SNMP Service Timeout Issue

Hi,
I am facing SNMP timeout issue with 3 of my Windows Servers (2008 R2 Enterprise Edition). I am using Network Monitoring System to monitor devices. The issue I am facing with these servers is that the NMS is not able to poll CPU and Memory graphs.
I have restarted the SNMP service many times but no use. I rebooted one server and Its problem is gone. But rest of the two servers are still with the same condition (not rebooted yet).
I used the "Paessler SNMP Tester" to check the issue but sometimes it passes and mostly gives "No response" or "Timeout".
I also used "SnmpWalk.exe" with command 'snmpwalk -r:<server ip> -c:community' but after processing few OID's it gives error "%Failed to get value of SNMP variable. Timeout."
Can anyone help to identify the problem and how to resolve it?

Hi Zain,
Can you try to ping your server with the command "ping your server ip
-t"? It may be a network issue.
Besides, is there any warning or error related SNMP in the event viewer of the server? It may give some hints.
Here is a article about how to troubeshoot SNMP,
Troubleshooting SNMP
http://technet.microsoft.com/en-us/library/cc738839(v=WS.10).aspx
Best Regards.
Steven Lee
TechNet Community Support
Hi Steven,
Thank you for the response. I tested "SnmpWalk" both locally on the same server and from network as well but the response is same
"%Failed to get value of SNMP variable. Timeout.". However, I have checked the ping response and it is very much smooth. The server is actually an Active Directory Domain Controller.
The article you provided above applies to Windows Server 2003, Windows Server 2003 R2, Windows Server 2003 with SP1, Windows Server 2003 with SP2. I have Windows Server 2008 R2 installed on servers.
Can you provide me the event id for any warning or error related to SNMP for Windows Server 2008 R2? It would be then easy for me to filter the alerts.
Thank you!

