SOAP version for B2B HTTP inbound message in SOA Suite 11.1.1.7

Is there a way to find out the SOAP version supported by B2B HTTP inbound message in SOA Suite 11.1.1.7? Has there been a upgrade of SOAP version to SOAP 1.2?
The reason behind this assumption is because we are facing following error when an external service posts an XML message enclosed in SOAP envelope (SOAP 1.1) to B2B Sync Receiver Servlet:
Mime Header Content-Type: text/xml requires SOAP envelope namespace
Since SOAP headers are already added in the message we are not expecing to face such issue. As per my understanding this issue maybe seen when there is a SOAP version mismatch.
Moreover, this issue is not seen when this external service posts the same SOAP message to B2B Sync Receiver of SOA suite 11.1.1.6.
Any help would be highly appreciated.
Thanks,

I resolved the issue by myself, The connection factory which I was referring was duplicated. Hence messages were not dequeueing.
I would be able to found the issues by creating a similar test case scenario.
Cheers,
B

Similar Messages

EDI Message Type for Credit Memo inbound message

Hi Experts ,
We have ECC6.04.
We configured Incoming vendor invoice idoc ( Message Type - INVOIC, Basic type - INVOIC02) which is working fine. We also have Credir Memo incoming message ( Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)
I am using same IdoC in WE19 that of Invoice, which successfully posted and editing the BSART as CRME and entering the Messgae type GSVERF , but when I am posting it system is giving error
No record exists in T661W for vendor 2000001 , plant , unloading pointMessage no. V4032
Diagnosis
The system could not determine a sold-to party as no record has been specified in Table T661W for the displayed supplier, plant, and unloading point values.
System Response
IDOCS processing is terminated.
Procedure
Please create a record in Table T661W for the above values and restart the IDOCS planning from electronic mail.
and
EDI: Syntax error in IDoc (segment cannot be identified)Message no. E0078
Diagnosis
The segment E1EDK04 does not occur at the current level of the basic type GSVERF03 (extension ).
This error can have several reasons:
The segment E1EDK04 is assigned to a group whose header segment does not occur.
The segment E1EDK04 does not exist in the syntax description of the basic type GSVERF03 (extension ).
The sequence of segments in the group in which the segment appears is incorrect.
Previous errors ('mandatory' segment or group missing) may be due to this error.
Procedure
Please check the IDoc or the syntax description of the basic type GSVERF03 (extension ).
Th table T661W is for Vendor, partner decribtion, Sold to party, Unlaoding Point. So I am not getting whsy sold to part relevant table ssytem is asking to make entry ?
Can anyone please suggest/help me what is the problem and solution on this ?
Thanks
NAP

Hi ,
Currently we are using Message Type - GSVERF , Basic type - GSVERF03 , Processing code- GSVE , FM-IDOC_INPUT_GSVERF_START and assigned this FM to Object Type- BUS2094)..which is giving above error. I just found that process code GSVE is for Outbound message
Can any one suggest / confirm what should be exact Message Type , Basis Type, Process code and Funct. Module requiered for processing EDI inbound message in MM - Logistics Inv Varification ?
Thanks
NAP

How to maintain Strict Ordering of messages using SOA Suite where AQ is used for persistence.

The requirement is this -
Source DB -> Poller DB Adapter-> BPEL -> AQ -> DEQUEUE -> Target System
Messages are DEQUEUED from an AQ (second part above - AQ -> DEQUEUE -> Target System) . The messages in this AQ are to be sent strictly in order to the Target system. In case there is an error during this processing of messages from the AQ to the Target system. The process should HALT and the message must be rolledback. Put in other words - the interface should stop . There must be no message loss in any circumstances. There should not be any further dequeue of messages or there should be no more instances created due to this. Only when someone has seen this error / error message and acted on this error message/error shall this processing get started. Any idea how do we achieve this using SOA Suite 11g? Hope I have been able to explain well about the problem.
Environment - has two soa managed servers on weblogic (clustered).
Please suggest ways to achieve this scenario. This is very crucial and needs implementation within 2 days of time.

