Sneak preview Installation error, file source.properties not found
Hi all,
I am trying to install sneak preview (SAPNW2004sJavaSP9_Trial) with j2sdk-1_4_2_09 and jce_policy-1_4_2.zip as specified. The Installation was success upto a while but when I pass parameters to "secure store settings" it says there is no source.properties file in sneakpreview\java\ like that. If somebody have met with a similar problem and could overcome please help. Helping answer rewarded.
Thanks & Regards,
Sai Krishna. K
Hi Konchada,
Pls tell how you solved this problem...
I am in need of it... Thanks
Regards/ Guru
Similar Messages
-
Jasper integration error on oracle APEX. "Error : File null.jasper not found"
Hi All,
Recently we configured Oracle APEX and configured Jasper report on Glassfish 4.1. Everything went fine but when we try to run test report we are getting following error.
"Error : File null.jasper not found"
Can anyone help in this?
Database: Oracle 11g R2
APEX : 4.2
Glassfish 4.1
Jasper Report 1.3.0.2Hi Krunal,
Recently we configured Oracle APEX and configured Jasper report on Glassfish 4.1. Everything went fine but when we try to run test report we are getting following error.
"Error : File null.jasper not found"
Can anyone help in this?
How have you configured JasperReports with Oracle APEX on Glassfish 4.1? Have you followed some blog post or any documented method available?
Please share the installation details.
I got this one : Benjamin Intsiful on Oracle APEX: Configure Oracle Connection Pool in Glassfish V3 for Jasper Reports Integration
Have you followed the integration method documented and integration kit provided by Opal Consulting?
Refer : Jasper Reports Integration - Installation
Hope this helps!
Regards,
Kiran -
OBDC Data Source Error - Data source name not found and no default driver specified
Hello,
I get this error whenever I try to use the "Modify Microsoft Access Database" tab to update my
Access 2000 database after a conversion:
Unable to connect to target database.
java.sql.SQLException: [Microsoft] [ODBC Driver Manager]
Data source name not found and no default driver specified
Now, the weird thing is that when I log in as Administrator and go to the "Control Panel" there is
no "ODBC Data Sources" option to chose from. So I went to the "Microsoft ODBC Administrator"
from the "Configuration and Migration Tools" tab instead. I tried configuring "omwb_msaccess"
under the "User DSN" tab with both the name of my Access file, and the "small.mdb" file that was
in the omb directory. No go for either one. Whatever I try I still get the same pop-up box.
Question:
(1) What should I be putting for the "ODBC Data Source" when I try to Migrate my Access Database?
(2) Any other idea/configuration issue I might be missing that could do this? The process works up
to the Access Update point, and I configured the repository correctly.
Thanks
Aaron - [email protected]Nope, I'd already tried both of those things. I checked again, but no go.
I think the problem may be that I'm not entering the right value in the
"ODBC Data Source" field on the Migration Workbench "Modify Microsoft
Access Database" form - the same one where you enter a "Username" and
"Password" for the conversion. What should I be entering here? What is
the standard filename?
The log files aren't very informative to me. Here is the odbcconf.log:
==============
ODBCConf called with arguments: '/S /Lv odbcconf.log /F C:\WINNT\System32\mdaccore.rsp'
Data Struct:
Reboot First : 0
Use Response File : 1
Response File : 'C:\WINNT\System32\mdaccore.rsp'
Erase Response File: 0
Silent : 1
Continue on Error : 0
Log Mode : 2
Log File : 'odbcconf.log'
Actions:
8, '(null)', '(null)', ''
6, 'MS Code Page Translator|Translator=MSCPXL32.dll||', '(null)', '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
5, 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||', '(null)', '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
