Software Update 6.1.1 - Not worked!

Since the latest software update to the iphone 4s my 3G signal is abysmal. I'm talking about the latest 6.1.1. which was meant to solve issues. My imessages take ages to be sent & tend to turn into text messages & also the internet can take over 5 minutest to load. Any advice on what I can do as it's beyond frustrating. Thanks

Your iPhone has been jailbroken.
The Terms of Service of the Apple Support Communities forbid discussions about jailbroken iPhones.
Good luck.

Similar Messages

  • My iWeb will not open...I tried software updates...still not working.

    my iWeb will not open...I tried software updates...still not working

    Are you saying that the application does not launch or that your domain file with the site in it doesn't open?
    OT

  • Software update and iLife help not working in Admin account

    For the last few weeks (maybe since iLife 11 was installed) software update and iLife help has quit working on the single administration account on my iMac. All works fine on the secondary accounts.
    If I try to use software update it says everything is up to date, even though I know there are updates available that can be seen if checking from a different account on the machine. In iLife, if I try to access the help files it tells me I need to download them. I click to download and after a few seconds it takes me back to the front help page and I then go through the entire process again but the help download never happens. On secondary accounts the help files work no problem.
    I've tried many of the tips for deleting helpfile plists, but nothing seems to work for me.
    Can any kind person list for me everything I should look to delete or move in the account to get these things working again?
    It would be much appreciated!

    Since the issue is specific to your original user account, you can proceed in two ways. One is to log into your new account, make a list of the preference files (plists) located in /username/Library/Preferences/, including any in the ByHost subfolder, log back into the original account, move everything on that other account's list from the original account's Preferences folder into a newly created folder on the Desktop, log out and back in, and see if the problem goes away. If so, you can copy the ones in the Desktop folder (one at time) back into /Preferences/, restart, and see if the problem returns. If so, you've identified the corrupt/conflicting one. Continue with all of them until isolating the bad ones. That'll save you the trouble of resetting preferences.
    The second way is much more detailed and I'll not burden you with the steps unless the above doesn't fix the issue.

  • Software Update Point Switching is not working for some Clients

    Hi there,
    I found nothing similar here and I hope this is the right section.
    I´m running ConfigMgr 2012 R2 where one of the Site Systems from one of the Primaries is located in an untrusted Forest in a perimeter Network. The Site System there has the MP, SUP and DB Roles. In general it works great. The Systems in that untrusted Forest
    get the SCCM Agent pushed, see and can install published Software packages and receive Windows Updates. But there are a few systems where everything works, except Windows Updates.
    So I had a deeper look at what is happening and found out that the SUP switching is not working for them. They always try to contact the SUP from the Primary, which they cannot reach (this is intended).
    From how I understand SUP switching as described here
    http://blogs.technet.com/b/configmgrteam/archive/2013/03/27/software-update-points-in-cm2012sp1.aspx#pi140062=1
    the Windows Update Agent tries to connect to a SUP every 30 minutes and after 4 failed attempts he will try to connect to the next one until he finds one which works.
    As I said before, this seems to work for most systems in the untrusted forest, but some do not make any intentions to switch the SUP.
    So my next step was to find out from where the Update Agent can get the information of the available SUPs. I think they either don´t receive the information that other SUPs exist, or if the Information is there, they don´t realize that there´s an error and
    make no attempt to switch.
    I used the System Center Support Center to gather all Information from some of the systems with that problems (Log Files, WMI information, registry information, policies etc.) but I cannot find where SCCM or the Update Agent store the information which SUPs
    are available in my environment.
    I´m sure the problem is on the Systems which fail to connect to the right SUP and not in the SCCM infrastructure itself, because for most of the systems everything is working just perfect. Unfortunately in the Blog Post above there´s also no information
    where this information is stored and how it is obtained by the clients. In the comments there´s even one post which describes the same problem I have here, but there was no answer. I hope someone can point me into the right direction, because I´m stuck currently.
    Things I tried additionally to all the log file / WMI / registry sniffing:
    Removing the Software Distribution Folder and restarting the Windows Update Agent
    Removing the WindowsUpdate Registry folder in the HKLM\SOFTWARE\Policies\Windows section in the Registry and restarting the Windows Update Agent.
    Tried to reset the WUAgent with wuauclt /Resetauthorization additionally to the steps above.
    I also tried to manually set the WUServer and WUStatusServer Keys in the registry to the new Server, but as soon as the next Update Scan cycle runs, the value is set back to the URL of the Primary Sites SUP
    Is someone having additional ideas? It seems to me older systems are more affected (which were configured for a standard WSUS before SCCM 2012 was deployed) than newer ones which were installed when SCCM was in place already. But I don´t know what else to
    "reset" on those machines without reinstalling them.