Hi,
You can use Mediator Resequencing if looking for a standard solution. Else introduce Timestamp while pushing messages in AQ and sort them by Timestamp during processing - not a neat solution though.
Regards,
Neeraj Sehgal

Is B2B document editor necessary in SOA suite 11g environment?

Hi All,
In my server, SOA suite 11g is installed, which include B2B engine also.For devoloping a POC in B2B environment, document editor is necessary or not?. Without document editor, is it posible to devolop a simple POC? I am completely new to this B2B environment.
Regards
Dd

Integration B2B forum is -
Integration - B2B
Document Editor is optional and will be used in case of B2B. For further clarification, raise a thread in B2B forum.
Regards,
Anuj

Does OEM 12c supports for performing administration tasks on Oracle SOA Suite 10.1.3.5 environment ??

Hello Everyone,
I would like to start a discussion on the OEM 12c see if anyone has used for SOA Suite 10g. We are currently running on Oracle SOA Suite 10.1.3.5 we want to make use of OEM 12c for monitoring and perform administration activities. I have gone through some Oracle documents for OEM 12c,I found it's supported up to 10.1.3.4.However I am not so sure so I just wanted to clarify on this.
Can we install the client in Oracle Application Server/SOA OC4J container to perform any administration task,purging,patching,monitor interfaces etc.
I look forward to your valuable input and feedback on the discussion.
Best Regards,

Hi,
The zip p6511843_101330_Generic.zip contains a README.txt which explains the steps to be followed to apply this patch.
In the README.txt
Refer to Section2 point No.1.
Get the latest Opatch from metalink for bug 2617419.[this zip will contain a Opatch Directory].Extract this zip into your Oracle SOA home.[ex: C:/product/101.3.1/OracleAS_1]
Also make sure that the Opatch directory in set in the path.
Since we are running this Opatch on a Basic SOA installtion , you don't have to execute the changeNamesWindows.pl script[make sure that you have installed Basic version of SOA and not the Advanced].
This patch will not work on Advanced Install.
You can directly excute
opatch apply.
Follow the remaining steps mentioned in README.txt.
Thanks
Hot-Plug Team

Http post issue in soa suite 11g with 10g wsdl

I have 10g process that has http post wsdl as below. When I'm trying to create a project in 11g 11.1.1.4 with same wsdl, getting the following error at building the project. "Error(12,61): Parse of component type files failed, check the adf-config.xml file : "Error at line 34 char 64: Malformed WS Binding port. Missing # between namespace URI and service/port names."
I'm sure that http post mechanism is changed in 11g, but can you please help what exactly is wrong ?
<?xml version="1.0"?>
<definitions name="HTTPPostService"
targetNamespace="http://services.otn.com"
xmlns:tns="http://services.otn.com"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
          xmlns:http="http://schemas.xmlsoap.org/wsdl/http/"
          xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
>

<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified"
targetNamespace="http://services.otn.com"
xmlns="http://www.w3.org/2001/XMLSchema">
<element name="Postreq">
<complexType>
<sequence>
<element name="Order_Update_Request">
<complexType>
<sequence>
<element name="ORD_ID" type="string"/>
<element name="E_MAIL" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
<element name="Postresp">
<complexType>
<sequence>
<element name="Order_Update_Response">
<complexType>
<sequence>
<element name="RETURN_STATUS" type="string"/>
<element name="MESSAGE_TEXT" type="string"/>
</sequence>
</complexType>
</element>
</sequence>
</complexType>
</element>
</schema>
</types>

<message name="HTTPPostServiceRequestMessage">
<part name="payload" element="tns:Postreq"/>
</message>
<message name="HTTPPostServiceResponseMessage">
<part name="payload" element="tns:Postresp"/>
</message>