1, 'Microsoft ODBC for Oracle', 'CPTimeout=60', '"Microsoft ODBC for Oracle" "CPTimeout=60"'
17, 'simpdata.tlb', '(null)', '"simpdata.tlb"'
EXECUTING ACTIONS
Executing Action: INSTALLDRVRMGR
arg1: '(null)'
arg2: '(null)'
args: ''
Install Driver Manager succeeded
Return HR: 0x0
Executing Action: INSTALLTRANSLATOR
arg1: 'MS Code Page Translator|Translator=MSCPXL32.dll||'
arg2: '(null)'
args: '"MS Code Page Translator|Translator=MSCPXL32.dll||"'
INSTALLTRANSLATOR SQLInstallTranslatorEx succeeded
Return HR: 0x0
Executing Action: INSTALLDRIVER
arg1: 'Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||'
arg2: '(null)'
args: '"Microsoft ODBC for Oracle|Driver=msorcl32.dll|Setup=msorcl32.dll||"'
INSTALLDRIVER SQLInstallDriverEx succeeded
Return HR: 0x0
Executing Action: CONFIGDRIVER
arg1: 'Microsoft ODBC for Oracle'
arg2: 'CPTimeout=60'
args: '"Microsoft ODBC for Oracle" "CPTimeout=60"'
CONFIGDRIVER SQLConfigDriver succeeded
Return HR: 0x0
Executing Action: REGTYPELIB
arg1: 'simpdata.tlb'
arg2: '(null)'
args: '"simpdata.tlb"'
Return HR: 0x0
===========
Here is a snippet from the error.log:
==========
** Oracle Migration Workbench
** Release 9.2.0.1.0 Production
** ( Build 20020308 )
** ORACLE_HOME: c:\
** user language: en
** user region: US
** user timezone: PST
** file encoding: Cp1252
** java version: 1.1.8.16
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 5.0
** Classpath:
c:\\Omwb\olite\Oljdk11.jar;c:\\Omwb\olite\Olite40.jar;C:\Program Files\Oracle\jre\1.1.8\lib\rt.jar;C:\Program Files\Oracle\jre\1.1.8\lib\i18n.jar;c:\\Omwb\jlib;c:\\Omwb\jlib\Omwb.jar;c:\\Omwb\jlib\oembase-9_2_0.jar;c:\\Omwb\plugins\SQLServer6.jar;c:\\Omwb\plugins\SQLServer7.jar;c:\\Omwb\plugins\SQLServer2K.jar;c:\\Omwb\plugins\Sybase11.jar;c:\\Omwb\plugins\Sybase12.jar;c:\\Omwb\plugins\MSAccess.jar;c:\\Omwb\plugins\MySQL.jar;c:\\Omwb\drivers\mm.mysql.jdbc-1.2a;c:\\Omwb\plugins\Informix7.jar;c:\\Omwb\drivers\ifxjdbc.jar;c:\\Omwb\plugins\db2400v4r5.jar;c:\\Omwb\drivers\jt400.jar;c:\\lib\xmlparserv2.jar;c:\\rdbms\jlib\xsu111.jar;c:\\jdbc\lib\classes111.zip;c:\\lib\vbjorb.jar;c:\\jlib\netcfg.jar;c:\\jlib\ewt3.jar;c:\\jlib\ewtcompat-3_3_15.jar;c:\\jlib\share.jar;c:\\jlib\help3.jar;c:\\jlib\oracle_ice5.jar;c:\\jlib\kodiak.jar
** Started : Tue Jul 23 12:13:42 PDT 2002
** Workbench Repository : Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
** The following plugins are installed:
** Microsoft Access Release 9.2.0.1.0 Production
** Active Plugin : MSAccess
** Shutdown : Tue Jul 23 12:14:59 PDT 2002
I appreciate any assistance you could render me.
Thanks - Aaron -
Infa Error: Data source name not found and no default driver specified
All,
Infa version 8.1, DAC 795. Plain vannila installation with SQL server. Both client and server installed in same machine.
DAC connectivity both with infa and oltp working fine. When ETL is run, Informatica session logs are giving following error:
ERROR 10/2/2008 3:49:01 PM node01_PPMBIDEV1 MAPPING CMN_1022 Database driver error...
CMN_1022 [
[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
Database driver error...
Function Name: Connect
Database driver error...
Function Name: Connect
Database Error: Failed to connect to database using user [MDVYAS] and connection string [PPMCRMDEV1@OracleBI_Warehouse].]
Any pointers appreciatedHi,
Did you follow step 4.13.2 - 'Configuring Relational Connections in Informatica PowerCenter Workflow Manager' of the installation and configuration guide?
Manoj. -
Hi Guys,
I have just uninstalled and reinstalled SAP Netweaver 7.01 portal. The uninstall was clean and the reinstall also went without any errors.
However, immediately after this, when I open http://<host>:<port> I get the following error:
404 Not Found
The requested resource /main.jsp is not available
Details: File main.jsp not found in application root of alias [/] of J2EE application [sap.com/com.sap.engine.docs.examples].
If, instead, I open portal (http://<host>:<port>/irj), it works fine.