    Thank you very much for your response. I must have missed that one by looking through numerous Logfiles. In this, there´s indeed a list of all available SUPs. So according to the LocationServices.log the machine should have a choice.
    The WMI Key however, contains just one entry and this is the URL of the Primaries SUP which is not reachable in the untrusted forest. Is it OK that the WMI entry includes only one entry? If yes, what process is putting the results from the LocationServices
    into WMI? It seems like the Windows Update Agent is feeded from the WMI Key then. If this is the case my problems seems to be the "communication path" between these two components.
    Is this the job from the SCCM Agent, the Windows Update Agent or maybe some third component I´m not aware of? I wonder how I can fix this.

  • Installed 10.7.3 software update, HP printers do not work anymore

    I installed the latest software update. None of my HP printers work anymore. I have an HP Deskjet 2330, and an HP C5580 All In One. I tried resetting and then I added the printers again. It did not work. I have a 13 inch Mac Book Pro that was made in early 2011. It has a 2.7 GHz Intel Core i7 processor and 8GB of memory.
    When I use my all-in-one as a copy machine, it works fine.  When I try to print something in it, I get a message that it is sending data to the printer and then nothing happens. The printer just sits there. The 2330 has a different problem. It acts like it is printing, but no images form on the paper. I replaced the ink cartridge and it made no difference. I tried cleaning the print heads on both but got an error message after a while. Both printers worked well for years. The problem started suddenly after the software update. I find scattered complaints on the web about this, but nothing particularly helpful for my situation. Help!

    Are the printers connected to the Mac via USB or are they networked.
    If they are USB connected, then you could try a reset of the printing system. This will remove all devices from Print & Scan, but not the supporting drivers, so you will only have to add the printers again.

  • Apple software update for windows does not work properly

    Apple software update does not work properly

    I FIXED IT!! I can't believe it . I actually figured out how to make it work(well sort of). My Apple Software Updater now works (almost) perfectly and I just successfully downloaded and installed itunes 10.6.3.25 through it!!!
    Ok , the way I see it, either the latest itunes update or the recent Windows Patch Tuesday on June 12th, 2012 must have inadvertently removed the Administrative Rights from the Apple Software Update Tool .lnk file.
    So you must go to where the file resides on your hard drive - for me that was C:\Program Data\Microsoft\Windows\Start Menu\Programs - Right click on the Apple software Tool icon and choose properties. Click on the compatibility tab. At the bottom of this tab click on "change settings for all users" and hit Yes at the UAC pop-up. Now make sure you place a check in the "Run this program as Administrator" under the Privilege level section at the bottom. Hit Apply and then OK. The hit Ok again to get off the properties pop-up.
    When I went back and clicked on the Apple Software Update shortcut, I got a UAC pop-up asking me if I wanted to proceed(something I had always, in the past, gotten but haven't since this problem started). The Apple Software Update tool came up and to my suprise the progress bar STAYED and started to slowly fill up partially with the green progress bar. Viola, the itunes 10.6.3 update showed up on the top part of the screen as a new update needing to be installed - the bottom screen, as usual, had the changelog info for the 10.6.3 update. I clicked on install and , again, Viola. the update downloaded and installed flawlessly. I had to reboot my computer and when it restarted, itunes was working perfectly and it was correctly showing as itunes v10.6.3.25.
    I say it is almost or sort of fixed because when you click on the Apple Software Update shortcut after the 10.6.3 install it goes back to doing the same thing it did before(i.e. processing for a second and then saying there are new updates but showing a blank field). Maybe this is the way the software now looks if there are no updates available to install - maybe Apple is working on this to eventually get it back to normal. All I know is the process I outlined above worked for me(at least to get the ASU to recognize and properly download and install itunes 10.6.3). It's certainly not perfect, but it worked. Please try this method and let me know what results you have with it. Good luck.

  • HT1414 after a software update the device is not working properly and can not open any website.

    I can operate it properly after an software update . Now no website cannot be opened and cannot get emails. Main thing cannot go to tunes and app store .

    First Try This...
    Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
    Reset  ( No Data will be Lost )
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    If no joy... Try a Restore...
    1: Connect the device to Your computer and open iTunes.
    2: If the device appears in iTunes, select and click Restore on the Summary pane.
    Restoring  >  http://support.apple.com/kb/HT1414

  • I need to do a software update but it does not work

    i tried to download some programs and they say they need updated versions of safari and java but when i went to download the java update it said to just use the software update. so i did but it keeps saying "Your software is up to date Software Update doesn’t have any new software for your computer at this time." does anyone know how i can up date this thing!?

