Software Update doesn't show all updates available

I have multiple G4 iMacs that are running OS 10.4.8. When I go to software update it doesn’t show any of the following updates as available
Security Update 2007-001
Security Update 2007-002
Daylight Savings Time Update
I have tried reinstalling the 10.4.8 Combo upgrade and have run the disk utility fix permissions multiple times. I also reset the ignored updates with no difference.
Some of my 10.4.8 computers see the updates and install them and some don’t.
Any Ideas??
G4, G5 workstations   Mac OS X (10.4.8)  

Hi Robert and welcome!
At the risk of upsetting the powers-that-be, there have been issues noted with the updates when downloaded from Apple's server or via Software Update.
Go to VersionTracker and download them from there. I did, and had no problems.

Similar Messages

  • Software Update doesn't show all updates?

    I'm setting up a PowerBook G4 with 10.4, starting with a basic install of 10.4.0 on a blank disk, then using Software Update to tell me what's needed to bring it up-to-date. After a couple of rounds of installations (starting with 10.4.10) and restarts, I began to wonder: Why haven't I seen any AirPort updates in Software Update? The AirPort utilities now installed are v.4.1.1; I have installers for 4.2 and two related items: AirPort Update 2005-001 and Security Update 2006-005. Why doesn't Software Update list these? What else is Software Update not telling me? If I can't count on Software Update to tell me everything I need, what good is it? Anyone have any thoughts?

    Well, yes, I guess that's why the installer for Security Update 2006-005 tells me it cannot install because "This volume does not meet the requirements for this update." However, the Combo update does not include AirPort 4.2 or the AirPort Update 2005-001, but Software Update does not suggest installing them, though there's an AirPort Extreme card in the PowerBook (in fact, that's what I'm using to run Software Update). I did install them, but had I been relying entirely on Software Update, I wouldn't have known about them.

  • OS X Mavericks iPhoto not installing/updating, doesn't show in updates

    After updating to os x mavericks I couldn't accessing iPhoto and when trying to update iPhoto suddenly vanished from the Updates section in the App Store. When I searched for the app the option to update changes between "Update" and "Installing". Has it updated? Is it installing? What is happening?
    I am terrified I've lost all my photos! Advice would be much appreciated!

    It's doing exactly what is says - installing.

  • HT1338 I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    I'm trying to download java on my Mac machine but the software update doesn't show me anything. Please advise what I should do to get the application.

    If you can run it under chrome, you have java installed.
    There was some malware that exploited an older version of Java (not javascript) running in a Browser. Since few people use it Apple turned off Java by default in the Safari Browser.
    If you need it for something, just turn it back on in Safari preferences (inside Safari). After a few months of non-use, you may find it has turned itself off again.

  • HT5525 my iphoto is version 9.2 and doesn't show any updates avail when i check for updates. how do i update to latest iphoto then?

    my iphoto is version 9.2 and doesn't show any updates avail when i check for updates. how do i update to latest iphoto then?

    Launch the App Store application and log in with your Apple ID.  Check to see if iPhoto is available in the Updates section.
    OT

  • EFI firmware update doesn't show up?

    Wondering why the EFI firmware update doesn't show up for me in Software update? My firmware is: MP31.006C.B03
    Supposedly after the update its supposed to be: MP31.006C.B05
    Does this mean that I don't need the update?

    CapNemo wrote:
    Thanks for all the replies. I guess the problem is that I haven't yet installed the Leopard Graphics update. Since everything is running so well right now I didn't want to mess with it.
    So what's the story, should I or shouldn't I install the Leopard Graphics Update and the EFI Firmware update? I've never experienced the wake from sleep problems because I have Energy Saver set to "never" sleep.
    It might be wisest not to, but then it's hard to say. The
    firmware update might address some nasty issues we don't know
    about. Or it might be targeted specifically at the reboot issue.
    How can we know? There's very little information on the download page.
    It's a gamble, sorry to say.
    One thing: I'm not super convinced you'll need that graphics
    update after the EFI update has been applied. It would be surprising
    if Apple made the machines reliant on something not included with
    the original install disks.
    You might try this very risky (caution: possibly dangerous; at your
    own risk only) thing: applying the graphics update and then manually
    reverting it from a backup after installing the EFI update.
    Note this though: the EFI update is essentially irreversible.
    In a couple of months, graphics update 2 will likely be available, if
    history repeats itself. You might wait until then, and take that risk
    instead

