SOAP Threads

Has everyone seen the same,
Platform is OES2 sp1 64 bit and GW version is 8.0.1
I have set SOAP threads to 18 and monitor tells me 48 (at poa monitor) and all them are
busy, we using gms 2.0 , yesterday it was 80 and 80 was busy, this morning I
need to to reboot to poa and first it was 18 and then started to grown in fact now its
already 79 again .
Thanks,
Jesse

Hi,
jeka1 wrote:
>
> Has everyone seen the same,
>
> Platform is OES2 sp1 64 bit and GW version is 8.0.1
>
> I have set SOAP threads to 18 and monitor tells me 48 (at poa monitor)
> and all them are
> busy, we using gms 2.0 , yesterday it was 80 and 80 was busy, this
> morning I
> need to to reboot to poa and first it was 18 and then started to grown
> in fact now its
> already 79 again .
> Thanks,
Check your GMS logs. There's most likely a corrupt user throwing errors
over errors. Fix that (possibly by a full reset), and the issue with the
soad threads should go away.
CU,
Massimo Rosen
Novell Product Support Forum Sysop
No emails please!
http://www.cfc-it.de

Similar Messages

Message worker threads maxed

Hello,
Friday I was experimenting with a global signature, assigned to the PO and trying to get it to work. In the the mean time the server abended. After rebooting I noticed that the signature started working but that the message worker threads where maxed out and messages started queueing in 4 and 5. I ran a post office repair over night and this morning things seemed better. I then turned off the global signature and now things are slow again and threads are again maxed out. Is this a normal behavior? Does the signature associate to every user in the PO? Or is something just wrong with my PO that I need to repair.
Some of my settings:
GroupWise Post Office Agent
Up Time: 0 Days 0 Hours 49 Minutes [PO]
Total
C/S Users 623
Remote/Caching Users 14
Application Connections 791
Physical Connections 129
IMAP Sessions 0
SOAP Sessions 0
Priority Queues 0
Normal Queues 3545
GWCheck Auto Queues 0
GWCheck Scheduled Queues 0
Thread Status
Total Busy
C/S Handler Threads 29 16
Message Worker Threads 20 20
GWCheck Worker Threads 4 0
IMAP Threads 4 0
SOAP Threads 2 0
Message Transfer Status Open
Thanks in advance

csupers,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

BES 5.01 MR1 and GW 8.0.1 HP1 or 8.02

Hello:
I'm in the process of migrating our current environment of BES 4.1.6/ GW 8.01 to BES 5.01 MR1. I believe the current version of GroupWise is 8.01, not 8.0.1 HP1. How do I confirm this? The GroupWise engine (GWENN5.NLM) is 8.00.01 dated August 25, 2009.
Has anyone had any issues with 8.02 with BES 5.01? RIM still recommends 8.0.1 HP1 in its compatibility matrix although 8.02 is supported.
Should I upgrade to 8.0.1 HP1 or 8.02?
All feedback welcomed.
Thanks

If you already have BES 5 started, the newest HP2 release today will fix the
dreaded SOAP maxed out threads, I have been running a unreleased HP2 code
for almost a month and have not had any issues with SOAP threads maxing out.
This release of GW 8 SP2 HP2 was given to RIM more than a week ago so that
they could certify it with BES 5 but I haven't heard if they have yet.
I believe contact sync from BES to GW hasn't been fixed yet but that's a
patch that RIM has to offer for their BES.
"Joseph Marton" <[email protected]> wrote in message
news:h1E%o.14013$[email protected] ..
> geegecko wrote:
>
>> I'm in the process of migrating our current environment of BES 4.1.6/
>> GW 8.01 to BES 5.01 MR1. I believe the current version of GroupWise is
>> 8.01, not 8.0.1 HP1. How do I confirm this? The GroupWise engine
>> (GWENN5.NLM) is 8.00.01 dated August 25, 2009.
>
> Yes, that's 801, as 801hp1 would have a date from Jan 2010.
>
>> Has anyone had any issues with 8.02 with BES 5.01? RIM still
>> recommends 8.0.1 HP1 in its compatibility matrix although 8.02 is
>> supported.
>
> I believe they're supposed to be updating their docs to fully support
> 802hp2 which was just released today. Might want to considering going
> to 802hp2.
>
> http://download.novell.com/patch/fin...4&xp=114_29583
>
> --
> Novell Knowledge Partner
> Enhancement Requests: http://www.novell.com/rms