Anybody has any idea why this has happened and how can I resolve this issue?
Thanks,
Shitij
Edited by: Shitij Bagga on May 5, 2010 9:36 AM
Edited by: Shitij Bagga on May 5, 2010 9:37 AMHi Anil,
I don't see how this note is relevant here. It is just the j2ee engine start page which is not opening. If I go straight to the systeminfo page or the portal login page, they are all working.
Any experience on this issue with that note u suggested? Please share.
Thanks,
Shitij -
IDT ODBC Error - Data source name not found...
Hello,
In the IDT, I have created a successful connection to a Relational Connection to my SQL Server datasource. However, when I try to access the data in the Data Foundation, I get the error, "ODBC Driver Manager. Data source name not found and no default driver specified. I am trying to use a shortcut to the connection in the repository. I am able to make a local connection to this database using the same steps above but I'm only getting this error when using the respository connection.
I appologize if I have not explained this well or used the right terminology as I've only been using this tool for about a month with very little support. The support I do get does not know what this problem is as they are able to connect to it fine on their computer.
Thank you for your time and responses,
AaronHi Aaron
This is the product limitation.
Combination of 32-bit and 64-bit data providers in a Multi-source enabled Data Foundation is not supported.
Remove ODBC Drivers 32-bit for SQL Server from the user's workstation and Install ODBC Drivers
64-bit.
Regards,
Veer S. -
404 Error - File or Directory not found
Hi there
I have a simple CF page set to do a dump of the server only at this stage.
<cfdump var="#server#">
It works fine when I'm on the server itself and run from 127.0.0.1/mydomain/index.cfm
When I try to run from www.mydomain.com - I get a 404 file or directory not found
Is this a CF error or is this an error being thrown up from IIS
How do I get around this error ?
Thanks in advance.
Kind regardsHi Nexusxox,
In addition, To troubleshoot the winodws updates issue, please follow these methods:
1. You should be able to access the Windows Update website. If you can't access this site, try to use the
Windows Update Troubleshooter to fix the problem.
Refer to:
http://support.microsoft.com/kb/2497281#manually
2. Recreate SoftwareDistribution folder:
1) Stop the Automatic Updates and Background Intelligent Transfer Service services.
2) Delete or rename the %windir%\SoftwareDistribution folder.
3) Restart Automatic Updates and Background Intelligent Transfer Service services.
3. Reset Windows update:
How do I reset Windows Update components?
To do so: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge
Base: 322756 (http://support.microsoft.com/kb/322756/)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
NW04s 07 java sneak preview installation error
Hi,
I am getting the following error when I am trying to install NW04s 07 java Sneak preview .
<b>ERROR 2006-09-20 00:15:09
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilRebootDrv' does not exist on the 'localhost' host.</b>
I have the localhost entry in the hosts.ini file and turned off Norton anti virus.
Appreciate quick response
Srini Sandakahave a look may be it helps you
Re: Netweaver 2004s ABAP Sneak Preview
Regards
Subhash -
SAP sneak preview installation error reg MaxDB
Hello,
I am trying to install SAP sneak preview for Netweaver.
I made it till here working through various hurdles ,now I am little lost .The installation is having issues on step 13 of 40
I looked up the xcmdout log and the last few lines are below.
Please let me know of a way to proceed with installation.
ubprocess starts at 20070222030959
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_directput MCOD NO
Execute Session Command : exit
> Subprocess stops at 20070222031011
OK
> Subprocess starts at 20070222031011
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031026
OK
OK
OK
> Subprocess starts at 20070222031027
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 DATA C:\sapdb\J2E\sapdata\DISKD0001 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031039
OK
> Subprocess starts at 20070222031039
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 2 DATA C:\sapdb\J2E\sapdata\DISKD0002 F 128000
Execute Session Command : exit
> Subprocess stops at 20070222031051
OK
> Subprocess starts at 20070222031051
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** param_addvolume 1 LOG C:\sapdb\J2E\saplog\DISKL001 F 25600
Execute Session Command : exit
> Subprocess stops at 20070222031103
OK
> Subprocess starts at 20070222031104
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,********
Execute Session Command : param_startsession
Execute Session Command : param_checkall
Execute Session Command : param_commitsession
Execute Session Command : exit
> Subprocess stops at 20070222031116
OK
OK
OK
> Subprocess starts at 20070222031119
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_start
Execute Session Command : exit
> Subprocess stops at 20070222031137
OK
> Subprocess starts at 20070222031137
Execute Command : c:\sapdb\programs\pgm\dbmcli.exe -n shady_valley -d J2E -u CONTROL,******** db_state
Execute Session Command : exit
> Subprocess stops at 20070222031149
> Subprocess call failed
ERR
-24961,ERR_STATE: The operational state of the database instance could not be determined
-24994,ERR_RTE: Runtime environment error
no_id_provided_by_rte,no_text_provided_by_rteHi Shilpa,
Try incresing your virtual memory settings
Check out this link
Max-DB cannot determine current db state (NW2004s install)
Reward points if useful.