  • System Update keeps failing "Package did not download" and does not show all updates

    I recently installed win8 64-bit on my X1 (1294-2PG) using a clean install formatting the hard drive. Now I want to use System Update to install right drivers. Two problems occur:
    System Updates fails to show all the updates available for my PC in the website. Only 2-3 updates are shown.
    System Updates repeatedly fails to download the chosen updates. It seems to download most of the file when the download suddenly halts and I get the message: "1 Package did not download" or 2 or 3 depending on the number of updates.
    I have tried for several days multiple times a day and even uninstalling/reinstalling System Update. The errors keeps occurring.

    sorry... i can't help with why TVSU isn't successful with this driver on your machine.
    as a workaround, you may wish do download it from the X1 driver matrix:
    http://support.lenovo.com/en_US/research/hints-or-tips/detail.page?&DocID=HT051705
    driver: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014952
    hope this helps a bit.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • HT1222 I need to update my husbands iPad but it doesn't show a update but he has ios4

    I need to update my husbands iPad but it doesn't show a update but he has ios4

    If you mean that it doesn't show the Settings > General > Software Update option then that only appears when you have iOS 5+ installed, with iOS 4 you will need to do the update via your computer's iTunes.
    Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change - but google have app versions in the store.

  • TVSU - T410 253725G not showing all updates

    T410 253725G not showing all updates - Can anyone help ?
    Also. When I try to download the graphics driver through update retriever or TVSU it fails to download.
    Attached is log from TVSU - cna anyone explains why these downloads fail?
    log file : https://docs.google.com/open?id=0B53zUuJBT4FsbHFuW​U1BSWo2UDQ
    Joe

    Do you have Microsoft .NET Framework version 1.1 SP1 or later?
    *edit* Try installing this update:
    http://support.lenovo.com/en_US/detail.page?Legacy​DocID=MIGR-74429]
    This is under the Summary of Changes section: " Fixed an issue where ThinkVantage System Update failed to install the NVIDIA display driver".
    Let me know if this helps.
    Did you find a post awesome? A great response? Kudo them!
    Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

  • After iOS 5 update my iCal shows all my registered Birthdays one day earlier. Can anybody help? thx

    After iOS 5 update my iCal shows all my Birthdays one day earlier. Please help. thx

    Same issue here.  In searching through Apple Discussions site I see this has been happening for at least 5 years now were b-days can pop up 1 or even 2 days early.  Really Apple?  I am disappoint. 

  • ICal doesn't show all text for the activity

    When I updated to iCal version 8.0 i noticed that when I am in week-view, iCal doesn't show all the text for an activity, although there is plenty of room. For example I have a lecture from 9 am - 4 pm and in the activity I put down all the things I have to do, but it only shows the first line for my activity. I need to drag the box or double click on it to see all the text. Can I change this?

    Gabriella,
    Sometimes making the Calendar window bigger, or using full screen allows additional text to be displayed.
    View>"Make Text Smaller" is also an option for those with Eagle Eyes.

  • Scrollbar doesn't show all text in RichEditableText component ...

    The program is loading text from an external XML-file into a RichEditableText component.
    However, scrolling an scrollbar does not show all the available text.
    To me, it looks like the scrollbar is not updated to adopt itself to the new text.
    Does someone has any pointers, how to fix this, because I have no clue where to look?
    Thanks in advance,
    Peter
    Code snippets:
    The bindable 'data' is filled with an html-formatted text, when the XML-file is loaded.
    TextFlow is used to display the html-formatted text.
    MyTextScrollPanel component contains VScrollBar and component MyTextScrollPanelScrollingContentSkin:
    <s:VScrollBar id="vscrollbar" left="185" right="0" top="0" bottom="0" fixedThumbSize="true"
    viewport="{contentGroup}" />
    <components:MyTextScrollPanelScrollingContentSkin id="contentGroup" clipAndEnableScrolling="true"
    left="0" right="20" top="0" bottom="0"/>
    MyTextScrollPanelScrollingContentSkin component:
    <fx:Script>
              <![CDATA[
              [Bindable] public var data:String;
              ]]>
    </fx:Script>
    <s:RichEditableText id="textContent" d:userLabel="Text" x="0" y="0" width="185" height="682"
                                  editable="false" selectable="false" color="#ffffff"
                                  fontFamily="Myriad Pro" fontSize="12" tabStops="S0 S50 S100 S150 S200"
                                  textFlow="{TextConverter.importToFlow(data, TextConverter.TEXT_FIELD_HTML_FORMAT)}"
                                  whiteSpaceCollapse="preserve" >
    </s:RichEditableText>

