SNMP OID for DHCP on Server 2012

We recently installed Server 2012 standard on one of our servers and were trying to keep a graph of DHCP lease use. Anyway the OIDs for DHCP in Server 2008 R2 started with "1.3.6.1.4.1.311.1.3.2.1.1". If I try to snmpwalk these same OIDs on the new Server
2012 (We the DHCP server configured and active), I get:
Error in packet.
Reason: (genError) A general failure occured
Failed object: SNMPv2-SMI::enterprises.311.1.3.2.1.1
I'm using SNMPwalk and I've never had a problem with this before. Any idea what would cause this? Thanks!
Thanks!

I'm having the same issue. OIDs just don't work against a 2012 DHCP server. I can snmpwalk other OIDs, just not DHCP :(
Firewall has been disabled (and there were already adequate snmp rules allowing the traffic). Since I can query other OIDs, I'm ruling out firewall.
Has this info been removed in 2012?

Similar Messages

  • REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER

    I am using a window 7 professional  service pack 1 and I purchase REMOTE DESKTOP SERVICES CLIENT ACCESS LICENSES FOR MICROSOFT WINDOWS SERVER 2012 STANDARD AND DATACENTER. but  the seller did not send me any installation CD or instruction
    on how to use it.
     Please how can I use it on my window 7 professional  service pack 1.
    Thank you.

    Though Bill is absolutely correct for most CALs, Remote Desktop Services does have its own special licensing server.  I haven't installed one on 2012, yet, but here is a step-by-step guide for 2008. 
    http://technet.microsoft.com/en-us/library/dd983943(v=ws.10).aspx
    Here is a lab guide for 2012 -
    http://technet.microsoft.com/en-us/library/jj134160.aspx
    But, the explanation of your environment begs the question - what are you trying to do?  You say you have a desktop OS and you are talking about Windows Server products.  In that light, your question does not make a lot of sense.
    . : | : . : | : . tim

  • Snmp oids for the command "show counters interface intx/y delta"

    Hello,
    I have a question about SNMP OIDs for the command "show counters interface intx/y delta" on Catalyst6500. The customer wants to create graphs for the following values:Overruns, qos0Outlost, InErrors, OutErrors, InDiscards, OutDiscards etc..
    Is possible to get these values using SNMP??
    Thank you
    Roman

    Thank you, Dan. These OIDs are for the output from the command "show interface int x/y". But I think, that these OIDs are not for the command "show interface int x/y delta".
    Roman

  • Akamai Download Error for Hyper-V Server 2012 R2

    I am trying to download the Eval for Hyper-V Server 2012 R2.
    I keep getting the same error message:
    Unable to save File
    Please try again to save to a different location.
    I have tried this on multiple computers and browsers, all with the same error.
    what am I doing wrong?

    Hi leomoed,
    Yes , it is always running in the background .
    Use the Download Manager for efficient installations, time-saving features, and automatic restarting if the download process is interrupted.
    http://msdn.microsoft.com/en-us/subscriptions/bb153537.aspx
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • SNMP OIDs for solaris 8

    Hello
    Someone could tell me where to find a list of SNMP OIDs for solaris 8
    thank you for your cooperation

    Thank you, Dan. These OIDs are for the output from the command "show interface int x/y". But I think, that these OIDs are not for the command "show interface int x/y delta".
    Roman

  • SG-500 - SNMP OID for CPU Load?

    Hello,
    i have several SG500 (Standalone and stacked). How can i get the CPU Load via SNMP? Who knows the correct SNMP OID for CPU Load?
    In the MIB which are provided as download a wasn't able to find the correct OID.

    Hello,
    There are three OIDs available for CPU usage:
    CPU utilization for 5 seconds
    .1.3.6.1.4.1.9.6.1.101.1.7.0
    CPU utilization for 1 minutes
    .1.3.6.1.4.1.9.6.1.101.1.8.0
    CPU utilization for 5 minutes
    .1.3.6.1.4.1.9.6.1.101.1.9.0
    This came from a scrap note I had in an e-mail, so I am not exactly sure where this information is originally.
    Let me know if that works for you,
    Christopher Ebert - Network Support Engineer
    Cisco Small Business Support Center
    *please rate helpful posts*

  • Looking for MS SQL Server(2012 or older versions) all commands

    HI,
    Looking for MS SQL Server(2012 or older versions) all commands, i.e., all available sql server commands.
    Is there any reference manual or MS KL to get all commands in SQL Server ?
    Thanks in advance

    Thanks for link
    Sean Gallardy and Jingyang Li.
    This is is not usefull for my requirement.
    What i am looking is..SQL Server commands  like examples... DDL/DML comands...create/alter
    Examples: Insert/update/delete,truncate.......etc
    Create database,create procedure.......etc
    Alter database,shutdown,drop,create....etc
    Looking for list of all commands in one place/doc in SQL Server.
    Thanks