Thanks
Srinivas -
Hello,
I am trying to run my application (using Java) on windows which in turn calls the Remote Manager on Solaris(Solaris 9 on SPARC Processor).
It gives the following linker error:
ApiInitLocal():ApiInitLocal: START
ApiInitLocal():* * * A P I I N I T * * *
ld.so.1: java: fatal: relocation error: file /opt/rm902/remotemanager/soFile/libACEUser.so: symbol Sd_ApiInit: referenced symbol not found
Killed
I tried setting "LD_LIBRARY_PATH" , but that also didnt work.
Any help would be highly appreciated.
Thanks in advanceHello all
I am new to JNI and while trying to run my
to run my first program I am receiving an error in
compilation of the 'C' file. For ur clarity my taken
steps are given as follows:
a. First I created 'HelloNative.java'
Then I compiled it and after running created the
the HelloNative.h
b. Then I wrote the HelloNative.c file and when I
compile it using MS VC++ then it gives the
following error:
--------------------Configuration: helloNative -
- Win32 Debug--------------------
Compiling...
helloNative.c
f:\bin\hellonative.c(3) : fatal error C1083: Cannot
open include file: 'jni.h': No such file or directory
Error executing cl.exe.
helloNative.obj - 1 error(s), 0 warning(s)
PLZ HELP ME ON THIS.
So for a quick patch, copy the jni.h file from the include
directory of your java installation files to the include
files that your c complirer has and uses. -
Error 2003000: ODBC Error: Data source name not found or no default driver
Hi Guys
I am running Essbase (9.3.1) Integration server on 64-bit Microsoft Windows server 2003 (SP 2) and I get above error when I am trying create an OLAP metadata catalog using Integration Service Console.
Could anybody help me please?
Regards
ChandraGood day to you too, and thank you very much for your help.
I think you may be right. I didn't run the configurability utility and I am running Essbase Server & Integration Server as console applications (not as windows services). The problem with the Integration server is there no console application window for it but there is one for Essbase Server which I had to enter the password. If I run the Integration Server again under Command prompt then I get a message saying that it has been already running on this machine but I cannot see any console window. Do you think if reboot the server this problem go away? I look forward to hearing from.
Regards
Chandra -
Can anyone provide a fix or suggest fixes for this issue and is there another way around getting updates from the site that i can try. Not sure why it keeps coming up with this error each time i click the microsoft update option.
thanks
NexusxoxHi Nexusxox,
In addition, To troubleshoot the winodws updates issue, please follow these methods:
1. You should be able to access the Windows Update website. If you can't access this site, try to use the
Windows Update Troubleshooter to fix the problem.
Refer to:
http://support.microsoft.com/kb/2497281#manually
2. Recreate SoftwareDistribution folder:
1) Stop the Automatic Updates and Background Intelligent Transfer Service services.
2) Delete or rename the %windir%\SoftwareDistribution folder.
3) Restart Automatic Updates and Background Intelligent Transfer Service services.
3. Reset Windows update:
How do I reset Windows Update components?
To do so: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added
protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge
Base: 322756 (http://support.microsoft.com/kb/322756/)
If there is anything else regarding this issue, please feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
Data source name not found and no default driver specified.
Hi all,
I am using Microsoft Accessas as backn'd. when I am starting my Presentation Services I am getting this error> Data source name not found and no default driver specified.Your presentation services configuration file
$SADATADIR/web/config/instanceconfig.xml
contains an entry DSN which is the connection to the bi server
then inside your RPD(s) loaded by the bi server
you will have various connection pools in the physical layer
which connect to physical data sources such as MS Access
you can test a physical database connection
by right clicking a physical table
then "View Data" or "Update Row Count" -
Implfactory.properties not found error during application installation
Hi,
I am facing some problem during deployment of application on websphere in Linux machine.
it says "implfactory.properties not found". However when i try to install the same application on some other linux machine. It goes fine.
