SNMP OID for 5108 Chassis input and output Watts?

Anybody know these?
Craig

Craig,
OID for cucsEquipmentChassisStatsTable --  1.3.6.1.4.1.9.9.719.1.15.10
UCS MIBs are available here
ftp://ftp.cisco.com/pub/mibs/supportlists/ucs/ucs-manager-supportlist.html
HTH
Padma

Similar Messages

  • SIngle reference for PXI 6509 Input and Output

    Hi ,
    I am using 96 channel PXI 6509 as a DIO, In this 96 channels i need to assign 1st port for input, 2nd port for output  and 4th and 5th for input so on. its is not a big deal using labview but labview creates seperate reference( Task in) for input and ouput.
    I need to have a single reference for both input and output ( like we have in NI DCpower for SMU)
    Can any one suggest me how i can achive this?
    Thanks and best regards,

    I would accomplish this with an Action Engine that handles all of your tasks.  Alternatively, make a class that handles all of the tasks.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • SNMP polling for 5108 Chassis

    I'm attempting to set up SNMP statistics polling for the 5108 Chassis with 4 half width blade servers. I can get SNMP data from the 6120 Fabric Extender just fine such as IFs and such, but I don't see any OIDs corrisponding to the chassis.
    Is there a separate host I should poll for the chassis, or perhaps a different community name?
    I'm specifically looking to monitor power draw from the four Chassis PSUs, as well as the two FE PSUs.
    root@sj-mon:~# snmpwalk -v 2c -c public ucs1 .1.3.6.1.4.1.9.9.117.1.1.1
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.470 = INTEGER: 2
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.1.471 = INTEGER: 2
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.470 = STRING: "CentiAmps @ 12V"
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.2.471 = STRING: "CentiAmps @ 12V"
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.470 = INTEGER: 4538
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.3.471 = INTEGER: 4538
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.470 = INTEGER: 29
    SNMPv2-SMI::enterprises.9.9.117.1.1.1.1.4.471 = INTEGER: 29
    Here is all I've been able to pull for the FE PSUs, and the 4538 value doesn't seem to have any correlation to what's being shown in the UCS Manager under Statistics.
    Thanks!

    There are no stats for the chassis.
    You can only snmpget stats for the "NXOS" part of the Fabric Interconnect.
    You can get snmptraps for all of UCS (go a google for UCS-MIB, and there's a doc explaining this on cisco.com - do a google for site:cisco.com ucs documentation roadmap).
    At the end of the year I believe a full MIB will be available to do what you want.
    If you want stats, use the XMLAPI.
    Cheers
    Steve

  • Input and output on same device, producer/consumer structure

    Hello interested people,
    I have a question about using the same device for both digital inputs
    and outputs.  I have written a simple program of one while loop
    that continuously polls the device, processes, and requests.  I
    have addressed the device using two DAQmx Asst. and I have attached
    them with their error in/out cluster terminals to provide data flow and
    eliminate the chance of addressing the devices at the same time (which
    produces an error).  Now I want to change this program structure
    to a producer/consumer loop foundation with state machine.  
    In this design, I will have the DI in the producer loop and the DO in
    the consumer loop, under one of the states.  I can't simply
    connect the error in/out ports in this configuration, so my question is
    how to avoid the error caused by addressing the same device
    simultaneously with two different tasks (input and output)?  I
    have attached two VI's, the "One Loop" vi is the original configuration
    (simplified), and the Producer-Consumer vi is a NONSENSICAL program
    that simply represents the desired configuration.  (I don't need
    any comments on the programming of this vi, it is only an example for
    illustration of the problem). 
    I am thinking about bundling the input data and the error cluster, both
    from the PXI 6528 DI, into one cluster, queueing that up, and
    unbundling the de-queued elements for some kind of data flow between
    the producer loop and the "Request" state of the consumer loop. 
    Is this the right approach, or am I barking up the wrong tree?
    Thanks
    Attachments:
    One Loop DO DI.vi ‏102 KB
    Producer-Consumer DI-DO.vi ‏106 KB

