Software Center Question

We can advertise any .MSI to "all systems" and workstations can see them in the Software Center. But when any Package (.exe) is advertised to all systems no one can see it in Software Center. is that by design? how do you see
packages in the software center?
mqh7

Take a look at this link for a good explanation of what shows in software center and when:
http://blogs.technet.com/b/configmgrteam/archive/2012/03/31/introducing-the-application-catalog-and-software-center-in-system-center-2012-configuration-manager.aspx
It comes down to what you are deploying and what type of deployment. Also look at user experience settings on the program.
Jeff

Similar Messages

Software Center reporting question

Usually when I push out MS updates they would usually show up in the software center under "Installed software" it doesn't show anything after the updates are installed. It does shows up in windows update under "view update history".
MSB

Correct. That's default behavior.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to clear/reset "Installed Software" in Software Center?

Hello!
I've done a big mistake with my application objects!
I did have two applications in SCCM 2012 with the same MSI-installation package. The reason for this is because i would like to have one that is deployed as Required (with primary device) and one that is deployed as Available for those without primary device.
Then I decided to only keep the available deployment, so i deleted the required appilcation entierly from SCCM.
Not so wise because now all the required installations is stucked in Software Center, at the "Installed Software"-tab. And there is noway to remove it.
So my question is, is there someway to reset or clear the information from software center? Or any other sulotion to my problem? :)
Best regards,
Johan Lång

It seems like it has removed the entries from the software client automatically now. But I still got problem with the main source of the problem. That I cant push out updates via software center.
Let me explain the main problem.
I had app1 as a MSI, and two application objects (AO). One AO as required and one as available, but the same MSI.
After a while I got an integration-application between app1 and another program, as a MSI so i decided to put that as a dependency to app1, but also pushed it out to all users as a required deployment, because it would not install it otherwise, if not the user
did an uninstall and then a fresh install of app1.
And for a couple of weeks ago I got my eyes on "automatically update any superseeded applications" while deploying. So i decided to use that with one AO instead of two (required/available). In the same time an update came to app1, lets call it
app1.1.
This was a perfect time to try my new discover and disabled app1 and superseeded it with app1.1 with a available deployment, with a dependency of the integration-application.
But the clients could not be updated automatically and when the user tried to update it manually via application catalog it get stucked at the last step "evaluate" before it jumps over to Software Center. And nothing else happen. Until it crasches
and warn about "it could not be evaluated" in the application catalog. Sometimes it pops up anyway in software center but it wont continue to install, and if you try to manually start the installation it get stucked at the status "Waiting"
and nothing happens.
If I login with another user I can start the installation manually and it works fine.
If I uninstall the sccm-client and install it back again, the "installed software" will be cleared and I can start the installations manually, so it pops up under "installed software" again. Without any problems.
It also worked to install if i removed the dependency of the integration-application.
So my guess is that something is getting corrupted in the user profile, but I cant find any files regarding sccm in there exept the log file for software center.
I hope you understand abit of what i try to explain :) Sorry for bad grammar!
Regards,
Johan

Software Center Uninstall visible when no program specified

Question on application uninstalls via SW center:
When no uninstall exists for an application (such as a Bios update) , we do not specify an uninstall program.
We would anticipate the uninstall button be greyed out when no program is specified for an uninstall, but this is not the behavior we see (R2Cu1).Rather, we see a uninstall button that simply produces an error.
Jorgen's answer to a similar thread seem to indicate that not specifying an uninstall program will eliminate the uninstall button, are we experiencing a bug or did I misread his answer?
https://social.technet.microsoft.com/Forums/en-US/026f6b65-318d-4e4e-a188-7d5fa151cbba/software-center-disable-uninstall?forum=configmanagerapps
Thoughts?
Will

Hi,
I Just did a quick test with R2/CU3 and deployed Orca as available, without an uninstall command and after the installation the uninstall button was greyed out, after that I added an uninstall command and did a refresh machine policy and the uninstall
button is back..
then removed the uninstall command and did a Machine Policy refresh and application deployment evaluation cycle, could be that it wasn't needed and I didn't wait long enough....
So it seems like it still works that way..
Are you using Packages/programs or Applications? I tested it with applications, package program I do not think it will work this way but you will alwasy have the uninstall button..
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Query or Report Showing Machines/Users Who Have Opted Out of the Power Management Settings via Software Center

Is there a record in the DB of machines which have been opted out of power management? In other words i want a report of machines that have the tick box for 'Do not apply power settings from my IT department to this computer' in Software Center.
Thank you.