<portType name="HTTPPostService">
<operation name="IScript_Update_Order">
<input message="tns:HTTPPostServiceRequestMessage" />
<output message="tns:HTTPPostServiceResponseMessage"/>
</operation>
</portType>
<binding name="HTTPPost" type="tns:HTTPPostService">
<http:binding verb="POST"/>
<operation name="IScript_Update_Order">
<http:operation location="/PSIG/HttpConnector?From=PSFT_XINBOUND&MessageName=ABC_ORD_UPDORDER&MessageType=sync&MessageVersion=v1"/>
<input>
<mime:mimeXml part="payload"/>
<mime:content type="text/xml"/>
</input>
<output>
<mime:mimeXml part="payload"/>
          <mime:content type="text/xml"/>
</output>
</operation>
</binding>
<service name="HTTPPostService">
<port name="HTTPPost" binding="tns:HTTPPost">
<http:address location="http://myserver.mycompany.com"/>
</port>
</service>

<plnk:partnerLinkType name="HTTPPostService">
<plnk:role name="HTTPPostServiceProvider">
<plnk:portType name="tns:HTTPPostService"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>

Can you make sure your helloworld is using adf bindings as mentioned in thread Re: Urgent :: 11g Invoking Composite from Java/From Webservice Proxy

HTTP Binding limitation in SOA Suite 11.1.1.5

Hi,
We are using BPEL to integrate our systems with 3rd party systems, where we are the consumer of the service given by external vendor. The external vendor exposes XML based service (REST services) and have given a url to perform certain functionality. We are using POST method to call the service.
In our case, the external vendor is expecting XML without the namespaces and it's a limitation at their end. So they can't modify or rebuilt their existing system to support XML namespaces. But the HTTP binding wizard is not allowing to select the input and output if no namespace is used.
So how to overcome this problem or is it a limitation of HTTP binding that it mandates the use of namespaces. Did it in another way by converting the xml payload to string but this will not scale for larger payloads. So looking for a resolution on this.
Thanks & Regards
Siva

My requirements are slightly different. I have users in a SUN LDAP directory. I need to give access to these users to the worklistapp. I have other requirements too. Like me weblogic admins also need to authenticate to the same LDAP. My build and deploy teams should also use the same process to deploy composite apps to the server.
I am able to add a provider in myrealm. Make sure that the users that I need are readby the provider. I tested this with one user and that user is able to login to the worklist app, after I did all the steps mentioned in the thread.
Not sure if this meets your requirements too
Atul

Do I need IIS or Task Scheduler for a windows install of the SOA suite

I am currently trying to set a R&D SOA environment up on a windows box. By default these services are disabled when we usually set up our application servers within dev. So do I need IIS and task scheduler to be running on the windows environment when I install the SOA suite?

Hi,
you do not need the IIS because SOA Suite is shipped with its own Apache.