    Hello,
    It sounds to me like you really have two modes:
    1. user interface actions determine execution
    2. user interface is locked, and execution is automated.
    I think it would make sense to use the producer consumer for an architecture.  Basically you would do the following:
    1. program the producer to handle the user interface as you normally would.
    2. provide one additional event case in the producer which would be your "automated handling" case.  In that case, you could put a state machine which could run until whatever conditions were met to put your program back in "user interface mode".
    Keep in mind that you can use custom USER EVENTS to programmatically generate events ie. you can trigger the start of your "automated handling" form anywhere in your code at virtually any time.
    I think this would allow you to take advantage of the producer consumer architecture in its intended spirit, while integrating an automated routine.
    I hope this helps!
    Best Regards,
    JLS
    Best,
    JLS
    Sixclear

  • How can I use a different driver for audio input and output?

    I did a search of course, and came up with something about an aggregate. I have no idea what this is, how to do it, or if it would even work for me.
    What I am trying to do is:
    1) Record into Logic Express using my Tascam US-122.
    2) Have playback come out of my computer sound system, not the Tascam.
    If I go over to the Audio setup window, I can only record when the driver is set to Tascam US-122. Likewise, I can only listen to sound when my Built-In Audio is selected. It gets rather annoying going between the two.
    So, would this aggregate thing solve my problem? If so, how do I do it? Thanks for any help!
    -allen

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

  • How can I make Apple Earphones be the Input and Output for Audio

    I have some older headphones and they aren't compatible with a Mid 2010 (Intel Core i3) 21.5 Inch iMac
    Is there some way to make Apple Earphones be the Input and Output for Audio in the iMac
    This is a problem for me personally as when I am talking to someone on Skype the iMac picks up the In-built Microphone audio, and yes the headphones I'm using do work straight from the iMac as audio output
    Any help is appreciated

    you can connect the headset to something like this
    http://www.ebay.com/itm/NEW-MaelineA-3-5mm-Female-to-2-Male-Gold-Plated-Headphon e-Mic-Audio-Y-Splitter-/381100440348
    and then connect the mic to the input and the headset to the headset port

  • How to use a bluetooth cellphone for audio input and output

    Hello, I was wondering how to set-up my Mac Book so that I can use my bluetooth cellphone for audio in and audio out. Ideally, I would like to use my handset for talking on iChat and Skype. Has anyone had any luck doing this? When I bond my cellphone these optiosn do not appear. I know that this is easy to do on a Windows machine but I am not sure about how to do it on my Mac Book.
    Thanks!

    Yes it should do what you want.
    Go to "Audio Midi Setup", and go to the Audio menu and click "Open Aggregate Device Editor". The interface is pretty simple but if you do get stuck, just use the help function in Audio Midi Setup, as it has a step by step guide.
    Then when you return to logic, go to the Preferences>Audio>Drivers section and select Aggregate Device as the new driver rather than either the built in sound or the tascam. Then the inputs and outputs will apply to BOTH devices.

  • I have on;y one audio port can i use it for input and output at the same time?

    i have the new macbook pro 13 in and i want to connect aguitar as input and output on an amp but i have only one audio port

    You can't use the jack as an input and output simultaneously. The solution is to look for a USB or Firewire interface to get your guitar sound into the computer.

  • (Input and) output formats from Photoshop Elements 6 for Mac

    I noticed that (until midnight PT, anyway) Amazon has Photoshop Elements for the Mac at a lower price than usual.  This brings up a question for me: What output formats can Photoshop Elements 6 produce?  In particular, can it produce PNG?  Also, can it accept PNG as input?

    I think that all the formats like .bmp, camera RAW, EPS,PICT, TIFF, Filmstripn, IFF, JPEG, Photoshop pdf, Photoshop RAW,PNG etc are supported for both input and output.

  • When you set up tracks what is best to pick for the input and output?

    When you set up tracks what is best to pick for the input and output? also what is the buss output? Thanks

    First part of the question I don't understand, so could you elaborate please?
    Second part: bus output is used for submixes, for example, let's say you want the same EQ to be applied to all guitars in the song, so instead of using same EQ plug-in on all guitar tracks, you feed the output from these tracks to a bus track and use the effect just once on this bus submix.