Hmmmm, i should have had a coffee before submitting this question!
The report is a default one:
Home > ConfigMgr_[site_code] > Power Management > Power Management - Computers excluded

Software Center shows all apps as "1 MB" in size

Would like to report what we believe to be a GUI BUG in Software Center - that all programs are incorrectly showing "less than 1 MB". Althought it appears to be a GUI bug, it is rather unnerving for some Techs and generate several unnecessary Questions
to us in the CM admins group. It does show the correct size, if we manually click on each and every program/App.
Is it known by MS? Is there a coming Update that fixes the issue?
Many thanks for any help
Justin Nichols MCSE

I'm using R2 CU2 and have the same problem. This issue is not fixed.
I justed filled that as a Connect bug. You can track the response from MS there and feel free to upvote it.
https://connect.microsoft.com/ConfigurationManagervnext/feedbackdetail/view/973329
Benoit Lecours | Blog: System Center Dudes

Unable to unistall application from software center

Hi,
I am unable to uninstall Chrome from Software Center. When i select Chrome and click uninstall, it doesn't seem to do anything.

Check logs to get more details about issue
http://www.scconfigmgr.com/2012/08/15/applications-in-software-center-uninstall-with-removal-failed/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

SCCM Software Center Installed Software

Two questions:
First, when I go into the Software Center and click on the "Installed Software" tab, it is blank although I've successfully installed a few programs since.
Second, when I uncheck "Show Optional Software" nothing appears, although there are several applications listed in the Software Center "Installation Status" tab that are not required and set as an available user initiated deployment.

Hi,
Thanks for the reply. Yes we only use applications. However point 2, some application are just available and do show up.
A workaround is to install the available software again through the application catalog. Then it shows up in the Installed Software tab and can my users un-install it.
So what to do? Thanks.
I'm having the same problem. After every restart the installed software list is empty. Any ideas how to solve this (without the install it again workaround)?

Software Center error. 0x80041013 (-2147217389)

Hi.
When some of our users open Software Center they get this error:
Software Center cannot get the current status for some of the software. Software Center will list any items with available status. You can press F5 to refresh the view. If the problem persists, contact your help desk.
More information:
Loading Software Center teturned error code 0x0041013 (-2147217389).
If they try to start an application via the link "Find additional applications from the Application Catalog" the get this error from
SCClient_XXX@xxx_.log file under c:\windows\CCM\logs:
Exception Microsoft.SoftwareCenter.Client.Data.WmiException: Provider load failure (Microsoft.SoftwareCenter.Client.Common.ClientUXMain at RetreiveDataComplete)
The error code is ProviderLoadFailure (Microsoft.SoftwareCenter.Client.Data.WmiException at get_ErrorCode)
I have tried to uninstall the SCCM client, cleaned up everything and installed the client again. Tried to reset repository under c:\windows\system32\wbem and installed the client again with no luck.
Any ideas?
Thanks.
MHem

see
http://blogs.technet.com/b/configmgrteam/archive/2009/05/08/wmi-troubleshooting-tips.aspx
it's an older article, but very likely to be useful.
Note that ConfigMgr2012 clients should be running a nightly ccmeval, which includes an auto-diagnostic of WMI, so, is ccmeval running? Reporting success/health?
Also, this article describes how to re-register the DLLs and recompile MOFs:
http://blogs.technet.com/b/askperf/archive/2009/04/13/wmi-rebuilding-the-wmi-repository.aspx
based on the symptom you've mentioned, you need to focus on if the WMI repository is healthy or not, and, if the underlying WMI system (providers, registrations) is healthy.
When you uninstall CCM, the CCM namespace should get deleted, and when you reinstall, the CCM namespace gets re-created, but, if the providers or underlying WMI system is unhealthy, the CCM namespace may not be useable.
Is Windows itself healthy? Has something bad happened to a dependency? Other errors in the event logs?
As Joyce says, check the client installation logs to see if related errors were logged when the client installation occurred.
As an example (similar symptom):
http://social.technet.microsoft.com/wiki/contents/articles/14408.troubleshooting-fim-wmi-provider-load-failure.aspx
In this case, something has changed the ACL, causing the provider to be access_denied.
Do you have custom security policies, or security products, which could be denying the service access to the provider?
Another set of hints/tips here:
http://stackoverflow.com/questions/563150/how-can-i-resolve-a-provider-load-failure-for-wmi-requests
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Software Center - Update stuck downloading

Good morning
We have pushed a few updates out to a number of clients via SCCM but for some reason we have an update (KB2962407) which appears to be stuck in the Downloading stage. It's stuck at 50%.
I have manually downloaded this update and installed it to the clients but in Software Center it is still showing up 'Downloading (50%)
I know this update has now been installed.
Is there a way for me to make this disappear or see it as being installed?

