SOAP Scenario-Sender and receiver having same structure- Mapping Required?

Hi,
We are having a SOAP to SOAP scenario. In that the sender and receiver are having same structure. Is it possible to by-pass mapping and just do the configuration from ID
Thanks and regards,
Siji Anup

Hi Siji,
AFAIK you can skip ESR development. Check the example in this blog When and how to create an scenario in SAP PI without mapping objects.
Regards.

Similar Messages

Hello! Im having problems about my Iphone showing NO SERVICE on top. Im not able to send and receive msg, same with calls

Hello Guys! I hope someone could help me, Im having trouble with my phone's signal, I am not able to send and receive msgs, same as make calls and receive calls. At first, my phone is working fine (iphone 4, iOS 7.0.4) and all of a sudden, my text messages are not getting through, and I noticed that my phone shows NO SERVICE, I refreshed the phone by turning it off and turning it on after a couple of minutes, it worked. My phone is okay again after that, Im able to send and receive messages again. But after few hours, the problem came again. NO SERVICE sign is displayed again, but this time after refreshing the phone nothing good happened. I tried almost every possible thing I can to fix it but it doesn't work. What should I do.
Thank you

Hey Clara,
These are the recommended troubleshooting steps to resolve No Service issues on iPhone:
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Turn iPhone off and then on again.
Remove the SIM card and verify that it's a valid, carrier-manufactured SIM. Also verify that it isn't damaged, worn, or modified. Then reinsert it.
Check for a carrier-settings update. Connect to a Wi-Fi network. Then tap Settings > General > About. If an update is available, iOS will ask you if you want to install it. If Wi-Fi isn't available, connect your device to iTunes.
Update your iPhone to the latest version of iOS.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. This will reset all network settings, including Bluetooth pairing records, Wi-Fi passwords, VPN, and APN settings.
Restore the iPhone.
If you are outside the United States, please also follow these steps:
Go to Settings > Carrier > Automatic.
If the phone registers any carrier network, Settings > Carrier will be present.
If the Carrier option is missing in Settings and you are outside of the Unites States, please contact Apple for support and service options.
Set the option for Automatic to off.
A list of potentially available carriers appears after about two minutes. If the device is locked to a carrier, it may connect only to the carrier network to which it is locked. If the device displays carrier networks, then the device is working as expected.
Set Settings > Carrier > Automatic back to on.
If you're still experiencing No Service issues, contact your carrier to check for any network or account issues that could cause these symptoms.
from: iPhone: Troubleshooting No Service
http://support.apple.com/kb/TS4429
Welcome to Apple Support Communities!
Take care,
Delgadoh

Proxy to Proxy Scenario with sender and receiver on same instance

Hi,
I have a scenario to integrate Erecruit to HR system usng standard content. Both the Erecruiting and HR are on same instance so my sender and receiver is the same system. Standard ABAP proxies are provided.
Now I need some help in how to configure the channels and the agreements as both the sender and receiver are on same instance. Do i need to use parties?
do i have to create a sender communication channel?
Please let me know the stps required in configuration for this scenario.
Thanks in advance.

Hey
It does not matter if your sender and receiver are same system or different systems,the configuration steps will be the same.
In your case you would need
1 Receiver determination
1 interface determination
1 receiver agreement
1 receiver communication channel(of type XI adapter,this will connect to HR system).
No party or sender communication channel or sender agreement are required.
You need to have configured 1 business system for HR system in SLD though.
Thanx
Aamir
Edited by: Aamir Suhail on Jul 23, 2008 7:36 PM

Can 2 people in different locations at the same time import, access, send, and receive the same messages from the same email account

I import messages into Thunderbird. I send and receive emails. One of the things I like about Thunderbird is that I can insert (image, link, etc) right where I want to, and I can Attach. But not just a simple attach file. No, I can also click Attach and choose Webpage. A lot of web-based emails are plain, simple, no frills - Attach file and that's it.
So I need to have my client be able to do the same thing I do when sending out emails, Namely sending out emails with an Electronic Press Kit (EPK) attached - which is to say, a webpage (not a pdf in our case). So, I need her to download, install, and use Thunderbird.
Here's the problem and my question. She needs to access, send, and receive from my email account. That would be easy if it was simple attach files - she could just login on the web, go to squirrel mail and bang it out.. Here it is: She needs to be able to import the messages to be able to reply to some messages - she needs access to what I have access to. She needs to use Thunderbird so she can take advantage of the features like insert image with link or attaching a webpage. My question is how will this affect my use? Can 2 people simultaneously and from different locations access and use the same email account or is it a case where her importing the emails would cut me off..Is it an either or thing? Basically, can her and I both import the emails or can they only be imported to one location at a time. Because every time someone sends me an email i get it right there on my Thunderbird application..it's imported to my Thunderbird..I want her and I to be able to do that without affecting each other. I don't want her to start importing to her desktop and then I can no longer import. If she says "point those messages to my computer what will happen to my ability to access them on my computer in the same manner I am currently?

