Soft Front Panel PXI-5122 and RealTime

Can anyone tell me if the PXI 5122 Digitizer has a Soft Front Panel that is supported in LabView Realtime (8.6).
When I load the one that is on my system, it doesn't recognize my external pxi chassis hardware.
Thanks.

The soft front panel that ships with the 5122 works only under Windows with devices directly accessible from Windows. Since RT is a separate OS running over a network, the SFP will not work with it. It could be modified to do this, however. I will pass your suggestion on. You may want to consider entering a product suggestion yourself (use this link). Strange as it may seem, suggestions from customers are weighted more highly than suggestions from internal engineers .
This account is no longer active. Contact ShadesOfGray for current posts and information.

Similar Messages

How to test NI PXIe-1085 Soft front panel?

Hello Everyone,
I am unable to test NI RFSG and NI RFSA Soft front panels of NI PXIe-1085.
http://www.ni.com/white-paper/13953/en/ .I am not getting the peaks like in the above link.
I have attached the NI chassis front diagram.
Please help me in this.
Attachments:
NI Pxie-1085 (1).jpg ‏4024 KB

For documentation purposes, I also found the following related KBs:
Configuration Actions when Connecting USB Devices
and
Prevent Auto Start of Measurement & Automation Explorer or SignalExpress for USB
Please note that this seccond link shows the devices appearing the the AutoPlay Configuration screen in Windows 7, this is only true for DAQmx devices and not NI-SCOPE USB devices.
Regards,
Nathan
Product Support Engineer
National Instruments

NI DC Soft Front Panel, minorbug, minor bug with PXI-4110

Hi
The NI DC Soft Front Panel V14.0, with the PXI-4110, the negative voltage scroll, works as expected to -10V, but then rolls over to 0. If one changes in -1V steps, it goes.... -8, -9, -10, -1, -2 ..... instead of -8, -9, -10, -11, -12 ...
While at it, a simple thing I miss is a on/off button for all three voltages.
(Also, imo, it would be logical to get negative voltages with the down arrow, not up).
My 2C
Solved!
Go to Solution.

Hello Janaf,
I fully agree with both of your statements, I have filed a Correction Action Report which you can monitor in next releases of DCPower to see if this is fixed with the SFP. Number of CAR: 512257
I added notes that only manual insertion of numbers less than -10 works and that it was not logical to use increment arrow or up arrow to decrease the voltage output.
Best Regards
Jonas Mäki
Applications Engineering
National Instruments

MAX does not detect my PXI-5122 and PXI-6551 cards in a PXI-1045 chassis.

I have been using a PC with MXI-3 to PXI-1045 chassis to develop LabView TestStand code. Things are fine on my development PC. [Software configuration report attached nireport_rich.txt].
I have a 2nd PC set aside to test my deployment packages. I installed a GPIB card and MXI-3 card in my deployment test PC, and loaded a bunch of hardware drivers. [Report attached nireport_depPC_0006.txt]
All the PXI cards are found just fine when my development PC is connected, but when I power up my deployment PC (with MXI-3 connected to the 1045 chassis) -- I can't import the development configuration [exported from development PC] because the deployment PC does not see the PXI-6551 DIO card in slot 6 [PXI6::10::INSTR] and the PXI-5122 card in slot 13 [PXI8::15::INSTR].
I keep reviewing the hardware driver versions installed, and the only small difference that I see at this point is that the deployment PC has a slightly older version of NI-Switch.
Anybody have any ideas of what I can try next? I'm out of ideas.
. . . . hmmm, can't seem to attach more than one file, so here's the software info on the deployment PC
NI Software Information:
CVI Run-Time 7.0.0.395
NI-DAQ 7.3.0f1
NI-DAQmx 7.3.1f0
NI Script Editor 1.1
NI-DMM 2.3.1
     Soft Front Panel 2.3.0
NI-FGEN 2.2.1
     FGEN Soft Front Panel 2.2
NI-488.2 Software 2.30
IVI Compliance Package 2.2 2.2
LabVIEW Run-Time 7.0
Measurement & Automation Explorer 3.1.1.3003
Measurement Studio 6.0
     For Visual Basic
          ActiveX User Interface 7.0.0.344
          ActiveX 3D Graph 7.0.0.344
          ActiveX DataSocket 4.2.2.1
NI-USI 1.0.2
NI-HSDIO 1.2.1.3
NI-HWS 1.2.2.0
NI-PAL Software 1.8.2.0
NI-SCOPE 2.7.0f5
     SCOPE Soft Front Panel 2.1.0
NI Spy 2.2.0.12
NI-SWITCH 2.30.49153
NI-TClk 1.2
TestStand 3.1
NI-VISA 3.2
     visa32.dll 3.2.0.19
     NiVisaServer.exe 3.2.0.19
     NIvisaic.exe 3.2.0.19
LabVIEW Run-Time 7.1