Hi,
Are you sure that the update in questions is distributed to the DP that the client use? Normally these issues are related to content not beeing available, boundary / boundary groups noty configured correctly.
Here is a blog post that explains log files and assists in the troubleshooting process.
http://it.peikkoluola.net/2013/12/02/windows-update-sup-troubleshooting-in-sccm-2012/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Software center hidden icon

Guys,
Every time I deploy the agent the software center icon is hidden. That means the user only sees a brief popup that a deployment is avaliable . Is there anyway registry key or such that controls this ?

Hi,
In the notification area you mean?, a script like this should do it.
http://superuser.com/questions/318088/make-tray-icon-always-show-for-all-profiles-in-windows-7
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec
thank you . this works !

SCCM 2012 SP1 - Software Center appears twice in Start Menu

Hi guys,
i just finished implementing a fresh SCCM 2012 SP1 Installation for a customer. The whole OSD works like a charm (except some issues with the latest Windows updates breaking the whole OSD, will open a separate thread for this soon), but after the deployment
the Software Center is appearing twice in the Start Menu (We're using Win7 Enterprise SP1 x86 English with 5 integrated language packs). I first thought this has something to do with the integrated language packs, but both Start Menu entries
are always in the same language.
The strange Thing is, that one entry for the SCCM Software Center is called "Software Center" and the other one "SoftwareCenter" (without a space). We configured 2 Client policies, one with EP-enabled and one without EP. We
deployed the Client Settings to different collections so i don't think that this is causing the Problem?Do you guys have any idea why this is Happening?
Has anyone ever seen this? See a screenshot below:
Thank you.
Cheers
Stefan

Thanks for your Response Thomas.
I don't think it is related to the upgrade to SP1.I think it might be a General issue in SP1. I started with a fresh SCCM 2012 SP1 Installation and i also have 2 Software Center entries in my start menu. If i check the shortcut i can see that one shortcut
was created when i captured my base Image, the other one was created during the Install OS Task Sequence.

Security updates takes long time to install through Software Center

Hi Folks,
We have a setup with SCCM 2012 R2 CU4 as a Primary Site server where SUP also enabled. I deployed the windows security updates to the test servers collection by deployment type as Available.
I verified in test servers that all the deployed security updates are listed under Software Center client, but when I checked all the updates and tried to install. it is taking long time to install . Most of the time the updates are in “waiting to install”
status and finally ends up in failed state with error codes 0xc80003f3, 0x8007000e. Have verified all the logs windowsupdate.log, Updatesdeployment.log, WUHandler.log are points to the same error code. Found that multiple SVChost.exe process consumes more
memory during patching process.
However we have enough physical memory(2 GB) and page memory( Min 2 GB to Max 4 GB) configured on the servers (Windows 2012 R2 SP1) . Need some guidance in further troubleshooting...

Most of the servers managed by me today are having anywhere 2 - 4 GB RAM installed. How do one install the security patches through SCCM with this configuration?. Selecting more than 4 patches at the same time to install does gives memory errors.
I would suggest 4GB RAM for a modern Server OS e.g. WS2012R2 is simply too little memory.
There have been quite a lot of issues in recent months, relating to Software Updates, affecting WSUS and also ConfigMgr, e.g.
http://blogs.technet.com/b/configurationmgr/archive/2015/04/15/support-tip-configmgr-2012-update-scan-fails-and-causes-incorrect-compliance-status.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

0x87D01280 "Virtual application is currently in use" error when uninstall App-V Office 2013 in Software Center

Getting the above error message when attempting to uninstall Office 2013 App-V version (downloaded using ODT) in Software Center. There are no office 2013 or App-V processes showing as running in Task Manager. Nothing in event viewer to show what is running
either. Any idea on what could be running and holding the uninstall from completing?