    Without knowing either what Mac you have, or which OS, I would guess that you have a PPC and cannot update either to 10.6 or 10.7, which is required to run those apps.

  • Software update for iphone does not work

    although I have a well functioning connection with the internet after loading the actual update 4.3.1.for my iPhone 4 it says sth. like time out fault, check your internet connection or try later
    I am using windows vista
    anyone having the same problem or can help ?
    thanks

    Do you mean you're having a problem trying to download the update, install the update, after the update is installed trying to re-activate the phone? I assume you're getting this message on your PC, not the phone...? Or are you having problems with Internet connectivity on the phone itself? WiFi or 3G?
    If it's problems on the PC, try disabling all antivirus/firewall software and see if that takes care of it.

  • Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    Updated my iphone4 with ios6.1 software. App store is not working. Tried rebooting, restoring, changing date, signing with another apple id etc. but no luck. can someone please help?

    I guess I will wrap this up. I have abandoned iPhoto and viewing my Photo Streams using it and moved to Adobe products (Bridge + PS). So that's that.

  • HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

    Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

  • Software Updates Missing and File Not opening in Final Cut Pro

    Hi Experts,
    I am having trouble with Final Cut Pro. Here goes:-
    I tried to load up a FCP file called "Overview" in Lesson One of the Apple Pro Training Series book called "Color". The file would not open and I got the following message alert in FCP:
    "File's format is too new for this version of the application".
    I am running FCP 6.0.1 and so went to check for software updates. I could not find any listed for FCP. I did a quick internet search to make sure and found there were indeed updates to 6.0.1.
    So I guess I have 2 problems:
    1. Why won't a file from a book that was published before I bought FCP work on my app?
    2. Why can't I see updates for FCP in the Software Update application?
    I am mega stuck with this. I have read of similar problems to mine on the internet but have found no solution. I hope that you will be able to help me out.
    Thank you all,
    Bob

    Hi Nick!
    Thanks for your reply. I feel kinda silly now but I have been continuously checking Software Update for 24hrs and I just got a new addition to the list which was called "Pro Applications Update 2008-05".
    Seeing something new, I installed it and it upgraded my Final Cut Applications including FCP to version 6.0.5.
    The file then opened.
    I am truly sorry to have taken your time up. As when I posted last time Nick, you were very prompt and helpful.
    All the best,
    This problem is solved for me and I hope all the other people having this problem find this update as luckily as I just did.
    Bob

  • Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

    Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an I-Tunes software update, but I am not sure.  Is this likely a software issue or is the shuffle not working correctly?

    Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all.  There is no "device" folder in the left column.  This may have occured after an I-Tunes software update, but I am not sure.  Is this likely a software issue or is the shuffle not working correctly?

  • HT201343 I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

    I have an Early 2011 MacBook Pro from Early 2011 that is a 13-inch model... why won't it support airplay? why can't I get a software update to allow it to work?

    About AirPlay and Airplay Mirroring
    AirPlay Mirroring requires a second-generation Apple TV or later, and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). For non-qualifying Macs you can try using Air Parrot.
    Several Apple Articles Regarding AirPlay
    Apple TV (2nd and 3rd gen)- How to use AirPlay Mirroring
    How to set up and configure AirPort Express for AirPlay and iTunes
    About AirPlay Mirroring in OS X Mountain Lion
    iTunes 10- About playing music with AirPlay
    Troubleshooting AirPlay and AirPlay Mirroring
    Using AirPlay
    Thanks to the $15 Beamer, AirPlay streaming is still possible on Macs  that do not support Airplay and mirroring.
    Another solution is the Air Parrot.

  • The software update server (nrc1) is not responding

    the software update server (nrc1) is not responding
    I have been receiving this message on my Snow Leaopard iMac for weeks now when I try Software Update ....
    There appears to be nothing in the Communities database about it, my internet connection works fine and always has ... any ideas?

    Some things you can try:
    1. See if software update works from another account.
    2. Boot in safe mode.  See if SU works.  If so, reboot normally and try again.
    3. If those don't work maybe you need to delete the software update cache.
        ~/Library/Caches/com.apple.SoftwareUpdate/
    Note there are two plists assocated with SU but I don't think deleting them will change anything since there is nothing significant in them.  They are,
    ~/Library/Preferences/com.apple.systempreferences.plist
    ~/Library/Preferences/ByHost/com.apple.SoftwareUpdate.XXXXXX.plist
    where the X's are a sequence of hyphenated upper case leters and digits.

Maybe you are looking for