Sms no longer showing in pc suite

ok this is baffling me...
first off .. info on the pc suit
PC-connection solution:
Versie 9.23.3.0
Nokia Connectivity Cable Driver:
Versie 7.1.17.0
Operating System:
Microsoft Windows Vista 64-bits editie, Service Pack 2
for so far this relevant information...
2 phones, same problem
1 the N80 and 2 the N97
hooked both up to PCsuite... all works perfectly
over 2 weeks back, while both were hooked into pcsuite, same pc/program (which should not be a problem). All has been working for months on end fine.
receiving and sending sms/mms
over abt 2 weeks back suddently after a receive or send, the SMS don't show up anymore for the N80
so i tought this might be a phone problem
rebooted the N80, hooked up, same problem
the MMS do show, the listing takes place, but the SMS do not appear anymore
and you are unable to send SMS via pcsuite, but you can send MMS.
baffling..
so hooked up the N80 to another computer, and... magically no problem
so the problem is not in the phone, but in the communication centre software.
Now i don't need the N80 that often, so on the second pc works for me aswell.
till yesterday.
the N97, I've send an SMS to a client, and after sending, refreshed to list
and SMS did not show anymore, only the MMS are shown.
identical problem to the other phone
I've checked different (googled) sites, but no direct solution found
neither on nokia site(s) or other related site(s).
For some or other reason, the pcsuite application decided to not display, retrieve... the SMS info, but it does show the MMS info
you can not send SMS via pcsuite, but you can send MMS out via pcsuite.
when i check settings => tab General
check for the supported announcements button
then although previously all three where green, now the announcements for incoming messages is red
 I'm sure more of you will have experienced the same thing
Maybe sumone has a workaround for the problem
or can enlighten me to correct this.
any info or assistance is welcome.
Solved!
Go to Solution.

update...
just received info of firmware update
so... just updated from v11.0.021 to v12.0.026
still same result
also... rebooted the pc where the problem is, and after reboot same deal.

Similar Messages

  • PC Suite: 7.1.40.6 Calendar no longer showing entr...

    Hi
    Since I updated to 7.1.40.6, 3 of the 4 Calendar views are no longer showing the entries on each day.  The one that is working is the full list of entries.  The day / week and month views no longer work.
    Also, having opened calendar once, you cannot open it again without re-booting the PC.  All that happens is that the CommunicationCentre process takes up somewhere between 50 and 100% of the CPU.  Killing the process and existing PC Suite only kind of fixes the problem - it lets the CommunicationCentre process start and the UI display, BUT the process goes straight to 100% CPU and the machine effectively locks up.
    Windows XP - SP3
    Dell Precision 490
    PC Suite 7.1.40.6
    Not synching with tool (Notes / Outlook).
    I have tried repairing without success.
    Please help!.
    Andrew

    Hey guys,
    for me the solution given by   olduser1 worked perfectly to solve my problem of connection. So I would recommend that if any of you have problems with the new PC Suite, then you should try to use the cleaner before a new installation.
    Anyway, I still have problems in getting music in my mobile external card...Pc Suite only works for dragging music into the phone and even when I set in proprieties that it should save the music in the card, it doesn't do it...any ideas?
    Still wondering why Nokia has a Forum when they don't give any answers to the problems of their own products! At least, thank you users for your feedback...
    Not at all happy with Nokia products right now.

  • XP no longer shows up as a startup disk

    After upgrading to leopard today, my XP partition no longer shows up as a startup disk.
    I had/have my windows partition on it's own drive that was NOT created with bootcamp. I pulled my osx disk from the my mac pro and installed windows on the disk i had in bay 2 using 100% of the disk (ntfs). after installing the bootcamp windows drivers, i reinserted the osx disk and all has been well for the last 4 months,... until the upgrade today that is.
    Now, when i go to the 'Startup Disk' preference Windows is no longer an option. the disk still shows up in Finder and I can navigate around the file system.
    Anyone have any ideas on how I can get it to show up again? I'd really rather not have to reinstall if i can avoid it.
    thx.

