So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

So I just updated my MacBook Pro and installed the new version of iPhoto and rebooted it and now there is a logo of the world blinking on my screen and it will not go away please help

You can force quit by holding the power button down for extended period.
During boot up hold down the Option key and choose your Macintosh HD OSX.
In >System Preferences> Startup Disk>choose your internal OSX System as Default.

Similar Messages

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • I just updated my macbook pro and now every time i go to youtube it tells me I have to download the new version of adobe flash player so i do and it still wont let me play it ..

    I just updated my macbook pro and now every time i go to youtube it tells me I have to download the new version of adobe flash player so i do and it still wont let me play it ..

    Assuming Allan's advice is not correct, and you do run the installer, I think I've heard of that problem and it involves removing the old Flash plug-ins, then install the new version. I don't use it so I don't know what they are called, but will be the /Library/Internet Plug-ins folder.
    You can go here and enable HTML5 in YouTube so you don't have to use Flash: http://www.youtube.com/html5
    Most(?) of the content is HTML5, but you may run into videos where you still need Flash.

  • I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

    I just updated my MacBook Pro and it's been installing n restarting more than an hr now .....what do I do now?

    I Did my usual software updates and it downloaded n asked me to restart so I did, and now it's not starting up

  • I just purchased a new Macbook Pro and netflix will not play on it. anyone else have similar problems?

    I just purchased a Macbook Pro. When I sign into Netflix and open a movie I get a Digital Rights Management Error (error N8151) screen. restarting the browser does not solve the problem.

    Shootist007 It has to do with the first reply to the OP's question, and Joseph Albanese2, that referenced article has to do with "hackintosh's".  scratch66 - what web browser are you using?

  • I bought a new macbook pro and iTunes will not let me purchase anything. All computers unregistered. This computer is registered. Cannot purchase anything using my apple id and my apple id works because i buy things on my i phone. What is the problem

    I bought a new macbook pro and now every time i try to buy anything with my apple id it doesn't go through. I tried Ibooks and iTunes but neither one will work. I have registered this computer and even tried unregistering all the other computers but that did not do anything. I also checked my form of payment and that is not the problem either because i have no problems what so ever buying anything on my iPhone or my desktop computer.
    It is just this computer.
    I try to buy something and something pops up and says... "We could not complete your iTunes Store request. An unknown error occurred (-45054). There was an error in the iTunes store. Please try again later."
    And i have been trying later for 2days now.

    Have you tried repairing disk permissions : iTunes download error -45054

  • HT4623 I just updated my daughters 3GS and it will not activate for me.

    Hi I am in desperate need of help I just updated the software on my daughters 3GS and it will not activate no matter what I do.
    i would appreciate any help, thank you.

    You can not update an iPod Touch 3rd Generation to iOS 6.
    Only iPod Touch 4th generation can update to iOS 6.
    iPod Touch 5th Generation will come with iOS 6 already installed.
    Check this page out:
    http://www.apple.com/ios/whats-new scroll to bottom of page to "iOS 6 is compatible with."
    You will have to place your device into recovery mode and set up as new.
    Follow this article for assistance:
    http://support.apple.com/kb/HT1808
    Hope this helps.

  • HT4557 My MacBook Pro and iPad will not pick up the Air Play or the Home sharing on my AppleTV which was working yesterday

    I was previously able to use my AppleTV with airplay and iTunes home sharing to my 2 macbook pros and my iPad. However, it has suddenly stopped connecting to both airplay and home sharing, even though both are turned on and the correct itunes account has been logged into on all devices. We have reset AppleTV but that has not resolved the issue. There is no airplay icon on any of the macbooks or iPad. Has anyone else experienced this and found any solutions? Thanks.

    It has always been set up as WiFi and until this weekend it worked well - now won't connect.

  • I have a new Macbook Pro and it will not

    I have a new macbook pro, and I recently tried to reboot from my Leopard Install DVD. Everytime it starts up I get he freezing process screen and have to hold the start button to restart the system. I cannot fix the hard drive because the computer won't boot up.
    Do I have to buy Disk Warrior again?
    Thanks

    I am using the Snow Leopard DVD to try to boot up. It crashs with the screen I told you about. I tried using the option key and it shows the DVD, but once I select it, it starts to boot and then crashes. Is this a problem because I have upgraded my os from the Apple update icon?
    Thanks

  • Firefox crashed and will not restart. I have even removed the program and downloaded Firefox again and it will not restart. Please help!

    I normally use Firefox as my web browser. when I tried to use it, a message appeared that said it had crashed and would restart. I have tried numerous times to restart Firefox and it will not restart. I have even removed the program and downloaded Firefox and it still will not start. Do I have a virus or bug in my computer preventing Firefox from starting?