Mailbox very slow with direct login but ok when proxying

We have a large common departmental account monitored by multiple users (yes, shared account, not shared folder). When I log in directly to the account and select a folder it can take 10-15 secs to populate the list of items. Seems to apply to nearly every folder, even those with small numbers of contents (5-30 items), not just those with many items. If I log into my own account and proxy to the shared account then the folders also get populated fairly quickly (0.5-2sec). No problem with my own folders so sounds like its specific to the other account.
Connections are c/s only. C/s handler threads spend most of their time 0 busy with occasional bursts of activity that clear again
Message handler and soap threads seem to remain at 0 all the time
C/s requests pending remains at 0.
Problem occurs running client on XP and on Windows 7 64bit.
Have run GWCHECK to fix a few probs but problem continues. Appears to be just a problem with this one account but the key point is why the difference between direct logged-in and proxied?

No I'm not particularly bothered about the LOGIN time, that only happens once. The problem is the time to browse between different folders once login is complete. (sorry for the confusion, I 'll edit the OP to make it clearer).
Good:
Login as self, proxy to uber-account, wait for completion. Then click on a random folder, wait for message list to be populated (network traffic completed <1s), GUI updated <1 sec, maybe 2secs if many messages in list. Same acceptable performance occurs when clicking on subsequent folders. Workstation CPU usage during update 1-2%.
Bad:
Login as uber-account, wait for completion. Click on a random folder, wait for message list to be populated (network traffic completed <1s), GUI not updated for 10-15secs - all of the items refreshed together at the end of the period so to the user it looks like you've clicked on a new folder and the contents is the same as the previous until it suddenly refreshes after 10secs. Same problem occurs when clicking on subsequent folders. Workstation CPU usage during update 50% (dual core in this example, so probably maxing out one core for 10 secs).
No significant disk activity during update period. No significant network tfc after initial burst. Memory ok. No change of performance when anti-virus disabled. Same behaviour on other machines so not just one baddy. My money is it's something to do with the number of folders, or the number of shared folders owned by the uber-user, or a corruption the normal GWCHECKs aren't dealing with.
Joe

POA performance issues under windows 2008 R2

Hello - we are running GW 8.02 hp3 and recently moved our main post office (~600 users) from Netware to Windows 2008 R2 (running under Vsphere 4.1).
We have started seeing intermittent slow performance issues esp. when moving a message from one folder to another, or sending a broadcast email.
It doesn't appear to be a hardware resource issue: disk queues don't exceed 1, with low latency (7-15ms) and we're not cpu or memory bound (that I can see).
Here are our current config settings:
Message Worker Threads: 15
Maximum GWCheck Worker Threads: 8
C/S Handler Threads: 30
Max Physical: 2048
Max App Connections: 4084
Soap Threads: 20
We don't see any serious errors in the logs when performance becomes slow. Could this just be a tuning issue?