I think there is a contradiction in your requirements. You want two people to share an account and you don't want either to interfere with the other.
The short and simple answer is to use IMAP to connect to the mail server. If your current email provider doesn't offer IMAP, find another that does. This is old technology already and it's disgraceful that some email providers haven't yet put it in place.
IMAP means that your messages are stored on the server and both of you will see exactly the same set of messages. And therein lies the contradiction; you will both see changes made by the other so you are inherently interfering with one another.
Caveats: some providers may not permit you both to access the account concurrently, and even if they do, things may become interesting if you both choose to work on the same message simultaneously.
Note that all of this is about email servers and protocols; your choice of Thunderbird as your email client has little bearing on the situation.

Sender and receiver agreement not cerated

Hi .
I am creating configuration scenario in ID by importing the integration scenario which i created in the IR.
I crated communication channel template also and i added it to the integration scenario in connections.
Query 1?
do i have to create Communication channels also.....even After creating communication channel template (because it is not seen the ID below communication channel )
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario (sender and receiver agreements are not getting created automatically)peace tell me what is the reason???.
and how can i resolve this...
thanks
shakif

Hi Mohamed,
Query 1?
do i have to create Communication channels also.....even After creating communication channel template
Yes You have to create as it's just a template that u created in IR. But u can use the same for creating CC.
Check this link for what's the Diff. B/w CCT in IR and CC in ID
Re: Communication Channels
Query 2 ?
once i transfer this integration scenario from IR to ID and cerate the configuration scenario
Yes. it will create automatically.
Just check my posting in Wiki for simple File to IDOC scenario might be u missing something
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
and check my reply in this thread
Re: Doubt in transfering integration scenario from IR
Regards
Sachin

XI3 SOAP sender and Receiver

Hi
I am stuck with a connecting to scenarios using SOAP channel. In short there is one business scenario that based on some conditions must start other scenarios (each one built around one business process). I am trying to send asynchronous SOAP message within the same XI and treat it as a External XI system to start another Business Scenario (using XI adapter does not work as the system discovers the message as being in a loop).
Everything would be fine if there would be 1 target scenarios but I have 1:n. For asyncronous transport I have defined different Message Interfaces to be used for on each case. So XI should determine the right business process based on the message interface that uses the communication channel.
So I have configured a SOAP sender and a receiver channel. As I understood from SOAP adapter FAQ I checked "Use Encoded Headers" and "Use Query String" for both - sender and receiver channel. And ofcourse receiver channel is pointed to http://:/XISOAPAdapter/MessageServlet?channel=:{system name}:{receiver channel name} but when I start the initiating scenario the asyncronous message is sent of but nobody is catching it.
In RWB Message monitoring / adapter engine I found the the message receives an exeception:
SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException -
com.sap.aii.af.mp.module.ModuleException: either no channelID
specified or no channel found for the specified party, service, and channel name,
MessageServlet(Version $Id: //tc/aii/30_REL/src/_adapters
/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) at
com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:427) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl....
runServlet(HttpHandlerImpl.java:401) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl....
handleRequest(HttpHandlerImpl.java:266) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
startServlet(RequestAnalizer.java:387) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
startServlet(RequestAnalizer.java:365) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
invokeWebContainer(RequestAnalizer.java:944) at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at
com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener....
process(ApplicationSessionMessageListener.java:33) at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
java.security.AccessController.doPrivileged(Native Method) at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any ideas... how to make XI to send SOAP messages so that the same XI system would be able to pick them up?
Or what have I done wrong?
Best wishes,
Heiko

hi,
What is the format that u are using for the sender URL....The error message you are getting either because the names that you have mentioned in the sender URL are wrong or the URl format itslef is wrong.....if the format is the one that you have mentioned in the first post then it is not the desired format.
Use the following format to create the URL to send the request:
http://<servernameORserverIPaddress>:<portNumber>/XISOAPAdapter/MessageServlet?channel=:<senderservice>:<snederCCname>&version=3.0&Sender.Service=<senderservice>&Interface=<IRnamespace>%5E<senderMI>
Replace
with
& amp;
(no space inbetween the two words) in the above URL.
How to configure SOAP communication channels (sender and receiver) so that two XI instances could communicate and (more important) use different message interfaces on the same channel?
While creating a Receiver communication channel there is no need to specify the interface name and hence it can be used in different scenarios....however a sender communication needs the sender interface to be specified (as in SAP XI.....not in SAP PI).....so a sender channel can be used in different scenarios but with only the same interface.....
Regards,
Abhishek
Edited by: abhishek salvi on Feb 17, 2009 2:50 PM

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this?

