Solaris 10 3/05 installation from cd

the installation hang on the "discovering additional network configuration..."

When does it happen?
Maybe your computer is not connected to the network.
During installation process, you will be asked to configure your network, after the configuration, setup program checks the network, and if your computer is not connected it will take a long time (like hanging) and after you will get error message.

Similar Messages

  • Solaris 8 - Installation from network

    Hi,
    Can I to install Solaris 8 from network, booting installation from diskette?
    I have the packages downloaded from www.sunfreeware.com in my disk, but no encountred how install this SO.
    Thank you.

    I'm not quite sure what you are asking. Solaris 8 is not available from sunfreeware, only additional freeware packages to be loaded after Solaris is installed. Solaris 8 can be downloaded and "burned" to CD from : http://wwws.sun.com/software/solaris/binaries/get.html

  • Solaris 8 Intel Installation Error: No suitable hard drives found

    HI!
    I was trying to install the free Solaris 8 Intel Edition from CD. All devices were recognized. Afterwards, however, I get the message that no suitable place was found to store the installation image. What should a hard disk look like in order to qualify for Solaris?
    My system contains several hard drives. The first one, were I would like to install Solaris, is empty without any partitions. Under normal cicumstances (Linux, Windows), I would assume that this is the best possible case for a new operationg system...
    Best regards
    Klaus

    Klaus,
    I am having the exact same problem as you. I have the official Solaris CDs from Sun, but am not able to install Solaris on my PC. Installation progresses quite far - including screen, keyboard, time configuration - but then fails saying that it can't find any suitable HDDs.
    I too, have two HDDs, one with Windows XP on it, and the other completely blank. However the Solaris installation does not recognise either of them.
    I've even tried dis-connecting the Windows HDD in case it may have interfered somehow, but it has no affect.
    Please see me message titled 'Intel Installation - Identifying HDDs' which I posted on this forum on 10th November. I haven't received any help on this issue.
    Where do we go from here?

  • Can't boot Solaris 10 during installation

    I am stuck up with a petty problem while booting Solaris 10 1/06 from the installation CD no.1. The GRUB boot loader appears fine, but when I try to boot the Solaris kernel and module, a message appears
    Error 28: Selected item cannot fit into memory
    My x86 computer's configuration is as follows:
    Intel Pentium 4 processor 2.83 GHz
    RAM 128 MB
    HD 80GB
    I can't figure out whether the problem is really due to insufficient memory or do I need to install more RAM on my platform.Can someone help me out with this?

    128mb is plenty of memory. No it isn't plenty of memory. Solaris 10 Update 1 or Solaris Express needs at least
    256mb of memory. The initial root ramdisk that is loaded from the CD/DVD
    uncompresses to ~ 128mb already, leaving no space for the SunOS kernel on a
    system with only 128mb of memory!

  • How to prevent a solaris user to telnet from multiple computers

    Hello,
    How to prevent Solaris users to telnet from multiple computers? They should be able to telnet from only one PC.
    Please help..

    ora_tech have a good point, i was about to suggest ipfilter, which is a built-in-firewall in Solaris, but using tcp wrappers would probably be easier. It all depends on which level of security you want (blocking the telnet requests in a firewall would generally be safer than blocking them at the tcp wrapper level, since its prevents some processing).
    Since Solaris 10 you can also easily enable tcp wrappers on the inetd services with inetadm, see:
    http://blogs.sun.com/gbrunett/entry/tcp_wrappers_on_solaris_10
    .. for more details..
    .7/M.

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Remove windows Installation from Old WD hard drive and Install Fresh Copy on the New One.