In article <[email protected]>, Javerkio wrote:
> we are running GW 8.02 hp3 and recently moved our main post
> office (~600 users) from Netware to Windows 2008 R2 (running under
> Vsphere 4.1).
>
Windows is the lowest performing host for GroupWise, so that is a part
of what you are hitting.
How are you monitoring memory usage? I've found that the vCenter tools
aren't a good indicator of that, where as the Windows tools are better
in that respect. The biggy is that you don't want much paging to disk.
How much do you have assigned to this VM?, how many cores? And are
these ESX box(es) over committed on those two?
Those settings on their own don't really mean a whole lot. What we need
to see is what is actually being used, and if you are running out of
them, then upping those specific numbers can help. The best way is to
watch the POA web interface for the relevant settings.
http://hostnameorIP:7181/
Andy Konecny
Knowledge Partner (voluntary SysOp)
KonecnyConsulting.ca in Toronto
Andy's Profile: http://forums.novell.com/member.php?userid=75037

GMS Authentication source after GW IP changed

Hey,
I've recently replaced the GroupWise server, as such the IP has changed.
I went into the Intellisync Admin console and found the option to change the server IP of GW.
I then found the profile options to change the IP also. For some reason the Authentication source is still listing the old ip (GroupWise 10.1.1.12).
For the life of me I can't find where I can either edit, add or remove this authentication source....As a work around I've changed a few to use Intellisync for Auth, but this would be a pain to do for all users.
I would appreciate if someone could point me in the right direction.
Thanks
N

Are you accessing the PO as a trusted app? If so you might delete the old
trusted app key and create a new one. That profile under wireless email
should let you change the source IP to your GW system, now it's not taking,
I have no clue.
Also check your SOAP thread on the PO win the http monitor, I found out the
hard way that the GMS loves to grab all the threads keeping them in non-idle
state and make no connection to the server. I don't know the fix for that
as I am working on this problem right now and trying to decide to call
Novell or get a root canal since both are very painful.
I have all but given up on GMS since it won't play nice with GroupWise.
"nsheridan" <[email protected]> wrote in message
news:[email protected]..
>
> Hey,
>
> I've recently replaced the GroupWise server, as such the IP has
> changed.
>
> I went into the Intellisync Admin console and found the option to
> change the server IP of GW.
>
> I then found the profile options to change the IP also. For some reason
> the Authentication source is still listing the old ip (GroupWise
> 10.1.1.12).
>
> For the life of me I can't find where I can either edit, add or remove
> this authentication source....As a work around I've changed a few to use
> Intellisync for Auth, but this would be a pain to do for all users.
>
> I would appreciate if someone could point me in the right direction.
>
> Thanks
>
> N
>
>
> --
> nsheridan
> ------------------------------------------------------------------------
> nsheridan's Profile: http://forums.novell.com/member.php?userid=4561
> View this thread: http://forums.novell.com/showthread.php?t=397147
>

GWIA IMAP Client Limits?

What is the max IMAP clients an admin should allow to hit a single GWIA
gataway using default threads?
I'm having serious abend issues and have narrowed it down to IMAP clients
hitting my GWIA, I getting colored debugging screen on my Netware 6.5 server
that I have never ever seen in 25+ years in working with Netware.
I "guess" I'm going call Novell since the only way to keep my GWIA up is to
disable IMAP but I'm not sure what's worse, talking to front line Novell
support or listening to my user tomorrow morning complain that that their
fancy dancy iPhones can't get email.

Oh I was just grasping a straws, I have a ton of word of mouth iPhone users
that they passed the email IMAP & SMTP addresses around and without having
predefined limits on GWIA of who could or couldn't access it, suddenly I
have several hundred IMAP users along with over hundred moblity users.
I running test code from Novell to address the SOAP thread issues which
seems to work, problem was in that first release of this test code, there
appear to a GWIA IMAP bug, newest test code seems to fix the GWIA now, I'm
running 3 days now without an crash and SOAP is behaving ok.
"Peter Schwindt" <[email protected]> wrote in message
news:ogCVo.10869$[email protected]. .
> On 01/07/11 03:18, Michael Rae wrote:
>
>> I "guess" I'm going call Novell since the only way to keep my GWIA up is
>> to
>> disable IMAP but I'm not sure what's worse, talking to front line Novell
>> support or listening to my user tomorrow morning complain that that their
>> fancy dancy iPhones can't get email.
>
> Why not set-up Mobility and have them leave your IMAP for "normal"
> users? ;-)
>
> Peter

GMS API Mode

Can anyone tell me if I can enable API mode for GMS. GMS with SOAP is just plain bad... Are BES never gives us any issues and that is because we run in api mode.
For those folks out there that are thinking of updating to GW801HP1 to fix soap issues, don't bother.
The version of GMS I'm running is 8.0.104.4.