  • Migration DHCP from server 2012 R2 to 2012

    Hi,
    how to do DHCP role transfer from windows server 2012  R2 server to 2012 server. tried to export and import db ,while importing db getting an error "TLS configured but not supported"
    Thanks,
    Shamal 

    Hi,
    In addition, you can install Windows Server Migration Tools on the destination and source servers and then use Windows PowerShell cmdlets to perform migration. For more detailed information, please refer to the links below:
    DHCP Server Migration: Preparing to Migrate
    Install, Use, and Remove Windows Server Migration Tools
    DHCP Server Migration: Migrating the DHCP Server Role
    Best regards,
    Susie

  • Minimum/Recommended Hardware Requirements for DHCP on Windows 2012 R2

    Hello,
    I am in the process of building two VM's on Windows Server 2012 R2 in-order to run DHCP with Failover.
    Before I build my VM Servers I would like to know if there are Recommended Hardware specs that these servers should be built with?
    I've been looking around for a little while and can't seem to find anyone or anywhere that these requirements are posted.
    Any help would be greatly apreciated!
    Thanks,
    André

    Totally agree with Henrik that DHCP is a very lightweight application and does not require much hardware.  In fact, it is often deployed as another role on a Domain Controller.  The thinking there is that the DC is something you want to have available
    all the time, just like DHCP and DNS.  Why not put them on the same box.
    My only difference in suggestion about hardware recommendations would be to use the 2012 recommendations instead of the 2008 recommendations, though they are pretty much the same -
    http://technet.microsoft.com/en-us/library/dn303418.aspx
    . : | : . : | : . tim

  • DHCP Failover Server 2012

    Hi,
    I have a Problem with DHCP Failover in Windows Server 2012
    We configured 2 Windows Server 2012 with DHCP Role and created a Scope with loadbalancing algorithm.
    The Problem is, that the two DHCP Servers Show different statistic Information. DHCP 1 has 254 addresses and 218 in use. DHCP Server 2 has 254 addressses and 187 in use.
    We found situations when one DHCP Server has no available IP addresses and the other one has about 40% available addresses.
    Why do the Servers have different available address spaces ? We have one scope with one class c net, 254 addresses.
    Our Szenario is with this config not high available, cause of sometimes running out of IP addresses on one DHCP Server.
    Thanks for help
    Björn
    Björn Schiemann LemonTec IT Systems KG htttp://www.lemontec.de

    Hi Bjoern,
    Would you please provide us your detailed load balance configurations.
    In load-balance mode of operation both the servers respond to client requests. Here’s how the servers ensure the distribution of client requests between themselves:
    Each DHCP server on receiving the client request calculates hash of the MAC address in the client request as per hashing algorithm specified in RFC 3074. Each server hashes any MAC address
    to a value between 1 and 256. If the load distribution ratio between the 2 servers is left at the default of 50:50; and if the hash of the MAC address falls between 1 and 128 then the first server will respond to the client request else if the hash is any
    value between 129 and 256, the other server responds to the client. This ensures that only one server responds for a specific client. If the load distribution ratio has been changed by the admin to a different value, the distribution of hash buckets would
    be in that proportion. The admin does not need to configure the MAC addresses on any server configuration a-priori.
    Quote from DHCP Failover Load Balance Mode
    http://blogs.technet.com/b/teamdhcp/archive/2012/08/06/dhcp-failover-load-balancing-mode.aspx
    In addition, I notice that you have a Class C network for the scope, why does each DHCP server have 254 IP address available?
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Download Links Broken for english Sql Server 2012 Express

    Hi,
    it seems that the download links for Sql Server 2012 Express Edition is broken for the english version.
    None of the links on the microsoft download center works.
    I am able to download a german version from:
    http://www.microsoft.com/de-de/download/details.aspx?id=29062
    But changing the language to english results in a "We are sorry, the page you requested cannot be found."
    Take care,
    Martin

    Hello,
    I created the following Microsoft Connect item about this issue:
    https://connect.microsoft.com/SQLServer/feedbackdetail/view/958840/download-links-are-broken-for-sql-server-2012-express-and-sql-server-2008-r2-express
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Reading SNMP OID for used storage on px12-400r

    Hi, does anyone know how get the correct value for used disk space via snmp on the px12-400r nas?
    All capacity is configured as one big cifs share. I want to monitor the usage of space with snmp.
    If I do a snmpwalk (v3) I can pinout the filesystem /mnt/pools/A/A0 on OID 1.3.6.1.2.1.25.2.3.1.3.38.
    If I read the oid for StorageUsed I get a strange negative value: -1084997477
    This value changes while data are written to the cifs share so it seems to be monitoring. But what to do with this negative value?
    Thanks for any help!
    /Anders