    Hi Community! I just bought a new WD Blue 1 TB hard drive, my old hard drive is WD Blue caviar 500 GB, running on Windows 7 ultimate 32 bit.
    There are two things I wish to do: 1. Firstly, if it's possible, I would like to copy some videos, images, music etc. from my OLD Drive to the new one.
    Please note that, I don't have an external disk to do it, I know that would've been less complicated, but that's not an option at this point. 2. Secondly, once that is done, if possible, I want to remove windows 7 installation from my old hard drive, re-partition it to make it just the storage drive, and finally install
    fresh copy of windows 7- 64 bit to the new Hard drive.
    Please note that, my old Hard drive is installed on windows 7- 32 bit and now I want to install a fresh copy of Windows 7-64bit instead of 32bit, because I am upgrading my
    configuration with better ones.
    I am adding 4 GB corsair vengeance ram to my 2 GB corsair ram, so that is 6 GB in total.
    I am adding 1 TB hard disk to my 500 GB Hard disk, so that is 1500 GB.
    Both my processor and mother board supports 64 bit.
    Intel® Pentium® Processor G2020 (3M Cache, 2.90 GHz) And this Mother board - "Biostar H61MGV3"I know that you could clone the partition and migrate the installation from one hard drive to another using the Acronis True Image WD Edition Software, but I don't want that.
    In simple words, say I have a dos computer, I installed my 1TB WD hard drive, installed a fresh copy of windows 7-64bit. So my computer is up and running. Now, I have another hard
    drive which I wish to use, that is 500GB WD, but it has Windows 7-32 bit installed in it.
    So what I want to do is, make this old hard drive a complete 500 gb storage device and remove the windows installation from it, without loosing music, videos, etc. and then lastly
    copying the music and other media to the new hard drive, and formatting it completely.
    I am perhaps making this very complicated, I know you would have better easier solution for this.
    I am frustrated, your help would be appreciated, thanks a lot. Sincerely, Abe

    Since you don't want to clone the drive (I agree with you), you can just swap drives and install Windows on the new drive. Windows won't complain that you are installing on a different drive because it only cares if you change more than one piece of hardware at a time. The problem will arise when you copy the files from the old drive because you cannot just connect it via SATA. That would confuse Windows, as both installations were run on that hardware. You need to mount it in an external dock via USB 2.0/3.0 which will isolate the details of the OS. After you copy all necessary files, you can use WDC Lifeguard to write zeros to the entire disk and then create a new partition. After that you can mount it via SATA because it will be a new drive. Do NOT be in a hurry to wipe the drive however, as you don't want to forget something.

  • Using Windows 8.1 with Directx11, when I lauch Photoshop Elements Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the

    Using Windows 8.1 with Directx11, when I lauch Photoshop Elements 12 Organizer, I see the error message "DirectX could not be initialized. Please be sure that it is installed on your system. You can download the latest DirectX installer from:[URL] I have the latest version, Directx11, as verified by running dxdiag.

    Maybe you need to enable Direct Play under Legacy Components in the Turn Windows Features on or off dialog.
    1. Right click on the windows start Logo on the taskbar, select Control Panel and click on Programs
    2. Under Programs and Features click on Turn Windows Features on or off and then under Legacy Components enable Direct Play

  • My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

    My MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."
    Checking in the log revealed the following error:
    Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
    Error!! Error Domain=NSURLErrorDomain Code=-1202 "UNTRUSTED_CERT_TITLE" UserInfo=0x1086bec80 {NSLocalizedDescription=UNTRUSTED_CERT_TITLE, NSLocalizedFailureReason=UNTRUSTED
    The rest of the line is cutted off. Does anyone know what went wrong and how to fix it ?

A: my MacBook Air becomes unresponsive when logging in, and I decided to reinstall OS X Lion. When running the installer from OS X Recovery, it gave the error message "An error occurred while preparing the installation. Try running this application again."

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

I encountered the same exact problem when I attempted to re-installed OSX Lion on an old laptop. The date was set back in 2000, which rendered the certificate obsolete. Here's how I fixed it:
From the recovery menu, select the Terminal application. Run the 'date' command to confirm the date is wrong, then set the correct date using this command: date {month}{day}{hour}{minute}{year}
e.g. date 1219195613
Exit terminal (type exit). Retry the installation.

  • ITunes installation from CD

    I know someone with a Dial-Up modem connection that wants to get the latest version of iTunes installed on their computer. Rather than having them sit for hours to download over dial-up is there a way for me to get the iTunes software (PC or Mac) from the Apple Web site and put it on CD or DVD? I have a high-speed internet connection so not an issue.
    Any help would be appreciated.

    Download the installer from here:
    http://www.apple.com/itunes/download/
    Save it to a CD or memory stick.
    Copy the file to your friends desktop and run the installer from there.