I performed more testing and have decided to install Intellisync back on the workstations and kill GMS.
>>> On 2/10/2010 at 7:48 AM, Kirk White<[email protected]> wrote:
I bumped my threads back up from 5 to 10 to get the PDA's working again. I have figured this out in a week and that is GW801HP1 is worst than GW703HP2.
>>> On 2/9/2010 at 1:02 PM, Michael Rae<[email protected]> wrote:
Don't be too scared of BES 5.0, it's better than you may think when it comes to SOAP and it's a major improvment to 4.1.
Personally I think that the major issue with the POA and SOAP is GMS, I'm using several SOAP applications and the thing that creates most of the problems is GMS.
Since Novell isn't developing anything for GMS, I believe they are trying to work out the SOAP problems at the POA level rather addressing the source of the issue which is GMS, most GW installations only deal with GMS so that's what the majority of admin's see it.
"Kirk White" <[email protected]> wrote in message news:[email protected]...
Michael, thanks for the info.
So do you think Novell will have the SOAP problems fixed in GW 9... This reminds of back in the '90's Novell claimed that they had the fastest Java server in production. To bad they didn't have any programmers that could write Java Code.
I guess I won't be installing BES 5 when it comes out.
Config:
NetWare 6.5.8 Clusters with Protected Memory
Problems:
Sucks all the memory out of my servers.
Worst it brings my servers up to 100% utilization.
I do have maintenance. You're right do I need to create an incident so they can tell me that SOAP will be fixed in HP2, SP2, SP2HP1, SP2HP2, and so on.
If throttling back my threads don't work here are my option may be loading the intellisync back on the workstations.
>>> On 2/8/2010 at 5:57 PM, Michael Rae<[email protected]> wrote:
You are pretty much stuck with SOAP with GMS, yes the trusted app API is there to handle authentication but other than that, that's all they wrote and will right for GMS.
Get your SOAP fired up, in BES 5, it too will be all SOAP with no option for OAPI.
What type of issues are you having, just running out of memory on POA? Are you running the POA on Netware or SLES? I'm running mine on NetWare with a few minor with about 1100 users on a single PO.
How many GMS users do you have? One thing I found after new years day, my GMS wacked out the PO. Novell TAC & I never really figured out the problem however removing all the users from GMS fixed it (and letting them recreate themselves!) My GMS didn't appear to like the old inactive users esp the ones that existed in GMS but no longer were in eDir or GW.
No real earth shattering news on how to run SOAP successfully with GW, the 100% utilization is a known problem. Do you have paid maint? I would open a incident with support but the story you will hear is that it's a known problem and will be fixed in SP2....
Check your POA stats though web monitor, are your Soap threads not going idle? That's the problem I had, Soap thread would increase and REGARDLESS of how or few I allocated, the threads would not go idle and the server util would just keep rising including trying to unload the POA would lock the server up as it tried to release the threads.
Hang in brother, I feel your pain.
"Kirk White" <[email protected]> wrote in message news:[email protected]...
Can anyone tell me if I can enable API mode for GMS. GMS with SOAP is just plain bad... Are BES never gives us any issues and that is because we run in api mode.
For those folks out there that are thinking of updating to GW801HP1 to fix soap issues, don't bother.
The version of GMS I'm running is 8.0.104.4.