Which Companion Version for WebCenter Extensions in JDeveloper 11.1.1.5

My firm is using SOA Suite 11.1.1.5 for a variety of services which requires JDeveloper Studio 11.1.1.5. However, my firm also develops applications using ADF / WebCenter (currently 11.1.1.4, soon to be 11.1.1.6). While trying to experiment with a simple WebCenter application in JDeveloper and run a simple one-page test using the Integrated WebLogic domain within JDeveloper, the script used to "extend" that integrated WebLogic domain fails to execute successfully, stating extension JAR oracle.wc_adrs_template_11.1.1.jar is missing.
That JAR is provided by the WebCenter Suite JDeveloper Extension which is provided as part of the "Fusion Middleware Companion". I went to http://edelivery.oracle.com, drilled into Fusion Middleware 11g for my platform (Linux x86-64) then selected the 11.1.1.5 version of the "Companion". (I also downloaded the 11.1.1.6 version as well, more on that in a second...)
I unzipped the archive of the 11.1.1.5 companion, drilled into the Disk1/SmartUpgrade directory, then unzipped the WLsmartupgrade.zip archive, then copied jdeveloper_smartupgrade.zip to a folder on my Windows Vista machine used to run JDeveloper. I then started JDeveloper, went to Help | Check for Updates... then chose "Install from Local File" as the source and browsed to the location of the jdeveloper_smartupgrade.zip file and selected it.
The following compatibility errors were displayed:
Extension Required Version Installed
oracle.toplink min=11.1.1.1.0, max=11.1.1.4.99 11.1.1.5.37.60.13
oracle.jdeveloper min=11.1.1.1.0, max=11.1.1.4.99 11.1.1.5.37.60.13
Ooooooookay, so how about the 11.1.1.6 "companion"? I unpacked that archive, extracted its version of jdeveloper_smartupgrade.zip to a directory, then attempted to load that patch within JDeveloper 11.1.1.5 and encountered the following compatibility errors:
Extension Required Version Installed
oracle.toplink min=11.1.2.0, max=11.1.2.99 11.1.1.5.37.60.13
oracle.jdeveloper min=11.1.2.0, max=11.1.2.99 11.1.1.5.37.60.13
In short, the "companion" content labeled 11.1.1.5 requires extension versions TOO LOW for the default extensions installed as part of the 11.1.1.5.x build of JDeveloper. The "companion" content labeled 11.1.1.6 requires extension versions TOO HIGH for the default extensions installed as part of the 11.1.1.5.x build of JDeveloper.
Is there some other patch file somewhere that is compatible with the 11.1.1.5.37.60.13 versions of these other extensions? Again, it is NOT clear to me that upgrading JDeveloper from 11.1.1.5 to a newer version will maintain compatibility with the existing SOA Suite infrastructure I also need to interact with.
Thanks.

Thanks for your answer.
My Requirements are:
1) Develope a stand alone ADF FACES(JSF 2.0) application
2) Develope a Portal using webcenter- We need to implement portlets by taking some of the functonality that was implemented in section (1) and use the Portlet-JSF bridge to create the portlets.
Basically, we need to support JSF 2.0 standart.
As I understood I must use the JDeveloper 11.1.2 version as it support the JSF 2.0. but what about the Webcenter and the Portlet-JSF bridge to support JSF 2.0 ?
I will be happy to get a clarification for those requirments.
Thanks a lot !
Eli

Oracle SOA Suite for Healthcare Integration

Oracle SOA Suite for Healthcare Integration :
*To provide healthcare customers with comprehensive healthcare integration capabilities within a unified enterprise application infrastructure platform, Oracle announced Oracle SOA Suite for healthcare integration.
*Oracle SOA Suite for healthcare integration delivers healthcare message standards support, dashboards and monitoring for healthcare collaboration, and a toolkit for rapid HIPAA 5010 upgrade and compliance.
*Oracle SOA Suite for healthcare integration helps healthcare organizations lower operating costs and speeds time-to-market by delivering a consistent user interface, management console and monitoring environment, as well as healthcare libraries and templates for healthcare customer projects.
*Oracle SOA Suite for healthcare integration capabilities are part of the Healthcare Adapter for Oracle SOA Suite 11g.
*A component of Oracle Fusion Middleware 11g, Oracle SOA Suite 11g is an integrated, best-of-breed suite that helps organizations rapidly design and assemble, deploy and manage, highly agile and adaptable business applications.
For more details :
http://www.oracle.com/us/corporate/press/520240
Oracle SOA Suite for Healthcare Integration

http://www.oracle.com/technetwork/middleware/healthcare/overview/index.html

Error receiving AS2 message from partner: B2B-50037: B2B inbound message processing error