Hello Maggie,
Appreciate your assistance and reply.
The pxisys.ini and pxiesys.ini files are modified by me with referring to
1)PXI System Alliance PXI-2 SW spec,
2)PXI-6 SW spec,
and 3)pxisys.ini pxiesys.ini generated by MAX v5.3.0f0 with NI PXIe-1075 + NI PXIe-8133.
The content in pxisys.ini/pxiesys.ini generated by MAX looks like simple. Consequently, I modified and checked it line by line according to actual hardware of PXES-2590+PXIe-3975. Then, MAX just list devices as described in the first post. I tried to find the root cause but in vain.
Is this minor issue can be related any incorrect tag lines in pxisys.ini or pxiesys.ini I posted?
Is any suggestion tests I can do to troubleshoot root cause?
Looking forward your reply.
Cheers,
KL Tseng

Using the soft front panel to take a differential measurement.

I have a PXI- 5152 digitizer and need to use the soft front panel to take a differential measurement. I found how to do this by programmatically, but cannot figure out how to do this on the soft front panel. Can anyone help?

Hi Towleb1,
From you second sentence in your question I assume you already found this resource, but just in case I wanted to provide you with a white paper called Differential Measurements Using High-Speed Digitizers. This is a fantastic resource that includes flowcharts and instructions for hardware self-calibration, probe compensation, gain and offset calibration, and actually taking the differential measurement itself.
As far as taking a differential measurement with the NI SCOPE Soft Front Panel, are you talking about taking a single differential measurement or are you talking about taking a differential measurement between two channels on the PXI-5152?
You mentioned that you found how to do this programmatically, but is there a reason you specifically want to use the NI SCOPE Soft Front Panel instead of LabVIEW?
Sam B.
Applications Engineer
National Instruments

Switch Soft Front Panel, Active Device misassigned

I have a PXI chassis with, among other modules, two PXI-2350 switches. Using the Switch Soft Front Panel, it seems the names assigned in the Active Device list ( the two 2350's in this case ) are backwards to what I expect. Is there a way to reassociate these names to the physical 2350's ?
Thanks
Solved!
Go to Solution.

Confustus,
That is an interesting issue that I have never seen before, your devices in Soft Front Panel should be linked to the devices as labeled in MAX. I was wondering, when you say "Using MAX, we can select a route that connects the power source to the DMM using "Switch 1" ( for example ), and we can see the voltage reading show up on the 4071 Soft Front Panel as expected", what exactly do you mean? If you were to select your hardware device and click test panels, the NI Switch Soft Front Panel loads. Are you saying that when selecting test panels and loading Switch Soft Front Panel from max works as expected, however opening the application outside of MAX does not work?
Or are you talking about the Test Panels that you open up within NI Switch Executive? The test panels for NI Switch Executive refer to the NI Switch Executive virtual device name, not the DAQmx device name. If you had named the NI Switch Executive Virtual device name in a similar manner, this could be part of the confusing problems that you are seeing. See images below:
NI DAQmx Test Panel Selection Brings this up.
NI Switch Executive test panel brings this up. If these device names are similar, I can see how this could be confusing.
Frank,
National Instruments
Staff Software Project Engineer

VSG Soft Front Panel

Does a soft front panel exist for the PXI Vector Signal Genreators (5672, 5673E)? I found the http://zone.ni.com/devzone/cda/epd/p/id/5620 but was curious if there was anything similar to the Soft Front panels created for the scopes, specans, etc.. (i.e. NI-RFSA Soft Front Panel,...)
THANKS!

Hi,
Thanks for the post!
There is not a soft front panel for our VSG's. If you want to perform tasks similary to what a SFP might perform, you can use the "Test Panel" in MAX or start with a simple example from the LabVIEW Example Finder.
1. The Test Panel can be opened by locating the RF Upconverter, such as the PXI-5610, under "Devices and Interfaces" in MAX. You can right click on the device (i.e. "Dev1") and then select "Test Panels...". You should get a window that looks like this.
It's a very simple interface that lets you generate a single tone which can be handy for testing connections to a DUT or VSA.
2. If you are programming in CVI or LabVIEW, there are plenty of examples to start from. From the LabVIEW Getting Started Window, click "Help»Find Examples...". Then navigate to "Hardware Input and Output»Modular Instruments»NI-RFSG". From here, there are lots of examples. Which example you'll want to start with will depend on what you are trying to accomlish. There are several examples for different modulation schemes similar to what you posted under the "»Modulation Toolkit" folder.
Please let me know if you have any further questions!
Jon S
Applications Engineer
National Instruments