As this is happening during installation of kit. Can u please let me know which jar file is missing from the Websphere path.
~amanHi !! Could you tell me where I might find this implfactory.jar file ?
I've looked around several systems, but have yet to find this jar.
Most systems work, and only one does not.
thanks....... -
ERROR: exception symbol "09732" not found in resource file
I am trying to get a client to work with workflow services. I get 'ERROR: exception symbol "09732" not found in resource file' in the output when the method queryTasks is excecuted.
Jdeveloper 10.1.3.4 and SOA Suite 10.1.3.3.0
Any ideas?
Eydun
------------------ program ---------------------
package project1;
//import com.oracle.services.bpel.task.Task;
import java.util.ArrayList;
import oracle.bpel.services.workflow.client.IWorkflowServiceClient;
import oracle.bpel.services.workflow.client.WorkflowServiceClientFactory;
import oracle.bpel.services.workflow.query.ITaskQueryService;
import oracle.bpel.services.workflow.verification.IWorkflowContext;
import java.util.List;
import oracle.bpel.services.workflow.repos.Ordering;
import oracle.bpel.services.workflow.repos.Predicate;
import oracle.bpel.services.workflow.repos.TableConstants;
import oracle.bpel.services.workflow.task.ITaskService;
import oracle.bpel.services.workflow.task.model.Task;
public class Class1 {
public Class1() {
public void TryTask() {
try {
//Create JAVA WorflowServiceClient
IWorkflowServiceClient wfSvcClient =
WorkflowServiceClientFactory.getWorkflowServiceClient(WorkflowServiceClientFactory.WSIF_CLIENT);
//Get the task query service
ITaskQueryService querySvc = wfSvcClient.getTaskQueryService();
//Login as jstein
IWorkflowContext ctx = querySvc.authenticate("jstein",
"welcome1",
null, //Use default realm
null);//Not logging in on behalf of another user
//Set up list of columns to query
List queryColumns = new ArrayList();
queryColumns.add("TASKID");
queryColumns.add("TASKNUMBER");
queryColumns.add("TITLE");
queryColumns.add("OUTCOME");
//Create a predicate to query tasks that have a null outcome
String outcome = null;
Predicate predicate = new Predicate(TableConstants.WFTASK_OUTCOME_COLUMN,
Predicate.OP_EQ,
outcome);
//Create an ordering to order tasks by task number
Ordering ordering = new Ordering(TableConstants.WFTASK_TASKNUMBER_COLUMN
,true //Ascending order
,false //Nulls last
//Query a list of tasks assigned to jstein
List tasks = querySvc.queryTasks(ctx,
queryColumns,
null, //Do not query additional info
ITaskQueryService.ASSIGNMENT_FILTER_MY,
null, //No keywords
null, //predicate, //Only tasks with no outome set
ordering, //Order by ascending task number
0, //Do not page the query result
0);
//Get the task service
ITaskService taskSvc = wfSvcClient.getTaskService();
//Loop over the tasks, outputting task information, and approving tasks
for(int i = 0 ; i < tasks.size() ; i ++)
Task task = (Task)tasks.get(i);
int taskNumber = task.getSystemAttributes().getTaskNumber();
String title = task.getTitle();
String taskId = task.getSystemAttributes().getTaskId();
//Set the outcome
taskSvc.updateTaskOutcome(ctx,taskId,"APPROVED");
System.out.println("Task #"+taskNumber+" ("+title+") is APPROVED");
catch (Exception e)
//Handle any exceptions raised here...