Similar Messages

Svn with Apache Timeout issue

Hello Archers,
I've set up an svn Server with Apache folloing your wiki on my raspberry pi.
https://wiki.archlinux.org/index.php/LAMP
https://wiki.archlinux.org/index.php/Subversion_Setup
Unfortunately I get errors when I try to commit several files (15 or so). I think it is a timeout issue, however I don't know where to specify the timeout in the httpd.conf (or httpd-ssl.conf)
This is a client error message:
Commit failed (details follow):
Unexpected end of svndiff Input
And this the corresponding server side log:
[date] [dav:error] [pid 448:tid 2854220848] (70007)The timeout specified has expired: [client 192.168.178.55:63819] Timeout reading the body (URI: /Dokumente/!svn/txr/9-q/Music/myfile.mp3) [408, #0]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] mod_dav_svn close_stream: error closing write stream [500, #185004]
[date] [dav:error] [pid 448:tid 2854220848] [client 192.168.178.55:63819] Unexpected end of svndiff input [500, #185004]
I assume it is some error like this: http://subversion.apache.org/faq.html#s … -truncated
I think I don't have specified the timeouts correctly, since I haven't found the default option.
tl:dr
Do you know how to set the timeouts in the apache configuration file?
I very much appreciate your help.
arch on pi
Here are my configuration Files with my position for the timeout order:
httpd-ssl.conf:
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailed information about these
# directives see <URL:http://httpd.apache.org/docs/2.4/mod/mod_ssl.html>
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Required modules: mod_log_config, mod_setenvif, mod_ssl,
# socache_shmcb_module (for default value of SSLSessionCache)
# Pseudo Random Number Generator (PRNG):
# Configure one or more sources to seed the PRNG of the SSL library.
# The seed data should be of good random quality.
# WARNING! On some platforms /dev/random blocks if not enough entropy
# is available. This means you then cannot use the /dev/random device
# because it would lead to very long connection times (as long as
# it requires to make more entropy available). But usually those
# platforms additionally provide a /dev/urandom device which doesn't
# block. So, if available, use this one instead. Read the mod_ssl User
# Manual for more details.
#SSLRandomSeed startup file:/dev/random 512
SSLRandomSeed startup file:/dev/urandom 512
#SSLRandomSeed connect file:/dev/random 512
SSLRandomSeed connect file:/dev/urandom 512
# When we also provide SSL we have to listen to the
# standard HTTP port (see above) and to the HTTPS port
Listen 443
## SSL Global Context
## All SSL configuration in this context applies both to
## the main server and all SSL-enabled virtual hosts.
# SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite HIGH:MEDIUM:!aNULL:!MD5
# Speed-optimized SSL Cipher configuration:
# If speed is your main concern (on busy HTTPS servers e.g.),
# you might want to force clients to specific, performance
# optimized ciphers. In this case, prepend those ciphers
# to the SSLCipherSuite list, and enable SSLHonorCipherOrder.
# Caveat: by giving precedence to RC4-SHA and AES128-SHA
# (as in the example below), most connections will no longer
# have perfect forward secrecy - if the server's key is
# compromised, captures of past or future traffic must be
# considered compromised, too.
#SSLCipherSuite RC4-SHA:AES128-SHA:HIGH:MEDIUM:!aNULL:!MD5
#SSLHonorCipherOrder on
# Pass Phrase Dialog:
# Configure the pass phrase gathering process.
# The filtering dialog program (`builtin' is an internal
# terminal dialog) has to provide the pass phrase on stdout.
SSLPassPhraseDialog builtin
# Inter-Process Session Cache:
# Configure the SSL Session Cache: First the mechanism
# to use and second the expiring timeout (in seconds).
#SSLSessionCache "dbm:/run/httpd/ssl_scache"
SSLSessionCache "shmcb:/run/httpd/ssl_scache(512000)"
SSLSessionCacheTimeout 6000
## SSL Virtual Host Context
<VirtualHost _default_:443>
# General setup for the virtual host
DocumentRoot "/mnt/sda1/svn"
ServerName 192.168.178.48:443
ServerAdmin [email protected]
ErrorLog "/var/log/httpd/error_log"
TransferLog "/var/log/httpd/access_log"
# SSL Engine Switch:
# Enable/Disable SSL for this virtual host.
SSLEngine on
# Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate. If
# the certificate is encrypted, then you will be prompted for a
# pass phrase. Note that a kill -HUP will prompt again. Keep
# in mind that if you have both an RSA and a DSA certificate you
# can configure both in parallel (to also allow the use of DSA
# ciphers, etc.)
# Some ECC cipher suites (http://www.ietf.org/rfc/rfc4492.txt)
# require an ECC certificate which can also be configured in
# parallel.
SSLCertificateFile "/etc/httpd/conf/server.crt"
#SSLCertificateFile "/etc/httpd/conf/server-dsa.crt"
#SSLCertificateFile "/etc/httpd/conf/server-ecc.crt"
# Server Private Key:
# If the key is not combined with the certificate, use this
# directive to point at the key file. Keep in mind that if
# you've both a RSA and a DSA private key you can configure
# both in parallel (to also allow the use of DSA ciphers, etc.)
# ECC keys, when in use, can also be configured in parallel
SSLCertificateKeyFile "/etc/httpd/conf/server.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-dsa.key"
#SSLCertificateKeyFile "/etc/httpd/conf/server-ecc.key"
# Server Certificate Chain:
# Point SSLCertificateChainFile at a file containing the
# concatenation of PEM encoded CA certificates which form the
# certificate chain for the server certificate. Alternatively
# the referenced file can be the same as SSLCertificateFile
# when the CA certificates are directly appended to the server
# certificate for convenience.
#SSLCertificateChainFile "/etc/httpd/conf/server-ca.crt"
# Certificate Authority (CA):
# Set the CA certificate verification path where to find CA
# certificates for client authentication or alternatively one
# huge file containing all of them (file must be PEM encoded)
# Note: Inside SSLCACertificatePath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCACertificatePath "/etc/httpd/conf/ssl.crt"
#SSLCACertificateFile "/etc/httpd/conf/ssl.crt/ca-bundle.crt"
# Certificate Revocation Lists (CRL):
# Set the CA revocation path where to find CA CRLs for client
# authentication or alternatively one huge file containing all
# of them (file must be PEM encoded).
# The CRL checking mode needs to be configured explicitly
# through SSLCARevocationCheck (defaults to "none" otherwise).
# Note: Inside SSLCARevocationPath you need hash symlinks
# to point to the certificate files. Use the provided
# Makefile to update the hash symlinks after changes.
#SSLCARevocationPath "/etc/httpd/conf/ssl.crl"
