SOAP sender and IDOC receiver

hi
Could u please help me, how to do this interface.
I am transferring the PO from legacy system(webServices Request) to SAP system when ever PO_IDOC is created in SAP I need to send PO number and Acknowledge back to the legacy system.This is synchronous communication from SOAP to IDOC.

you can use the ORDRSP ORDERS05 Idoc for PO response.
So your scenario will be
SOAP Req -> IDoc -> IDoc resp -> SOAP Resp
but if you can have a standard RFC or maybe an ABAP proxy you can make the scenario sync from SAP end.

Similar Messages

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

XI3 SOAP sender and Receiver

Hi
I am stuck with a connecting to scenarios using SOAP channel. In short there is one business scenario that based on some conditions must start other scenarios (each one built around one business process). I am trying to send asynchronous SOAP message within the same XI and treat it as a External XI system to start another Business Scenario (using XI adapter does not work as the system discovers the message as being in a loop).
Everything would be fine if there would be 1 target scenarios but I have 1:n. For asyncronous transport I have defined different Message Interfaces to be used for on each case. So XI should determine the right business process based on the message interface that uses the communication channel.
So I have configured a SOAP sender and a receiver channel. As I understood from SOAP adapter FAQ I checked "Use Encoded Headers" and "Use Query String" for both - sender and receiver channel. And ofcourse receiver channel is pointed to http://:/XISOAPAdapter/MessageServlet?channel=:{system name}:{receiver channel name} but when I start the initiating scenario the asyncronous message is sent of but nobody is catching it.
In RWB Message monitoring / adapter engine I found the the message receives an exeception:
SOAP: response message contains an error XIServer/UNKNOWN/ModuleUnknownException -
com.sap.aii.af.mp.module.ModuleException: either no channelID
specified or no channel found for the specified party, service, and channel name,
MessageServlet(Version $Id: //tc/aii/30_REL/src/_adapters
/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) at
com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:427) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:760) at
javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl....
runServlet(HttpHandlerImpl.java:401) at
com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl....
handleRequest(HttpHandlerImpl.java:266) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
startServlet(RequestAnalizer.java:387) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
startServlet(RequestAnalizer.java:365) at
com.sap.engine.services.httpserver.server.RequestAnalizer....
invokeWebContainer(RequestAnalizer.java:944) at
com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at
com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at
com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at
com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener....
process(ApplicationSessionMessageListener.java:33) at
com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at
com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at
java.security.AccessController.doPrivileged(Native Method) at
com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at
com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Any ideas... how to make XI to send SOAP messages so that the same XI system would be able to pick them up?
Or what have I done wrong?
Best wishes,
Heiko

hi,
What is the format that u are using for the sender URL....The error message you are getting either because the names that you have mentioned in the sender URL are wrong or the URl format itslef is wrong.....if the format is the one that you have mentioned in the first post then it is not the desired format.
Use the following format to create the URL to send the request:
http://<servernameORserverIPaddress>:<portNumber>/XISOAPAdapter/MessageServlet?channel=:<senderservice>:<snederCCname>&version=3.0&Sender.Service=<senderservice>&Interface=<IRnamespace>%5E<senderMI>
Replace
with
& amp;
(no space inbetween the two words) in the above URL.
How to configure SOAP communication channels (sender and receiver) so that two XI instances could communicate and (more important) use different message interfaces on the same channel?
While creating a Receiver communication channel there is no need to specify the interface name and hence it can be used in different scenarios....however a sender communication needs the sender interface to be specified (as in SAP XI.....not in SAP PI).....so a sender channel can be used in different scenarios but with only the same interface.....
Regards,
Abhishek
Edited by: abhishek salvi on Feb 17, 2009 2:50 PM

Soap Sender and RFC Adapter receiver getting APPLICATION_ERROR

Hi, all,
I have a webservice soap sender and RFC Adapter receiver scenario, it works fine with RFC "RFC_SYSTEM_INFO", When i tried the RFC "RFC_READ_TABLE", getting the following error message, <SAP:Code area="RFC_ADAPTER">APPLICATION_ERROR</SAP:Code> in
SXI_MONITOR, in webservice client, i am getting error message like this:
<faultcode>SOAP:Server</faultcode>
         <faultstring>Server Error</faultstring>
         <detail>
            <rfc:ZZTEST_RFC_READ_TABLE.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions">
               <Name>TABLE_NOT_AVAILABLE</Name>
               <Text>QUERY_TABLE not active in Dictionary</Text>
            </rfc:ZZTEST_RFC_READ_TABLE.Exception>
Thanks a lot!