  • I'm trying to record in Adobe Audition and it keeps saying my the sample rates for my input and output devices do not match.  How do I correct this?

    I'm trying to record in Audition and it keeps saying my sample rates for the input and output devices don't match.  How do I fix this?

    I finally have communication between the ISA One and Audition. I moved the optic cable to another SPDIF on the computer and from the SPDIF to ADAT on the ISA One and it finally agreed that the communication was at the same clock speed. The audio was not intelligible so I moved the optic cable back to the original configuration and I can record voice that is clean.          

  • Multiple inputs and outputs using DAQmx VIs

    Hello,
    I am fairly new with the LabView programming language.  I have a few training books that I have been reading, and I have been following online tutorials and reading the forums.  However, I have come to a problem where I don’t see a clear solution.  I am using LabView 2009 (9.0f3) and DAQmx VIs.
    I am using a NI 9172 chassis PLC, with two 9201 AI cards, 9217 AI RTD card, 9472 DO card, 9263 AO card, and two 9237 AI Bridge cards.
    I am reading eight analog inputs with the 9201 cards, two analog RTD inputs with the 9217 card, three digital outputs with the 9472 card, three analog outputs with the 9263, and eight analog inputs with the 9237 cards.
    I wrote a simple program to test one digital output task, two of the analog output tasks, and a single analog input task.  I put all of them in the same while loop, and it worked perfectly.  However, when I add analog input tasks to the same loop, I get an error 200022.    So I tested each sensor individually by changing the channel before each run.  I searched error 200022 and found that this is because I cannot start another analog input task until the previous one ends.  With this said, I don’t know how to acquire an analog voltage in the same task as an analog RTD voltage.  Both inputs take different constants in the start task DAQmx icon.
    Attached is my test program.  It is titled “Test All”. This is the program I used to test the various sensors.  I tested the input sensors one at a time, and it worked fine.  A few tasks are written just to test functionality, and will be added to later.  The data is only displayed on the screen.  I will add triggers and data write to disk functions later.  This program works now, but if I add more analog inputs, it will generate the 200022 error.
    Can someone show me how to correctly write the code for multiple inputs and outputs using DAQmx?  All training materials and tutorials I can find all show a single input or single output, not multiples of each.  Thanks for looking.
    -Randy
    Attachments:
    TestAll-NI.vi ‏32 KB

    Hi RandyC,
    The Knowledge Base article Using Different Types of DAQmx Global Channels in the Same Task goes into a little more depth of what Bryan is talking about, and it also includes some example code to help show what to do.
    Hope that helps,

  • SSIS: How to use one Variable as Input and Output Parameter in an Execute SQL Task

    Hello,
    i need your help,I'm working on this issue since yesterday and have no idea how to deal with it.
    As I already said in the tilte i want to start a stored procedure via a Execute SQL Task which has around 15 prameters. 10 of these should be used as input AND output value.
    As an example:
    i have three  Variable:
    var1    int        2
    var2    int     100
    var3    int     200
    the stroed procedure:
       sp_test
          @var1 int
          @var2 int output
          @var3 int output
       AS
       BEGIN
            SET @var2 = @var2 * @var1
            SET @var3 = @var3 + @var1
       END
    So in the Execute SQL Task i call the Stored Procedure as follwos:
        Exec sp_test  @var1 = ?, @var2 = ? output, @var3 = ? output
    (I use an OLE DB Connection)
    The parameter mapping is as follows:
    User::Var1        input                   numeric              0                 -1
    User::Var2        input/output         numeric              1                 -1
    User::Var3        input/output         numeric              2                 -1
    Now my problem. If i set  Var2 and Var3 as Input parameter the values are still the same after running the package. If i set them to a output value the are both Null because the procedure doesnt get any values.
    I already tried to list them a second time - like
        User::Var2        input                  numeric              1                 -1
        User::Var2        output                 numeric              1                 -1
    or i use a new variable
        User::Var2                  input                  numeric              1                 -1
        User::Var2Return        output                 numeric              1                 -1
    but i alwas get the error
    "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
    Has anybody an idea how I can solve this problem?
    Thanks a lot.
    Kind Regards,
    Alice