#SSLCARevocationFile "/etc/httpd/conf/ssl.crl/ca-bundle.crl"
#SSLCARevocationCheck chain
# Client Authentication (Type):
# Client certificate verification type and depth. Types are
# none, optional, require and optional_no_ca. Depth is a
# number which specifies how deeply to verify the certificate
# issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth 10
# TLS-SRP mutual authentication:
# Enable TLS-SRP and set the path to the OpenSSL SRP verifier
# file (containing login information for SRP user accounts).
# Requires OpenSSL 1.0.1 or newer. See the mod_ssl FAQ for
# detailed instructions on creating this file. Example:
# "openssl srp -srpvfile /etc/httpd/conf/passwd.srpv -add username"
#SSLSRPVerifierFile "/etc/httpd/conf/passwd.srpv"
# Access Control:
# With SSLRequire you can do per-directory access control based
# on arbitrary complex boolean expressions containing server
# variable checks and other lookup directives. The syntax is a
# mixture between C and Perl. See the mod_ssl documentation
# for more details.
#<Location />
#SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
# and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
# and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
# and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
# and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \
# or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
# SSL Engine Options:
# Set various options for the SSL engine.
# o FakeBasicAuth:
# Translate the client X.509 into a Basic Authorisation. This means that
# the standard Auth/DBMAuth methods can be used for access control. The
# user name is the `one line' version of the client's X.509 certificate.
# Note that no password is obtained from the user. Every entry in the user
# file needs this password: `xxj31ZMTZzkVA'.
# o ExportCertData:
# This exports two additional environment variables: SSL_CLIENT_CERT and
# SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
# server (always existing) and the client (only existing when client
# authentication is used). This can be used to import the certificates
# into CGI scripts.
# o StdEnvVars:
# This exports the standard SSL/TLS related `SSL_*' environment variables.
# Per default this exportation is switched off for performance reasons,
# because the extraction step is an expensive operation and is usually
# useless for serving static content. So one usually enables the
# exportation for CGI and SSI requests only.
# o StrictRequire:
# This denies access when "SSLRequireSSL" or "SSLRequire" applied even
# under a "Satisfy any" situation, i.e. when it applies access is denied
# and no other module can change it.
# o OptRenegotiate:
# This enables optimized SSL connection renegotiation handling when SSL
# directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<FilesMatch "\.(cgi|shtml|phtml|php)$">
SSLOptions +StdEnvVars
</FilesMatch>
<Directory "/srv/http/cgi-bin">
SSLOptions +StdEnvVars
</Directory>
# SSL Protocol Adjustments:
# The safe and default but still SSL/TLS standard compliant shutdown
# approach is that mod_ssl sends the close notify alert but doesn't wait for
# the close notify alert from client. When you need a different shutdown
# approach you can use one of the following variables:
# o ssl-unclean-shutdown:
# This forces an unclean shutdown when the connection is closed, i.e. no
# SSL close notify alert is sent or allowed to be received. This violates
# the SSL/TLS standard but is needed for some brain-dead browsers. Use
# this when you receive I/O errors because of the standard approach where
# mod_ssl sends the close notify alert.
# o ssl-accurate-shutdown:
# This forces an accurate shutdown when the connection is closed, i.e. a
# SSL close notify alert is send and mod_ssl waits for the close notify
# alert of the client. This is 100% SSL/TLS standard compliant, but in
# practice often causes hanging connections with brain-dead browsers. Use
# this only for browsers where you know that their SSL implementation
# works correctly.
# Notice: Most problems of broken clients are also related to the HTTP
# keep-alive facility, so you usually additionally want to disable
# keep-alive for those clients, too. Use variable "nokeepalive" for this.
# Similarly, one has to force some clients to use HTTP/1.0 to workaround
# their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
# "force-response-1.0" for this.
BrowserMatch "MSIE [2-5]" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
# Per-Server Logging:
# The home of a custom SSL log file. Use this when you want a
# compact non-error SSL logfile on a virtual host basis.
CustomLog "/var/log/httpd/ssl_request_log" \
"%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
#SSLSessionTimeout 5m
Timeout 600000
<Location />
DAV svn
SVNParentPath /mnt/sda1/svn/repos
AuthzSVNAccessFile /home/svn/.svn-policy-file
AuthName "SVN Repositories"
AuthType Basic
AuthUserFile /home/svn/.svn-auth-file
# Satisfy Any
Require valid-user
</Location>
</VirtualHost>
httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
Timeout 60000
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#nach fehlermeldung
LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#Felhermeldung undefined symbols
LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#nach Fehlermeldung
LoadModule cache_socache_module modules/mod_cache_socache.so
#nochne Fehlermeldung
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#Fuer die cipher suite
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#1 for svn
LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#2 for svn
LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#3 for svn
LoadModule dav_svn_module modules/mod_dav_svn.so
LoadModule authz_svn_module modules/mod_authz_svn.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/mnt/sda1"
#<Directory "/mnt/sda1/svn/repos">
# # Possible values for the Options directive are "None", "All",
# # or any combination of:
# # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# # Note that "MultiViews" must be named *explicitly* --- "Options All"#
# # doesn't give it to you.
# # The Options directive is both complicated and important. Please see
# # http://httpd.apache.org/docs/2.4/mod/core.html#options
# # for more information.#
# Options Indexes FollowSymLinks
# # AllowOverride controls what directives may be placed in .htaccess files.
# # It can be "All", "None", or any combination of the keywords:
# # AllowOverride FileInfo AuthConfig Limit
# AllowOverride None
# # Controls who can get stuff from this server.
# Require all granted
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include /etc/httpd/conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Edit: inserted tl;dr
Last edited by arch_on_pi (2014-05-18 21:33:24)