Hi
Its not compulsory but its good to wrap it as Z object.
Well if you are facing problem with SOAP data. Then try to do one thing. Check with the data you received from SOAP message. If this works
Then try to check in mapping is it passing the data correctly or not. With this check with the user authorization PIAPPLUSER. if its having less authorizations to execute this BAPI in ECC
Thanks
Gaurav

Mapping between Sync sender and Async Receiver

Hi Experts,
How to do mapping between Sync sender and Async Receiver?
Flow: Sync SOAP Sender Client -> First Async webservice call -> Second Sync webservice call
1. I have to send some input/request details to first webservice call. It will just update the database.If I do mapping with SOAP Sender client and first Async webservice.. I am getting timeout, because it expects response mapping too.
2. Only Second webservice call return the response back to SOAP Sender client.Here mapping between SOAP Sender client and Second Sync webservice call. I don't have any problem here.
I have to pass the same request info to both webservice calls, Please tell me how to do the async mapping in BPM?
Regards
Sara

Hello Sara,
Hope these blogs are useful to you..
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in
ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in
ccBPM
Thanks,
Satya Kumar

One sender and two receiver

Hi All,
I have a scenario in which there is only one outbound Message interface and 2 inbound message interfaces ( one sender and two receiver). In XI, how can i configure the interface determination for this? Shall i need to put * for receiver and add 2 inbound message interfaces and interface mappings.
Thanks
Michael

Use xpath in your interface determination in case you have some conditions, else u can *** multiple interfaces in your int. det.. also ref:
/people/suraj.sr/blog/2006/01/05/multiple-inbound-interfaces-within-a-service

Integrtion Scenario using BPM with two sender and multiple receiver

integrtion Scenario using BPM with two sender and multiple receiver
How many Application Components are required?

Hi Vinod,
1) In integration repository you can have one or many software components it depends on your landscape orchestration
2) In integration direcory you need at least one service for bpm and one or many for each system in your bpm
also each connection between systems and bpm must have receiver determination and so on.
Advice: Please treat BPM as a separate system.
best,
Wojciech

RFC Sender and RFC Receiver Sync Scenario . Help required.

Hi,
I need to make RFC Sender and RFC Receiver Sync Scenario.
Any docs/links for it.
Regards

Hi,
I have CRM (r/3) and DM (r/3)system.
Data from differnent tables of CRM system needs to go to
DM system different tables , data will be saved there and then return response back to CRM system.
For this I have given one RFC for CRM system
For this I have given one RFC for DM system
So I have to make Sync Outbound Interface
and Sync Inbound Interface.
So I think so no BPM is required.I am correct?
Adapter -- RFC Sender and RFC Receiver Adapter.
Regards
Edited by: Henry H on Jan 29, 2008 11:20 AM

My sender and the receiver message types structures are same.do I need to m

Hi all,
My sender and the receiver message types structures are same.do I need to mapping in this case.
If it is not required .Let me know in detail,How to proceed.
Thanks,
Srinivasa

Hi,
If is just to pass the message (as the sender source is the same as the receiver source),
first you should have the Message Interface of you message
then you should configure the Receiver determination, as the sender interface use your message interface and in the interface determination you can use the same message interface (same name). You dont have to add any mapping, just let empty and save. Just use one message interface for sender a receive.
Any questins let me know.
Regards,
Lpbuff

Example on SOAP sender and receiver ...With all Screen shots PL...

Hi Experts
    I want to work on SOAP scenarios (Where soap as sender as well receiver)
    Can any one help me... with example screen shots on this ...
    Pls...provide me end to end (I am very new to SOAP)
    like Soap 2 Rfc, Rfc 2 Soap...etc any examples with full details
    And one more thing is " In general when we will go for SOAP specific scenario's
    What are the real advantages ?
Adv...thanx and points to ALL
Rakesh B

Rakesh,
Look into these how to guides,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/befdeb90-0201-0010-059b-f222711d10c0">How to Set Up a Web Service-Related Scenario with SAP XI</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d23cbe11-0d01-0010-5287-873a22024f79">How to Use SOAP Adapter</a>
Blogs~
<a href="/people/shabarish.vijayakumar/blog/2006/03/28/rfc--xi--webservice--a-complete-walkthrough-part-2">RFC -> XI -> WebService - A Complete Walkthrough (Part 2)</a>
<a href="/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009">Troubleshooting - RFC and SOAP scenarios</a>
SOAP allows you to call webservices from XI and also expose your Interface as a webserivce. This way, you leverage and use all advantages of webservices.!
Real Time scenarios invove cases when you have a vendor who have exposed / provide a set of webservices which your organization would like to use.
Regards
Bhavesh
PS :Search on SDN. You will find answers and blogs for the same questions. By searching you are digging yourself and thereby you get to understand things better.