    Hello anders-px12-400
    I recommend checking with rtrevino from his thread.   The unit's are different, but the firmware is bascially the same across all Lifeline devices
    LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
    US and Canada: https://lenovo-na-en.custhelp.com/
    Latin America and Mexico: https://lenovo-la-es.custhelp.com/
    EU: https://lenovo-eu-en.custhelp.com/
    India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
    http://support.lenovoemc.com/

  • Configuring a Certificate for ADFS on Server 2012 R2

    Preparing to install ADFS on Server 2012 R2 for SSO to applications outside of our organization.  For my needs, do I need two certificates? One for SSL and one for Claims?
    We have an internal Microsoft CA that I can get certs from. I have read that Microsoft suggests using a self-signed cert for claims. Can someone corroborate this for me?
    Since ADFS 2012 R2 doesn't use IIS, if I have IIS installed and request a cert from my internal CA, can I still use it for my ADFS installation?
    Orange County District Attorney

    Hi Sandy,
    Based on my research,
    Server authentication certificate (SSL)is used to secure
    Web traffic for communication with Web clients or with federation server proxies, while token signing certificate is an X509 certificate, its associated public/private key pair is used by federation servers to
    digitally sign all security tokens that they produce.
    Self-signed Certificates can be used for a lab, but should not be used in production deployments.
    Here are some related articles below I suggest you refer to:
    Certificate requirements for federation servers
    http://technet.microsoft.com/en-us/library/cc783182(v=WS.10).aspx
    ADFS Certificates - SSL, Token Signing, and Client Authentication Certs
    http://blogs.technet.com/b/adfs/archive/2007/07/23/adfs-certificates-ssl-token-signing-and-client-authentication-certs.aspx
    Setting up an ADFS lab environment - Part 1
    http://blogs.technet.com/b/adfs/archive/2007/02/26/setting-up-an-adfs-lab-environment-part-1.aspx
    I hope this helps.
    Amy Wang

  • Laptop config for running Windows Server 2012

    Hello,
    For demo purpose I need to install Windows Server 2012 on a laptop, and some other 64 bits applications.
    Do you experiment a specific laptop which is running fine with this OS?
    For example I tried with Intel i5 and 16 GB RAM : Excel takes 10 min to load and most of the time it announces "Not responding". Same thing for all the other applications. I'm quite paralyzed in my job.
    Thanks for advises!

    Hi,
    I am not sure what is wrong with your setup, but Windows Server 2012 can run on laptop totally fine.
    Especially with your rig. Can you tell us did you do a fresh install of Windows Server 2012?
    I checked some pages (not to jump to conclusions myself), and I have found out that others didn't have any issues with the setup.
    These are the requirements (doesn't matter if it is a standalone physical machine or a laptop):
    Windows Server 2012 requirements
    Make sure your drivers are up to date.
    In this article you will see that the guy used a laptop on which he had Windows Server 2008 (lower config than yours), and it worked just fine:
    Installing Windows Server 2012 on ThinkPad T61
    Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

  • Vvideo Drivers for RD430 windows server 2012

    We have tried to  download the drivers for video in our RD430 windws server 2012 however , we do no find any .
    Am I looking at the wrong support center? would you mind helping us ?
    Thanks

    Good day and welcome to the community.
    If you go to the RD430 Driver Matrix, are the drivers you seek available?
    Regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

Maybe you are looking for

  • Error in invoking target 'dm_on ioracle' of makefile 'rdbms/../ins_rdbms.mk

    Hello All. I am trying to install Oracle Application Server 10g release 2(1.2.0.2) on Red Hat Enterprise Linux ES Release 4 64 bits. But got the following errors. End output from spawned process. Exception thrown from action: make Exception Name: Mak

  • Can I set the Ipad 2 to default to wifi?

    Can I set the Ipad 2 to default to wifi?

  • My 1/8 notes don't play in Logic pro 9. How can i fix this?

    Whenever I load a synth in sylenth1 or esp (etc.) all the notes just don't play and I get a wierd clicking noise For example pretend the capital letters are the ones heard and the non caps are the ones that make the clicking noise AAAAAAAABbbbbbbbCcc

  • Looping videos in a quicktime export

    I have 6 videos on a single slide, each of which has a different duration. So I loop all of them to avoid paused videos, which works very nicely in the Keynote presentation mode. However, when I export the slide to a quicktime movie, the videos don't

  • Billing plan in VBKD-FPLNR

    Hi Gurus,              When I am creating debit/ Credit memo, for couple of debit/ Credit memo requests corresponding VBKD-FPLNR (Billing plan) value is coming. But it is happening randomly (As I don't know reason). Can anyone tell me using which con