    I have exactly the same problem (well, maybe).
    I have installed MacFUSE and ntfs-3g. I don't know if this is of any relevance, because I don't know if it was working directly before I installed them.
    I have my OS X and NTFS volumes on the same physical disk. I also had to install Windows twice because I buggered it up the first time (formatted the partition as FAT32 and ran into a bunch of disk errors).
    I also notice that in WinClone I have 2 Untitled Volumes at /dev/disk0s3 and /dev/disk1s1. /dev/disk0s3 seems to be the legit Windows NTFS partition, but I have no idea what /dev/disk1s1 is about. I don't know if it's been there all along or not but perhaps it is confusing matters and stopping the legit Windows volume/installation from being detected...? Should that second volume exist at all? It doesn't exist according to the Disk util.
    edit: I used fdisk just to have a look at the two untitled partitions.
    Jacbook:dev jacteh$ sudo fdisk /dev/disk0s3
    Disk: /dev/disk0s3 geometry: 10651/255/63 [171117408 sectors]
    Signature: 0xAA55
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 72 368 111 45 - 371 101 51 [ 218129509 - 1701990410] <Unknown ID>
    2: 74 67 115 32 - 299 114 44 [ 729050177 - 543974724] <Unknown ID>
    3: 65 114 111 32 - 353 115 52 [ 168653938 - 0] Netware 3.xx
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    Jacbook:dev jacteh$ sudo fdisk /dev/disk1s1
    Disk: /dev/disk1s1 geometry: 0/4/63 [63 sectors]
    Signature: 0x0
    Starting Ending
    #: id cyl hd sec - cyl hd sec [ start - size]
    1: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    2: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    3: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    4: 00 0 0 0 - 0 0 0 [ 0 - 0] unused
    I can hold the option key upon startup and manually enter Windows like that, but I'd prefer to be able to restart and boot Windows without having to hold a key.
    Apart from not seeing the Windows boot volume in the system prefs pane, Boot Camp (and the rest of Leopard) has been excellent. I am impressed at the level of apple hardware support for windows. It seems to be much better than most native PC hardware.
    I am dying for an answer. It's a fairly minor problem in the grand scheme of things, but **** it's frustrating.
    Message was edited by: jacteh

  • Windows Partition No Longer Shows Up After Accidental Premature Closing of Camptune

    Mac OS X 10.7.5
    I was running Paragon Camptune to expand my Windows 7 partition. The progress bar reached the end and stayed there for about 30 minutes. The Camptune window was then accidentally closed and Camptune quit itself. I restarted the computer but the Windows partition no longer shows up when I try to boot it, only Mac OSX and Recovery Disk. The Bootcamp drive is no longer accessable from System Preferences, and the Bootcamp partition folder is no longer accessable in the Devices area of Finder. Camptune no loner recognizes that there was a partition. Thus, I am no longer able to access the partition's contents or delete it and make a new one.
    It would be preferable if I could fix the partition and have it accessable again, however I have no problem with deleting it and making a new partition. Any advice? Thanks for your time.
    Here is the information from the Partition Inspector:
    *** Report for internal hard disk ***
    Current GPT partition table:
    #      Start LBA      End LBA  Type
    1             40       409639  EFI System (FAT)
    2         409640   1151635239  Mac OS X HFS+
    3     1151635456   1152904991  Mac OS X Boot
    Current MBR partition table:
    # A    Start LBA      End LBA  Type
    1              1       409639  ee  EFI Protective
    2         409640   1151635239  af  Mac OS X HFS+
    3     1151635456   1152904991  ab  Mac OS X Boot
    MBR contents:
    Boot Code: Unknown, but bootable
    Partition at LBA 40:
    Boot Code: None (Non-system disk message)
    File System: FAT32
    Listed in GPT as partition 1, type EFI System (FAT)
    Partition at LBA 409640:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 2, type Mac OS X HFS+
    Listed in MBR as partition 2, type af  Mac OS X HFS+
    Partition at LBA 1151635456:
    Boot Code: None
    File System: HFS Extended (HFS+)
    Listed in GPT as partition 3, type Mac OS X Boot
    Listed in MBR as partition 3, type ab  Mac OS X Boot

    Hi Eric,
    Bootcamp does show up in the disk utility but it is grey instead of black like the Macintosh HD.
    The following information is available:
    Mount Point: Not mounted
    Format: Windows NT File System (NTFS)
    Owners Enabled: -
    Number of Folders: -
    Capacity:  274.55 GB
    Available: -
    Used: -
    Number of Files: -
    What might be the best way to continue to repair it. I do not have the option to click on "verify disk permissions" or "Repair Disk Permissions".
    Should I clone the hard drive in the target disk mode??
    I'm not the best at this stuff so any more advice would be greatly appreciated!
    Thanks!

  • IPod Touch no longer showing up under My Computer

    My iPod Touch is no longer showing in the device list under My Computer and as such can't access it to get my photos off it.
    It works in iTunes just fine, syncs fine, etc.
    If I go to Devices and Printers, it used to be listed under the Devices category as iPod, but now shows under the Unspecified category as Apple Mobile Device USB Driver, so basically a generic device.
    I have no devices with exclamation points or any other trouble signs under Device Manager.
    Help?

    Well, I am not entirely sure what exactly happened but after trying numerous times to reinstall the drivers and getting all sorts of error messages, I finally got Windows 7 to cooperate. The iPod Touch now shows up and is being detected as a digital camera under Devices, and under Computer it is showing up under Portable Devices. If I double-click on it I can view my pictures, transfer them, delete them, etc.

  • Status page in X3000 no longer showing any data.

    Using the latest 1.0.05 firmware on X3000
    Status page perpetually shows "Connecting" even though I'm connected.
    It no longer shows data such as the Internet IP address, Gateway etc.
    Only DNS IP addresses are shown.

    Hi, 
    Try to turn off your X3000 for around 60secs then check again. If it's doing the same issue after doing a powercycle, you may have to perform a hard reset then reconfigure your router.
    If everyone needs to believe in something, I believe I'll have another beer..

  • Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    Hello I send imessages to a phone number I receive delivery notice but sms does not show on receiving phone. Otherwise when receive imessage from other phone I reply and receiver sees SMS !!! Any explanation ?

    To my knowledge, I've only seen this for imessage only and not SMS.
    The other users would need to have send read receipts enabled on their phone.

  • Ipad app store no longer shows updates

    ipad app store no longer shows updates. was working fine until a couple days ago - whwt can I do?

    If you are getting the blank app update screen, many people are having this problem over the last couple of days.
    According to Fly150 in another discussion, this will work.
    If you want to update the Apps while waiting for Apple to fix Updates:
    1. Go to App Store
    2. Select Purchased
    3. Select All
    4. Scroll down to find the Apps showing update
    5. Select update on the Apps
    This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

  • My MacBook Pro no longer shows up on my devices how do I add it back

    Hi,
    My MacBookPro no longer shows up on my devices that is associated with my AppleId. Any suggestions? I did go to ITunes and follow the instructions on how to add and delete but it is not giving me the option to add.  Just had new hard drive installed and restored from time capsule without any other issues.
    Operating system is 10.9.4., Processor 2.7 Ghz Intel Core 17, Memory 16 GB, 1333 MHz DDR3, Storage 526.65 Free out of 999.35 GB. and I did not update to OS X Yosemite. (Because I've heard negative things about IPhoto and I'm working on several photobooks right now.
    Not sure if any of the information about my laptop is needed or useful, but thought it may be so am trying to be helpful.
    Thanks - ANY feedback is much appreciated.
    Frustrated mommy

    Hi there,
    When you say associated devices - are you referring to authorized devices within iTunes (i.e. devices that are able to access your iTunes account)? Or do you mean your registered devices when you log into your Apple ID on Apple's website?

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off the hard drive.  Is there anything I can do to get my computer to read it again or get my data off of it?
    I don't have access to another Mac to test it. 
    Thank you

    dead sata bridge card. very common problem.
    see all about it here:
    Your dead external hard drive is likely fine! Great hope for your 'faulty' external HD
    verify HD on another Mac however, if same, dead SATA card most likely

  • My settings icon is no longer showing.  How do get back on my screen?

    My settings icon is no longer showing on my iPad screen.  I can found it when I search for it.  But I how do I get the icon on my screen? Thanks in advance foray help you provide.

    Have you checked all your homescreens and app folders for it, also how many screens of apps have you got on the iPad (there is a maximum of 11) ?
    You could try a reset and see if you can find it after the iPad has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    Of you could try resetting your homescreens via Settings > General > Reset > Reset Home Screen Layout and see if you can then find it.

  • My ipod no longer shows in my itunes help, my ipod no longer shows in my itunes help

    my ipod is no longer showing up in my itunes, it use to i have tired everything, it will only charge can you tell me what could be wrong and how to fix it please

    There may be various issues associated with updating to iTunes 10.4.1 but I was able to fix my problem with iTunes not seeing my devices. iTunes would start fine but connecting my iPhone or iPad would result in the beach ball hang. I noticed the same thing would happen if I tried to click on the MobileMe icon on the status bar so it pointed to a sync services problem. Looking in "~/Library/Application Support/SyncServices" I saw some "ErrorInfo.txt" files with "SyncDataDirectoryCorruptedException, reason = The Admin Database does not exist. It should have been created by upgradedb."
    I had already reinstalled Lion to get iTunes10.4 back which didn't help so that step may not be necessary but I restored "~/Library/Application Support/SyncServices/Local" from my Time Machine backup from the day before the 10.4.1 update and that fixed my problem.
    I've re-updated to 10.4.1 and everything still works.

  • Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    # Question
    Since updating to Firefox 3.6.15, I can no longer print coupons from SmartSource. The error message is that Java is not detected. The check box is longer showing in the Options/Content of this version of Firefox, so I can not enable it.

    Same PC as I used to post the question. When I go to the "plug in check" page, it shows I am up to date and it is not disabled.
    Java(TM) Platform SE 6 U24
    Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers 1.6.0.24

  • Apps no longer show in iTunes 12

    When I'm in iTunes 12 and click on apps they no longer show up. Where did they go? They show on the iPhones pages 1,2, and 3 but not in the sidebar.

    You have to get to the display above from the upper left corner of iTunes, by clicking the iPhone icon here:
    You cannot get there by simply clicking the iPhone icon in the sidebar of some other display (e.g., music).

  • After updating to 7.0.6 my iphone no longer shows in itunes. However it is recognised by my PC (windows 8) when click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date. Has anyone else had this problem?

    Hi guys. After updating to 7.0.6 my iphone 5s is no longer showing in itunes. Strangley it is recognised by my PC (windows 8) when I click on my computer. I have tried reinstalling itunes and making sure the drivers are up to date, but this has made no difference. Has anyone else had this problem or does anyone have any advice? Thanks

    Device not detected in iTunes for Windows

Maybe you are looking for