I am having trouble with iMessage being activated. It has worked up until yesterday and now won't activate and is saying no address in the send and receive section. My number is there but not ticked. Any suggestions on how to fix this? I have shut down my phone, but still no luck!

iMessage and FaceTime went down yesterday for some people. Mine is still down. My iMessage is saying the same thing about being activated. Sounds like you are still down too. Ignore the status page that says everything is fine - it lies.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

How to send IP Addr in an alert and receive the same?

1. I have an 'alert handler' process that's sending an alert using 'Create Alert' activity.
2. I have a listening/receiving process that get's triggered by this alert from the 'alert handler' process.
3. The listening/receving process telnet's to a router. I want the listening/receiving process to extract the IP Address of the router from the alert that triggered this listening proecess.
4. I tried sending the IP address of the router as 'Parameter 1' using the 'Create Alert' activity in the 'alert handler' process.
5. In the receiving process, in order to telnet to the router, I chose 'Execute on this target reference' option for the 'Open Terminal' acitivity, but was unable to access 'Paramter 1' of the alert. It shows greyed out.
Question:
What is the best way to send the IP address of the router in the alert and receive the same in the listening process such that I can telnet to that router in the listening process?
Please note: tried creating a 'terminal target'...there is no way for me to supply IP address info from outside into terminal target...looks like terminal target only takes a hard coded IP address or host name.
Will appreciate your prompt response please.
thanks,
Jamal

We discussed this, but just to post here. To view alert or other tasks parameters via the reference variable fields you have to select the show advanced checkbox.

TS2755 Me and my wife r sharing the same Apple ID, with the conversion IOS7 all of a sudden my wife can read all my sended and received iMessages! What t.f is going on? I tried all kind of things, pls help

Gentlemen,
Me and my wife r sharing the same Apple ID, with the conversion to IOS7 all of the sended and received iMessages on my phone comes in also on my wife's phone! Tried all kind of things, pls help
Marco

Are you both using the same Apple ID?
What do you have here:
Settings > Phone > My Number > ?

Sender and receiver on the same server

Good morning!
We plan a TDTIM for 2 different SIDs but with their Oracle DBs on the same server (NOT MCOD).
If we use them as the sender and receiver respectively, any concern about the performance?
Any other concerns?
We know that TDMS within the same SID but different clients is NOT recommended.
Our TDMS server is on a seperated box.
Thanks for sharing your experience.

As the hardware resources will be shared, you need to make sure -
> the box has optimum resources to handle large data transfer volume.
> the system and DB parameters are set correctly. There is a note to suggest these setting for high volume data transfer.
> avoid two data intensive steps to run in parallel, for example do not run receiver deletion and data selection in parallel.

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up?

My messages are not going through or coming in from other iOS devices. Having to send and receive in SMS. What is up? Anyone else having these issues?

There's an article that Apple has acknowledged this issue. They recommend turning off imessages, reset all settings and then reactivate imessages.
If that doesn't work, you may just have to wait until they release an update, which should be pretty soon.

Question about Sender and Receiver Structure for JDBC

Dear All,
I want to know why there is a fixed format for sender and receiver structure for JDBC. why cant we use the structure like what we want? explain me in detail.
Thanks

Good Question:
We have to create our data structure based on the existing database table structure. While reading or writing , JDBC adapter convert our data type structure in to SQL Query Statements that matches Table structure.

Can IDoc sender and receive system be the same client?

thanks.
I think one client can't assign to two logical system.so?

Can IDoc sender and receive system be the same client?
yes
Regards,
Prateek

How can we send and receive voice in same program

Please can any one suggest me how to send and receive voice in the same program. I want both AVTransmit & AVReceive in the same program i tried it but its too difficult to do it.. Any one has got that code? And also i want my program to know if any third person is wanting to call me.. I mean how to recognise a new call. Please relpy to the following mail id.. Please i need it urgently..
[email protected]

Sir please execute this code.
printf("I need it ");
for(i=0;i<=infinity;i++)
printf("V E R Y ");
printf("U r g e n t");
Now Please Send it to me sir.Please..Does not compile!

SOAP Scenario-Sender and receiver having same structure- Mapping Required?

Similar Messages

Maybe you are looking for