Hello,
These issues are caused if the virtual package is used during the attempt to uninstall.
SFTMIME is a legacy command-line interface for App-V 4.6, not supported for usage with App-V 5 (which is the only version that supports Office 2013).
App-V 5.0 SP2 has introduced the ability to divert required actions to next logoff / reboot depending on publishing, if the package is in use.
See these articles;
http://www.applepie.se/app-v-5-0-sp2-and-pending-removal-update
http://blogs.technet.com/b/virtualvibes/archive/2013/12/03/pending-tasks-in-app-v-5-0-sp2.aspx
Nicke Källén | The Knack| Twitter:
@Znackattack

Getting "Error: 0x80070654" when trying to install SCCM 2012 R2 Console from Software Center

What I did:
Created a Package Source share on the Site Server
Gave the Package Source Share the following Share permissions: SCCM Admins: Full Control, Domain Computers: Full Control, Local Admins: Full Control.
Copied the "Program Files\Microsoft Configuration Manager\tools\ConsoleSetup" folder to my package source (Since the Package Source is actually on the site server, I just copied the ConsoleSetup folder to it that is on the same drive)
Created a package and a Standard Program
Command line: ConsoleSetup.exe
I deploy it to my collection
Run Machine Policy and Reevaluation on my Right Click Tools
Go to one of my clients and open up Software Center and click the Install button
It fails with ""Error: 0x80070654"
I open up execmgr.log on the client using CMTrace and I use the error lookup tool and it shows that the 0x80070654 error is "This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer
package"
I also see a red highlighted line in the execmgr.log file with the following entry: "Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020"
I can run ConsoleSetup.exe using a command line to the package source.
Execmgr.log Contents
Policy arrived for parent package PRI00013 program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 6l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3336 (0x0D08)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramOfferReceivedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094048.938000+000";
MachineName = "My Computer";
ProcessID = 1548;
SiteCode = "PRI";
ThreadID = 3336;
execmgr
7/31/2014 2:40:48 AM 3336 (0x0D08)
Raising client SDK event for class NULL, instance NULL, actionType 6l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:40:48 AM
3568 (0x0DF0)
Validating chain of dependent programs for package PRI00013 optional program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Validating package PRI00013 program SCCM 2012 R2 Management Console in the chain. The content request ID is {00000000-0000-0000-0000-000000000000}
execmgr 7/31/2014 2:41:04 AM
4612 (0x1204)
Creating an optional execution request for package PRI00013 program SCCM 2012 R2 Management Console
execmgr
7/31/2014 2:41:04 AM 4612 (0x1204)
Requesting content from CAS for package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Successfully created a content request handle {CBABEBB0-D019-4421-8B2E-47ABF90A925F} for the package PRI00013 version 1
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistWaitingContentEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094105.334000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
PackageVersion = "1";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4612;
execmgr
7/31/2014 2:41:05 AM 4612 (0x1204)
Successfully raised SoftDistWaitingContentEvent event for program SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from NotExist to WaitingContent
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4612 (0x1204)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4260 (0x10A4)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:05 AM
5072 (0x13D0)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: OnContentAvailable
execmgr
7/31/2014 2:41:10 AM 4756 (0x1294)
[{CBABEBB0-D019-4421-8B2E-47ABF90A925F}]: Content Version 1 is available for advert , pkg: PRI00013, program SCCM 2012 R2 Management Console.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
An existing MTC token was not supplied, using ExecutionRequest's Id as MTC token and this execution request is the owner of resultant MTC task.
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Request a MTC task for execution request of package PRI00013, program SCCM 2012 R2 Management Console with request id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from WaitingContent to Ready
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 0 to 4
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
Processing [{CBABEBB0-D019-4421-8B2E-47ABF90A925F}, 0]: RemoveNotification
execmgr 7/31/2014 2:41:10 AM
4756 (0x1294)
MTC signaled SWD execution request with program id: SCCM 2012 R2 Management Console, package id: PRI00013 for execution.
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Sending ack to MTC for task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program ConsoleSetup.exe in Admin context
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Execution Request for advert package PRI00013 program SCCM 2012 R2 Management Console state change from Ready to NotifyExecution
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Checking content location C:\Windows\ccmcache\eo for use
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Successfully selected content location C:\Windows\ccmcache\eo
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Executing program as a script execmgr
7/31/2014 2:41:10 AM 4328 (0x10E8)
Successfully prepared command line "C:\Windows\ccmcache\eo\ConsoleSetup.exe"
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Command line = "C:\Windows\ccmcache\eo\ConsoleSetup.exe", Working Directory = C:\Windows\ccmcache\eo\
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Running "C:\Windows\ccmcache\eo\ConsoleSetup.exe" with 32bitLauncher
execmgr 7/31/2014 2:41:10 AM
4328 (0x10E8)
Created Process for the passed command line
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramStartedEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
CommandLine = "\"C:\\Windows\\ccmcache\\eo\\ConsoleSetup.exe\"";
DateTime = "20140731094111.028000+000";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4328;
UserContext = "NT AUTHORITY\\SYSTEM";
WorkingDirectory = "C:\\Windows\\ccmcache\\eo\\";
execmgr
7/31/2014 2:41:11 AM 4328 (0x10E8)
Raised Program Started Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value NULL, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4328 (0x10E8)
MTC task with id {C9942D47-8A99-4363-AE69-A6F813336239}, changed state from 4 to 5
execmgr 7/31/2014 2:41:11 AM
4612 (0x1204)
Program exit code -2147023276 execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Looking for MIF file to get program status execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Script for Package:PRI00013, Program: SCCM 2012 R2 Management Console failed with exit code 2147944020
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
instance of SoftDistProgramErrorEvent
AdvertisementId = "PRI2000A";
ClientID = "GUID:C83A938E-8BD7-4207-A450-11B3FE063DD6";
DateTime = "20140731094111.506000+000";
ExitCode = "-2147023276";
MachineName = "My Computer";
PackageName = "PRI00013";
ProcessID = 1548;
ProgramName = "SCCM 2012 R2 Management Console";
SiteCode = "PRI";
ThreadID = 4756;
UserContext = "NT AUTHORITY\\SYSTEM";
execmgr
7/31/2014 2:41:11 AM 4756 (0x1294)
Raised Program Error Event for Ad:PRI2000A, Package:PRI00013, Program: SCCM 2012 R2 Management Console
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Execution is complete for program SCCM 2012 R2 Management Console. The exit code is -2147023276, the execution status is FailureNonRetry
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
MTC task with id: {C9942D47-8A99-4363-AE69-A6F813336239} deleted successfully.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 10l, value Result:FALSE, user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Requesting MTC to delete task with id: {C9942D47-8A99-4363-AE69-A6F813336239}
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
This execution request does not have a corresponding task in MTC.
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
Raising client SDK event for class CCM_Program, instance CCM_Program.PackageID="PRI00013",ProgramID="SCCM 2012 R2 Management Console", actionType 1l, value , user NULL, session 4294967295l, level 0l, verbosity 30l
execmgr 7/31/2014 2:41:11 AM
4756 (0x1294)
CServiceWindowEventHandler::Execute - Received SERVICEWINDOWEVENT : END Event
execmgr 7/31/2014 5:00:00 AM
2928 (0x0B70)
Thanks