System.out.println("Caught workflow exception: "+e.getMessage());
public static void main(String[] args) {
Class1 class1 = new Class1();
class1.TryTask();
------------------- output ---------------------
C:\java\jdk1.6.0_07\bin\javaw.exe -client -classpath C:\jdev11work\eej\mywork\Application3\Project1\classes;C:\oracle\jdev10134bpellibs\bpel\lib\bpm-infra.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-common.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel-thirdparty.jar;C:\oracle\jdev10134bpellibs\j2ee\home\jazncore.jar;C:\oracle\jdev10134bpellibs\j2ee\home\oc4jclient.jar;C:\oracle\jdev10134bpellibs\lib\xml.jar;C:\oracle\jdev10134bpellibs\lib\xmlparserv2.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\config;C:\oracle\jdev10134bpellibs\webservices\lib\orasaaj.jar;C:\oracle\jdev10134bpellibs\webservices\lib\soap.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\lib\bpm-services.jar;C:\oracle\jdev10134bpellibs\bpel\system\services\schema;C:\oracle\jdev10134bpellibs\bpel\lib\olite40.jar;C:\oracle\jdev10134bpellibs\jdbc\lib\ojdbc14.jar;C:\oracle\jdev10134bpellibs\bpel\lib\orabpel.jar;C:\oracle\jdev10134bpellibs\wsclient_extended.jar project1.Class1
<::> WorkflowService:: TaskQueryService.authenticate(): called. user = jstein identityContext = null onBehalfOfUser = null
<::> WorkflowService:: VerificationService.authenticateUser: attempting for user = jstein identityContext = null
<ISConfiguration::load> Found Configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::load> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::load>
<ISConfiguration::validate> Validate configuration=Configuration: realmName=jazn.com properties:{} has 1 providers:
<ISConfiguration::validate> Provider: service=Identity providerType=JAZN providerName=XML Provider properties:{usersPropertiesFile=users-properties.xml}
<ISConfiguration::validate>
<ISConfiguration::save> Save IdentityService configuration file into /C:/oracle/jdev10134bpellibs/bpel/system/services/config/is_config.xml
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: begin
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: call authenticate
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService:: user is authenticated!
<XMLAuthenticationService::authenticateUser> XMLAuthenticationService::authenticateUser():: end
<ServiceFactory::getService> Provider type is JAZN
<ServiceFactory::getService> JAZN's ProviderType=XML
<XMLIdentityService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLIdentityService::init> Load provider initialization complete
<XMLAuthenticationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthenticationService::init> Load provider initialization complete
<XMLAuthorizationService::init> Load provider initialization begin
<AbstractXMLProvider::loadUsers> XMLProvider::load() Load users from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<BPMUserImpl::<init>> Constacted user=cdickens
<XMLProvider::addUserToCache> User cdickens is loaded ....
<BPMUserImpl::<init>> Constacted user=wfaulk
<XMLProvider::addUserToCache> User wfaulk is loaded ....
<BPMUserImpl::<init>> Constacted user=sfitzger
<XMLProvider::addUserToCache> User sfitzger is loaded ....
<BPMUserImpl::<init>> Constacted user=jstein
<XMLProvider::addUserToCache> User jstein is loaded ....
<BPMUserImpl::<init>> Constacted user=istone
<XMLProvider::addUserToCache> User istone is loaded ....
<BPMUserImpl::<init>> Constacted user=jcooper
<XMLProvider::addUserToCache> User jcooper is loaded ....
<BPMUserImpl::<init>> Constacted user=mtwain
<XMLProvider::addUserToCache> User mtwain is loaded ....
<BPMUserImpl::<init>> Constacted user=jlondon
<XMLProvider::addUserToCache> User jlondon is loaded ....
<BPMUserImpl::<init>> Constacted user=ltolstoy
<XMLProvider::addUserToCache> User ltolstoy is loaded ....
<BPMUserImpl::<init>> Constacted user=fkafka
<XMLProvider::addUserToCache> User fkafka is loaded ....
<BPMUserImpl::<init>> Constacted user=szweig
<XMLProvider::addUserToCache> User szweig is loaded ....
<BPMUserImpl::<init>> Constacted user=mmitch
<XMLProvider::addUserToCache> User mmitch is loaded ....
<BPMUserImpl::<init>> Constacted user=jausten
<XMLProvider::addUserToCache> User jausten is loaded ....
<BPMUserImpl::<init>> Constacted user=achrist
<XMLProvider::addUserToCache> User achrist is loaded ....
<BPMUserImpl::<init>> Constacted user=rsteven
<XMLProvider::addUserToCache> User rsteven is loaded ....
<BPMUserImpl::<init>> Constacted user=cdoyle
<XMLProvider::addUserToCache> User cdoyle is loaded ....
<BPMUserImpl::<init>> Constacted user=wshake
<XMLProvider::addUserToCache> User wshake is loaded ....
<BPMUserImpl::<init>> Constacted user=guest
<XMLProvider::addUserToCache> User guest is loaded ....
<BPMUserImpl::<init>> Constacted user=bpeladmin
<XMLProvider::addUserToCache> User bpeladmin is loaded ....
