Software library not available message

I have tried to reconfigure the em control.
The following error occured:
Software Library has not been setup !
Please configure Software Library and try again.
How do I fix this ?

For setting up the OEM GC software library check:
Oracle® Enterprise Manager Administrator's Guide for Software and Server Provisioning and Patching
http://download.oracle.com/docs/cd/E11857_01/em.111/e16599/infrastructure_setup.htm#BABBFGFG
For manual config check the MOS note I mentioned
Regards
Rob

Similar Messages

  • Windows support software is not available

    I'm running MacOS 10.6.8 (Snow Leopard) on a 1st-generation Macbook (Core Duo, won't run Lion). When I tell Boot Camp Assistant to download the Windows support software, I get a message that "The Windows support software is not available." I do have the Snow Leopard install disc, but it (obviously) did not come with my computer so it seems like I should not use that option. How can/should I proceed?
    Never mind, right after posting (despite previously searching for relevant discussions), I found my answer in a different thread. According to Fortunny, this is not required for Boot Camp 3.0.

    Correct. The Windows support/driver software is on your OSx install disk unless you are running Lion. If running Lion you download the support software.

  • Software updates not available

    I downloaded the new IOS 7 via Wi-Fi with my iPhone 4. After download completed IOS 7 doesn't want to install. I get this message : software update not available for the moment. Try later.
    Anyone have this issue?... Is there any procedure for this?
    Thanks,
    Al

    Alanders wrote:
    I downloaded the new IOS 7 via Wi-Fi
    Connect to iTunes on the computer you usually Sync with and “ Restore “...
    http://support.apple.com/kb/HT1414

  • I am getting a Mobile Network Not Available message when trying to make phone calls

    I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

    Statosphere II
    I've reset most everything, taken out battery/replaced, also set up roaming (all)
    Can't check voicemail either
    Thank you!

  • I am trying to install windows on my mac via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available.

    I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006  via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?

    You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
    Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation

  • EDI: Partner profile inbound not available Message no. E0337

    Hi Friends,
    I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
    EDI: Partner profile inbound not available
    Message no. E0337
    Diagnosis
    An inbound partner profile could not be found with the following key:
    /0040000010/LI/VN/INVOIC/MM///
    This involves the key fields of table EDP21:
    -SNDPRN  partner number of sender
    -SNDPRT  partner type of sender
    -SNDPFC  partner function of sender
    -MESTYP  logical message type
    -MESCOD  logical message code
    -MESFCT  logical message function
    -TEST    test flag
    I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
    When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
    None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
    Please let me know your thoughts, what could be possible reason and a solution.
    Thanks
    Deepak

    Hi Deepak,
    I am facing the same problem with a different message type.
    But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
    Have you found the reason for this?
    Thanks,
    Florian

  • CIMC on C210 server throws Error 2001: Service not available message

    I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available"  message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
    Thanks in advance!
    Jess

    I got it working on one of the servers, and havent tried the same solutions on any other server.
    What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
    I'm not sure if it will work on the rest of the servers, but it's worth a try
    Regards
    Alex

  • Cloud for Customer 1405 Studio software is not available in Service market place.!

    Hi All,
    Cloud for customer 1405 studio software is not available in the service market place. Can any one know's from where we can download the 1405 studio software.??
    Regards,
    Mani

    Mani,
    The links will be updated soon with the 1405 version of the studio along with the release to market of the generic Cloud for Customer solution offering.
    I will update you as soon as the version goes live on the SMP via this thread.
    You may use the following link to access the studio with its versions on the SMP.
    Thank you.

  • In App Purchase showing "Service Not available" Message box with error code 805a01f4

    Hi all ,
            I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
    in a bit . This error code may be helpful : 805a01f4 ." 
    Please tell me how to resolve .
    Thank you

    Thanks for your response .
    I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After  few seconds got a message on my number that "Dear customer,
    thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ? 

  • I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

    Welcome to the Apple Community Michael.
    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • My phone is saying "software update not available at this time" - is anyone else seeing this?

    my phone is saying "software update not available at this time" - is anyone else seeing this?