Cool, mate it is then.
Yeah it either changed or there is a typo.
I re-created everything and I still get that same 0x80070654 error.
This is really frustrating
Anyway, here is what I see in the AppEnforce.log:
+++ Starting Install enforcement for App DT "SCCM 2012 R2 Management Console" ApplicationDeliveryType - ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision - 1, ContentPath - C:\Windows\ccmcache\ev,
Execution Context - System AppEnforce
7/31/2014 11:27:30 PM 4256 (0x10A0)
A user is logged on to the system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Performing detection of app deployment type SCCM 2012 R2 Management Console(ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, revision 1) for system.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
+++ Application not discovered. [AppDT Id: ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef, Revision: 1]
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
App enforcement environment:
Context: Machine
Command line: consolesetup.exe /q TargetDir="%ProgramFiles%\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 2
Content path: C:\Windows\ccmcache\ev
Working directory:
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared working directory: C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Prepared command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Executing Command line: "C:\Windows\ccmcache\ev\ConsoleSetup.exe" /q TargetDir="C:\Program Files\ConfigMgr" EnableSQM=0 DefaultSiteServerName=my.site.server with user context
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Working directory C:\Windows\ccmcache\ev
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Post install behavior is BasedOnExitCode
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Waiting for process 2792 to finish. Timeout = 120 minutes.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Process 2792 terminated with exitcode: 2147944020
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Looking for exit code -2147023276 in exit codes table...
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
Unmatched exit code (2147944020) is considered an execution failure.
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)
++++++ App enforcement completed (0 seconds) for App DT "SCCM 2012 R2 Management Console" [ScopeId_DF08DF3D-39F7-4840-B17C-92FCAB02F116/DeploymentType_00b14782-2bc3-4c88-bc19-9d12981bc4ef], Revision: 1, User SID: ] ++++++
AppEnforce 7/31/2014 11:27:30 PM
4256 (0x10A0)

Software Center Question

Similar Messages

Maybe you are looking for