NI DC Power Soft Front Panel Error - 200247

Hello All,
I am having trouble opening the ni DC power soft front panel. The error message I repeatedly am seeing is below:
When I try to run the vi mentioned in the error above, the same error occurs:
How can I go about getting my soft front panel to work? I have been using the DC power API to execute tests over the past week using the example VI's, but am at a point where the soft front panel would be very helpful to my workflow.
I am using the following:
NI PXIe-4139 SMU
NI PXIe-1082 Chassis
NI PXIe-8360 Controller
Windows 7 64bit
Labview 14
MAX 14.5.0f0
DC Power 14.2
I have tried running the soft front panel using clean installs of DC Power 14.1 and 14.2 and see the same error message. I have uninstalled the other modular instrument driver packages on my computer, NI-Fgen and NI-Scope, reinstalled DC Power, and still I see the error message. It could be that I am not uninstalling these software packages 100% correctly (I use the windows add/remove to NI Remove software dialog process....)
I appreciate any help getting this DC Power soft front panel working.
Thank You,
Andrew Goett

Hi Andrew,
Can you possibly give me a MAX technical report for your system? The instructions can be found here. Use Method 1.
Also, can you check which version of niModInst.dll you have on your system? This file can be found here: <Program Files>\IVI Foundation\IVI\Bin\niModInst.dll
Right-click on the file, select Properties, and then click on the Details tab. The information I need is the "Project version" field. See the image below:
In addition to the MAX report, could you send me a ZIP file of the contents of this folder: <Program Files>\National Instruments\Shared\niModInst
I've attached a simple program (NI-ModInst Code.vi) to test if NI-ModInst is failing across the board or if it only is failing to identify NI-DCPower devices. Open the program, select a driver that you have installed on your system, and run the program. The code should tell you the number of devices you have in the system that are associated with that driver, as well as list out the model numbers for those devices. This list will include simulated devices. Test the code with various drivers in your system to see if you get the same error.
Let me know how this works out.

SCXI Switches not showing up in NI-Switch Soft Front Panel

Hi,
I have an SCXI 1001 chassis containing about a dozen SCXI 1160 switch modules. The first switch module is connected to a PXI-4060 DMM card in a seperate PXI chassis. MAX 4.0 was able to auto-detect the switches, and they show up under the "Devices and Interfaces" folder. However, when I run the NI-Switch Soft Front Panel application, the SCXI switches do not show up as selectable switches. Are there additional properties that need to be configured in order for the Soft Front Panel to detect the SCXI switches? Is there an online manual/guide for doing this?
Thanks in advance for any help.
VRMan

If you have the option of using a DAQmx supported device as the controller for the SCXI chassis, I would recommend changing your SCXI configuration so that your SCXI devices show up in the Soft Front Panel.
If the PXI-4060 (which is not supported under DAQmx) is the only SCXI chassis controller you have, a workaround is to use the Traditional(Old) Soft Front Panel. The Old Soft Front Panel has not been updated with switch modules since NI-SWITCH 2.4 and is not currently supported. But given that you have SCXI-1160s in your chassis, it should work for your use case.
We install the Old Soft Front Panel at Program Files\IVI\Drivers\niSwitch\OldSoftFrontPanel

Ni 5112 soft front panel

Hi:
Can you tell me how to mesuare a voltage of 5.1V on soft front panel? Because I got 5.1 volts on soft front panel, but it stop there and
it did not go back to 0V in a horizontal line.
When I used the real osciloscope, I can get that and it will return to 0 volts after 1 to 2seconds pressing the beep button.
What is wrong with it?
Let me providle my setting on soft front panel.
1Mohm, 100Mhz bandwidth, Y-AXIS 2V/div, offset 0, AC couple, CH0, , X-AXIS 10 microsecond/div, 50% reference, Trigger: edge, rising, ch0, normal, trigger level 2.5V
I am in a urgent. I appreicate if you can reply to me promply

Hi,
Attached is another diagram, maybe it will help
Attachments:
good example.doc ‏88 KB

NI DMM Soft front panel did not detect any ni-dmm

Hello,
has anyone seen this failure? I can´t open soft front panel to setup the dmm. I tried to reinstall VISA and NI-DMM without success.
Thanks
Robert
Solved!
Go to Solution.
Attachments:
NIDMM FrontPanel_Failure.JPG ‏107 KB