Exception in thread "main" java.lang.NoClassDefFoundError: javax/xml/soap/S

Hi,
I have created a class JaxmClient.java. When I compile the class with appropriate jar files assigned to -classpath it compiles successfully with no errors. But when I run the classe "java JaxmClient" it produces the following exception:
Exception in thread "main" java.lang.NoClassDefFoundError: javax/xml/soap/SOAPElement
Can someone help me I am knew to this technology.
Thanks in advance

I tried to use in my execution all the jar files that I used for compilation.
java -cp jaxm-jar; etc.jar Request
but it still gives me this execption
Exception in thread "main" java.lang.NoClassDefFoundError: Request
I am in the right directory where is the Request.class file is and it is present in this directory....
Thanks appreciate your help...

How to increase max thread for SOAP adapter ?

Hi PI Expert,
I have problem with Synchronous SOAP transaction in PI 7.0 EHP1 SPS2. The interface actually using ccBPM.
IDOC ---> ccBPM -
> synchronous call to SOAP adapter.
The problem is there are always timeout call from Integration server to SOAP adapter after several transaction success.
it seems like the soap adapter is doesn't has enough thread to receive call from IS.
the pattern is like success, success, failed, success, success, failed. it always 1 errror within 1 minutes for 4-5 transaction in the same minutes.
is that any log in adapter that i can check or how to increase soap adapter thread ?
Please advise ?
Best Regards
Fernand

Hi Fernand,
please check this blog:
Adapter Specific Queues in PI
/people/sunil.singh13/blog/2009/03/30/adapter-specific-queues-in-pi
Regards,
Gábor

How to control number of concurrent threads in SOAP Adapter (Receiver)

Hi all,
I have an interface:
File -> XI -> SOAP
The file contains multiple records, and for each record, 1 SOAP request is sent out.
My question is:
1. How many concurrent outgoing SOAP requests are being sent out to the external system from XI? Is this configurable?
Please help.
Thanks.
Ron

Hi experts,
still no answer to my question.
But I will really like to know how can I throttle the number of outgoing messages from XI when the external system cannot handle such a high load.
Please help.
Thanks.
Ron

Host parameter null and convert SOAP to HTTPUrl

Hi,
We are trying to fire a SOAP request and print the response but its throwing this error
Exception in thread "main" java.lang.IllegalArgumentException: host parameter is null
The piece of code is:
HttpClient hc = new HttpClient();
System.out.println("Came here");
int iResultCode = hc.executeMethod(post);
executeMethod(post) is failing but when I print the value of post, its �org.apache.commons.httpclient.methods.PostMethod@fd54d6�
Can anybody throw some light on this error and how to solve it??
Also, there�s another issue.
We are upgrading from Weblogic 7.2 to 9.1
Earlier we were able to pass the request and get the response in HTTPUrl form but now after upgrading, its getting passed in SOAP format. Is there any way to bypass the SOAP and get it in HTTPUrl format or what are the configurations to be made to adapt to the SOAP format?
connection =(HttpURLConnection) url.openConnection();
This line was returning HTTPUrl format, now its coming in SOAP format

your PostMethod takes the Url as the parameter. Check you are using the proper URl i.e like http://host:port/name?params like that

How Can I call a UCM service from SOAP request

Hi,
I have created one custom service and I would like to call that service from 3rd Party system via SOAP call. The 3rd Party system does not have the capability to call through RIDC.
Now I have exposed my service and tried to call but authentication exception was coming status code 401.
So I created one sample ADF application and tried to call the DocInfo service for testing (I thought let's try DocInfo then I will check my custom service). I downloaded the DocInfo service from UCM and uploaded the WSDL into the project and got the client DocInfoSoapClient.java file.
public class DocInfoSoapClient
@WebServiceRef
private static DocInfo docInfo;
public static void main(String [] args)
    docInfo = new DocInfo();
    DocInfoSoap docInfoSoap = docInfo.getDocInfoSoap();
    DocInfoByNameResult res = docInfoSoap.docInfoByName("TEST_001603", null);
    System.out.println(res.getContentInfo());
    // Add your code to call the desired methods.
The error is coming like:
Exception in thread "main" com.sun.xml.ws.client.ClientTransportAccessException: The server sent HTTP status code 401: Unauthorized: http://xxxxxxxx:16200/_dav/cs/idcplg
at com.sun.xml.ws.transport.http.client.HttpTransportPipe.getClientTransportException(HttpTransportPipe.java:340)
I tried a lot but same error. There should be some process by which I can send the userid and password but failed. Even I tried to send the properties as key value pair in IdcPropertyList but I know that is wrong.
I checked the Issue: https://community.oracle.com/thread/2424460
But there was no answer.
Can anyone help on it?
Regards,
Santanu