    Hi Alain,
    thx for your answer.
    I have around 15 procedures called one after the other to calculated and modify my values. Each procedure is responsible for an other but overlapping set of variables. So i thought it would be a good idea to call them one after the other with the needed variables via a execute sql task.
    So if i use a result set, how i get my stored procedure to return 10 values? I would have to use a Function instead of a procedure, wouldn't i?
    As if i have 15 procedures this would be a lot of work.
    But thanks a lot for the idea. I think an other idea would be to create one function which calls all stored procedures and returns all the calculated values as a result set, wouldn't it?.
    Kind Regards.
    Alice

  • How do I create an xControl with multiple inputs and outputs?

    Hello,
    i am trying to write a new Xcontrol Element. In the data model I can create data types using the cluster to create compound types, eg an int and an int array. But how do I create an xcontrol which has multiple data inputs and outputs?
    Kind Regards

    Limping_Twerp wrote:
    Alright: I see: An xcontrol is either an input OR an output. How do I achieve an output? Secondly: So you are saying the only Elements that can have multiple inputs and outputs are VIs?
    Can you take a few steps back and explain what you are actually trying to do. SubVIs and Xcontrols have nothing in common and it is not clear why you even try to compare them side by side (e.g. in terms of the number of connectors).
    Your questions about input or output tell us that you seems to have some misconceptions about xcontrols. Xcontrols are like regular controls, except they have some built-in intelligence that you can program. Most front panel object can be either controls or indicators and the same is true for Xcontrol. You create an Xcontrol, and after placing it on the front panel you can decide if it should be a control (where the code reads the value) or an indicator (were the code writes values to it). When you define the xcontrol facade, you also need to program how the visuals change if it is changed from control to indicator or vice versa.
    As a first step, you should opend the example finder and look at some xcontrol examples.
    Again, what are you actually trying to do? 
    LabVIEW Champion . Do more with less code and in less time .

  • FINALLY INPUTTING and OUTPUTTING Annotations!