  • Install Nagios agents on Solaris 10 to monitor from RHEL 5

    Hi,
    Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
    Thanks
    Rao

    Hi Sugunakar,
    There are a few small things I can think of checking:
    I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
    Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
    smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
    /var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
    I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
    Regards,
    [email protected]

  • Best procedure to downgrade a SQL Server 2012 SP2 installation from Enterprise edition to Standard edition

    Hi,
    following a purpose change for a database server, I need to downgrade the SQL Server 2012 SP 2 installation from Enterprise to Standard edition.
    Does it exist the best procedure to do it in a secure manner with a low impact?
    Many thanks

    Please note that while you are downgrading by uninstalling and reinstalling and then restoring backup  taken from 2012 enterprise to standard , if backup contains data about used enterprise features you would not be able to restore the backup so BE
    CAREFUL.
    You should , if possible, get a new box install SQL Server standard and try restoring backup if it fails disable enterprise features and again take backup and then you would be able to restore.
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • Template Installer from Java to BI error in SLD

    Hello Gurus,
    I've install my BI system system (ABAP Only)  and my Portal system (Java Only). Now I'm running the template installer from http://host:53800/nwa.
    I'm getting an error at the very first step "Test SLD connection:It was not possible to test the SLD system (SLD_HOST) with the user (SLD_ADMIN)  and its password ".
    The anoying thing is, I can see that both system (BI & Portal) are registered in the SLD, when checking the "visual administrator -> "SID" -> Server xx -> Services -> Configuration adaptor -> CTC -> Propertysheet " I can see that the user is SLDDSUSER and and is pointing to the correct host & port.
    In SM59 I've create the RFC pointing to the already created JCO.
    In http://host:53800/webdynpro/dispatcher/sap.com/tcwdtools/Explorer, when running the test, I can see that is pointing to the SLD in the portal system and not my SLD.
    I went trough OSS note 983156 and follow it.
    Does anybody have any idea about this?
    Thanks & Regards
    Jaime Esteves

    Hello Jaime Esteves,
    I have the same problem. Did you solve this issue?
    If yes, how?
    Regards, Michael

  • How do I stop the Adobe Reader Installer from crashing?

    I downloaded install_reader10_en_air_mssa_aih.exe and this popup appears:
    Microsoft Visual Studio Debugger
    An exception occurred. Process will be terminated. (Exception address is 00413E6C).
    If I leave it open for a while, it eventually says:
    Just-In-Time Debugging
    An exception 'Runtime Error' has occurred in Script.
    However, no debuggers are registered that can debug this exception. Unable to JIT debug.
    When I tried opening a second copy, I did not get this popup, but instead received a different message:
    Adobe Reader Installer
    Installation encountered errors
    Actionlist not found

    Try the offline installer from http://get.adobe.com/reader/enterprise/

  • HT5655 The new Flash installer from Adobe still isn't working, right?

    The new Flash installer from Adobe still isn't working, right? We get the "installation failed" messages, and we're awaiting Adobe's follow-up on it?

    AdmrlLocke wrote:
    Adobe Acrobat 8 has two problems on my iMac. The lesser problem comes when I go into the Print command and click "Preview." I get a message that says that Preview isn't supported.
    Preview is not supported because building a preview of a print job under OS X involves creating a .PDF file. You already have a .PDF file open if you're using Acrobat, so there's no point creating a new one.
    The greater problem just cropped up as I was writing about my problems with Quicktime and Real Player: Acrobat tried to update itself and then gave me a message that says, "Cannot overwrite file /Users/(myname)/Documents/Update5/AdobeUpdater/acrobat8pro-en_US/AUMProduct.dmg .
    That's not a problem with Acrobat. The system is saying that you have a file named AUMProduct.dmg in place already, and you don't have permission to update it. You need to change the permissions on that file so that you can update it, or to use an account which has update permission. Or it might just be locked and you need to unlock it. Locate it using the Finder (you have the complete path to the file listed above) and see what permissions are on the file and whether or not it is locked.
    You might also just put the entire Update5 folder into the Trash and try updating again.
    The file maybe be locked or you may not have sufficient access rights. Please make sure you have write access to this file." Can anyone help? Thanks.

    • Maybe you are looking for