B2B/SOA 11.1.1.6.0
We are setting a new trading partner and when we started document transmissions we are getting errors on the inbound messages: B2B-50037: B2B inbound message processing error.
The attachment shows the relevant lines from the soa log and diagnostic log files. Here is the error detail that shows:
[URI: /b2b/httpreceiver] Error -: B2B-50037: B2B inbound message processing error[[
Error -: B2B-50037: B2B inbound message processing error
        at oracle.tip.b2b.engine.Engine.processIncomingMessageImpl(Engine.java:3143)
        at oracle.tip.b2b.engine.Engine.processIncomingMessage(Engine.java:1650)
        at oracle.tip.b2b.transport.InterfaceListener.onMessageLocal(InterfaceListener.java:403)
        at oracle.tip.b2b.transport.InterfaceListener.onMessage(InterfaceListener.java:214)
        at oracle.tip.b2b.transport.basic.TransportServlet.doPost(TransportServlet.java:754)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
        at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
        at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
        at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
        at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
        at java.security.AccessController.doPrivileged(Native Method)
        at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
        at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
        at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
        at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
        at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
        at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
        at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
        at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
        at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
        at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
        at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
        at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
        at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
        at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
From the b2b_wire_message we get these Protocol_Transport_BINDINGS:
ChannelName=TransportServlet
Reverse-Via=LIN-ISA1
AS2-To=accobra.....
Date=Fri, 26 Sep 2014 05:46:17 +0000
AS2-Version=1.2
AS2-From=K.......
Disposition-Notification-Options=signed-receipt-protocol=optional, pkcs7-signature; signed-receipt-micalg=optional, sha1
Disposition-Notification-To=http://<ip&port>/as2in
Message-ID=<[email protected]>
MSG_RECEIVED_TIME=Fri Sep 26 00:46:17 CDT 2014
ECID-Context=1.0050z5j^buc6yGn6wnZf6G0002f60007bt;kXjE1ZDLIPGIj2QCYV8QoKSSmLRO_PQT_IS
Content-Type=application/pkcs7-mime; smime-type=enveloped-data; name=smime.p7m
Proxy-Client-IP=172.17.25.101
MIME-Version=1.0
User-Agent=e-integration AS2 Server V 6.1.8
X-Forwarded-For=172.17.25.101
Content-Length=3602
Host=nalinsoa05.abd.ad.acco.com
x-weblogic-cluster-hash=QoZzGUzdcjBD5fGIE8Uos5abiHI
EDIINT-Features=multiple-attachments, CEM
Connection=Keep-Alive
X-WebLogic-KeepAliveSecs=30
X-WebLogic-Request-ClusterInfo=true
The message creates a wire message, business message, and an application message.
What doesn't happen is no MDN gets sent back to the partner. It should be a synchronous MDN.
We have double checked the certificates on both ends and they are OK.
The document and Agreement get recognized OK:
Refer To Message
Refer To Message
Sender Type
AS2 Identifier
Sender Value
K. . .
Receiver Type
AS2 Identifier
Receiver Value
accobr. . .
Sender
K. . . l
Receiver
ACCO . . .
Agreement Id
K. . .l_EDI_X12_4010_856_856Def_Inbound
Agreement
K. . .l_EDI_X12_4010_856_856Def_Inbound
Document Type
856
Document Protocol
EDI_X12
Document Version
4010
Message Type
REQ
Direction
INBOUND
State
MSG_ERROR
Acknowledgement Mode
SYNC
Response Mode
ASYNC
Send Time Stamp
09/26/2014 12:46:17 AM
Receive Time Stamp
09/26/2014 12:46:17 AM
The error is vague enough to provide little or no help in locating the root cause of the issue.
Any assistance in providing information on how to get this working would be greatly appreciated.
We do have dozens of other AS2 partners working in this instance just foe reference. We are just having issues with this new partner setup.
Thank you.
Regards,
Ken

Ken,
I am observing the Ack Mode is set as "SYNC" . This is selected by default. This option is available in the channel configuration section
If the usecase is not SYNC, please change as ASYNC and test. It should work.