<BPMUserImpl::<init>> Constacted user=default
<XMLProvider::addUserToCache> User default is loaded ....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadRoles> XMLProvider::load() Load roles from source:users-properties.xml
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role BPMAnalyst is loaded .....
<XMLProvider::addRoleToCache> Role BPMWorkflowAdmin is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users begins
<XMLProvider::addRoleToCache> Role LoanAgentGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role LoanAnalyticGroup is loaded .....
<XMLProvider::addRoleToCache> Role Supervisor is loaded .....
<XMLProvider::addRoleToCache> Role California is loaded .....
<XMLProvider::addRoleToCache> Role WesternRegion is loaded .....
<XMLProvider::addRoleToCache> Role EasternRegion is loaded .....
<AbstractXMLProvider::loadPrincipals> AbstractXMLProvider::load() Loading users ends
<XMLAuthorizationService::init> Load provider initialization complete
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: begin
<BPMServiceJAZNBase::getRealm> Realm=[Realm: jazn.com]
<BPMServiceJAZNBase::getRealm> BPMAuthenticationServiceImpl::getRealm():: end
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMIdentityImpl::getActions> BPMIdentityImpl::getActions()
<BPMIdentityImpl::getAllGrantedRealmRoles> Identity has the following granted realmRoles=[RealmRole: BPMWorkflowReassign, RealmRole: BPMWorkflowSuspend, RealmRole: BPMAnalyst]
<RoleProperties::load> Resource oracle/tip/pc/services/identity/role.properties is loaded, s_properties={BPMWorkflowSuspend=SUSPEND,RESUME, BPMWorkflowAdmin=ADMIN, BPMWorkflowReassign=REASSIGN, BPMPublic=VIEW_WORK_LIST,ACQUIRE,WITHDRAW,ESCALATE,ERROR,PUSH_BACK,RENEW,RELEASE,REQUEST_INFO,SUBMIT_INFO,CUSTOM,VIEW_TASK_HISTORY,VIEW_SUB_TASKS,UPDATE,ADHOC_ROUTE,OUTCOME_UPDATE_ROUTE, BPMSystemAdmin=, BPMWorkflowViewHistory=VIEW_TASK_HISTORY,VIEW_PROCESS_HISTORY, BPMAnalyst=VIEW_REPORTS}
<BPMIdentityImpl::getActions> Identity has the following roles:[BPMWorkflowReassign, BPMWorkflowSuspend, BPMAnalyst]
<BPMIdentityImpl::getActions> Role: BPMWorkflowReassign
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, REASSIGN]
<BPMIdentityImpl::getActions> Role: BPMWorkflowSuspend
<BPMIdentityImpl::getActions> Actions: [RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE]
<BPMIdentityImpl::getActions> Role: BPMAnalyst
<BPMIdentityImpl::getActions> Actions: [OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, ACQUIRE, ADHOC_ROUTE, RENEW, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, ERROR, VIEW_WORK_LIST, RELEASE, ESCALATE, VIEW_REPORTS]
<BPMIdentityImpl::getActions> Identity has the following actions:[RESUME, OUTCOME_UPDATE_ROUTE, REQUEST_INFO, CUSTOM, VIEW_SUB_TASKS, WITHDRAW, PUSH_BACK, SUSPEND, ACQUIRE, RENEW, ADHOC_ROUTE, UPDATE, SUBMIT_INFO, VIEW_TASK_HISTORY, VIEW_WORK_LIST, ERROR, ESCALATE, RELEASE, REASSIGN, VIEW_REPORTS]
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: VerificationService.authenticateUser: successful for user = jstein identityContext = null
<::> WorkflowService:: TaskQueryService.authenticate(): completed. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ==
<::> VerificationService.createWorkflowContext: Request NOT authenticated by WS-Security framework
<BPMAuthorizationServiceImpl::lookupUser> BPMAuthorizationServiceImpl::lookupUser():: begin, userName=jstein
<BPMUserImpl::<init>> User=jstein was created
<BPMAuthorizationServiceImpl::lookupUser> User is found, user=RealmUser: jstein
<BPMPrincipalImpl::getAttribute> Attribute=languagePreference is not set. Populate principal=jstein
<::> WorkflowService:: TaskQueryService.queryTasks(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein displayColumns = TASKID, TASKNUMBER, TITLE, OUTCOME optionalInformation = assignmentFilter = My keywords = null predicate = null ordering = wfn.taskNumber ASC startRow = 0 endRow = 0
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My keywords = null predicate = null
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): called. token = c9pHcmBFtc4DWR0OLJvz8rFEzdme6Pp2TZRWe5OrGZEHVSHodTb5cYfhEt/ZgboPeVZZzz9FipCUi4EMWqyqKIXfQxTW8YdqoisIJyA4TUhFa2SyU0fNHjDEy9sm/JSYqqFy/nvYWsjO2nPXdsbbnpLuHUwoM2IZ+D/mTaN6pgcIPS+iyKbVgV3wBqFiqGHbuasTyn7SE6ZBnw3Xr5QOHQ== ctxUser = jstein assignmentFilter = My
<::> WorkflowService:: TaskQueryService.getAssignmentFilterPredicate(): completed. assignmentFilterPred = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
<::> WorkflowService:: TaskQueryService.getCombinedPredicate(): completed. combinedPredicate = ((wfn.taskId=wfa.taskId AND wfa.isGroup =? AND ( wfa.assignee IN (?))) OR ( ( wfn.originalAssigneeUser IN (?)) AND wfn.taskId=wfa.taskId) AND wfn.isGroup =?) AND ( wfn.identityContext IS NULL )
ERROR: exception symbol "09732" not found in resource file.