Hi Santanu,
You need to write SoapHandler in order to pass username and pwd. You will need 2 classes namely HeaderHandlerResolver & SoapHandler. This is how i do in in my JAX-WS clients. I generate stubs and then attach handler to webserviceinterface
PFA HeaderHandlerResolver.java and SoapHandler.java you would attach soap handler something like this in your code i have never done this via ADF so not sure.
HeaderHandlerResolver soapHandlerResolver = new HeaderHandlerResolver();
docInfo.setHandlerResolver(soapHandlerResolver);
In SoapHandler class you will mention username and pwd like this
soapMessageContext.put(BindingProvider.USERNAME_PROPERTY,"username");
soapMessageContext.put(BindingProvider.PASSWORD_PROPERTY,"pwd");
Regards,
Amol Gavali

Javax.xml.rpc.soap.SOAPFaultException: "Server Error" while calling a WSDL

Hi
I am using a WSDL in my java code by creating proxy.
I am getting an exception on below line of code
XX_RESPONSE res = port.XX_XX_Forecast(req);
exception :
javax.xml.rpc.soap.SOAPFaultException: "Server Error"
hat could be the possibility.
is it from XI side or Java side.
Shall I catch a XI person on my floor to solve this !!
To be more specific :
Error is
<detail xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
<context>XIAdapter</context>
<code>ADAPTER.JAVA_EXCEPTION</code>
<text>com.sap.aii.af.service.cpa.CPAException: invalid channel (party:service:channel) = <null>
at com.sap.aii.af.mp.soap.web.MessageServlet.getChannel(MessageServlet.java:499)
at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:409)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)</text>
</s:SystemError>
</detail>
Thanks

Hi...
WSDL forwarded by my manager was wong
I tested it and it threw same exception.
nyways...1 more help..
Now, is there any way in NWDS to replace contents of used WSDL.
Because only 1 "=" is missing in WSDL..
Thanks

Error while sending a soap request from XML SPY to a webservice in XI

Hi ,
I published a webservice om the XI end and testing it with consuming the WSDL file in XML SPY and sending a soap request from there.
I am getting the following error .
<b>com.sap.aii.af.mp.module.ModuleException: either no channelID specified or no channel found for the specified party, service, and channel name</b>, MessageServlet(Version $Id: //tc/xi/645_VAL_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#4 $)
     at com.sap.aii.af.mp.soap.web.MessageServlet.doPost(MessageServlet.java:380)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Is this error due to the user authentication or due to some other issue .
Please do let me know soon .
Thanks a lot
Nikhil

Hi Ricardo ,
I have the correct port now.
the url looks like
http://<host>:50000/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST
when I am testing it in the XML spy. and send a soap server request. I am getting the popup for user authentication . once i put my user id it gives me a error saying
<b>HTTP operation 'POST' could not be performed on URL
'/XISOAPAdapter/MessageServlet?channel=:SIEBEL_DEV:SOAP_CUST&version=3.0&Sender.Service=SIEBEL_DEV&Interface=http%3A%2F%2FOFCOM%2FUNIFY%2FCustomerMaster%5EMI_CUST' due to an error :
The connection to the server was terminated abnormally</b>
Any Idea as to why is such a error is coming
Thanks for the help
Nikhil

SOAP Threads

Similar Messages

Maybe you are looking for