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

SSRS Timeout issue

I am using SSRS for generate reports in my .net web application. For one of the report, an error "An error has occurred during report processing." is returned after 100s. The report can be generated successfully in report server
at around 3 minutes. So, I believed it is caused by timeout issue in one of the processes. However, i have verified the timeout settings but still got no ideas on how to fix it.
My code is a bit complicated since the connection type of my report's data source is an customized dll. In the dll, i will call an webservice to get data. Below is summary for the flow:
UI -> Reporting Service -> Customized Dll -> Web service -> SQL/Stored Procedures
The execution timeount in the web.config of both the reporting service and web service are set to 9000s (<httpRuntime executionTimeout = "9000" />). And coding about timeout of the service is set to 3000s (i.e. ReportingService rs = new ReportingService();
rs.timeout = 3000000;). In the execution properties of the report, Report Execution Time is set to "Do not timeout report execution" currently.
I think there is no problem for the customized dll and the web service it calls since it can be generated in report server direclty. But I have no idea about where the timeout occurs. Please kindly help.
Thanks,
Shirley

Hi Shirley,
According to your description, you encountered time out issue when rendering your report in your web application. Right?
In Reporting Services, we have report execution timeout value and query timeout value for processing report and dataset. In this scenario, you have already set the report executionTimeout and "Do not timeout report execution" on report level. Since
this time issue only happens on specific report, it probably cause by processing large amount of data which exceeds the max query timeout. Please go to rsreportserver.config file and change the QueryTimeOut into "0". This file locates at
xx:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportServer
<Add Key="DatabaseQueryTimeout" Value="0"/>
Reference:
Setting Time-out Values for Report and Shared Dataset Processing (SSRS)
Troubleshooting Timeout errors in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

No Option To Install SNMP Service on Windows Server 2012 Standard

Hi,
was wondering if someone could help me with the below issue.
i am trying to install the SNMP service on our new 2012 server however the role doesn't even exist?
could someone advice on how we can install this role? i have looked everywhere but am unable to find an answer
thanking all in advance

the snmp role is being depreciated and replaced by CIM.
but you should still be able to add it.
its a feature - from server manager select install roles and features, click through the roles till you get to the features page and select snmp from the list
Regards,
Denis Cooper
MCITP EA - MCT
Help keep the forums tidy, if this has helped please mark it as an answer
My Blog
LinkedIn:

Need solution for SNMP Service on Solaris

Hi Friends,
We use the solaris servers. For SNMP we have changed the Default Password of SNMP Service.
We audited our Servers doing the Penetration Testing (PT). In this activity it was reported the SNMP is using the default password. They had the tool "Getif" for SNMP testing. If the default password are set for SNMP service this toll reads the important information. If defaults passwords are not used it cannot read any information about SNMP.
When i change the default password for SNMP, should i restart the the service to take changes in effect?
Pls help

Hi taher;
Thanx buddy. You are really helping us out. I just try to share my knowledge wiht forums user i also already learn many thing from forums,as specialy Hussein Sawwan
I have two more doubts. Like in linux we use which command to see if that executable is in the PATH but in Solaris 10 is whence a replacement for that.I belive You can use which command in solaris too.
Q2). I dont think i need to go for split architecture as both the DB (11i) and application tier are certified for solaris *10* SPARC (64-bit).You should decide it not me :) you can use split config if your business need it or not. Its just depend your analysis
I hope; my answer would be answer of your quesition and give you some idea about your issue :)
Regard
Helios

Dump Core on Service Timeout

Hello,
is there a way to configure Tuxedo such that it dumps a core on a service
timeout?
Once in a blue moon we experienc a service timeout on a large production
system. Unfortunately we would need to turn on a massive amount of logging
to determine where exactly the process gets stuck. It would be so much
simpler if the affected process would core when it is killed.
What signal is the BBL sending?
Could we change the signal handler for that signal (without causing other
problems)?
Thanks...
Roger

Hi Roger,
By default the signal sent by BBL is SIGKILL. However, if environment
variable "TM_SVCTIMEOUT_SIGTERM" is set for BBL, it will try to send SIGTERM
first. So you can catch SIGTERM in your server and then issue an abort()
which will generate a core file.
Regards,
-Hunter
"Roger Fischer" <[email protected]> wrote in message
news:[email protected]..
Hello,
is there a way to configure Tuxedo such that it dumps a core on a service
timeout?
Once in a blue moon we experienc a service timeout on a large production
system. Unfortunately we would need to turn on a massive amount of logging
to determine where exactly the process gets stuck. It would be so much
simpler if the affected process would core when it is killed.
What signal is the BBL sending?
Could we change the signal handler for that signal (without causing other
problems)?
Thanks...
Roger

Missing agent, trap,security tabs in snmp service tab!

Missing agent, trap,security tabs in snmp service tab after installing snmp from powershell script!!
I run the script on win server 2008 and 2012
Could someone help..
Thanks for the help in advance
Ashwini

Hi Ashwini,
To install the snmp service, please refer to the script below:
#Import ServerManger Module
Import-Module ServerManager
#Check If SNMP Services Are Already Installed
$check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
If ($check.Installed -ne "True") {
#Install/Enable SNMP Services
Add-WindowsFeature SNMP-Services | Out-Null
After installing this service, please try to reboot if you can, and check the tabs, a similar dscussion is for your reference:
How to configure SNMP on Windows 2008 Server
If there is anything else regarding this issue, pease feel free to post back.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Timeout issues in synchronous webservices

Hi Everybody,
I am working on a synchronous webservice Interface in which sender is a Webservice and receiver is BAPI (RFC) and I need to handle the time out issue when i dont get the response from the receiver SAP system.Also need to raise an alert.
Can anybody help me out on this.
Helpful answers will be rewarded points.
Regards,
RK

Hi,
For the timeout issue look at these:
Web Service Timeout Configuration
SOAP adapter - Module options...
For the alert I think you should take a look at these:
Does XI support standard SOAP Fault exceptions?
SOAP Fault message (***)
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI
Hope it helps.
Best Regards,
Arman
(Please mark your question as answered when it is solved)

