SMSY for ERP JAVA and ABAP Stack

Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
I am using Somlam 7.1 on Oracle Linux system.
ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
J12 and T12 systems are connected via JCO.
SLD has been defined for both stacks and they are using the local SLD for the SolMan.
Your help is much appriciated.

Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
I was reading SAP Note 1344564, It states
III.Some Main Instances include other Main Instances (E.g., in SAP
ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
EP Core.). If the including Main Instance is installed, it's not
necessary to mark the included Main Instance(s) for relevance.
Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
Your input is appreciated.
Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

Similar Messages

JAVA and ABAP stack support pakages

Hi,
I am new on installation of solution manager server.
I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
Thanks Reza

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

Communicate link between Java and ABAP Stack for https

I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..

Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique.

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

Java and ABAP Stack

Hi All,
I am still not clear about role/function of java and abap stack in XI.
Can anybody explain?

Sireesha,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
please go through links::
ABAP and JAVA in Netweaver stack
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

Smsy initial_setup java and abap stack

Hi guys,
I have make an update of my system Solution manager in EHP1 7.1 SP03.
Now i have in the transaction SMSY :
1 more system SOL_NABP (ABAP STACK) initial_setup
1 more system composent SOL (JAVA STACK) initial_setup.
What are these systems (initial setup) ? Do i have to launch it ? How ?
Thanks to help me

Hi Jean,
You need to assign some roles to your user.
please see the link below, may be it will help you and give you a direction..
Solution Manager work center
Regards
Tripti

Problems with MiniSAP-Installation JAVA and ABAP Stack

Hi,
I am a freelance SAP application developer had bought the book and SAP Interactive Forms by Adobe, in order to incorporate me into the topic. In chapter 3, the installation and configuration of an exercise Systemes is described so that you can perform the practical part. I downloaded at the website mentioned the installation files and have performed the installation as described in the book. I have also stopped the service as described in SAP DB WWW.
The installation of the JAVA section runs smoothly and is operational after the installation. The ABAP part crashes, however. According to my research, it is because the ABAP part is also intends to install a MAXDB, although the Java-part has realized this already. Anyone know what I need to do, so I only described as the application server of the ABAP part of getting installed and not again the MAXDB.
Regards

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

SAProuter for Jco between Java and ABAP stack

When configuring Jco at Java only, there is an option to use SAProuter.
This is not for SMP download or OSS support.
So is there any document for this kind of SAProuter usage?
Thanks!

I don't quite understand why you need SAProuter between 2 SAP instances, which means they locate in 2 different network segments and cannot communicate each other directly. But let's assume this scenario:
1. ECC in network A, IP 10.10.10.1;
2. Portal in network B, IP 192.168.1.1;
3. SAProuter has 2 adapters, IP 10.10.10.2 and 192.168.1.2.
Make sure all message server and dispatch info are maintained correctly in service file (or corresponding file on other platform) on all 3 hosts, and then when you configure Portal Jco connection routestring you need is /H/<SAProuter IP>/S/3299 to enable them communicate each other. Usually this is for security purpose of potential network attack to SAP hosts from user IP, for instance:
4. All public users in network C, IP 172...*, then you need a SAProuter which has 3 adapters.
Regards,
Effan

SLD required ? if i'm having java and abap stack

Hi,
   How to call a aRFC if i have abap and java stack both installed in my machine,
Thanks,
santhosh.
Message was edited by:
        vanama santhosh

Hi Vanama,
                   U need SLD configured on ur system.
<a href="http://help.sap.com/saphelp_nw70/helpdata/en/44/bbb4aaf6cd673be10000000a1553f6/frameset.htm">http://help.sap.com/saphelp_nw70/helpdata/en/44/bbb4aaf6cd673be10000000a1553f6/frameset.htm</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a0d7c290-0201-0010-bbaa-d8f8af341796</a>
U can check this on ur system itself
http://server:port/sld/doc/sld.pdf
Then Jco is also required
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e</a>
regards
Sumit

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Java Stack and ABAP Stack

Hi Experts,
i am now confused about these two stacks: Java Stack and ABAP Stack.
for IR objects, like DT, MT, SI, MM, SM, Action, Process Integration Scenario
for ID objects, like profile agreements, receiver determination, interface determination,
1. where are these objects stored in? Java or ABAP stack?
and i know Adapter Engine is run on JAVA Stack while Integration Engine is on ABAP Stack.
2. how do they call the objects stored in different stack during processing?

Hi,
1. where are these objects stored in? Java or ABAP stack?
These objects are basically developed on the JAVA stack, when they are activated their runtime version is created on ABAP stack, which you can check in SXI_CACHE transaction.
2. how do they call the objects stored in different stack during processing?
Runtime versions of these objects are responsible for the execution of the interfaces.
-Supriya.

How is the interface between the Java Stack and ABAP stack is achieved?

How is the interface between the Java Stack and ABAP stack is achieved?..Please send me the answer to [email protected]

Hi,
By interface, I assume you mean the connection between the ABAP and the Java stacks in a double stack system.
The connection from Java to ABAP is through JCo connections defined in the WebDynpro section of the J2EE start page. So Java to ABAP requests are processed through JCo.
The connection from ABAP to Java is through RFC connections defined in TA SM59. The ABAP to Java requests are processed through RFC.
Refer https://dsd.esco-salt.com/StartPage/documents/integration/3.html for detailed explanation.
The UME can be maintained in either ABAP or in JAVA depending on the persistence.
Refer: http://help.sap.com/saphelp_nw70/helpdata/en/5b/5d2706ebc04e4d98036f2e1dcfd47d/frameset.htm
Check UME data source configuration.
Some quick FAQs can be found at:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ad47eb90-0201-0010-7cb2-ddfa5ed879ec
Hope this helps.
Best Regards,
Srividya.R

JAVA Stack and ABAP Stack not in Sync

Hi,
when i logged into the MI Server(7.0) gonr thru the following navigation :
Administration-->Mobile Infrastructure---->Mobile components
which i click on the search button i am getting the following error
"JAVA Stack and ABAP Stack not in Sync"
Already i redeployed the sapjra.rar, still i find the error unchanged.
Any help on this would be great........
Thanks,
vijay.

Hi
Refer this link
Need to Configure MI Server 7.0
As explained by veeraragavan in this link follow these steps
Following are in brief the roles required, just forward the same to your BASIS administrator.
In the ABAP Stack -Under Transaction SU01:
End User:
SAP_MI_SERVICE
Administrator / Critical Developers:
SAP_J2EE_ADMIN
SAP_MI_ADMIN
In the J2EE Stack - Under Identity Management:
End User:
No role required. You can give a role for display: SAP_JAVA_NWMOBILE_ADMIN_READONLY
Administrator / Critical Developers:
SAP_JAVA_NWMOBILE_ADMIN_SUPER
regards
Manohar
Edited by: Gouri Manohar Gadhamsetty on Jan 19, 2009 7:17 AM

Installing Java Stack and Abap Stack, same machine.

Hi all:
Does anybody installed Java Stack and Abap Stack on the same machine?
I installed ABAP stack first, and am trying now to install Java stack but it seems like at the end of the process, ABAP stack. (is not working now).
Any idea?

Not sure about installing both as I haven't tried either!
Anyway, in theory if the SIDs and instance numbers are completely different, then you should be OK. If you ahev the same SID or instance number, I can see possible problems,
Portal only runs on Java, so in theory any Java system will be OK. NWDW would be a good choice.

Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultant

Hello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala

SMSY for ERP JAVA and ABAP Stack

Similar Messages

Maybe you are looking for