    Ok, before everyone thinks that this is a very bad solution, I have to tell that I`m no programmer and my knowledge of PostgreSQL, Ruby or any other language is very poor.
    With useful help from Jamie Hodge, fbm and Nicholas Stokes (mainly)
    I could manage to write a command for inputting and outputting from Final Cut Server Annotations.
    So lets go to the fun part:
    INPUTTING:
    1- Create a Response called "Annotations IN" (or whatever you want):
    a - Reponse Action: "Run an external script or command"
    b - Run Script > *Commnad Path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
    Command Parameters: psql px pxdb -c "COPY pxtcmdvalue FROM '/FCSRV/annotation-in.txt' USING DELIMITERS '|';"
    2 - Create a poll Watcher with name: "Watch for Annotations IN"
    a - Enable: true
    b - Monitor Address: Chooses a Device (create a new one or use a tmp one) and path to where you`ll going to put a txt file with the annotations.
    c - Response List: Choose the Response you created "Annotations IN" in my case.
    d - Event Type Filter: Created, Modified
    e - Poll Watcher > Listing Frequency: 2 (or any number of seconds you feel like it).
    Listing multiple: 2
    Wildcard include Filter: *.txt (or any custom extensions you want)
    3 - Create a txt file and use this as a template:
    {ASSET_ENTITYID}|1527|{TCIN}/(30000,1001)|{TCOUT}/(30000,1001)|{Annotation}|{USE RID}|{DATE}
    Where:
    {ASSET_ENTITYID} = Is the entityid of your asset. You can find what number it is by issuing:
    /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxentity.address LIKE '/asset/%';"
    This will output ALL your assets, so if you know the name or want to parse the name you can use:
    /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.entityid, pxmdvalue.value AS asset_name FROM pxmdvalue INNER JOIN pxentity ON pxentity.entityid = pxmdvalue.entityid WHERE pxmdvalue.fieldid='1543' AND pxmdvalue.value='ASSETNAME' AND pxentity.address LIKE '/asset/%';"
    Where in ASSETNAME you`ll have to put your Asset Name without extension.
    {TCIN} and {TCOUT} is, of course, the TC`s points. In the form of: HH:MM:SS;FF
    {Annotation} is the commentary.
    {USERID} (in my case was 1)
    {DATE}: This one is tricky. My example is 2009-03-15 19:31:15.839795-03
    So is in the form YYYY-MM-DD HH:MM:SS.????? I really don`t know the rest. Could be milliseconds?
    Of course one can write a script to translate everything from a txt file like:
    ASSETNAME | TCIN | TCOUT | ANNOTATIONS | USER
    But as I`ve said I`m no programmer
    Ok.. now the time for the OUTPUT:
    The command-line is:
    /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value='ASSETNAME';"
    Where ASSETNAME is the Asset name without the extension.
    Or issuing the following to OUTPUT ANNOTATIONS from ALL assets:
    /Library/Application\ Support/Final\ Cut\ Server/Final\ Cut\ Server.bundle/Contents/Resources/sbin/fcsvr_run psql px pxdb -c "select * from pxtcmdvalue;"
    Adding "> /PATHTO_WHERE_IN_WANT/ANNOTATIONSOUTPUT.TXT" at the end will put all output into a txt file.
    It`s possible (in theory) to:
    1- Create a boolean md field in FCSRV called "EXPORT Annotations" (don`t choose lookup)
    2- add or create a md group called "Export Annotations" and add the above md field to it (don`t choose lookup)
    3- Add "Export Annotations" md field to Asset Filter md group
    4- Make a Response for Running external command. Command path: /Library/Application Support/Final Cut Server/Final Cut Server.bundle/Contents/Resources/sbin/fcsvr_run
    Command Parameters: psql px pxdb -c 'SELECT pxmdvalue.value AS Asset_NAME, pxtcmdvalue.value, pxtcmdvalue.begintc, pxtcmdvalue.endtc FROM pxmdvalue INNER JOIN pxtcmdvalue ON pxmdvalue.entityid = pxtcmdvalue.entityid WHERE pxmdvalue.value=[FileName];' > ~/Desktop/ann-out.txt
    (I`m having problem with this, it doesn`t work).
    5- Make a Subscription that if Export Annotations modified = true, trigger if changed and trigger the Response above.
    6- Add exporting annotations md group to Media md set.
    In theory it`s possible to modify the FinalCutServerIntegrationSample get and input annotations instead of adding another "comment" field to md group list.
    Few!
    Ok so please help beautify this out!
    This will be very useful for a lot of people.... We know that it`s only a matter of time to FCSVR have this function built-in... but this "time" could be years.
    So let`s start ourselves!
    Thank you very much!!
    Regards!

    AlphaBlue wrote:
    jverd wrote:
    What were you hoping for? Someone reading your mind for what exactly you need, and handing you a giftwrapped answer, without you doing any work or clearly communicating a specific problem? This site doesn't really work that way.Fair enough. I'm asking for insight into how to input from and output to a StarOffice Spreadsheet into/from a Java program. (Think java.io except with spreadsheet files instead of .txt files.) I already answered that question.
    I need to accomplish this without the use of a community-created library.That's a bizarre requriement. Why?
    >
    Okay, [here you go|http://lmgtfy.com/?q=communication+between+StarOffice+Spreadsheets+and+Java].
    If you don't have any knowledge or experience, on the matter, please refrain from directing me to a google search. I assure you, I have already performed such a task.How would I know that.
    But okay, let's say I know that. Let's say you bothered to point out that you've already done that. Further, let's say I do have knowledge of the subject at hand. Maybe I'm an expert. Maybe I wrote Star Office and an open source library (which wheel for some reason you must reinvent). You are assuming that I also have psychic powers, so that I can read your mind and know exactly what you've read so far and exactly what parts of your very broad and vague question said reading did not answer.
    In short, you have received answers commensurate with your questions.

Maybe you are looking for