N). Based on which vendor evaluation will be calculated.
    1. Safety/Envt Upkeep
    2. Morale
    These two are added in SPRO->Purchasing->Vendor Evaluation ->Define Criteria. But not displayed in ML81N->Vendor Evaluation tab.
    Existing criteria. 1) Quality of Service and  2) Service Timeliness are already available.
    Thanks in advance.
    Chetan Shah

    Hello Chetan,
    have you checked note 79166 "MM-SRV Hint: Vendor evaluation for service"?
    Define an evaluation criterion for services in Customizing of the vendor evaluation to be able to use the vendor evaluation also for the services management.The main criterion must contain the determination methods 'C' (determination from the quality valuation of the service) and 'D' (determination from the timeliness rating of the service) in the sub-criteria.
    Kind Regards
    TomT

  • Role for Vendor Evaluation

    Hi experts
    i'd like to know what are the standard role for vendor evaluation and vendor qualify in SRM EBP 7.0.
    Regards
    Andrea

    The vendor evaluation questionnaire is always triggred when a the user posts a confirmation RIGHT?
    /SAPSRM/RECIPIENT -SAP SRM Server Role
    com.sap.pct.srm.ro_goodsrecipient-Portal Role
    Supplier Evaluation
    You can use Supplier Evaluation in SAP Supplier Relationship Management (SAP SRM) to evaluate your suppliers by means of Web-based surveys. You can tailor individual surveys and questionnaires, and select the criteria to evaluate. You can then transfer the data that you gather from the questionnaires and surveys to SAP NetWeaver Business Intelligence (SAP BI). You can use this information to help you select suppliers and negotiate conditions.
    For more information on reporting in SAP BI, see the SAP NetWeaver documentation on SAP Help Portal at  http://help.sap.com  SAP NetWeaver  SAP NetWeaver <release> Library  SAP Library  SAP NetWeaver Library  BI Content  Supplier Relationship Management  Supplier Evaluation .
    Prerequisites
    You need to compile questionnaires using the WebSurvey Cockpit. For more information, see the SAP NetWeaver documentation on SAP Help Portal at http://help.sap.com  SAP NetWeaver  SAP NetWeaver <release> Library  SAP Library  SAP NetWeaver Library  SAP NetWeaver by Key Capability  Application Platform by Key Capability  Business Services  Web Survey .
    When you use the Supplier Survey Cockpit (see below), you can access the WebSurvey Cockpit from the SAP NetWeaver Portal. To compile a questionnaire, in this case, click on the Supplier Evaluation tab strip. Then click on Create Questionnaire.
    Features
    There are two different methods to collect data to evaluate supplier performance:
    Event-driven evaluation. For example, when saving an invoice, a questionnaire is presented to the user
    Ad-hoc evaluation through surveys managed with the Supplier Survey Cockpit
    Event-Driven Evaluation
    SAP Supplier Relationship Management (SAP SRM) supports event-driven questionnaires for two specific occasions:
    Saving of a confirmation
    Saving of an invoice
    Note
    The event-driven evaluation and the ad-hoc evaluation use separate InfoProviders in SAP NetWeaver BI. The InfoProvider that is used for event-driven evaluation is also used for evaluation triggered from out of the Advanced Supplier List.
    End of the note.
    These events trigger a questionnaire, which pops up on the screen or enable a button to open the questionnaire. To carry out event-driven evaluation, you first have to specify in Customizing when and under which circumstances you want the evaluation to take place. For example, you can define that the evaluation is to occur for certain product categories, or suppliers, or purchasing organizations. You can also define the frequency (for example, every invoice/confirmation, or every second invoice/confirmation, and so on). For more information, see Customizing:  Integration with Other SAP Components  Data Transfer to the SAP Business Information Warehouse  Settings for Application-Specific DataSources (SRM)  Define Events for Supplier Evaluation in SRM
    Process
    Supplier Evaluation is used in the Confirmation and Invoice applications to evaluate day-to-day activities on the basis of operational documents. It can also be used from the Approved Supplier List.
    Supplier Evaluation Examples Application
    Possible Questionnaire
    Possible Criteria
    Confirmation
    Evaluation of goods
    Delivery on time?
    Condition of packaging?
    Confirmation
    Evaluation of services*
    Was the service performed in a timely fashion?
    Quality of service performed?
    Invoice
    Evaluation of invoice
    Invoice quantity = confirmed quantity?
    Was the invoice clearly presented?
    Approved Supplier List
    Evaluation of supplier
    Reliability of supplier?
    Price transparency of supplier?
    Note
    *Note the data protection regulations that apply when evaluating services.
    End of the note.
    For more information about SAP NetWeaver BI Reporting, see SAP Help Portal at  http://help.sap.com  SAP NetWeaver  BI Content  Supplier Relationship Management  Supplier Evaluation
    Ad-Hoc Evaluation: Supplier Survey Cockpit
    The Supplier Survey Cockpit is an application with which you can manage surveys to gain information about your suppliers. After completion of a survey, the survey data is transferred to SAP NetWeaver Business Intelligence (SAP NetWeaver BI) for reporting. Analyzing the survey outcomes in SAP NetWeaver BI helps you to always be up on your suppliers' performance regarding, for example, reliability, quality, and service.
    The Supplier Survey Cockpit enables you to gather information independently of a certain purchasing event. With the Supplier Survey Cockpit, you can do the following:
    Set up a survey
    Assign a questionnaire to the survey
    Distribute the questionnaire via e-mail and
    Monitor the responses
    Features
    To access the Supplier Survey Cockpit, choose Supplier Evaluation and then Survey Management under Detailed Navigation.
    By default, you find three queries: A survey query, a survey package query, and a survey monitor query. Depending on the query you choose, the table below the queries displays different information.
    To manage surveys, choose the survey query. Click on Create to create a new survey. Select a survey from the table and click on Display, Edit, or Delete to display, change, or delete a survey.
    To manage survey packages, choose the survey package query and click on the corresponding buttons.
    To download the table contents in MS Excel format, click on Export.
    For more information on the queries, which serve to monitor surveys, see Survey Monitoring.
    BR
    MUTHU