    With everyone and their iDogs trying to update at the same time, things are gonna be a bit bumpy off the bat trying to update and/or activate.

  • Why do people using other brands of smart phones get a "not available" message when they try to view vids that I made on my iPhone 4s?

    I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.

    I have the same exact problem. let me know if you figured anything out

  • "NOT AVAILABLE" Message keeps popping up on tv

    Hello!
    I have had my television for about two years not, and the past year, the "NOT  AVAILABLE" message has been popping up.  At first not so much, but now more often than not.  The message become quite annoying as it stays displayed on the screen while watching tv.  It also disables the remote control.  How can this be fixed?
    Thanks
    Liss

    I found how to fix it myself.
    In my case, something was wrong with the signal comes from the button control on the left side of the TV.
    ========================
    What I did
    ========================
    unplug the power cord.
    Remove back cover.
    Look into the motherboard ( biggest green at the center).
    First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
    I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.
    I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
    I then disconnect the nearby connector that comes from the side control buttons.
    Turn on the TV by remote, press menu button on the remote to check. The menu stays.
    DONE.
    I use electric tape to seal off the connector and let it hanging there.
    Close the TV back panel
    I have been watching TV for 3 nights without menus/channels scrolling.
    NOT AVAILABLE red message when watching DVD is no longer existed.
    Hope this help someone else.

  • Driver software is not available from Apple

    Was using an HP LaserJet 1020 without any problems until last week, when it just gave out and it shows the following error every time: "driver software is not available from Apple". Have tried to install the latest drivers but it won't allow it with the same error.
    Also tried following these instructions http://blog.jayway.com/2010/04/08/hp-laserjet-1020-in-snow-leopard/ but it gets stuck on the third step. The driver list can't be opened and it reads "driver software is not available from Apple" again.
    Any suggestions?

    From what I can tell from online research, HP never claimed the 1020 printer series was compatible with Macs or has ever developed any OS X drivers for them. For instance, from the "Specifications" tab of this product info page:
    Because of that, I'm kind of amazed that you ever got your 1020 to work with any version of OS X, unless some sort of hack or third party driver was involved. If so, you might want to check with the originator of that workaround to see if there are any new developments that would get it working again.

  • How do I download the windows support software for my Mac? I am getting an error  message saying that the software is not available

    How do I download the windows support software for my Mac? I am getting an error  message saying that the software is not available

    Welcome to Apple Support Communities
    I do not recommend you to download the Windows support software through Boot Camp Assistant.
    Instead, you can download the Windows support software for most Macs from the Apple website. Go to this website, look for your MacBook Pro model and the Windows version you want to install, and follow its steps.
    To install Windows > http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf

Maybe you are looking for

  • How can I add a user to the current session context ?

    Hello, I would like to use the programmatic authorization of servlets ( the roles are defined in the servlet deployment descriptor web.xml ). But I don' t use the authentication specified in the servlet deployment descriptor. Is it possible to popula

  • Creating a pdf from Webdynpro iview using "WebDynpro Java"

    Hi everybody,        I have a requirement like creating a pdf file from the iview content in a web dynpro project.          Can any one explain me the procedure as well as code how to create a pdf from the table content using the "WebDynpro Java".  T

  • Timezone issue with Node manager

    Hi We have a strange problem in our Weblogic manager server as below. We started the manage server & Node manager in Jan 2011, when the daylight saving was on., then when time zone changed to winter time to summer time, node manager was unable to pic

  • Link External PDF file to Portal reports

    Created a javascript function to dynamically build a url to call a pdf file from a form by a link, however there is not an ounce of information to do the same from a QBE report. Please steer me in the right direction, of if you have an idea -- please

  • Aperture Exporting JPEG's from RAW: file size and quality questions?

    Hey Everyone, So, I'm using Aperture 2 and I've got some questions about exporting from RAW to JPEG. I shoot with a Nikon D70 so original RAW files are 5-6mb in size. After doing some basic post processing when I export the pics at "full size" with p