<::> ORABPEL-09732
<::>
<::>
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:231)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
<::> at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
<::> at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
<::> at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
<::> at project1.Class1.TryTask(Class1.java:55)
<::> at project1.Class1.main(Class1.java:91)
<::> Caused by: java.lang.NullPointerException
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
<::> at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
<::> ... 7 more
<2008-10-14 23:59:00,952> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.workflow.repos.PersistencyDriver.getDatasourceName(PersistencyDriver.java:177)
at oracle.bpel.services.workflow.repos.PersistencyDriver.initNonTransactionDataSource(PersistencyDriver.java:198)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getNonTransactionService(PersistencyDriver.java:224)
at oracle.bpel.services.workflow.repos.PersistencyDriver.getInstance(PersistencyDriver.java:152)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:213)
at oracle.bpel.services.workflow.query.impl.TaskQueryServiceWSIF.queryTasks(TaskQueryServiceWSIF.java:172)
at oracle.bpel.services.workflow.query.client.TaskQueryServiceWSIFClient.queryTasks(TaskQueryServiceWSIFClient.java:66)
at oracle.bpel.services.workflow.query.client.AbstractDOMTaskQueryServiceClient.queryTasks(AbstractDOMTaskQueryServiceClient.java:180)
at project1.Class1.TryTask(Class1.java:55)
at project1.Class1.main(Class1.java:91)
Caught workflow exception:
Process exited with exit code 0.Although the versions 10.1.3.4 and 10.1.3.3 are close and should be able to use 10.1.3.4 JDev for most 10.1.3.3 development, the human tasks is the one exception. 10.1.3.3 had a few bugs fixed therefore the jar file used in JDev 10.1.3.4 may not be compatible with 10.1.3.3.
I would either use JDev 10.1.3.3 or upgrade SOA Suite to 10.1.3.4
cheers
James
Maybe you are looking for
-
Is it possible to install dsee7 into a solaris 10 sparse zone?
hello all, i'm trying to install DSEE7 on a Sun T2000 (solaris 10 sparc) into a zone. The following command never returns: ldap1-root% /local/dsee7/bin/dsccsetup status DSCC Agent is not registered in Cacao DSCC Registry has not been created yet ldap
-
No special characters in sequence names?
Is there a reason, why it's not possible to use special characters in sequence names in the mapping workbench 9.0.4? Or is it just a bug? In earlier versions it was possible. It's a convention from our customer to use the $-character in the sequence
-
Punctuation jumps my cursor in Apple Mail
Whenever I create an email in Apple Mail, if I put in a single or a double quotation mark, it moves the cursor down one line. It doesn't make a hard return just dumps it down to the beginning of the next line. Every contraction jumps the cursor and
-
if i have problems say with any line 6 gear i can eventually contact a tech' through email to help sort problem out, is there any such method with logic or mac problems ??
-
Problems running Adobe Connect add-in under XenApp
This is a real stab in the dark but it's a serious problem for us. Something has changed recently with Adobe Connect that means the add-in (adobeconnectaddin.exe) is hanging at the "Connecting" prompt. We're running Windows 2003 Terminal Server with