Hello,
reinstalling the nidmm and visa will cause several reboots of the system. That was no solution
for me and my problem.
After starting the nidmm, the window with the information, that the 4072 won´t be found shows
a RESCAN button. By pressing the RESCAN button, the error code -1074118656 and the message,
that the device ist not recognized and this version or driver wont fit my 4072.
Should I install the only install the delivered driver or could I update to the actual version?
Delivered was Version 2.5 of NIDMM, installed on my system is the actual one from the NI homepage.
I think, I try to deinstall the NI-SW completely and install "only" the delivered SW. Hope, this will solve.
Robert
Attachments:
Error -1074118656.PNG ‏23 KB

Scope soft front panel signal position

I'm using the new version of the Scope Soft Front Panel, 2.7f0.
How can I change the position of Ch 0 relative to Ch 1. When they are right on top of eachother, its not as clear. The older soft scope allowed them to be moved.
You can see in the attached picture that there is a little action cursor available as I hover over the channel designator on the left. But no action is available.
Anybody know how to do this? I don't want to use the offset values, because then I have to change the trigger levels as well
~~~~~~~~~~~~~~~~~~~~
Paul Johnson
Renco Encoders, Inc
Goleta, CA
~~~~~~~~~~~~~~~~~~~~
Attachments:
New Scope.jpg ‏146 KB

Thanks Raajot,
Unfortunately, the first method does not work. Seems like the channels
move together and can't be separated. However, changing to the classic
mode with the scroll bars works fine.
Its nice having the controls for both channels available in the new
mode, but I can't have the signals laying ont op of each other, so I
suppose I'll just have to stick with the old mode.
Does changing the vertical postion apply to only one channel on your
installtion? On mine, as soon as I pick a percentage, that same value
appears if I pick a different channel on the channel selector control.
Strangely enough, the menu method works fine in the classic mode. I
suspect a bug with the new mode. Otherwise, I'd be able to drag the
channel indicator in the new mode, similar to having scroll bars in
the classic mode.
~~~~~~~~~~~~~~~~~~~~
Paul Johnson
Renco Encoders, Inc
Goleta, CA
~~~~~~~~~~~~~~~~~~~~

NI 5112 Scope soft front panel setting problem

Hi,
I tried to meausre a 5.1 voltage using SCOPE soft front panel. I could get 5.1 AC voltage from SCOPE soft front panel,
but it did not go back to 0 volt after 1 to 2 second in a horizontal line. Nornamlly, my 5,1V will go back to 0 volts
in my oscilloscope after 1 to 2 seconds because I am measureing a shock beep pulse waveform.
Can you tell why?
I am going to give you my setting. I was trying Y-axis 2 volt/div, AC coupe, ch 0, X-axis is 10 microsecond/div. normal mode.
Trigger: edge, rising, ch 0, trigger lever 2.5.
I am in a urgent. Coould you pls send me quickly

I'm sorry if I don't completely understand what the behavior is but if I understand you correctly, you have a signal that goes from 1 volt, peaks at 5.1, and then slowly drops to 1 volt again. That entire signal takes 1 to 2 seconds.
I am not sure if the problem you are seeing is 1. You can never get the full signal in the SFP or 2. You get the signal ok but the SFP does not wait for you to hit a button to try and acquire again.
If the question is number 1
If this is the issue it sounds like you are able to capture the 5 Volt peak, however it never goes back down to 1 volt. You mentioned that you have the X-Axis set to 10 microseconds/ div. Therefore the SFP is only acquiring an total of 100 microseconds, and if the reference is set to 50%, then you are only getting 50 microseconds of signal after the trigger, so you will not be able to acquire the 1-2 seconds it takes for your signal to drop. I would suggest increasing the number of points and slowing down the Time/Division. You should be able to change those settings a few times to actually get 2 seconds worth of signal.
2. If you want to simply hit a button and the SFP will acquire again then you need to change the mode to SGL. Then you just need to hit the run or pause button and the SFP will acquire again.
Message Edited by Evan on 09-12-2005 10:03 AM

How do I create a soft front panel in LabVIEW?

I am experienced with creating VXIPlug&Play drivers for test and measurement equipment. Now I need to create one with a soft front panel. Is there a tutorial that explains how to create the soft front panel? Or could you point me in the right direction? Thanks, Susan

I did a search on google and came up with this link:
http://www.vxipnp.org/vpp7.pdf
Chris_Mitchell
Product Development Engineer
Certified LabVIEW Architect

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

My iPhone is split from front panel on top, and back cover of my is swollen too. I am not able to use my phone and I cannot access my data in the phone. Please suggest what could be the cause of this problem?

It sounds like the battery might have gone bad, and is swelling and causing the symptoms you describe. Do not attempt to use the phone, but take it to Apple for evaluation.

Soft Front Panel PXI-5122 and RealTime

Similar Messages

Maybe you are looking for