Only HTTPS requests are working for SOAP Sender and HTTP not working

wHi Experts,
We have enabled our HTTPS port ( SSL ) in NWA -- >> Security -- >> SSL and Key stores. So understanding is HTTPS port is now enabled on top of HTTP. So PI should be able to cater requests at both ports.
Now, we have developed a synchronous SOAP to RFC scenario and downloaded WSDL file. This file has both links -
a. http:<host>:<port>
b. https:<host>:<port>
We intend to make a PI system where both ports can work. Now questions.
1. When we test web service exposed from PI using SOAPUI tool, only HTTPS works fine and gets the response back. If we try HTTP URL, an error is encountered - HTTTPS scheme is required.
2. Is this whole understanding that both ports ( HTTP, HTTPS ) should be able to operate simultaneously correct ? Or this is not at all possible ?
3. In SOAP Sender, we tried selecting all 3 options - 1. HTTP 2. HTTPS without client authentication 3. HTTPS with client authentication.
None of the options have any effect on testing, Each time, only HTTPS request works and HTTP doesn't.
Can anyone please provide some hints for troubleshooting ?
Thanks..
regards,
Rajagopal.

The error "HTTPS scheme is required" is normally returned when the HTTP Security Level on the SOAP adapter is not set to "HTTP". I can see you have mentioned you have tried all these, maybe a cache refresh has gone wrong? Could try recreating the channel with just HTTP specified as security level and this should allow HTTP or HTTPS
I assume you are using a different port number for your HTTP and HTTPS requests from SOAP UI. Normally the HTTPS port is the same as the HTTP port number but the final zero changed to a 1 i.e. https://<host>:50001 instead of http://<host>:50000.
You should be able to confirm both HTTP and HTTPS work OK by loading some of the system webpages in a browser over HTTP and over HTTPS i.e. http://<host>:<port>/nwa and https://<host>:<port>/nwa
Chris

How can I view The date, time, sender and/or receiver of a text message online?

I would like to view the date and time sender and receiver of my text messages I read it can be done. I can't find where. If somone one could point me out in the right direction I would appreciate it. Thanks

Log into your account and to the right of the phone photo you will see usage details in blue then on the next screen pick the phone on the account you want to see the details for and under that you can click to see eveyrthing in detail. Mary

FTPS Sender and FTPS Receiver adapter. Pls help

Hi All,
I need to make file to file scenario with secure connection
I am using FTP Sender and Receiver Adapter with Connectivity
as FTPS.
Please let me know the steps I need to do for this
1. Integration Directory
2. If I need to generate certificates what steps I need to do:
    a. How to generate certificates
    b. Where to install these certificates like File Servers, XI
        Server etc.
3. How to use these certificates in File Server, Integration
   Directory etc.
Please send me a document to do all steps.
In advance thanks and Full Points will be awarded.
Regards

Hi,
Deploy SAP Java Cryptographic Toolkit.&
Add the CA certificate to the key storage as below.
Keystore: service_ssl
X.509 Certificate & Private Key: ssl-credentials
This means that you need to import the CA hierarchy of your FTPs server certificate into the list of trusted CA's in XI ( either on J2EE side in the keystore service or in ABAP side via transaction STRUST , depending on where your client is ).
If connection security parameter in communication channel for Sender FTP Adapter is set to "FTPs( FTP Using SSL/TLS) with Control Connection" only, file gets successfully created with data at the FTP server but as soon as we switch the connection security parameter to "FTPs( FTP Using SSL/TLS) with Control and Data Connection".The initial handshaking happens successfully and file gets created at the FTP Server but its empty, connection fails when attempt is made to write data into file and we end up with said error thereby closing the connection.
SAP Note 821267
Refer below link
SAP Network Blog: SFTP vs. FTPS in SAP PI
/people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400580c1-8d16-2a10-3eb3-ec1026dae0d5

SOAP Sender to JDBC Receiver via PCK Scenario

Hello all,
I have the following scenario:
an external program is calling my XI system which has a webservice enabled as a SOAP sender communication channel.
now, i need to pass the input over to a remote system with PCK installed on it which needs to execute a stored procedure on an oracle database via the jdbc adapter.
The jdbc adapter is deployed and working well on the PCK engine.
When I pass an xml message over to the Webservice, its also OK (in the adapter monitoring).
my question is - how can i pass the input parameters from the WS over to the PCK and then over to the JDBC adapter to execute the Stored procedure (which only writes the data).
I saw that the data type and message types of the message going to the JDBC need to be in special format including the name of the SP, action=execute and all the parameters with attribute type=datatype.
all of that is done already.
However, i still do not understand where/how does the PCK get the message and invokes the JDBC adapter for processing.
Many thanks for you help!!!

Hi Natti,
Check these..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6f83d790-0201-0010-629d-ab5bf10c94e4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3f9fc190-0201-0010-0cbd-87f50e404d91
cheers,
Prashanth
P.S Please mark helpful answers

Socket.send() and Socket.receive()

Using multi threads
Is it possible to send packet from DatagramSocket while the same Socket is waiting to receive packets?
Do i have to protect this situation?

Send and receive are separate system calls, so as long as you supply different DatagramPackets I don't think you should have a problem. Checking the Solaris docs, these calls are indicated as thread-safe.
Of course, there's no way to guarantee that your particular OS won't do anything strange, so it's a good idea to create some test programs beforehand.

SOAP sender and IDOC receiver

Similar Messages

Maybe you are looking for