  • Perform VENDOR EVALUATION for MORE THAN ONE VENDORS at a time

    Hello all,
    Please guide for any process where i can perform Vendor Evaluation for MORE THAN ONE vendors AT A TIME.
    At my location there are around thousand vendors, which are to be evaluated, and difficult to perform the evaluation process one-by-one.
    (ME61/ME62/ME63)
    Detailed replies with various possibilities would be highly appreciated.
    Thanks & Regards,
    Joy Ghosh

    The vendor evaluation for some thousand vendors at the same time has already been in SAP long before they developed LSMW. The purpose of LSMW is to load data from a legacy system, of course you can (mis-)use it for a lot other things.
    But you should not always use LSMW if you are to lazy to go thru the SAP standard menu to find a transaction like ME6G
    There you define a job that runs RM06LBAT report.
    You first have to define a selection variant for this report. this can be done in SE38 by entering the report name, select variant, clicking display, then entering a name for the variant and clicking Create.

  • Standard report for Vendor Evaluation

    Hi everyone,
    Is there any standard reports (ALV) to display Vendor evaluation ranking list except ME65, ME6B, ME6H.
    any other Program names will also do...
    Thanks
    Sukriti...

    hi
    S_ALR_87012990 - Evaluation Comparison
    ME6H - Standard Analysis: Vendor Evaluation
    ME6E - Evaluation Records Without Weighting
    ME6C - Vendors Without Evaluation
    ME6B - Display Vendor Evaluation for Material
    ME65 - Evaluation Lists
    regards
    kunal

  • System setting for vendor evaluation incomplete

    HI....
    I want to caryout automatic vendor evaluation when i run t code ME63, its show an error system setting for purchase org incomplete where as i have maintained all the parameters from standarfd 0001, can anyone tell me how to carry out ven evaluation.
    Regards
    SARFRAZ

    Hi,
    Select SPRO --> Materials Management --> Purchasing --> Vendor Evaluation. Select following criteria -
    1) Define Weighing keys - Here define weighing keys in addition to 01- Equal Weighing & 02- Unequal Weighing (if required)
    2) Define Criteria - Here 5 standard criteria are maintained. Maintain additional criteria if required. Also maintain sub-criteria. Each main criteria contains some standard subcriteria. If required you may maintain additional subcriteria upto 20 per main criteria.
    3) Define Scope List - Here you may maintain how the evaluated vendors should be ranked.
    4) Define Purchase Organization Data for Vendor Evaluation - Here you may maintain main criteria & sub-criteria for your purchasing organisation. Also maintain score for equal & unequal weighing. Maintain point score for automatic  criteria for each percentage vainance
    Hope this fulfils your query
    Regards