Windows Service Timeout

I've got an application that we are having issues with it timing out and so I need to extend the default timeout period. I believe the default timeout is 30 seconds.
The only info I could find on increasing the services timeout is for 2008 R2 and previous OS. I tried creating a DWord value of
ServicesPipeTimeout and setting the Decial entry of 120000 but the TimeOut still occurs after 30 seconds.
http://support.microsoft.com/kb/922918
How do you extend the a Windows Service timeout past 30 seconds on a 2012 R2 64 bit server?
Lossless Audio Addict

Hi,
Sorry for the delay reply.
So did you receive the event 7009 in event viewer?
If yes, I suggest you may refer to this article and try again to check the result:
https://technet.microsoft.com/en-us/library/cc756342(v=ws.10).aspx
Caution: Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you should back up any valued data.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Group Policy for configuring SNMP service

HI,
I want to configure SNMP service on HP Physical server for communicating with HP SIM server through GPO as need to congifure it on 100 servers.
Though I have configure a policy but its not working.
When I configured manually on HP Physical server its working fine but when I tried to implement through GPO, SNMP stops responding to SNMP requests.
I need a working GPO.
-- Sandeep Gupta

Hi Sandeep Gupta,
Based on my understanding, there were something wrong when you configured the SNMP service via GPO. As Martin said, please provide us the policy you configured to get more help. In addition, please also tell us your OS information.
I would like to introduce you some knowledge on SNMP settings:
Based on my experience and research, the
SNMP settings (including permissions) are stored in the following registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP
Therefore, we can configure a sample computer and then propagate the registry settings to other computers via scripts. Note that, the default ADM file can only
be used to configure "Read only" settings.
Regards,
Lany Zhang

ABAP Query Code timeout issue

Hi,
I have a SAP query which was the following code which is causing a timeout issue when running the report, can anyone suggest how I can change the code to make it more efficent?
* This gets the sum of all labour costs on WBSEs.
clear X_COEP_WKGBTR_LAB_W.
if PRPS-OBJNR is not initial.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR.
endif.
thanks
Joe

Hi Joe,
I see none of the Key fields were used in select query.
Create a secondary index for the table and use it in select query.
It increases the performance.
COEP~1 and COEP~2 are already existing.
select sum( WKGBTR ) from COEP
    into X_COEP_WKGBTR_LAB_W
    where
    PERIO = ZPERIODT
    and
    GJAHR = ZYEAR
    and
    KSTAR >= 'A43'
    and
    KSTAR =< 'A43ZZZZZZZ'
    OR
     KSTAR = '0005767012'
    and
    OBJNR = PRPS-OBJNR
%_HINTS ORACLE 'INDEX("COEP" "COEP~1").
Thanks,
Anil

SNMP Service not listed in messaging server Conf Console

HI
We are running Messaging Server in Windows NT, in the Messaging server Configuration Console SNMP service is not getting listed.
Please help in finding out what i am missing, but SMTP service is ruuning mail delivery is working Fine

Sorry I am not getting SMTP Service in Conf Console please help me

Powershell - SNMP Service Install (Server 2008)