[URGENT] Get Inbound Message in EBS Using XML Gateway + SOAP

Hi experts,
I want to ask you about how to process the inbound message using XML Gateway and SOAP protocol.
I have 2 EBS instances, let's called it A (source) and B (destination).
FYI, I'm following this ebook: "Oracle E-Business Suite Development and Extensibility Handbook" in chapter 12 regarding Oracle XML Gateway.
So I don't use BPEL PM to do this.
I'm just using EBS with XML Gateway and Integrated SOA Gateway responsibilities.
When I tried to send the XML from A to B using OXTA, it's success, the data can be processed in B and could store in the database.
But when I tried to use SOAP, the XML message that has been sent from A is success, and when I check it on B (Integrated SOA Gateway -> SOA Monitor), the message is in there and I can see the SOAP request and response as well.
SOAP request:
<?xml version="1.0" encoding="UTF-8" ?>
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns0="http://xmlns.oracle.com/apps/fnd/XMLGateway" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
- <env:Header>
- <ns0:XMLGateway_Header>
<ns0:MESSAGE_TYPE>XML</ns0:MESSAGE_TYPE>
<ns0:MESSAGE_STANDARD>OAG</ns0:MESSAGE_STANDARD>
<ns0:TRANSACTION_TYPE>XKLB</ns0:TRANSACTION_TYPE>
<ns0:TRANSACTION_SUBTYPE>ORDER_DETAILS_XO</ns0:TRANSACTION_SUBTYPE>
<ns0:DOCUMENT_NUMBER>9282</ns0:DOCUMENT_NUMBER>
<ns0:PARTY_SITE_ID>142</ns0:PARTY_SITE_ID>
<ns0:USERNAME>cons.ade</ns0:USERNAME>
<ns0:PASSWORD>cons.ade</ns0:PASSWORD>
</ns0:XMLGateway_Header>
</env:Header>
- <env:Body>
<ns0:ReceiveDocument xsi:type="xsd:string"><ORDER_DETAILS_XO xmlns=""> <ORDER> <ORDNO>100002</ORDNO> <ORDWT>100002</ORDWT> <RDATE/> <CITY>JAKARTA</CITY> <ZIP>17121</ZIP> </ORDER> </ORDER_DETAILS_XO></ns0:ReceiveDocument>
</env:Body>
</env:Envelope>
SOAP response:
- <env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header />
- <env:Body>
- <ReceiveDocument_Response xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">
<ResponseCode xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">200</ResponseCode>
<ResponseMsgId xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">BD4EAD91E76051D5E0440021287448DA</ResponseMsgId>
<ResponseInfo xmlns="http://xmlns.oracle.com/apps/fnd/XMLGateway">Document received and pushed into queue for asynchronous processing. Enqueued message id is 'BD4EAD91E76051D5E0440021287448DA'.</ResponseInfo>
</ReceiveDocument_Response>
</env:Body>
</env:Envelope>
But the problem is the message that has been got in B can't store into the database yet.
I had already changed the Queue in the XML Gateway -> Define Transaction, from APPLSYS.ECX_IN_OAG_Q (this is for OXTA) to APPLSYS.WF_WS_JMS_IN.
After I invoke the webservice and the SOAP message has been got in B, I checked APPLSYS.WF_WS_JMS_IN in database and there is 1 record, the value of USER_DATA column is:
((, , , , , , ((BES_EVENT_NAME, 100, oracle.apps.fnd.wf.ws.inbound.xmltx.receive, , 27), (BES_EVENT_KEY, 100, 796550960, , 27), (BES_PRIORITY, 200, , 1, 23), (BES_FROM_AGENT, 100, [email protected], , 27), (BES_TO_AGENT, 100, [email protected], , 27), (MSG_ID, 100, 1334117503435, , 27), (ECX_MESSAGE_TYPE, 100, XML, , 27), (ECX_MESSAGE_STANDARD, 100, OAG, , 27), (ECX_PARTY_SITE_ID, 100, 142, , 27), (WS_PORT_OPERATION, 100, ReceiveDocument, , 27), (ECX_TRIGGER_ID, 100, 7101, , 27), (UserId, 100, 3020, , 27), (ECX_USERNAME, 100, CONS.ADE, , 27), (ECX_TRANSACTION_SUBTYPE, 100, ORDER_DETAILS_XO, , 27), (ECX_PASSWORD, 100, CONS.ADE, , 27), (ECX_DOCUMENT_NUMBER, 100, 9285, , 27), (BES_PAYLOAD_OBJECT, 100, false, , 27), (ECX_ATTACHMENTS, 100, , , 27), (ECX_TRANSACTION_TYPE, 100, XKLB, , 27), , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , )), 0, , )
When I tried to select APPLSYS.WF_WS_JMS_IN for the 2nd time, there is no result, which means the business event has been triggered, right?
So in this point I still don't have any idea why the process is (likely) ended after enter the Queue and the message can't store into B's database yet.
Do I miss any setup when changing from OXTA into SOAP protocol to send XML message?
Any urgent help most appreciated.
Best Regards,
Rheza