    One (practical) solution I came up myself, is adopting the height of the RichEditableText to the length of the data:
    <s:RichEditableText id="textContent   ...  height="{data.length}"      .... />
    A practical height value turns out to be {data.length/2}, indicating that 50% of the text is html-tags and whitespaces (??)
    Does someone knows or could point to a more elegant solution?
    Note: the division "/2" worrows me, since the customer is proving the text.
    Thanks,
    Peter

  • HT1600 Apple TV software 6.0 not showing up as available

    Apple TV software 6 is not showing up as available to download in settings. Any other way to download?

    There have been several posts of failures of updates - Apple may have temporarily removed the update.
    I'd wait.
    Your other option would be to connect to iTunes via and restore to current using a microUSB cable, see the restore process:
    http://support.apple.com/kb/HT4367
    Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.

  • M3000: show-disks doesn't show all disk.

    Hi all,
    I have to setup one M3000, when I want to create a devalias, I type show-disks, but it doesn't show all the disk, it only show 2
    a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
    b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
    So, a is disk0 1 2 3 ?
    and
    b is disk 0 1 2 3?
    thanks
    Please help
    ====================================================
    {0} ok probe-scsi-all
    /pci@0,600000/pci@0/pci@8/SUNW,qlc@0
    QLogic QLE2560 Host Adapter FCode(SPARC): 2.03 06/30/08
    Wait for link up -
    Firmware version 4.03.02
    Fibre Channel Link down
    Possible causes: No cable, incorrect connection mode or data rate
    SFP state: 8Gb Present
    /pci@0,600000/pci@0/pci@0/scsi@0
    MPT Version 1.05, Firmware Version 1.31.00.00
    Target 0
    Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
    SASAddress 50000393e813d912 PhyNum 0
    Target 1
    Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
    SASAddress 50000393d84aaf3e PhyNum 1
    Target 2
    Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
    SASAddress 50000393d84ab082 PhyNum 2
    Target 3
    Unit 0 Disk TOSHIBA MBF2600RC 3706 1172123568 Blocks, 600 GB
    SASAddress 50000393e8392a42 PhyNum 3
    Target 4
    Unit 0 Removable Read Only device TEAC DV-W28S-W J.0A
    SATA device PhyNum 4
    {0} ok
    {0} ok show-disks
    a) /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
    b) /pci@0,600000/pci@0/pci@0/scsi@0/disk
    c) /iscsi-hba/disk
    q) NO SELECTION
    Enter Selection, q to quit: a
    /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk has been selected.
    Type ^Y ( Control-Y ) to insert it in the command line.
    e.g. ok nvalias mydev ^Y
    for creating devalias mydev for /pci@0,600000/pci@0/pci@8/SUNW,qlc@0/fp@0,0/disk
    {0} ok

    Hi.
    It's not bug, it's a feture. :)
    show-disks show available controlles, that can have connected disk.
    For create alias you should manualy add what disks exactly you want use.
    disk0 /pci@0,600000/pci@0/pci@0/scsi@0/disk@0
    disk1 /pci@0,600000/pci@0/pci@0/scsi@0/disk@1
    disk2 /pci@0,600000/pci@0/pci@0/scsi@0/disk@2
    disk3 /pci@0,600000/pci@0/pci@0/scsi@0/disk@3
    Generaly this aliases alredy created at POST.
    Check output of devalias
    Regards.

  • IPhone doesn't show all music when I connect to network in iTunes

    Hi
    In iTunes Preferences on my Mac I've ticked the button to make all my music available over the network.
    When I use the Share option in iTunes on my iPhone it doesn't show all the music on my Mac. Is there something else I should set to make this work?
    Thanks
    Flybridge

    PUSH

Maybe you are looking for