  • No grouping maintained for vendor evaluation

    Hi Experts,
    I have loaded data till DSO 0SR_VE_CP successfully using Data Source 0WS_DATA_1_C. But when I am trying to load the data into the Cube 0SR_VE_C2 i am getting following error message:
    No grouping maintained for vendor evaluation (Message no. SRM_VE014)
    It would be appreciated if you help me step by step as i am new to this.
    Thanks in advance.
    Regards,
    Niranjan Chechani
    Edited by: Niranjan Chechani on Oct 20, 2011 11:03 AM

    Hi Niranjan,
    I'm trying to activate the standard data flow for DSO 0SR_VE_CP in Business Content, but no transformation between DSO -> DataSource is available there.
    How did you manage to load Supplier evaluation data into DSO 0SR_VE_CP from DS 0WS_DATA_1_C ?
    Thanks in advance.

  • Vendor Evaluation during Service entry sheet

    Dear all,
    I would like to know, which place in Service entry sheet, the score are entered for vendor evaluation and also please guide me how to run vendor evaluation back ground, by steps
    Thanks for your help and appreciated if you can help me immediate
    Regar

    1. Execute ME6G transaction
    2. Click Step icon or Edit>>Step or Press F6
    Click Goto>>Variant if variant exist or Click Maintain Variant (if variant dont exist)
    Select the variant and follow from Step 3 Given below
    If you dont want to maintain variant
    1. Execute ME6G
    2. Click Start Condition
           Click Immediate button or maintain date/Time
    3. click Check and Save
    4. Save the Transaction
    5. Go to SM37 Transaction
    6. Enter the selection parameter (Check all the checkbox in selection indicator)
    7. Check Check box Near the Job
    8. Click Spool
    9. Check Spool No check box
    10 Click ABAP List In Type Colomn
    11. Spool request display will be there

  • Vendor evaluation - General Service and support

    Hi
    What are the subcriteria that can be under General Service and support?
    How the scores are calculated for this?\
    If manual where can we enter the scores for these?
    Regards
    Soumen

    Hi,
    Following are the answers for your questions.
    What are the subcriteria that can be under General Service and support?
    Ans: - Subcriteria can be defined by us as per our requirement but SAP has provided following 2 Subcriteria;
    - Quality of service
    - Service timeliness
    How the scores are calculated for this?
    Ans: - For above 2 subcriteria, you can assign a scoring method as following;
    C Determination from quality rating of service
    D Determination from timeliness rating of service
    Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Criteria > Here maintain subcriteria for Service criteria and assign the scoring method
    At the time of processing Service Entry Sheet, under "Vendor evaln" Tab, you will have option to enter scores for the following subcriteria
    - Quality of service
    - Service timeliness
    Once you enter scores here, it will get calculated in ME61, if automatic evaluation is configured for above 2 subcriteras
    Config Path: - SPRO > MM > Puchasing > Vendor Evaluation > Define Purchasing Organization Data for Vendor Evaluation > Here for Service criteria and it's subcriteria do not activate manual maintenance indicator
    If manual where can we enter the scores for these?
    Ans: - And if you want to maintain values manually for Service criteria and subcriteria then activate the manual maintenance indicator in above config path and then maintain it duirng ME61 (Vendor Evaluation)

  • Custom report for vendor evaluation

    Hai All,
    My client requires custom report to show the vendor evaluation i.e., it has to show the working how it has arrived at the final score, to be clear systems works automatically and displays the final score based on certain main and sub criteria that working has to be shown in a table format for the purpose of TPM  audit.
    Regards
    R.Senthilnambi

    Hi Senthil,
    u can download the documents from sap help to show the logic to ur audit, how sap will calculate the scores.
    If they insist for certain data with logic, u can develop a z-report and show them for 10 or 20 materials.
    hope this resolves ur problem

Maybe you are looking for