Hi,
Did you ever get any answers to this? We are thinking about the same thing.
Thanks
Darma
[email protected]

Error capturing SOAP fault for Sync Messages

Hi
We have a Sync interface which makes a Proxy call from ECC to PI and then PI makes Soap Sync call to Web application. We are having issues when handling Exceptions. Sender is getting misleading errors in response, even though they are application errors the proxy sender is getting error like MappingObjectNotFound.
When debug the PI system, PI is truncating error info when it return the reponse.
Below is the scenario of Synchronous interface:
ECC(Proxy) -> PI(Soap Receiver Adapter) -> MasterDataApp-(Webserver)
Below is the actual response from Webserver (Extracted via TCPGW sniffer):
<?xml version="1.0" encoding="utf-8"?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<soapenv:Body>
<soapenv:Fault>
<faultcode>soapenv:Server.userException</faultcode>
<faultstring>*java.rmi.RemoteException: No Messages Found*</faultstring>
<detail>
<ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">hostname.com</ns1:hostname>
</detail>
</soapenv:Fault>
</soapenv:Body>
</soapenv:Envelope>
But PI receives this response payload like this :
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
<ns1:hostname xmlns:ns1="http://xml.apache.org/axis/">hostname.com</ns1:hostname>
and then Sync Request mesasge fails with below error because of the unexpected response payload as shown above:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
<SAP:P1>Object ID B0CC6B27847A368AA04F4171EF6460F4 Software Component 86524CE0304911DEAE48CC6C83461631</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Mapping program is not available in runtime cache: Object ID B0CC6B27847A368AA04F4171EF6460F4 Software Component 86524CE0304911DEAE48CC6C83461631</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Also in the response message see this error message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>application fault</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Please let me for any clues how to handle this error response.
Thanks,
laxman

Hi Laxman,
SOAP Adapter cannot handle fault responses. I understand your issue. You even want to send the errorneous response from the Webservice as a payload back to the sender. But because of application error from Webservice, you are getting an error in the response message (Mapping Not found). SOAP Adapter cannot handle application error (i.e you will not get the errorneous response in form of payload) . For details please read below:
The receiver adapter expects a SOAP message as response. For synchrnous calls, a successful response should be returned with HTTP 200. In this case, the content of the SOAP body will be returned to the caller as the response payload. When some error occurs, the SOAP message may contain the SOAP fault element. In this case, when the fault detail element is not empty, its content will be returned as the fault payload in an application error message. For others, a system error message will be returned to the caller.
HTTP/1.1 200 OK
Content-Type: text/xml; charset="utf-8"
<SOAP:Envelope
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<m:GetLastTradePriceResponse xmlns:m="Some-URI">
<Price>34.5</Price>
</m:GetLastTradePriceResponse>
</SOAP:Body>
</SOAP:Envelope>
will result in an application response message with response payload
<m:GetLastTradePriceResponse xmlns:m="Some-URI">
<Price>34.5</Price>
</m:GetLastTradePriceResponse>
HTTP/1.1 500 Internal Server Error
Content-Type: text/xml; charset="utf-8"
<SOAP:Envelope
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:MustUnderstand</faultcode>
<faultstring>SOAP Must Understand Error</faultstring>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
will result in a system error message.
HTTP/1.1 500 Internal Server Error
Content-Type: text/xml; charset="utf-8"
<SOAP:Envelope
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SOAP:Body>
<SOAP:Fault>
<faultcode>SOAP:Server</faultcode>
<faultstring>Server Error</faultstring>
<detail>
<e:myfaultdetails xmlns:e="Some-URI">
<message>My application didn't work</message>
<errorcode>1001</errorcode>
</e:myfaultdetails>
</detail>
</SOAP:Fault>
</SOAP:Body>
</SOAP:Envelope>
will result in an application error message with fault payload
<e:myfaultdetails xmlns:e="Some-URI">
<message>My application didn't work</message>
<errorcode>1001</errorcode>
</e:myfaultdetails>
In order to send the erroneous response as a payload to the sender, you should develop flow in below manner:
ECC(Proxy) -> PI --> ECC(Proxy)
In PI make a SOAP lookup. The response of the SOAP lookup will contain the response given by the WebService (it can be a vaid response or an application error in WebService). Now map this response to the proxy...In this way you can handle the application error msgs from webservice..
I hope this helps you...
Regards,
Rakesh Sharma