Hello, so this is a follow up to the assistance that was provided to me yesterday about checking to see if the SNMP service was installed across multiple servers. I was able to gather a list of devices that require the SNMP service to be installed,
and (thankfully) most of them are Server 2008 machines. The pre-2008 machines I will just hit manually, since there are less than 20 of them, and to minimize confusion, and a lack of powershell knowledge from my side.
I have approximately 120 servers that will require the service to be installed onto them, and was looking to do this via powershell. Luckily, I was able to find this great script online, and I have tested it with my own variables inserted, and it works
great (for one server, ran manually on it). I was wondering if somebody could help me figure out how to get the script to do the following two things:
1. Install the SNMP service to multiple servers from a text file (I attempted this with the get-content).
2. Output the results to either a text file or a csv file (also tried this as can be seen below).
Here is the script, with what I tried (and failed). The only two lines of code that are mine, are the very top one and the very bottom one, I will bold them to indicate that. Thanks for any help that may be offered.
    #Powershell Script To Install SNMP Services (SNMP Service, SNMP WMI Provider)
   Get-Content .\servers.txt
    #Variables :)
    $pmanagers = "MY VARIABLE 1"
   $commstring = "MY VARIABLE 2"
    #Import ServerManger Module
    Import-Module ServerManager
    #Check If SNMP Services Are Already Installed
    $check = Get-WindowsFeature | Where-Object {$_.Name -eq "SNMP-Services"}
    If ($check.Installed -ne "True") {
            #Install/Enable SNMP Services
            Add-WindowsFeature SNMP-Services | Out-Null
    ##Verify Windows Servcies Are Enabled
    If ($check.Installed -eq "True"){
            #Set SNMP Permitted Manager(s) ** WARNING : This will over write current settings **
            reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v 1 /f /t REG_SZ /d localhost | Out-Null
            #Used as counter for incremting permitted managers
            $i = 2
            Foreach ($manager in $pmanagers){
                    reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\PermittedManagers" /v $i /f /t REG_SZ /d $manager | Out-Null
                    $i++
            #Set SNMP Community String(s)- *Read Only*
            Foreach ( $string in $commstring){
                    reg add "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\SNMP\Parameters\ValidCommunities" /v $string /f /t REG_DWORD /d 4 | Out-Null
    Else {Write-Host "Error: SNMP Services Not Installed"}
| Export-Csv .\SNMP_Install.csv -NoTypeInformation

here is what the GP settings looks like:
SNMP Service
Data collected on: 3/20/2014 10:58:08 AM
General
Details
Domain
TESTNET.local
Owner
TESTNET\Domain Admins
Created
3/20/2014 10:53:20 AM
Modified
3/20/2014 10:57:54 AM
User Revisions
0 (AD), 0 (sysvol)
Computer Revisions
3 (AD), 3 (sysvol)
Unique ID
{8B82351A-5BF0-47F7-8549-71C2D592FF72}
GPO Status
Enabled
Links
Location
Enforced
Link Status
Path
None
This list only includes links in the domain of the GPO.
Security Filtering
The settings in this GPO can only apply to the following groups, users, and computers:
Name
NT AUTHORITY\Authenticated Users
Delegation
These groups and users have the specified permission for this GPO
Name
Allowed Permissions
Inherited
KAHLNET\Domain Admins
Edit settings, delete, modify security
No
KAHLNET\Enterprise Admins
Edit settings, delete, modify security
No
NT AUTHORITY\Authenticated Users
Read (from Security Filtering)
No
NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS
Read
No
NT AUTHORITY\SYSTEM
Edit settings, delete, modify security
No
Computer Configuration (Enabled)
Policies
Administrative Templates
Policy definitions (ADMX files) retrieved from the local machine.
Network/SNMP
Policy
Setting
Comment
Communities
Enabled
Communities
public
Policy
Setting
Comment
Permitted Managers
Enabled
Permitted Managers
BUILTIN\Administrators
Policy
Setting
Comment
Traps for public community
Enabled
Trap configuration
test-trap-1
User Configuration (Enabled)
No settings defined.
¯\_(ツ)_/¯

SQL server Timeout issue in data insertion

We are loading data from DB2 database to SQL server using Data flow task. During data insertion in SQL server, we are receiving the below error.
"An exception has occurred during data insertion, the message returned from the provider is: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Kindly help to resolve this issue.
Thanks!!!

Check the connection timeout property of the source connection.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a5571966-b14e-45c6-9ce8-4f5651d3ee00/ado-net-destination-timeout-issue?forum=sqlintegrationservices
Regards, RSingh

SNMP service on IPCC

Hi,
I want to enable snmp service on our IPCC environment; ICM 7.2, CVP 7.0. Need guide from anyone that has done that before.
Regards,
Nnamdi

Gee, you don't have to do much.
Installing one of the service releases (can't recall which one, but certainly 7.2(7)) disables the Windows SNMP service and installs the Cisco version of the SNMP service which it then starts.
Then you use the mmc snap-in to configure it as described in the "SNMP Guide for Cisco ICM/IPCC Enterprise" Release 7.0(0) July 2005. It's all there - what can't you follow?
Regards,
Geoff

SNMP Service Timeout Issue

Similar Messages

Maybe you are looking for