    I can access Firefox using the safe mode, which sucks, but I can not get into my profile. I can not access u6krt2kl my string is mlm303va.default

  • I just purchased a MacBook Pro and I can not use my Clear broadband.

    I just purchased a Mac pro book and I can not use my Clear broadband. A message pops up saying the operating system is running in 64 bit mode . Please switch to 32 bit mode.  How do I swich the mode and will this cause problems. There must be other MacBook Pro operators that use Clear broadband as their internet connection.

    Never heard of them but I Googled and took a look. Seems as if they offer either a USB modem or a 'home' modem - which do you have?
    If you're on a newer Mac (and I see that you are) and running Mountain Lion you cannot start up in a 32-bit kernel. I'm not sure if thise is directly related to the question, actually, as some applications will actually let you 'open' in 32-bit mode. If you're using an application that runs the modem software, try selecting it and doing a "Get Info" (Command-I) from the Finder and see if there is an option to "Open in 32-bit mode".
    Good luck,
    Clinton

  • Just updated my iPhone 5s and it will not turn on now

    I have just updated my iPhones 5s with las test update ios 7.0.5 and my phone will not turn on one now please help

    Do a reset, hold down the home/sleep button together until you see the apple logo and then release.

  • I just updated my ipod touch, and it will not work now.

    I just updated my ipod touch... i think its 3g... to the newest thing, and now i reset my ipod and it just goes to a bluish green screen and won't turn off, or do anything but reset. when i reset it it goes to the apple logo and then right back to the blue screen. What can i do?! also, it won't connect to my computer.

    You can not update an iPod Touch 3rd Generation to iOS 6.
    Only iPod Touch 4th generation can update to iOS 6.
    iPod Touch 5th Generation will come with iOS 6 already installed.
    Check this page out:
    http://www.apple.com/ios/whats-new scroll to bottom of page to "iOS 6 is compatible with."
    You will have to place your device into recovery mode and set up as new.
    Follow this article for assistance:
    http://support.apple.com/kb/HT1808
    Hope this helps.

  • Just updated I-Phone 4 and volume will not work

    Just updated I-Phone 4 to OS6 now my volume will not work.

    Firefox 4 requires at least OS X 10.5 and an Intel Mac.
    * http://www.mozilla.com/firefox/4.0/system-requirements/
    For an unofficial Firefox 4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
    * http://www.floodgap.com/software/tenfourfox/
    Firefox 3.6.x (Mac OS X 10.4 and later) can be found here:
    * http://www.mozilla.com/en-US/firefox/all-older.html
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    * http://kb.mozillazine.org/Lost_bookmarks

  • My macbook pro and iphone will not connect to the internet

    For three days my macbook and Iiphone have not been able to connect to the internet.The macbook says the wifi is connected with a green light, but when I open google chrome and attempt to go on any website it says "This webpage is not available." I have tried everything including restarting the computer, restarting the router/modem and deleting/re-adding wifi to the networks list. the iphone says that the internet is connected but when I go to use an app like FAcebook it says that there is a network error. I have even called our service provider about this. The imac in our home has no problem connecting to the internet. Any ideas on what is going on?

    Run the Network Diagnostics assistant. How far do you get?

Maybe you are looking for

  • WIS 10901 error while running WEBI Report but no error in the DESKI report

    Hi, Can anyone please help me to resolve this issue. we have recently migrated BOXIR2 - BOXI3.1. many of the reports are from SQL Server and Oracle databases. Oracle Database connection universe reports error: i'm getting WIS 10901 error while runnin

  • BEx queries in BI 7.0

    Hello We have installed BI 7.0. When i try to view query in BEx, i get a message <b><i>No authorizations</i></b>.... In BI side i have assigned <b><i>SAP_ALL</i></b> and <b><i>SAP_NEW</i></b> profiles. Could anybody give me advice? Thanks in advance

  • How can I launch configurator from host application in a specefic language.

    Hi, I want to access R12 configurator from a host application and I have no problems accessing it. But I want that the configurator should Launch in Japanese Language. Can I specify any XML parameter to the UIServlet to achieve this or is there any o

  • Need programs from R/3 500 !!! Help!!

    Hi all, I made a mistake nad imported standard programs from R/3 4.7 to R/3 5.0 Now there are syntax problem and I cannot activate it. Does someone work on R/3 SAP_APP 500 SP9? (Support Package it's not important) And can send me copy af programs: MV

  • Field not validated from ABAP dictionary

    HI , I have created ALV using OOP. . I implemented  F4 functionality on the field AUFNR on output . for validation on AUFNR i passed ref field(aufnr) and ref tab(aufk) in field catalog but still it is not validating . field catalog : i_fieldcat_line-