Handling inbound messages in B2B

Dear All
I have problem configurating B2B to receive any inbound message from the IP_IN_QUEUE, local directory or ftp. Basically, the remote partner transport just doesn't go and pick up the incoming messages. All outbound messages work fine. I am using the HL7 protocol.
I have tried to set oracle.tip.adapter.b2b.DocumentRouting=true as recommended in the manual but it doesn't help.
Just wondering any other setting I need to change before the engine is able to pick up inbound messages.
Thanks in advance,
Alan

Dear all,
I can finally recieve an inbound HL7 with MLLP. One strange thing I find is that the Win32 version does not have the option for entering the "MLLP ID". However, I Still do not have much luck with inbound file.
I now have other questions. We want to setup a B2B server to receive all HL7 messages. As the B2B server would process all incoming messages and put it in the IP_IN_QUEUE, how would the BPEL processes know which message they should pickup from the queue? I read something about the document routing ID but it seems that HL7 doesn't have this feature.
Another question, is it possible to adjust the frequency of the B2B server to poll the outbound queue for jobs? We have applications that require very fast response and the current setting just do not serve our needs.
Finally, is it that if we want an inbound queue services in B2B, how long does it take for the feature to be included in the service?
Thank you very much for you help,
Alan

B2B-50037: B2B inbound message processing error

We are trying to implement B2B with Customer EDI X12 850 Inbound with SOA
Application server Version 11.1.1.4.0 (weblogic)
Hitting the following error in the logs
MDS-00013: no metadata found for metadata object "/soa/b2b/EDI_X12/4010/850/New/8504010Viterra.ecs"
Was successful in overcoming all the usual obstacles of finding the TP, Document Type, protocol etc...However hitting the above error. 8504010Viterra.ecs is a custom spec builder document we created and "8504010Viterra.ecs" was browsed from the windows PC into the Document Type B2B set up. I am willing to use a seeded ecs file but do not know how to find one for X12 850 4010 version....?
Went through one SR that asks you upload a group ECS file but that did not help in our case....Following was the SR
"B2B-50037 B2B INBOUND MESSAGE PROCESSING" Error with EDIX12 And DEF 830 VER 200\0 [ID 1357136.1]
Please help
Now at the agreement level, if we set the translate to No and Validate to No then B2B completes normally but we do want B2B to translate the file so that we can get it in XML form for us to transform and process it in BPEL
Any help or hint is really appreciated!

Anuj
THANK YOU SO MUCH!!! I cannot thank you enough for this
I was playing around so much with the document type, the protocol version etc. that i must have inadvertently messed up the repository. I took the export of the data as you suggested, purged the design repository and reimported the zip. I also had to restart the server since the ftp was not kicking in...& wholla! the message got translated into XML and went into the queue
Thanks again
Gopal Iyer
Edited by: ghiyer on Nov 10, 2011 10:07 AM

SOAP version for B2B HTTP inbound message in SOA Suite 11.1.1.7

Similar Messages

Maybe you are looking for